18 Best Metal Sleeves

 

Röhm 1261209 Drill Chuck Extra-RV60-13 Metal Clamping Capacity 15 mm x 13 mm Radial Locking Sleeve with Trough Hole 12 x 20

Röhm 1261209 Drill Chuck, Extra-RV60-13 Metal, Clamping Capacity 1.5 mm x 13 mm, Radial Locking, Sleeve with Trough Hole, 1/2″ x 20″

Röhm 1261209 Drill Chuck, Extra-RV60-13 Metal, Clamping Capacity 1.5 mm x 13 mm, Radial Locking, Sleeve with Trough Hole, 1/2″ x 20″ - Keyless drill chuck. With free spinning front wheel for work-piece protection on contact. Impact resistant. With radial safety lock. For drills, drivers, and percussion drills with spindle stop and up to max of 80 nm torque and 1000 watt.

 

Vestil VDKR-P107 4 Metal Sleeve for Pipe Safety Railings

Vestil VDKR-P107 4″ Metal Sleeve for Pipe Safety Railings

Vestil VDKR-P107 4″ Metal Sleeve for Pipe Safety Railings - Heavy-duty steel pipe handrailing can be used in multiple application areas. Pre-drilled lag down points saves time with installation. Powder coat safety yellow finish provides durability and protection. Railing protects people or employess from uneven walkways and mezzanine drop off’s.

 

Ushio 1001330 - 1600 Watt Halogen Light Bulb - QIR Heat Lamp - Clear - Metal Sleeve and Wire Leads - 240 Volt

Ushio 1001330 – 1600 Watt Halogen Light Bulb – QIR Heat Lamp – Clear – Metal Sleeve and Wire Leads – 240 Volt

Ushio 1001330 – 1600 Watt Halogen Light Bulb – QIR Heat Lamp – Clear – Metal Sleeve and Wire Leads – 240 Volt - Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection. Internal barrel serrations assure good wire contact and maximum tensile strength. Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping. Barrel of terminal internally beveled to provide quick and easy wire insertion. Dental labs, dentists, hygenists.

 

Panduit DNF18-250FI-L Female Disconnect Nylon Fully Insulated metal sleeve 22 - 18 AWG 250 by 032-Inch Tab Size Funnel Entry Red 50-Pack

Panduit DNF18-250FI-L Female Disconnect, Nylon Fully Insulated, metal sleeve, 22 – 18 AWG, .250 by .032-Inch Tab Size, Funnel Entry, Red (50-Pack)

Panduit DNF18-250FI-L Female Disconnect, Nylon Fully Insulated, metal sleeve, 22 – 18 AWG, .250 by .032-Inch Tab Size, Funnel Entry, Red (50-Pack) - Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost. Fully insulated design provides protection from electrical shorts. Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection. Barrel design with larger outside diameter for use with more common hand tools. Ul flammability ul 94v-2/hb, maximum insulation temperature 221°f (105°c).

 

Panduit DM2-488-C Female Disconnect Non-Insulated Metal Sleeve Metric 15 - 25mm Wire Range 48 x 08mm Tab Size 59mm Width 25mm Height 15mm Length Pack of 100

Panduit DM2-488-C Female Disconnect, Non-Insulated, Metal Sleeve, Metric, 1.5 – 2.5mm Wire Range, 4.8 x 0.8mm Tab Size, 5.9mm Width, 2.5mm Height, 15mm Length (Pack of 100)

Panduit DM2-488-C Female Disconnect, Non-Insulated, Metal Sleeve, Metric, 1.5 – 2.5mm Wire Range, 4.8 x 0.8mm Tab Size, 5.9mm Width, 2.5mm Height, 15mm Length (Pack of 100) - Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping. Internal barrel serrations assure good wire contact and maximum tensile strength. Barrel of terminal internally beveled to provide quick and easy wire insertion. Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost. Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection.

 

uxcell 8mm Punch Dia Metal Sleeve Shield Anchor Expansion Closed Hook Eye Bolt 2PCS

uxcell 8mm Punch Dia Metal Sleeve Shield Anchor Expansion Closed Hook Eye Bolt 2PCS

uxcell 8mm Punch Dia Metal Sleeve Shield Anchor Expansion Closed Hook Eye Bolt 2PCS - Main color bronze tone thread size 6mm x 70mm / 024″ x 28″ (dl). Eye size 20mm x 30mm x 5mm / 08″ x 12″ x 02″ (inner diaodt) washer size 15mm x 1mm / 06″ x 004″ (dt). Product name shield anchor eye bolt material metal weight 74g. Package content 2pcs x shield anchor eye bolt punch diameter 8mm / 03″. Sleeve size 8mm x 45mm / 03″ x 18″ (dl) overall length 110mm / 43″.

 

Ushio BC6451 1001290 - 375W - QIR Heat Lamp - Translucent - Metal Sleeve and Wire Leads - 120V Halogen Light Bulb

Ushio BC6451 1001290 – 375W – QIR Heat Lamp – Translucent – Metal Sleeve and Wire Leads – 120V Halogen Light Bulb

Ushio BC6451 1001290 – 375W – QIR Heat Lamp – Translucent – Metal Sleeve and Wire Leads – 120V Halogen Light Bulb - -. Brand ushio, wattage 375 watt, voltage 120, color temperature 2500 kelvin, length 8. 77 in.

 

Replacement For 1MG25 1000W DIVING LITE METAL SLEEVE Replacement Light Bulb

Replacement For 1M/G25 1000W DIVING LITE METAL SLEEVE Replacement Light Bulb

Replacement For 1M/G25 1000W DIVING LITE METAL SLEEVE Replacement Light Bulb - Volts 115. Watts 1000. Replacement for 1m/g25 1000w diving lite metal sleeve replacement light bulb.

