15 Best Boss Fittings

 

Dixon Valve B28 Plated Iron Boss Fitting Female Spud 2 Hose ID x 2 NPT Male

Dixon Valve B28 Plated Iron Boss Fitting, Female Spud, 2″ Hose ID x 2″ NPT Male

Dixon Valve B28 Plated Iron Boss Fitting, Female Spud, 2″ Hose ID x 2″ NPT Male - Works with existing fitting. Dixon valve boss-fitting female spud. 2-inches hose id and 2-inches npt male. Easy to seal. Made of plated iron. Recommended for steam service up to 450 degree f.

 

Dixon RGB13 Stainless Steel 316 Boss Fitting Ground Joint Spud 1 NPT Female x 1 NPT Male

Dixon RGB13 Stainless Steel 316 Boss Fitting, Ground Joint Spud, 1″ NPT Female x 1″ NPT Male

Dixon RGB13 Stainless Steel 316 Boss Fitting, Ground Joint Spud, 1″ NPT Female x 1″ NPT Male - Recommended for steam service up to 450 degrees f. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Spud for connecting a ground joint stem to a ground joint fitting. Polymer seat for chemical resistance. Connects to a male npt threaded connection on one end and a female npt threaded connection on the other.

 

Dixon Valve B16 Plated Iron Boss Fitting Stem 1-14 Hose ID x 1-14 NPT Male

Dixon Valve B16 Plated Iron Boss Fitting, Stem, 1-1/4″ Hose ID x 1-1/4″ NPT Male

Dixon Valve B16 Plated Iron Boss Fitting, Stem, 1-1/4″ Hose ID x 1-1/4″ NPT Male - Made of plated iron. Dixon valve boss-fitting stem. Recommended for steam service up to 450 degree f. 1-1/4-inches hose id and 1-1/4-inches npt male. Easy to seal. Works with existing fitting.

 

Dixon Valve B21 Plated Iron Boss Fitting Stem 1-12 Hose ID x 1-12 NPT Male

Dixon Valve B21 Plated Iron Boss Fitting, Stem, 1-1/2″ Hose ID x 1-1/2″ NPT Male

Dixon Valve B21 Plated Iron Boss Fitting, Stem, 1-1/2″ Hose ID x 1-1/2″ NPT Male - Plated iron for strength and resistance to corrosion. Maximum temperature of 450 degrees f. 1-1/2″ npt male end for connecting to female fitting and a barbed end for connecting to hose with a 1-1/2″ id. Use with boss clamps and boss washer seal fittings. Adapter for connecting steam hoses or fittings of different types.

 

Dixon HU206200 Forged Steel Boss Fitting Hammer Union with Mounted O-Ring 2 Size 2000 psi Pressure

Dixon HU206200 Forged Steel Boss Fitting, Hammer Union with Mounted O-Ring, 2″ Size, 2000 psi Pressure

Dixon HU206200 Forged Steel Boss Fitting, Hammer Union with Mounted O-Ring, 2″ Size, 2000 psi Pressure - With grey sub, blue nut. Runs air, water, oil or gas up to 2,000 psi nscwp (nonshock cold working pressure). Made of forged steel. Ambient temperature 70 degree f. 2″ size. Boss fitting hammer union threaded 206 series.

 

Dixon B16-600S Solid Brass Steam Quick Disconnect Boss Fitting Poppet Valve Coupler 34 Coupling x 34 NPT Female

Dixon B16-600S Solid Brass Steam Quick Disconnect Boss Fitting, Poppet Valve Coupler, 3/4″ Coupling x 3/4″ NPT Female

Dixon B16-600S Solid Brass Steam Quick Disconnect Boss Fitting, Poppet Valve Coupler, 3/4″ Coupling x 3/4″ NPT Female - Steam quick connect coupler for connecting directly to a hose with female npt threads to connect with a male npt threaded connection. Poppet valve coupler with a female npt threaded end. Designed exclusively for steam applications. Poppet-style shut-off valve prevents fluid loss when disconnected, 2 ethylene propylene o-rings provide protection against leaks. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, stainless steel springs and locking balls to resist scaling and corrosion, and ethylene propylene seals for use with water and steam and resistance to ozone and weather.

 

Dixon Valve BGF36 Brass Ground Joint Boss Fitting Complete Female 1 Hose ID

Dixon Valve BGF36 Brass Ground Joint Boss Fitting, Complete Female, 1″ Hose ID

Dixon Valve BGF36 Brass Ground Joint Boss Fitting, Complete Female, 1″ Hose ID - Easy to seal. Recommended for steam service. Works with existing fitting. 1-inches hose id. Dixon valve boss-fitting complete female. Made of brass.

 

Dixon Valve W27 Nitrile Rubber Boss Fitting Washer 2 Hose ID

Dixon Valve W27 Nitrile Rubber Boss Fitting, Washer, 2″ Hose ID

Dixon Valve W27 Nitrile Rubber Boss Fitting, Washer, 2″ Hose ID - Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. It is made of nitrile rubber bonded, non-asbestos klingersil c-4401 for abrasion resistance and adhesion to metals. It fits a 2″ dixon washer seal coupling. This dixon w27 washer fits a steam hose boss coupling to provide a leak-proof seal. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. This washer is suitable for use in steam service with a maximum temperature of 450 degrees f and is compatible with dixon’s boss washer style spud (rb28) and stem (rb26). The company, founded in 1916, is headquartered in chestertown, md. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.

