17 Coolest Jacobs Chucks

 

Jacobs Chuck 0065654 DIN 376 Rigid Tapping Collet System 3 Tap Size M36 with 280mm Tap Shank and 220mm Drive Square

Jacobs Chuck 0065654 DIN 376 Rigid Tapping Collet System 3, Tap Size M36 with 28.0mm Tap Shank and 22.0mm Drive Square

Jacobs Chuck 0065654 DIN 376 Rigid Tapping Collet System 3, Tap Size M36 with 28.0mm Tap Shank and 22.0mm Drive Square - Quick change style allows taps to be changed quickly. Rigidity reliable and easy to use for general tapping applications. Torque structure limits prevent breakage. Tension/compression tap holders available. Overload clutch.

 

Jacobs 6287C 33BA Medium Duty Plain Bearing Keyed Chuck 20 to 130 Millimeter Capacity with 12-Inch 20 Threaded Mount

Jacobs 6287C 33BA Medium Duty Plain Bearing Keyed Chuck 2.0 to 13.0 Millimeter Capacity with 1/2-Inch 20 Threaded Mount

Jacobs 6287C 33BA Medium Duty Plain Bearing Keyed Chuck 2.0 to 13.0 Millimeter Capacity with 1/2-Inch 20 Threaded Mount - One-piece sleeve eliminates crack between driving teeth often found in other designs. Jaws center-ground for absolute straightness and alignment. High accuracy tir 0004-inch maximum at half capacity. Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. Each chuck 100-percent inspected for performance and precision.

 

Mark-10 G1010-1 Jacobs Chuck Pin Vise Grip 0028-025 Dia 10-32 MM Stud with Jam Nuts Included

Mark-10 G1010-1 Jacobs Chuck Pin Vise Grip, 0.028″-0.25″ Dia, 10-32 M/M Stud with Jam Nuts Included

Mark-10 G1010-1 Jacobs Chuck Pin Vise Grip, 0.028″-0.25″ Dia, 10-32 M/M Stud with Jam Nuts Included - Three sizes are available. Jacobs chuck pin vises,0. Compatibile with any force gauges, load cells, and test stands. 250 diameterthese grips are suitable for holding round samples such as wire or tubing. 028-0.

 

Jacobs 3657 K5 Chuck Key

Jacobs (3657) K5 Chuck Key

Jacobs (3657) K5 Chuck Key - Never apply extensions, pliers, wrenches or ‘cheaters’ of any kind to chuck key handles. Do not subject chuck key handles to hammer or other impact blows. Nickel thumb grip styles increase leverage and user comfort. Soft steel handles limit the potential for dangerous fracturing under excessive load. Self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening.

 

Jacobs 30726 DC4595 Drain Chuck Capacity 025-Inch to 12-Inch with 1316-Inch 20 Threaded Mount

Jacobs 30726 DC4595 Drain Chuck Capacity 0.25-Inch to 1/2-Inch with 13/16-Inch 20 Threaded Mount

Jacobs 30726 DC4595 Drain Chuck Capacity 0.25-Inch to 1/2-Inch with 13/16-Inch 20 Threaded Mount - Manufacturer jacobs chuck dc4595 drain chuck made in china dimensions 1 x 1 x 1 weight 0 5.

 

Jacobs Chuck 0080874 HSK 50 A Series ER 16 with 120mm Projection

Jacobs Chuck 0080874 HSK 50 A Series ER 16 with 120mm Projection

Jacobs Chuck 0080874 HSK 50 A Series ER 16 with 120mm Projection - High precision concentricity tir .

 

Jacobs Chuck 3639 0 Series Stainless Steel T-handle Chuck Key

Jacobs Chuck 3639 0 Series Stainless Steel T-handle Chuck Key

Jacobs Chuck 3639 0 Series Stainless Steel T-handle Chuck Key - Never apply extensions, pliers, wrenches or ‘cheaters’ of any kind to chuck key handles. Soft steel handles limit the potential for dangerous fracturing under excessive load. Self-ejecting models with spring-loaded ejectors ensure key disengagement after tightening. Do not subject chuck key handles to hammer or other impact blows. Nickel thumb grip styles increase leverage and user comfort.

 

Jacobs 3664 K30 CHUCK KEY

Jacobs 3664 K30 CHUCK KEY

Jacobs 3664 K30 CHUCK KEY - Commercial brand jacobs. Knobs, handles, workholding & machine tool accessories. Made in china.

 

Jacobs Chuck 33418D 14N Replacement Part Chuck Service Kit

Jacobs Chuck 33418D #14N Replacement Part Chuck Service Kit

Jacobs Chuck 33418D #14N Replacement Part Chuck Service Kit - 14n. Jacobs chuck replacement kit for the older models which do not incorporate the service kit marking on the chuck nose. Kit includes jaws, nut, caged bearing and thrust washer. For model no.

 

Jacobs Chuck Key

Jacobs Chuck Key

Jacobs Chuck Key - Country of manufacture china. Manufacturer jacobs. Knobs, handles, work holding & machine tool accessories.

