16 Greatest 2 Flute Ball Nose End Mills

 

516 Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

5/16″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

5/16″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill - Manufactured in poland. Great price for a good tool. Economical double ended tool. 2 flute ball nose. M-42 cobalt.

 

Drillco 316x38 2-Flute Ball Nose End Mills High Speed Steel Bright Regular Length Single End 3 Pack

Drillco, 3/16×3/8, 2-Flute Ball Nose End Mills, High Speed Steel, Bright, Regular Length, Single End (3 Pack)

Drillco, 3/16×3/8, 2-Flute Ball Nose End Mills, High Speed Steel, Bright, Regular Length, Single End (3 Pack) - Single end end-mill ball. Shank size3/8. It is used where rounded details must be machined in a part (for example a slot with a rounded bottom) it is also used where sharp machined corners must be avoided ball nose end mills are also widely used for delicate cuts on contoured surfaces of molds and dies. Sizes fractional material high speed steel finish/coating bright cat end millsdc. Length of cut “1/2″”.

 

EnPoint TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ball nose End Mill 532 4mm Shank 075mm Cutter Dia 3mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron

EnPoint TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ball nose End Mill 5/32″ 4mm Shank 0.75mm Cutter Dia 3mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron

EnPoint TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ball nose End Mill 5/32″ 4mm Shank 0.75mm Cutter Dia 3mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron - 2 flutes allows higher feedrates and provides great chip clearance to prevent chips from sticking. With tialn coating increases cutting speed and tool life as well as improving the surface finish used to add a radius between perpendicular faces to reduce stress concentrations. Produced from ultra-fine submicron nano grade solid carbide for maximum tool strength and durablity. It is mainly suitable for milling materials from soft plastics to tough aerospace alloys including aluminum, cast iton, carbon steel, tool steel, stainless steel, mold and alloy steels. Ballnose for producing round bottomed grooves in hardwood and softwood, plywood & composites.

 

14 Carbide 2 Flute Ball Nose End Mill 135-2250 USA

1/4 Carbide 2 Flute Ball Nose End Mill 135-2250 USA

1/4 Carbide 2 Flute Ball Nose End Mill 135-2250 USA - 1/4 shank. Made in the usa. 2 1/2″ overall length. 3/4 length of cut. 2 flute, ball nose.

 

CNBTR Silver Solid Carbide Two Flute Ball Nose End Mills Router Bit Resin Cutters Pack of 5 3175 x 20 x 15mm

CNBTR Silver Solid Carbide Two Flute Ball Nose End Mills Router Bit Resin Cutters Pack of 5 (3.175 x 2.0 x 15mm)

CNBTR Silver Solid Carbide Two Flute Ball Nose End Mills Router Bit Resin Cutters Pack of 5 (3.175 x 2.0 x 15mm) - 175mm blade diameter 2. 3. The bladed product is not use for people under 18 years. 5mm blade length 15mm dimension39 x 3. Please offer it to us when you need assistance. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed£® 2. 175mm/1. The item is only use for industrial cutting/engraving, not hazardous article package include 5 x two flute carbide ball nose end mill cutter the unique mpn label on each inner package, which confirm it passed the quality inspection and it is genuine item sold from our shop. 13″(l x dia) weight24g safety instructions 1. Specification materialsolid carbide colorsilver brand namecnbtr shank diameter 3. 54 x 0.

 

18 Carbide 2 Flute Ball Nose End Mill 135-2125 USA

1/8 Carbide 2 Flute Ball Nose End Mill 135-2125 USA

1/8 Carbide 2 Flute Ball Nose End Mill 135-2125 USA - 1/2 length of cut. 1 1/2″ overall length. 1/8 shank. Made in the usa. 2 flute, ball nose.

 

SHINA 5Pcs 3175mm 18 Shank 2 Flute Ball-nose End Mill Tungsten Carbide Spiral Cutter CNC Engraving Router Bits 2Qx3104

SHINA 5Pcs 3.175mm 1/8″ Shank 2 Flute Ball-nose End Mill Tungsten Carbide Spiral Cutter CNC Engraving Router Bits (2Qx3.1.04)

SHINA 5Pcs 3.175mm 1/8″ Shank 2 Flute Ball-nose End Mill Tungsten Carbide Spiral Cutter CNC Engraving Router Bits (2Qx3.1.04) - Application:cutting,milling bottom,2d carving,embossment processing ,etc. Or it may result in tool’s edge fracture and cause accident. -Using a little oil on the surface of the tool can prevent rust. 5. 1/8″);cutting diameter1. Package includes 5pcs. 04x5pc shank diameter3. 2. Material:superior tungsten carbide. 3. Clean resin,wood chips and other stains on the wood, and use standard industial solvent to clean the tools after use. Each grinding process requires specialized equipment and proffesional grdinding technique. 0mm;cutting length:4mm; overall length40mm. Clean all stains on the shank of the tools,in order to avoid slippage when use. 175mm(approxi. -Don’t change the shape of the tool arbitrarily with grinding tools. 1. Dimension: 2qx3. 4. 1. Tool maintenance: -keep tools clean.

