16 Best and Coolest Magnetic Rolls

 

Master Magnetics Flexible Magnet Strip with Adhesive Back  116 Thick 2 Wide 100 feet 1 Roll

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 2″ Wide, 100 feet (1 Roll)

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 2″ Wide, 100 feet (1 Roll) - Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description. Magnet withstands temperatures from 0-150 degrees fahrenheit made in usa. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Magnet holds on one side only and is rated at up to 26 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel. Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement.

 

Master Magnetics Flexible Magnet Strip with Adhesive Back  116 Thick 1-12 Wide 100 feet 1 Roll

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 1-1/2″ Wide, 100 feet (1 Roll)

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 1-1/2″ Wide, 100 feet (1 Roll) - Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Magnet holds on one side only and is rated at up to 19-1/2 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel. Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Magnet withstands temperatures from 0-150 degrees fahrenheit made in usa.

 

Master Magnetics Flexible Magnet Strip with Adhesive Back  116 Thick 1 Wide 50 Feet Score-Cut Every 1-12 Length with 392 - 1 x 1-12 Pieces 1 Roll

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 1″ Wide, 50 Feet Score-Cut Every 1-1/2″ Length with 392 – 1″ x 1-1/2″ Pieces (1 Roll)

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 1″ Wide, 50 Feet Score-Cut Every 1-1/2″ Length with 392 – 1″ x 1-1/2″ Pieces (1 Roll) - Score-cut every 1-1/2″ on roll, cut almost completely through so that each piece is removed easily & cleanly tolerance on length is +/- 1/16″. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets minimum recommended length for magnet is 1″. Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Magnet holds on one side only and is rated at up to 1-1/2 pounds perpendicular pull per 1″ x 1-1/2″ piece, or about 40% less pounds pull on vertical surface against sliding force, and less on painted steel. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description made in usa.

 

Master Magnetics ZG05A-ABX Flexible Magnet Strip with Adhesive Back 116 Thick 14 Wide 100 1 Roll

Master Magnetics ZG05A-ABX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 1/4″ Wide, 100′ (1 Roll)

Master Magnetics ZG05A-ABX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 1/4″ Wide, 100′ (1 Roll) - Magnet withstands temperatures from 0-150 degrees fahrenheit made in usa. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets minimum recommended length for magnet is 4-3/8″. Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Magnet holds on one side only and is rated at up to 2-3/4 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.

 

Write-On MX-200 Magnetic Label Rolls 2 x 50 White

Write-On MX-200 Magnetic Label Rolls, 2″ x 50″, White

Write-On MX-200 Magnetic Label Rolls, 2″ x 50″, White - Write on top coat, cut to length, and apply aigner write-on magnetic label rolls to any metal surface. Clear-coated vinyl surface with 1/16″ thick magnetic backing. Color white.

 

Tape Logic TLLH128 Warehouse Labels Magnetic Rolls 2 x 50 Orange

Tape Logic TLLH128 Warehouse Labels, “Magnetic Rolls, 2″ x 50′, Orange

Tape Logic TLLH128 Warehouse Labels, “Magnetic Rolls, 2″ x 50′, Orange - Cut roll to length with scissors. Reusable labels can be relocated when inventory is moved. Mark with wet or dry erase markers. Perfect for labels, signs, job tickets and so much more. Write-on/wipe-off feature makes moving inventory quick and easy.

 

Master Magnetics ZG60A-A10BX Flexible Magnet Strip with Adhesive Back 116 Thick 1-12 Wide 10 1 Roll

Master Magnetics ZG60A-A10BX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 1-1/2″ Wide, 10′ (1 Roll)

Master Magnetics ZG60A-A10BX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 1-1/2″ Wide, 10′ (1 Roll) - Magnet withstands temperatures from 0-150 degrees fahrenheit made in usa. Magnet holds on one side only and is rated at up to 19-1/2 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets. Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description.

 

Roll-N-Cut Flexible Magnetic Tape Refill - 116 thick x 12 wide x 15 feet 1 roll

Roll-N-Cut Flexible Magnetic Tape Refill – 1/16″ thick x 1/2″ wide x 15 feet. (1 roll)

Roll-N-Cut Flexible Magnetic Tape Refill – 1/16″ thick x 1/2″ wide x 15 feet. (1 roll) - Magnet holds up to 6 pounds per linear foot on contact with flat, smooth ferrous steel, without layer of material between magnet and steel minimum recommended length for magnet is 2″. Adhesive covered by peel-off liner is on non-magnetic side adhesive is pressure-activated, permanent, acrylic type with initial tack and minimum of 24 hour cure time requirement. Magnet designed to hold on one side only directly to flat steel surface multiple poles are evenly spread across its surface to prevent sliding it does not hold well to other magnets. Magnet withstands temperatures from 0-150 degrees fahrenheit. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description.

 

Master Magnetics ZG10A-ASC4BX Flexible Magnet Strip with Adhesive Back 116 Thick 12 Wide 100 Feet Score-Cut Every 4 Length with 297 - 12 x 4 Pieces 1 Roll

Master Magnetics ZG10A-ASC4BX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 1/2″ Wide, 100 Feet Score-Cut Every 4″ Length with 297 – 1/2″ x 4″ Pieces (1 Roll)

Master Magnetics ZG10A-ASC4BX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 1/2″ Wide, 100 Feet Score-Cut Every 4″ Length with 297 – 1/2″ x 4″ Pieces (1 Roll) - Score-cut every 4″ on roll, cut almost completely through so that each piece is removed easily & cleanly tolerance on length is +/- 1/16″. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets minimum recommended length for magnet is 2″. Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description made in usa. Magnet holds on one side only and is rated at up to 2 pounds perpendicular pull per 1/2″ x 4″ piece, or about 40% less pounds pull on vertical surface against sliding force, and less on painted steel.