 

Jacobs Chuck 0065652 DIN 376 Rigid Tapping Collet System 3 Tap Size M33 with 250mm Tap Shank and 200mm Drive Square

Jacobs Chuck 0065652 DIN 376 Rigid Tapping Collet System 3, Tap Size M33 with 25.0mm Tap Shank and 20.0mm Drive Square

Jacobs Chuck 0065652 DIN 376 Rigid Tapping Collet System 3, Tap Size M33 with 25.0mm Tap Shank and 20.0mm Drive Square - Quick change style allows taps to be changed quickly. Rigidity reliable and easy to use for general tapping applications. Tension/compression tap holders available. Torque structure limits prevent breakage. Overload clutch.

 

Jacobs Chuck 9684 High Precision Model Taper Mounted Industrial Keyless Chuck 6JT Mount 3364 Maximum Capacity 3-2932 Closed Length

Jacobs Chuck 9684 High Precision Model Taper Mounted Industrial Keyless Chuck, 6JT Mount, 33/64″ Maximum Capacity, 3-29/32″ Closed Length

Jacobs Chuck 9684 High Precision Model Taper Mounted Industrial Keyless Chuck, 6JT Mount, 33/64″ Maximum Capacity, 3-29/32″ Closed Length - 3-29/32-inches closed length. Self-tightening feature automatically increases gripping force proportional to increased torque to prevent tool shank slippage. All components exposed to wear are completely hardened to maintain accuracy and extend chuck life. High precision model taper mounted industrial keyless chuck. Precision tested and certified to 00016-inches tir max at half capacity.

 

Jacobs Chuck 31416 High Torque and Precision Keyless Drill Chuck with Integrated Shank R8 Mount 0630 Maximum Capacity 2-18 Diameter x 3-2532 Closed Length

Jacobs Chuck 31416 High Torque and Precision Keyless Drill Chuck with Integrated Shank, R8 Mount, 0.630″ Maximum Capacity, 2-1/8″ Diameter x 3-25/32″ Closed Length

Jacobs Chuck 31416 High Torque and Precision Keyless Drill Chuck with Integrated Shank, R8 Mount, 0.630″ Maximum Capacity, 2-1/8″ Diameter x 3-25/32″ Closed Length - Right handed operation only. It makes impossible for the arbor and the drill chuck to become accidentally separated, providing a unit of greater rigidity and precision with. 100 percent individually controlled to ensure not to exceed a maximum total integrated run-out of 00016-inch. Self tightening feature automatically increases gripping force proportional to increased torque to prevent tool shank slippage. Arbor is integrated into the internal socket of the drill chuck.

 

Jacobs Chuck 0085437 NMTB 50 ShellFace Mill Tool Holder 32mm Diameter

Jacobs Chuck 0085437 NMTB 50 Shell/Face Mill Tool Holder 32mm Diameter

Jacobs Chuck 0085437 NMTB 50 Shell/Face Mill Tool Holder 32mm Diameter - Through spindle coolant. Balanced to 8,000 rpm. Taper grounded to at3 or better. Easy change/setup and low maintenance. Provides more accurate, rigid tool holder-to-spindle mount tapers.

 

Jacobs Chuck 7364D Straight Shank to Jacobs Taper Arbor 34 x 6JT Mount 4-532 Length

Jacobs Chuck 7364D Straight Shank to Jacobs Taper Arbor, 3/4″ x 6JT Mount, 4-5/32″ Length

Jacobs Chuck 7364D Straight Shank to Jacobs Taper Arbor, 3/4″ x 6JT Mount, 4-5/32″ Length - 3/4″ x 6jt mount. Ideal for use with custom tool and work holder designs and for specialized machining applications. 4-5/32-inches length. Straight shank to jacobs taper arbor. Precision machined and ground to master gages for maximum performance with jacobs drill and tap chucks.

 

Jacobs Chuck 30233 Ball Bearing Taper Mount Chuck 075 Maximum Capacity 3-164 Sleeve Diameter 5-18 Close Length

Jacobs Chuck 30233 Ball Bearing Taper Mount Chuck, 0.75″ Maximum Capacity, 3-1/64″ Sleeve Diameter, 5-1/8″ Close Length

Jacobs Chuck 30233 Ball Bearing Taper Mount Chuck, 0.75″ Maximum Capacity, 3-1/64″ Sleeve Diameter, 5-1/8″ Close Length - Tir 0. Through-hardened sleeve teeth plus hardened nose and keyholes provide outstanding wear resistance. 5-1/8-inches close and 3-61/64-inches open length. Jacobs chuck ball bearing taper mount chuck. One-piece sleeve eliminates crack between driving teeth often found in other designs. 75-inches maximum capacity. 003-inches maximum at half capacity. 04-inches minimum and 0. 4jt mount and k4 key number. 3-1/64-inches sleeve diameter.

 

Arrow Engineering Adjustable Jacobs Chuck

Arrow Engineering, Adjustable Jacobs Chuck

Arrow Engineering, Adjustable Jacobs Chuck - Adjustable jacobs chucks with key accept stirrer shaft diameters from 1. 69. 5mm (nylon-bodied keyless chucks accept stirrer shaft diameters from 1. One end of coupling contains a corrosion-resistant standard metal collar with a stainless steel set screw for fastening to the stirrer shaft. Length of 10. 69. Fluoropolymer resin sleeve securely holds a glass shaft of 10mm (available in three motor shaft diameters. Collar fits into a neoprene rubber sleeve body that accepts a replaceable fluoropolymer resin sleeve with set screw. 2cm (4″) allows for angular and parallel misalignment of glass shaft without danger of breakage. 5mm (flexible couplings provide a safe and convenient alternative for working with glass stirring shafts.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.