16 Top R245s

 

Sandvik Coromant CBN  Cubic Boron Nitride Milling Insert R245 Style Square CB50 Grade Uncoated R24512T3E0156 Thick 00591 Corner Radius Pack of 1

Sandvik Coromant CBN Cubic Boron Nitride Milling Insert, R245 Style, Square, CB50 Grade, Uncoated, R24512T3E,0.156″ Thick, 0.0591″ Corner Radius (Pack of 1)

Sandvik Coromant CBN Cubic Boron Nitride Milling Insert, R245 Style, Square, CB50 Grade, Uncoated, R24512T3E,0.156″ Thick, 0.0591″ Corner Radius (Pack of 1) - Cb50 grade is a carbide insert with one cubic boron nitride (cbn) tip that provides good wear resistance without limiting shock resistance, gives high edge toughness, and performs well at high cutting temperatures. Maximum cut depth 0098 inches. Available with optional wiper flat (w) for mirror-finishing applications. Used with the sandvik coromant coromill 245 for light-machining face milling and mirror finishing on cast iron in average-to-good machining conditions. Square shape has a strong cutting edge. Screw-style mounting for secure clamping.

 

Sandvik Coromant R245-12 T3 E-W 3330 Carbide Milling Insert 006 mm Corner Radius Positive Chip Breaker Pack of 10

Sandvik Coromant R245-12 T3 E-W 3330 Carbide Milling Insert, 0.06 mm Corner Radius, Positive Chip Breaker (Pack of 10)

Sandvik Coromant R245-12 T3 E-W 3330 Carbide Milling Insert, 0.06 mm Corner Radius, Positive Chip Breaker (Pack of 10) - 250, 10. Coromill 245 light cutting face mills a concept for highest metal removal and mirror finishing diameter 32, 250 mm/1. 000 inch roughing to mirror finishing insert size 12 demanding milling with highest security insert size 18 wiper options for high feed finishing the new gc3330 is a versatile first choice grade that can be used in both dry and wet cast-iron milling. Inveio gives the inserts endurance and wear resistance, with long tool life and predictable wear.

 

PART NO SVK04315 R245-12 T3 K-MM 2030 Sandvik Carbide CoroMill 245 Insert for Milling

PART NO. SVK04315 R245-12 T3 K-MM 2030 Sandvik, Carbide CoroMill 245 Insert for Milling

PART NO. SVK04315 R245-12 T3 K-MM 2030 Sandvik, Carbide CoroMill 245 Insert for Milling - Coromill 245 is a high productivity 45 degree face milling system. Dgi-svk04315 r245-12 t3 k-mm 2030 sandvik, carbide coromill 245 insert for milling. The cutter has a wide application area from roughing to creating mirror finishes. Part no.

 

Sandvik Coromant R245-12 T3 E-ML 1040 PVD Coated Solid Carbide CoroMill 245 Face Indexable Milling Insert 00591 Nose Radius 12 Inscribed Circle Light Chip Breaker 01563 Thick Pack of 10

Sandvik Coromant R245-12 T3 E-ML 1040 PVD Coated Solid Carbide CoroMill 245 Face Indexable Milling Insert, 0.0591″ Nose Radius, 12 Inscribed Circle, Light Chip Breaker, 0.1563″ Thick (Pack of 10)

Sandvik Coromant R245-12 T3 E-ML 1040 PVD Coated Solid Carbide CoroMill 245 Face Indexable Milling Insert, 0.0591″ Nose Radius, 12 Inscribed Circle, Light Chip Breaker, 0.1563″ Thick (Pack of 10) - New design of parallel land improves surface finish on l and m geometries. Operations general face milling. Chamfering (true 45° angle). L/m/h geometries designed for different feed areas-not only edge strength. Smooth and light cutting action. From roughing to finishing, the coromill 245 is the first choice for face milling of most materials with an emphasis on general face milling (light to heavy) of cast iron and steel. Demanding intermittent machining. Face milling to mirror finish. Because of the coromilll 245’s unique design, it has more positive geometries with improved edge strength. Enhanced corner designs to reduce burr formation and frittering of component. Improved effeciency due to design by application. Stronger geometries with lower power consumption. Machining with long overhang. Turnmilling. Long, consistent, and predictable tool life.