 

Tape Logic TLLH121 Warehouse Labels Magnetic Rolls 1 x 50 Yellow

Tape Logic TLLH121 Warehouse Labels, “Magnetic Rolls, 1″ x 50′, Yellow

Tape Logic TLLH121 Warehouse Labels, “Magnetic Rolls, 1″ x 50′, Yellow - Cut roll to length with scissors. Reusable labels can be relocated when inventory is moved. Mark with wet or dry erase markers. Write-on/wipe-off feature makes moving inventory quick and easy. Perfect for labels, signs, job tickets and so much more.

 

Tape Logic TLLH124 Warehouse Labels Magnetic Rolls 3 x 50 White

Tape Logic TLLH124 Warehouse Labels, “Magnetic Rolls, 3″ x 50′, White

Tape Logic TLLH124 Warehouse Labels, “Magnetic Rolls, 3″ x 50′, White - Write-on/wipe-off feature makes moving inventory quick and easy. Reusable labels can be relocated when inventory is moved. Cut roll to length with scissors. Mark with wet or dry erase markers. Perfect for labels, signs, job tickets and so much more.

 

Master Magnetics Flexible Magnet Sheet with White Vinyl Sign Blank - 132 thick x 24 wide x 48 long 1 sheet rolled inside tube

Master Magnetics Flexible Magnet Sheet with White Vinyl, Sign Blank – 1/32″ thick x 24″ wide x 48″ long (1 sheet rolled inside tube)

Master Magnetics Flexible Magnet Sheet with White Vinyl, Sign Blank – 1/32″ thick x 24″ wide x 48″ long (1 sheet rolled inside tube) - The non-magnetic side is laminated with a white vinyl with satin finish, and is printable with screen print inks, lettering enamels, self-adhesive backed vinyl letters and numbers and wet-erase type markers. If magnet is applied to smooth, flat, ferrous steel without holes and without material or paper between pounds of pull are up to 85 per square foot, less for smaller pieces. This product is not designed for magnets to stick to rather it holds itself directly to a flat, smooth steel surfaces like fridge and auto. Can be cut with heavy scissors, knife, or die. 1/32″ thick x 24″ wide x 48″ long flexible magnetic sheet is magnetic on one side only with a white vinyl on the reverse and is used as a sign blank for creating vehicle signs or large magnetic signs.

 

Master Magnetics Flexible Magnet Strip with Adhesive Back  116 Thick 3 Wide 10 feet 1 Roll

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 3″ Wide, 10 feet (1 Roll)

Master Magnetics Flexible Magnet Strip with Adhesive Back , 1/16″ Thick, 3″ Wide, 10 feet (1 Roll) - Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Magnet withstands temperatures from 0-150 degrees fahrenheit made in usa. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description. Magnet holds on one side only and is rated at up to 39 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets.

 

Master Magnetics ZG38A-ABX Flexible Magnet Strip with Adhesive Back 116 Thick 38 Wide 100 1 Roll

Master Magnetics ZG38A-ABX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 3/8″ Wide, 100′ (1 Roll)

Master Magnetics ZG38A-ABX Flexible Magnet Strip with Adhesive Back, 1/16″ Thick, 3/8″ Wide, 100′ (1 Roll) - Indoor/outdoor adhesive is pressure-activated, permanent, acrylic type, covered by peel-off liner with initial tack and minimum of 24 hour cure time requirement. Adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, glass, and rigid plastics for best results see full product description. Magnet withstands temperatures from 0-150 degrees fahrenheit made in usa. Magnet holds on one side only and is rated at up to 4 pounds perpendicular pull per linear foot, about 40% less pounds pull on vertical surface against sliding force, and less on painted steel. Magnet designed to hold on contact with flat, smooth ferrous steel, without a layer of material between magnet and steel not to other magnets minimum recommended length for magnet is 3″.

 

Ship Now Supply SNLH139 Warehouse Labels Magnetic Rolls 1 x 100 1 Roll 1 width Yellow

Ship Now Supply SNLH139 Warehouse Labels, Magnetic Rolls, 1″ x 100′, (1 Roll), 1″ width, Yellow

Ship Now Supply SNLH139 Warehouse Labels, Magnetic Rolls, 1″ x 100′, (1 Roll), 1″ width, Yellow - Reusable labels can be relocated when inventory is moved. Perfect for labels, signs, job tickets and so much more. Cut roll to length with scissors. Write-on/wipe-off feature makes moving inventory quick and easy. Mark with wet or dry erase markers.

 

Ship Now Supply SNLH159 Warehouse Labels Magnetic Rolls 4 x 100 1 Roll 4 width White

Ship Now Supply SNLH159 Warehouse Labels, Magnetic Rolls, 4″ x 100′, (1 Roll), 4″ width, White

Ship Now Supply SNLH159 Warehouse Labels, Magnetic Rolls, 4″ x 100′, (1 Roll), 4″ width, White - Cut roll to length with scissors. Reusable labels can be relocated when inventory is moved. Mark with wet or dry erase markers. Write-on/wipe-off feature makes moving inventory quick and easy. Perfect for labels, signs, job tickets and so much more.