 

Dixon Valve W12 Nitrile Rubber Boss Fitting Washer 34 Hose ID

Dixon Valve W12 Nitrile Rubber Boss Fitting, Washer, 3/4″ Hose ID

Dixon Valve W12 Nitrile Rubber Boss Fitting, Washer, 3/4″ Hose ID - They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. It fits a 3/4″ dixon washer seal coupling. This dixon w12 washer fits a steam hose boss coupling to provide a leak-proof seal. It is made of nitrile rubber bonded, non-asbestos klingersil c-4401 for abrasion resistance and adhesion to metals. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. This washer is suitable for use in steam service with a maximum temperature of 450 degrees f and is compatible with dixon’s boss washer style spud (rb8) and stem (rb6). Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. The company, founded in 1916, is headquartered in chestertown, md.

 

Dixon Valve WBC Nitrile Rubber Boss Fitting Washer 38 Hose ID

Dixon Valve WBC Nitrile Rubber Boss Fitting, Washer, 3/8″ Hose ID

Dixon Valve WBC Nitrile Rubber Boss Fitting, Washer, 3/8″ Hose ID - It is made of nitrile rubber bonded, non-asbestos klingersil c-4401 for abrasion resistance and adhesion to metals. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. The company, founded in 1916, is headquartered in chestertown, md. This dixon wbc washer fits a steam hose boss coupling to provide a leak-proof seal. This washer is suitable for use in steam service with a maximum temperature of 450 degrees f and is compatible with dixon’s boss washer style female spud (cc) or male spud (wmc) and stem (ca). They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. It fits a 3/8″ dixon washer seal coupling.

 

Dixon RLP36 Stainless Steel 316 Boss Fitting Male NPT End Stem 3 Hose ID Barbed

Dixon RLP36 Stainless Steel 316 Boss Fitting, Male NPT End Stem, 3″ Hose ID Barbed

Dixon RLP36 Stainless Steel 316 Boss Fitting, Male NPT End Stem, 3″ Hose ID Barbed - 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. End stem for connecting a hose to a pipe or fitting. Hose barb on one end and male npt threads on the other. Barbed fitting for a tight seal on hoses.

 

Dixon Valve GM18 Plated Iron Boss Fitting Spud 1-14 Male Thread

Dixon Valve GM18 Plated Iron Boss Fitting, Spud, 1-1/4″ Male Thread

Dixon Valve GM18 Plated Iron Boss Fitting, Spud, 1-1/4″ Male Thread - Easy to seal. Works with existing fitting. 1-1/4-inches thread. Made of plated iron. Dixon valve boss-fitting male spud. A leakproof seal is formed when the metal head of the stem makes contact with the patented polymer seat in the spud. Recommended for steam service.

 

Dixon Valve GF3 Plated SteelIron Boss Fitting Ground Joint Complete Female 38 NPT Male x 38 Hose ID

Dixon Valve GF3 Plated Steel/Iron Boss Fitting, Ground Joint Complete Female, 3/8″ NPT Male x 3/8″ Hose ID

Dixon Valve GF3 Plated Steel/Iron Boss Fitting, Ground Joint Complete Female, 3/8″ NPT Male x 3/8″ Hose ID - Copper seat for resistance to corrosion. Plated steel and iron for strength and durability. Maximum temperature of 450 degrees f. Barb on one end for connecting a hose with a 3/8″ id and a 3/8″ npt connection on the other end. Stem, female spud, and wing nut for a complete steam hose coupler.

 

Dixon Valve B18 Plated Iron Boss Fitting Female Spud 1-14 Hose ID x 1-14 NPT Male

Dixon Valve B18 Plated Iron Boss Fitting, Female Spud, 1-1/4″ Hose ID x 1-1/4″ NPT Male

Dixon Valve B18 Plated Iron Boss Fitting, Female Spud, 1-1/4″ Hose ID x 1-1/4″ NPT Male - Recommended for steam service up to 450 degree f. Easy to seal. Dixon valve boss-fitting female spud. 1-1/4-inches hose id and 1-1/4-inches npt male. Works with existing fitting. Made of plated iron.

 

Dixon Valve WF3 Plated SteelIron Boss Fitting Complete Female 38 Hose ID x 38 NPT Male

Dixon Valve WF3 Plated Steel/Iron Boss Fitting, Complete Female, 3/8″ Hose ID x 3/8″ NPT Male

Dixon Valve WF3 Plated Steel/Iron Boss Fitting, Complete Female, 3/8″ Hose ID x 3/8″ NPT Male - 3/8-inches hose shank and 3/8-inches npt male. Works with existing fitting. Recommended for steam service up to 450 degree f. Easy to seal. Made of plated steel/iron. Dixon valve boss-fitting complete female.