17 Most Wanted Panavises

 

PanaVise 353 Plated Steel Jaws pair for 301 303 304 And 381 wscrews #ad

PanaVise 353 Plated Steel Jaws (pair) for 301, 303, 304 And 381 w/screws

PanaVise 353 Plated Steel Jaws (pair) for 301, 303, 304 And 381 w/screws #ad - Panavise’s tilt, turn & rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses all panavise products are covered by a limited lifetime warranty introducing the panavise 353 plated steel jaws (pair) for 301, 303, 304 and 381 w/screws, your heavy-duty alternative for 303 and 304 vise heads. Panavise is a major manufacture of vises and work holding tools. Designed for firmly holding heavier objects in a high heat environment. Limited lifetime warranty. Recommended for high heat, industrial environments.

 

PanaVise 376 Self-Centering Extra Wide Opening Head #ad

PanaVise 376 Self-Centering, Extra Wide Opening Head

PanaVise 376 Self-Centering, Extra Wide Opening Head #ad - Ribbed, neoprene jaw pads are 1875 (476mm) high x 15 (381mm) wide and provide a sure grip reverse the pads and the wide v holds round or elliptical objects. Head length 115 (2921mm) height (shaft to top of jaw pads) 525 (1333mm), weight 19 lbs (09kg). Limited lifetime warranty. By centering weight, this vise heads holds even larger and heavier objects with ease. Compatible with all 300 series bases.

 

Panavise 381 Standard PanaVise With Vacuum Base #ad

Panavise 381 Standard PanaVise With Vacuum Base

Panavise 381 Standard PanaVise With Vacuum Base #ad - Stands 6-1/8″ tall and weighs 2lbs. (1. Vacuum base model combines original model 301 head with a powerful suction pad base that allows rapid set-ups in a variety of locations. Attaches instantly with a flip of the lever to smooth, non-porous surfaces. 3kg). 13oz.

 

PanaVise Model 201 Junior Miniature Vise #ad

PanaVise Model 201 “Junior” Miniature Vise

PanaVise Model 201 “Junior” Miniature Vise #ad - Easy-to-use single knob controls head movement through 3-planes 210 degree tilt, 360 turn & 360 rotation. Fine/coarse adjusting knob controls jaw pressure for delicate work. Continuous heat tolerance to 350 f (177 c), intermittent heat up to 450 f (204 c). Limited lifetime warranty. Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic.

 

PanaVise 319 Model Holder Replacement Knob Set for 315 324 And 333 #ad

PanaVise 319 Model Holder Replacement Knob Set for 315, 324 And 333

PanaVise 319 Model Holder Replacement Knob Set for 315, 324 And 333 #ad - For use with the 315 circuit board holder, 333 rapid assembly circuit board holder and 324 electronic work center. Panavise’s tilt, turn & rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses all panavise products are covered by a limited lifetime warranty introducing the panavise 319 model holder replacement knob set for 315, 324 and 333. Limited lifetime warranty. Panavise is a major manufacture of vises and work holding tools. Missing a knob replacements are available whether accidentally lost, dinged or damaged, replacement knobs return your unit to like new status.

 

PanaVise 318-26 26-Inch Crossbar for 315 324 And 333 #ad

PanaVise 318-26 26-Inch Crossbar for 315, 324 And 333

PanaVise 318-26 26-Inch Crossbar for 315, 324 And 333 #ad - 26-inch (6604mm) crossbar. For use with the 315 circuit board holder, 333 rapid assembly circuit board holder, and 324 electronic work center. When selecting a crossbar, add a minimum of 2-inch (508mm) to your widest circuit board width to accommodate circuit board arms. Limited lifetime warranty.

 

PanaVise 381 Vacuum Base PanaVise #ad

PanaVise 381 Vacuum Base PanaVise

PanaVise 381 Vacuum Base PanaVise #ad - Single knob controls head movement through 3-planes 90 degree tilt, 360 turn & 360 rotation. Jaws are 25-inch (635mm) wide, 05 (126mm) tall and open to 225 (571mm). Limited lifetime warranty. Pad footprint measures 5125 x 425 (1302mm x 108mm) height 6125 (1556mm), weight 28 lbs (13kg). Base accepts all 300 series heads and any 5/8-inch (159mm) diameter shaft.

 

PanaVise 239 Speed Control Handle for 201 203 207 and 209 #ad

PanaVise 239 Speed Control Handle for 201, 203, 207 and 209

PanaVise 239 Speed Control Handle for 201, 203, 207 and 209 #ad - Accessory for 201, 203, 207 and 209. Snaps on existing knob no tools needed for assembly. Ideal for working with gloves or quickly opening and closing vise jaws. Fits models 201, 207 and 209 pv jr vise combinations and the 203 pv jr head. Easy on, easy off handle for faster jaw movement & fine tuning control.