 

Sandvik Coromant COROMILL Carbide Milling Insert R245 Style Square GC4240 Grade Multi-Layer Coating R24512T3MPM0156 Thick 0059 Corner Radius Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC4240 Grade, Multi-Layer Coating, R24512T3MPM,0.156″ Thick, 0.059″ Corner Radius (Pack of 10)

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC4240 Grade, Multi-Layer Coating, R24512T3MPM,0.156″ Thick, 0.059″ Corner Radius (Pack of 10) - Maximum cut depth 0256 inches. Choice of light-machining (pl), medium-machining (pm), or heavy-machining (ph) chipbreaker to help prevent chip buildup. Square shape has strong cutting edges. Used with the sandvik coromant coromill 245 for light-, medium-, or heavy-machining face milling on steel in difficult machining conditions. Gc4240 grade is a medium temperature chemical vapor deposition (mtcvd) coating of titanium carbon nitride (ticn), aluminum oxide (al2o3), and titanium nitride (tin) over carbide that provides high shock resistance and offers high security for demanding operations. Screw-style mounting for secure clamping.

 

Sandvik Coromant COROMILL Carbide Milling Insert R245 Style Square GC1020 Grade TiAlN Coating R24512T3MKM0156 Thick 0059 Corner Radius Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC1020 Grade, TiAlN Coating, R24512T3MKM,0.156″ Thick, 0.059″ Corner Radius (Pack of 10)

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC1020 Grade, TiAlN Coating, R24512T3MKM,0.156″ Thick, 0.059″ Corner Radius (Pack of 10) - Used with the sandvik coromant coromill 245 for light-, medium-, or heavy-machining face milling and mirror finishing on gray and nodular cast iron in average-to-good machining conditions. Gc1020 grade is a physical vapor deposition (pvd) coating of titanium aluminum nitride (tialn) over carbide that provides good wear resistance without limiting shock resistance and performs well at moderate to high cutting speeds. Square shape has strong cutting edges. Available with choice of light-machining (kl), medium-machining (km), or heavy-machining (kh) chipbreaker to help prevent chip buildup, or wiper flat (w) for mirror-finishing applications. Maximum cut depth 0256 inches. Screw-style mounting for secure clamping.

 

Sandvik Coromant COROMILL Carbide Milling Insert R245 Style Square H10 Grade Uncoated R24512T3EAL0156 Thick 0098 Corner Radius Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, H10 Grade, Uncoated, R24512T3EAL,0.156″ Thick, 0.098″ Corner Radius (Pack of 10)

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, H10 Grade, Uncoated, R24512T3EAL,0.156″ Thick, 0.098″ Corner Radius (Pack of 10) - Used with the sandvik coromant coromill 245 for light-machining face milling on aluminum in average-to-good machining conditions. Light-machining (al) chipbreaker helps prevent chip buildup. H10 grade is made of uncoated fine-grained carbide that provides good wear resistance without limiting shock resistance and offers high edge sharpness. Screw-style mounting for secure clamping. Maximum cut depth 0256 inches. Square shape has strong cutting edges.

 

Sandvik Coromant Milling Insert R245-12 T3 K-MM S30T - R245-12 T3 K-MM S30T Pack of 10

Sandvik Coromant Milling Insert, R245-12 T3 K-MM S30T – R245-12 T3 K-MM S30T, Pack of 10

Sandvik Coromant Milling Insert, R245-12 T3 K-MM S30T – R245-12 T3 K-MM S30T, Pack of 10 - 059″, chip-breaker mm, grade s30t, insert material carbide, lead angle 45 degrees, insert shape square, inscribed circle 0. Milling insert, steel (p) compatibility no, stainless (m) compatibility yes, cast iron (k) compatibility no, non ferrous (n) compatibility no, super alloy (s) compatibility yes, hardened (h) compatibility no, application medium, style r245, mounting hole dia. 161″, nose radius 0. Of edges 4, coating pvd coated carbide, rake positive, cutting direction right hand, mounting style screw clamp, ansi number r245-12 t3 k-mm s30t, iso number r245-12 t3 k-mm s30t, for use with coromill 245 facemills insert size 12featuressuper alloy (s) compatibility -yeshardened (h) compatibility -noapplication -mediumstyle -r245mounting hole dia. -0. 528″, insert thickness 0. 161″nose radius -0. 059″chip-breaker -mmgrade -s30tinsert material -carbidewarning california residentsthis product can expose you to chemicals including styrene, which is known to the state of california to cause cancer and birth defects or other reproductive harm. California proposition 65 warning. 156″, no.

