17 Most Wanted Swivel Clamps

 

Adjustable Swivel Clamp-34 X 34

Adjustable Swivel Clamp-3/4 X 3/4″

Adjustable Swivel Clamp-3/4 X 3/4″ - Fine adjustment universal swivel clamp. Easy to set up gages into required position. Holds 3/8″, 6mm, 8mm and dovetail powerful 176 lbs on/off magnetic base. Bottom arm length 526″ top arm length 524″. Has unique central locking mechanism with spring loaded bearing for easy set-up.

 

Global Truss 2in Pro Swivel Mounted Clamp 4 Pack

Global Truss 2in Pro Swivel Mounted Clamp 4 Pack

Global Truss 2in Pro Swivel Mounted Clamp 4 Pack - Easily locks and unlocks, easy to operate, even with gloves on. Swivel jaw pads pivot for best fit and grip of angles, edges or uneven surfaces. 11-inch locking c clamps constructed of high-grade heat-treated alloy steel. Ideal for all types of manly hobbies such as mechanics, welding, woodwork and more with its quick release locking mechanism. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use.

 

Swivel Clamp Holder - Jumbo - Eisco Labs

Swivel Clamp Holder – Jumbo – Eisco Labs

Swivel Clamp Holder – Jumbo – Eisco Labs - Accommodates rods up to 21mm in diameter. 7″ in length from one thumb screw to the other. Swivel clamp holder allows tilting of clamps at any angle. 25″ in width.

 

MALAB 3 Finger Dual Adjustment Lab Swivel Clamp PVC Coated Prong Jaws

MALAB 3 Finger Dual Adjustment Lab Swivel Clamp PVC Coated Prong Jaws

MALAB 3 Finger Dual Adjustment Lab Swivel Clamp PVC Coated Prong Jaws - Condition 100% brand new and high quality material alloy diameter this clamp can hold 0-70mmrod length150mmrod diameter 15mmweight 300 g package content 1 x three finger dual adjustment lab swivel clampuse to hold test tube, flask, condenser tube and so on. Skidproof.

 

Global Truss Jr Swivel Clamp Aluminum Finish

Global Truss Jr Swivel Clamp, Aluminum Finish

Global Truss Jr Swivel Clamp, Aluminum Finish - 1-1/4 inch. 2-1/4 inch. Medium duty dual swivel clamp for 35mm tubing compatible with f23-f24 truss minimum tubing diameter 32mm maximum tubing diameter 35mm max load capacity 75 kgs, 165 lbs. 2-3/8 inch. Base rotates 360 degrees.

 

Buthneil 11-Inch Locking C-Clamp with Swivel Pads

Buthneil 11-Inch Locking C-Clamp with Swivel Pads

Buthneil 11-Inch Locking C-Clamp with Swivel Pads - 11-inch locking c clamps constructed of high-grade heat-treated alloy steel. Easily locks and unlocks, easy to operate, even with gloves on. Ideal for all types of manly hobbies such as mechanics, welding, woodwork and more with its quick release locking mechanism. Adjust pressure and work fit with turn screw that stays adjusted for repetitive use. Swivel jaw pads pivot for best fit and grip of angles, edges or uneven surfaces.

 

Adjustable Swivel Clamp-12 X 12

Adjustable Swivel Clamp-1/2 X 1/2″

Adjustable Swivel Clamp-1/2 X 1/2″ - Any combination of 17 standard size holding diameters heavy-duty from 3/8″ x 3/8″ to 1″ x 1″ diameter. Provides positive, rigid holding power. Flexbar adjustable swivel clamps anti-vibration lock. Medium duty from 5/32″ x 5/16″ to 1/2″ x 3/8″ diameter.

 

Noga Fine Adjustment Swivel Clamp

Noga Fine Adjustment Swivel Clamp

Noga Fine Adjustment Swivel Clamp - For noga models #nf61003, #dg61003, #mg61003, and #ma61003.