 

PanaVise 308 Weighted Base Mount #ad

PanaVise 308 Weighted Base Mount

PanaVise 308 Weighted Base Mount #ad - Panavise is a major manufacture of vises and work holding tools. 6mm x 190. (2. 2mm), weight 5. Vise and 300 & 305 bases. Height (with pads) 1. 1875 (30. Two 1/4-20 holes are drilled and tapped on the side extensions for mounting accessories such as the 371 solder station. 875-inch deep x 7. 3kg). Includes four non-marring, anti-skid pads. 0 lbs. Panavise’s tilt, turn & rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses all panavise products are covered by a limited lifetime warranty introducing the panavise 308 weighted base mount, adds portability and stability to your vise this husky, cast iron base mount features two wings for extra stability. Limited lifetime warranty. Compatible with the 201 pv jr. Overall dimensions 6. 5 wide (174. 5mm).

 

PanaVise 324 Electronic Work Center #ad

PanaVise 324 Electronic Work Center

PanaVise 324 Electronic Work Center #ad - Limited lifetime warranty. Circuit board holder tilts 90 degrees, turns 360 & rotates 360. Single control knob and exclusive split-ball locks the circuit board holder firmly into place. Includes a 315 circuit board holder, a 300 standard base, a 312 parts tray base mount, and a 371 solder station. Height 135-inch (3429mm) weight 45 lbs (2kg).

 

PanaVise 204 Neoprene Pads #ad

PanaVise 204 Neoprene Pads

PanaVise 204 Neoprene Pads #ad - Fits model 201 and 209 pv jr vise combinations and the 203 pv jr head. Firmly holds your projects while protecting finished surfaces. Neoprene pads slip over the existing jaws and are soft and gentle, with plenty of holding power. Limited lifetime warranty.

 

PanaVise 400 Heavy Duty Base #ad

PanaVise 400 Heavy Duty Base

PanaVise 400 Heavy Duty Base #ad - Square base [4125 x 4125 (1048mm x 1048mm)] has four 03125 (79mm) mounting holes (mounting screws not included) height 325 (825mm), weight 15 lbs (07kg). Single knob controls head movement through 3-planes 90 degree tilt, 360 turn & 360 rotation. Limited lifetime warranty. Accepts any 1 (254mm) diameter shaft to a depth of 17 (432mm). Recommended for use with the 437 heavy duty fixturing head.

 

QuadHands Flex - Helping Hands Soldering Tool Add On - Add Four Flexible Metal Arms to Your Favorite PanaVise #ad

QuadHands Flex – Helping Hands Soldering Tool Add On – Add Four Flexible Metal Arms to Your Favorite PanaVise

QuadHands Flex – Helping Hands Soldering Tool Add On – Add Four Flexible Metal Arms to Your Favorite PanaVise #ad - Easy add on to make your panavise system more flexible, all hardware is included. Design is based on the the popular quadhands helping hands third hand tool. Stainless steel alligator clamps can be rotated 360 degrees then “locked” into place with knurled thumb nuts. Four 16″ long all metal flexible gooseneck helping hands are easily positioned where you want them. Built in the usa, 100% satisfaction guaranteed, lifetime warranty.

 

PanaVise 380 Vacuum Base #ad

PanaVise 380 Vacuum Base

PanaVise 380 Vacuum Base #ad - Height 325 (825mm), weight 17 lbs (08kg). Limited lifetime warranty. Pad footprint measures 5125-inch x 425 (1302mm x108mm). Add any of our compatible vise heads to this base and build a versatile, portable work station. Accepts all 300 series heads and any 5/8-inch (159mm) diameter shaft.

 

PanaVise 303 Standard Head #ad

PanaVise 303 Standard Head

PanaVise 303 Standard Head #ad - Nylon jaws offer excellent electrical insulation and gentle holding power, continuous heat tolerance up to 200 f (93 c), intermittent heat to 300 f (149 c). Limited lifetime warranty. Select the 300, 305 or 380 base and create your own versatile vise. Jaws are 25-inch (635mm) wide, 05 (126mm) tall and open to 225 (571mm).

 

PanaVise 437 Heavy Duty Fixturing Head #ad

PanaVise 437 Heavy Duty Fixturing Head

PanaVise 437 Heavy Duty Fixturing Head #ad - Height (bottom of shaft to top of head) 4 (1016mm), weight 086 lbs (04kg). Recommended for use with the 400 heavy duty base. Limited lifetime warranty. Shaft is drilled and tapped 1/4-20 (screw included) for permanently securing to base. Flat head is 3 x 6 (762mm x 1524mm) shaft is 1 (254mm) in diameter and 325 (825mm) long.

 

PanaVise 507 Flat Ribbon Cable Cutter for 506 #ad

PanaVise 507 Flat Ribbon Cable Cutter for 506

PanaVise 507 Flat Ribbon Cable Cutter for 506 #ad - Limited lifetime warranty. More efficient than hand scissors won’t pull inner wires. Accommodates ribbon cable up to 321875-inch (818mm) wide and up to 14-gauge thick. Accommodates up to 68-pin conductor cable. Easy to use and operate, slips into the 502 panapress with the 506 retrofit kit.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.