 

Sandvik Coromant Milling Insert R245-12 T3 M-PH 4240 - R245-12 T3 M-PH 4240

Sandvik Coromant Milling Insert, R245-12 T3 M-PH 4240 – R245-12 T3 M-PH 4240

Sandvik Coromant Milling Insert, R245-12 T3 M-PH 4240 – R245-12 T3 M-PH 4240 - Milling insert, steel (p) compatibility yes, stainless (m) compatibility yes, cast iron (k) compatibility yes, non ferrous (n) compatibility no, super alloy (s) compatibility no, hardened (h) compatibility no, application roughing, style r245, mounting hole dia. -0. 161″chip-breaker -phgrade -4240insert material -carbidelead angle -45 degreeswarning california residentsthis product can expose you to chemicals including styrene, which is known to the state of california to cause cancer and birth defects or other reproductive harm. California proposition 65 warning. 156″, no. Of edges 4, coating mtcvd coated carbide, rake positive, cutting direction right hand, mounting style screw clamp, ansi number r245-12 t3 m-ph 4240, iso number r245-12 t3 m-ph 4240, for use with ra245-127r38-12h,ra245-127r38-12l,ra245-127r38-12m,ra24featuressuper alloy (s) compatibility -nohardened (h) compatibility -noapplication -roughingstyle -r245mounting hole dia. 161″, chip-breaker ph, grade 4240, insert material carbide, lead angle 45 degrees, insert shape square, inscribed circle 0. 528″, insert thickness 0.

 

Sandvik Coromant COROMILL Carbide Milling Insert R245 Style Square GC1010 Grade TiAlN Coating R24512T3MPL0156 Thick 0055 Corner Radius Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC1010 Grade, TiAlN Coating, R24512T3MPL,0.156″ Thick, 0.055″ Corner Radius (Pack of 10)

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC1010 Grade, TiAlN Coating, R24512T3MPL,0.156″ Thick, 0.055″ Corner Radius (Pack of 10) - Screw-style mounting for secure clamping. Used with the sandvik coromant coromill 245 for light- or medium-machining face milling and mirror finishing on hardened steel in average-to-good machining conditions. Maximum cut depth 0256 inches. Choice of light-machining (pl) or medium-machining (pm) chipbreaker to help prevent chip buildup, or wiper flat (w) for mirror-finishing applications. Square shape has strong cutting edges. Gc1010 grade is a physical vapor deposition (pvd) coating of titanium aluminum nitride (tialn) over carbide that provides good wear resistance without limiting shock resistance and performs well at high cutting temperatures.

 

Sandvik Coromant R245-080Q27-12M CoroMill 245 Face Milling Cutter Steel Right Hand 60mm Arbor 80mm Cutting Diameter x 50mm Overall Length 12 Insert Size 6 Close Pitch

Sandvik Coromant R245-080Q27-12M CoroMill 245 Face Milling Cutter, Steel, Right Hand, 60mm Arbor, 80mm Cutting Diameter x 50mm Overall Length, 12 Insert Size, 6 Close Pitch

Sandvik Coromant R245-080Q27-12M CoroMill 245 Face Milling Cutter, Steel, Right Hand, 60mm Arbor, 80mm Cutting Diameter x 50mm Overall Length, 12 Insert Size, 6 Close Pitch - Arbor, cis arbor, cylindrical shank, whistle notch/weldon mounting. The cutter is designed with enhanced corners to reduce burr formation and frittering of the component. Milling cutters for high metal removal and mirror finish. Close tolerance combined with the wiper insert for superior surface finish. Iso application area steel, stainless steel, cast iron, aluminum, heat resistant and titanium alloys, hardened material. 1 mm allow the use of 18 mm wiper inserts together with direct pressed economy inserts. 12 and 18 mm wiper insert options to combine with precision ground milling inserts for mirror finish face milling and turn milling. Light cutting with low power consumption. Easy to use and high productivity. Facilities for setting within 0. Wide range of grades and geometries including ceramic and cbn grades application face milling applications in all types of materials.

 