 

Drillco 18x38 2-Flute Ball Nose End Mills High Speed Steel Bright Regular Length Single End 3 Pack

Drillco, 1/8×3/8, 2-Flute Ball Nose End Mills, High Speed Steel, Bright, Regular Length, Single End (3 Pack)

Drillco, 1/8×3/8, 2-Flute Ball Nose End Mills, High Speed Steel, Bright, Regular Length, Single End (3 Pack) - Shank size3/8. Sizes fractional material high speed steel finish/coating bright cat end millsdc. It is used where rounded details must be machined in a part (for example a slot with a rounded bottom) it is also used where sharp machined corners must be avoided ball nose end mills are also widely used for delicate cuts on contoured surfaces of molds and dies. Length of cut “3/8″””. Single end end-mill ball.

 

American Carbide 131668 116 Single End 2 Flute Ball Nose End Mill Uncoated

American Carbide 131668 1/16 Single End 2 Flute Ball Nose End Mill Uncoated

American Carbide 131668 1/16 Single End 2 Flute Ball Nose End Mill Uncoated - 1/4″ length of cut. 1-1/2″ overall length. 2 flute. 1/8″ shank diameter. 1/16″ cutter diameter.

 

HOZLY 18 Shank 2 Flute Ball Nose End Mill Cutter CNC Bit 3175X15mm Pack Of 10

HOZLY 1/8″ Shank 2 Flute Ball Nose End Mill Cutter CNC Bit 3.175X15mm Pack Of 10

HOZLY 1/8″ Shank 2 Flute Ball Nose End Mill Cutter CNC Bit 3.175X15mm Pack Of 10 - Specification wear-resistant and with special ball nose end design material solid carbide cutting diameter 3. 175mm cutting edge length (flute length)15mm total length 38mm number of flutes 2 a wide range of materials can be engraved, including copper, aluminum ,abs, acrylic, pvc, nylon, resin, majority of plastics weight 50g package include 10 x ball nose end mills. 175mm shank diameter 3.

 

HOZLY 3175X15X6mm 2 Flute Ball Nose End Mill Cutters Pack Of 10

HOZLY 3.175X1.5X6mm 2 Flute Ball Nose End Mill Cutters Pack Of 10

HOZLY 3.175X1.5X6mm 2 Flute Ball Nose End Mill Cutters Pack Of 10 - Specification wear-resistant and with special ball nose end design material solid carbide cutting diameter 1. 175mm cutting edge length (flute length)6mm total length 38mm number of flutes 2 a wide range of materials can be engraved, including copper, aluminum ,abs, acrylic, pvc, nylon, resin, majority of plastics weight 50g package include 10 x ball nose end mills. 5mm shank diameter 3.

 

14 Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

1/4″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

1/4″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill - Manufactured in poland. M-42 cobalt. 2 flute ball nose. Great price for a good tool. Economical double ended tool.

 

KYOCERA 1635-0312047 Series 1635 Stub Length Ball Nose End Mill Carbide Uncoated 30 Degree Angle 2 Flute 132 Cutting Diameter 18 Shank Diameter 0047 Cutting Length 1-12 Length

KYOCERA 1635-0312.047 Series 1635 Stub Length Ball Nose End Mill, Carbide, Uncoated, 30 Degree Angle, 2 Flute, 1/32″ Cutting Diameter, 1/8″ Shank Diameter, 0.047″ Cutting Length, 1-1/2″ Length

KYOCERA 1635-0312.047 Series 1635 Stub Length Ball Nose End Mill, Carbide, Uncoated, 30 Degree Angle, 2 Flute, 1/32″ Cutting Diameter, 1/8″ Shank Diameter, 0.047″ Cutting Length, 1-1/2″ Length - 00025 inch (. 0015 inch (38um) to 0. We offer high-volume cnc grinding consistency in diameters from 0. 6um) and superior surface finishes. 264 inch (6. 70mm), tolerances as tight as 0. Kyocera has designed and manufactured tight tolerance carbide cutting tools and miniature parts for a broad range of markets including the electronics, industrial, medical and aerospace industries.

 

12 Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

1/2″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

1/2″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill - Economical double ended tool. M-42 cobalt. Great price for a good tool. Manufactured in poland. 2 flute ball nose.

 

78 Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

7/8″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill

7/8″ Cobalt M-42 Double Ended 2 Flute Ball Nose End Mill - Economical double ended tool. Manufactured in poland. M-42 cobalt. 2 flute ball nose. Great price for a good tool.

 

38 Carbide 2 Flute Ball Nose End Mill 135-2375 USA

3/8 Carbide 2 Flute Ball Nose End Mill 135-2375 USA

3/8 Carbide 2 Flute Ball Nose End Mill 135-2375 USA - 7/8 length of cut. 2 flute, ball nose. 3/8 shank. Made in the usa. 2 1/2″ overall length.