 

GEM Adjustable Swivel Clamps - Model S-6 HOLE SIZE 516 x 38

GEM Adjustable Swivel Clamps – Model: S-6 HOLE SIZE: 5/16 x 3/8″

GEM Adjustable Swivel Clamps – Model: S-6 HOLE SIZE: 5/16 x 3/8″ - Please read full description carefully before ordering. Constructed of 6061 t-6 aluminum. 1/4-20 thru hole. You will need (1) #555140 for every clamping motor mount ordered.

 

Wet Sounds TC3-S 6 pin LED lighting connectors for swivel clamps pair

Wet Sounds TC3-S 6 pin LED lighting connectors for swivel clamps (pair)

Wet Sounds TC3-S 6 pin LED lighting connectors for swivel clamps (pair) - Nickel-plated zinc construction. Q-clamp post holders grip rods up to 075″ (19 cm) and are adjustable for forward or reverse-facing adjustment screws. Tc3-s 6 pin led lighting connector.

 

MALAB 3 Finger Lab Swivel Clamp PVC Coated Prong Jaws 360° Adjustment

MALAB 3 Finger Lab Swivel Clamp PVC Coated Prong Jaws 360° Adjustment

MALAB 3 Finger Lab Swivel Clamp PVC Coated Prong Jaws 360° Adjustment - Skidproof. Condition 100% brand new and high quality material alloy diameter this clamp can hold 0-70mmrod length150mmrod diameter 15mmweight 250 g package content 1 x three finger lab swivel clampuse to hold test tube, flask, condenser tube and so on.

 

Adjustable Swivel Clamp-38 X 38

Adjustable Swivel Clamp-3/8 X 3/8″

Adjustable Swivel Clamp-3/8 X 3/8″ - Any combination of 17 standard size holding diameters heavy-duty from 3/8″ x 3/8″ to 1″ x 1″ diameter. Flexbar adjustable swivel clamps anti-vibration lock. Provides positive, rigid holding power. Medium duty from 5/32″ x 5/16″ to 1/2″ x 3/8″ diameter.

 

BIPEE Lab Swivel Type Clamp Condenser 3 Finger with Boss Head Up to 90mm

BIPEE Lab Swivel Type Clamp Condenser 3 Finger, with Boss Head, Up to 90mm

BIPEE Lab Swivel Type Clamp Condenser 3 Finger, with Boss Head, Up to 90mm - Rubber coated 3 prong lab clamp chrome plated covered jaws for protection and grip 360 degree adjust ,grip 5-90mm. 21cm overlength with boss head.

 

Swivel Clamp Motor Mount

Swivel Clamp Motor Mount

Swivel Clamp Motor Mount - When attached to the 555140, these motor mounts become extremely versatile and can easily attach to other actobotics components.   By loosening the ¼-20 screw, the mount can be rotated to adjust the position of the motor.   The 555140 comes with a ¼-20 socket head screw and a lock-nut to attach a swivel motor mount.

 

2pcs 18 Locking C Clamp With Swivel Pad Welding Holding Tools

2pcs 18″ Locking C Clamp With Swivel Pad Welding Holding Tools

2pcs 18″ Locking C Clamp With Swivel Pad Welding Holding Tools - Clamps with swivel pad. Tools 2 new. Clamp with swivel. 2pcs 18 locking c”. Pad welding holding.

 

Laboy Alloy Three prong single adgust swivel clamp For object 0-70mm

Laboy Alloy Three prong single adgust swivel clamp For object 0-70mm.

Laboy Alloy Three prong single adgust swivel clamp For object 0-70mm. - Single adjustable. Three finger clamp. With bosshead. For object0-70mm. Made of die ¨ccast alloy.

 

GEM Adjustable Swivel Clamps - Model S-3 HOLE SIZE 14 x 38

GEM Adjustable Swivel Clamps – Model: S-3 HOLE SIZE: 1/4 x 3/8″

GEM Adjustable Swivel Clamps – Model: S-3 HOLE SIZE: 1/4 x 3/8″ - Gem adjustable swivel clamps, model s-3 hole size 1/4 x 3/8″.