Sandvik Coromant Milling Insert R245-12 T3 E-ML 2030 - R245-12 T3 E-ML 2030

Sandvik Coromant Milling Insert, R245-12 T3 E-ML 2030 – R245-12 T3 E-ML 2030

Sandvik Coromant Milling Insert, R245-12 T3 E-ML 2030 – R245-12 T3 E-ML 2030 - Of edges 4, coating pvd coated carbide, rake positive, cutting direction right hand, mounting style screw clamp, ansi number r245-12 t3 e-ml 2030, iso number r245-12 t3 e-ml 2030, for use with ra245-127r38-12h,ra245-127r38-12l,ra245-127r38-12m,ra24featuressuper alloy (s) compatibility -yeshardened (h) compatibility -noapplication -finishingstyle -r245mounting hole dia. 161″, chip-breaker ml, grade 2030, insert material carbide, lead angle 45 degrees, insert shape square, inscribed circle 0. Milling insert, steel (p) compatibility yes, stainless (m) compatibility yes, cast iron (k) compatibility no, non ferrous (n) compatibility no, super alloy (s) compatibility yes, hardened (h) compatibility no, application finishing, style r245, mounting hole dia. 161″chip-breaker -mlgrade -2030insert material -carbidelead angle -45 degreeswarning california residentsthis product can expose you to chemicals including styrene, which is known to the state of california to cause cancer and birth defects or other reproductive harm. 528″, insert thickness 0. -0. 156″, no. California proposition 65 warning.

 

Sandvik Coromant COROMILL Carbide Milling Insert R245 Style Square GC3220 Grade Multi-Layer Coating R24512T3EKL0156 Thick 0059 Corner Radius Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC3220 Grade, Multi-Layer Coating, R24512T3EKL,0.156″ Thick, 0.059″ Corner Radius (Pack of 10)

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, GC3220 Grade, Multi-Layer Coating, R24512T3EKL,0.156″ Thick, 0.059″ Corner Radius (Pack of 10) - Used with the sandvik coromant coromill 245 for light-, medium-, or heavy-machining face milling and mirror finishing on gray cast iron in average machining conditions. Square shape has strong cutting edges. Available with choice of light-machining (kl), medium-machining (km), or heavy-machining (kh) chipbreakers to help prevent chip buildup, or wiper flat (w) for mirror-finishing applications. Screw-style mounting for secure clamping. Gc3220 is a medium temperature chemical vapor deposition (mtcvd) coating of titanium carbon nitride (ticn), aluminum oxide (al2o3), and titanium nitride (tin) over carbide that provides a balance of resistance to shock and wear and preserves the life of the tool at moderate to high cutting speeds without coolant. Maximum cut depth 0256 inches.

 

Sandvik Coromant COROMILL Carbide Milling Insert R245 Style Square K15W Grade Multi-Layer Coating R24512T3EKL0156 Thick 0059 Corner Radius Pack of 10

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, K15W Grade, Multi-Layer Coating, R24512T3EKL,0.156″ Thick, 0.059″ Corner Radius (Pack of 10)

Sandvik Coromant COROMILL Carbide Milling Insert, R245 Style, Square, K15W Grade, Multi-Layer Coating, R24512T3EKL,0.156″ Thick, 0.059″ Corner Radius (Pack of 10) - Screw-style mounting for secure clamping. Available with choice of light-machining (kl) chipbreaker to help prevent chip buildup or wiper flat (w) for mirror-finishing applications. Maximum cut depth 0256 inches. K15w grade is a medium temperature chemical vapor deposition (mtcvd) coating of titanium carbon nitride (ticn), aluminum oxide (al2o3), and titanium nitride (tin) over carbide that provides a balance of resistance to shock and wear and performs well at moderate cutting speeds with coolant. Used with the sandvik coromant coromill 245 for light-machining face milling and mirror finishing on gray cast iron in average machining conditions. Square shape has strong cutting edges.

 

GBJ-1 PM4030 R245-12T3M Carbird Inserts 10pcs

GBJ-1 PM4030 R245-12T3M Carbird Inserts 10pcs

GBJ-1 PM4030 R245-12T3M Carbird Inserts 10pcs - Gbj-1 pm1030 r245-12t3m carbird inserts 10pcs. Gbj-1 pm4030 r245-12t3m carbird inserts 10pcs. Used with the sandvik coromant coromill 245 for light-, medium-, or heavy-machining face milling and mirror finishing on gray and nodular cast iron in average-to-good machining conditions. Gbj-1 pm4230 r245-12t3m carbird inserts 10pcs. Square shape has strong cutting edges. Screw-style mounting for secure clamping.

 

PART NO SVK33372 R245-12 T3 E-PL 1030 Sandvik Carbide CoroMill 245 Insert for Milling

PART NO. SVK33372 R245-12 T3 E-PL 1030 Sandvik, Carbide CoroMill 245 Insert for Milling

PART NO. SVK33372 R245-12 T3 E-PL 1030 Sandvik, Carbide CoroMill 245 Insert for Milling - Coromill 245 is a high productivity 45 degree face milling system. Dgi-svk33372 r245-12 t3 e-pl 1030 sandvik, carbide coromill 245 insert for milling. Part no. The cutter has a wide application area from roughing to creating mirror finishes.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.