 

uxcell 10mm Punch Dia Metal Sleeve Shield Anchor Expansion Closed Hook Eye Bolt 2PCS

uxcell 10mm Punch Dia Metal Sleeve Shield Anchor Expansion Closed Hook Eye Bolt 2PCS

uxcell 10mm Punch Dia Metal Sleeve Shield Anchor Expansion Closed Hook Eye Bolt 2PCS - Weight 145g package content 2pcs x shield anchor eye bolt. Thread size 8mm x 70mm / 03″ x 28″ (dl) sleeve size 10mm x 50mm / 04″ x 2″ (dl). Product name shield anchor eye bolt material metal. Punch diameter 10mm / 04″ main color bronze tone. Overall length 120mm / 47″ eye size 25mm x 40mm x 7mm / 1″ x 16″ x 028″ (inner diaodt) washer size 22mm x 15mm / 094″ x 006″ (dt).

 

Panduit D14-188-C Female Disconnect Non-Insulated Metal Sleeve 16 - 14 AWG Wire Range 0187 x 0020 Tab Size 023 Width 01 Height 058 Length Pack of 100

Panduit D14-188-C Female Disconnect, Non-Insulated, Metal Sleeve, 16 – 14 AWG Wire Range, 0.187 x 0.020″ Tab Size, 0.23″ Width, 0.1″ Height, 0.58″ Length (Pack of 100)

Panduit D14-188-C Female Disconnect, Non-Insulated, Metal Sleeve, 16 – 14 AWG Wire Range, 0.187 x 0.020″ Tab Size, 0.23″ Width, 0.1″ Height, 0.58″ Length (Pack of 100) - Internal barrel serrations assure good wire contact and maximum tensile strength. Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection. Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping. Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost. Barrel of terminal internally beveled to provide quick and easy wire insertion.

 

Panduit DR14-205-C Right Angle Female Disconnect Non-Insulated Metal Sleeve 16 - 14 AWG Wire Range 02050187 x 0032 Tab Size 025 Width 012 Height 055 Depth 054 Length Pack of 100

Panduit DR14-205-C Right Angle Female Disconnect, Non-Insulated, Metal Sleeve, 16 – 14 AWG Wire Range, 0.205/0.187 x 0.032″ Tab Size, 0.25″ Width, 0.12″ Height, 0.55″ Depth, 0.54″ Length (Pack of 100)

Panduit DR14-205-C Right Angle Female Disconnect, Non-Insulated, Metal Sleeve, 16 – 14 AWG Wire Range, 0.205/0.187 x 0.032″ Tab Size, 0.25″ Width, 0.12″ Height, 0.55″ Depth, 0.54″ Length (Pack of 100) - Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost. Internal barrel serrations assure good wire contact and maximum tensile strength. Right angle design for use in limited space applications. Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping. Barrel of terminal internally beveled to provide quick and easy wire insertion.

 

Ushio BC6467 1001330 - 1600W - QIR Heat Lamp - Clear - Metal Sleeve and Wire Leads - 240V Halogen Light Bulb

Ushio BC6467 1001330 – 1600W – QIR Heat Lamp – Clear – Metal Sleeve and Wire Leads – 240V Halogen Light Bulb

Ushio BC6467 1001330 – 1600W – QIR Heat Lamp – Clear – Metal Sleeve and Wire Leads – 240V Halogen Light Bulb - Brand ushio, wattage 1600 watt, voltage 240, color temperature 2500 kelvin, length 19. 8 in. -.

 

Metal Sleeve Expander 28

Metal Sleeve Expander 28″

Metal Sleeve Expander 28″ - Model wgn-11 weight 100g dimensions 260 (mm) measuring range 100 (degree) indication erroraround 05 (degree) package 1× thermometer. For drills, drivers, and percussion drills with spindle stop and up to max of 80 nm torque and 1000 watt. Impact resistant. With free spinning front wheel for work-piece protection on contact. With radial safety lock.

 

Metal Sleeve Internal Formula Thermometer For Household Industry Use

Metal Sleeve Internal Formula Thermometer For Household Industry Use

Metal Sleeve Internal Formula Thermometer For Household Industry Use - Model wgn-11 weight 100g dimensions 260 (mm) measuring range 100 (degree) indication erroraround 05 (degree) package 1× thermometer. With radial safety lock. For drills, drivers, and percussion drills with spindle stop and up to max of 80 nm torque and 1000 watt. Impact resistant. With free spinning front wheel for work-piece protection on contact.

 

Anderson Metals Brass Compression Tube Fitting Sleeve 38 Tube OD

Anderson Metals Brass Compression Tube Fitting, Sleeve, 3/8″ Tube OD

Anderson Metals Brass Compression Tube Fitting, Sleeve, 3/8″ Tube OD - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing. Operating temperature range of -65 to +250 degrees f. No flaring tool required for assembly.

 

TWIN DOWEL PINS WMETAL sleeve and rubber cap

TWIN DOWEL PINS W/METAL sleeve and rubber cap

TWIN DOWEL PINS W/METAL sleeve and rubber cap - Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection. Dental labs, dentists, hygenists. Barrel of terminal internally beveled to provide quick and easy wire insertion. Internal barrel serrations assure good wire contact and maximum tensile strength. Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping.

 

1000 Watt - Quartz Infrared Heat Light Bulb - Metal Sleeve and Wire Leads - 240 Volt - Halogen Light Bulb - Ushio 1001318

1000 Watt – Quartz Infrared Heat Light Bulb – Metal Sleeve and Wire Leads – 240 Volt – Halogen Light Bulb – Ushio 1001318

1000 Watt – Quartz Infrared Heat Light Bulb – Metal Sleeve and Wire Leads – 240 Volt – Halogen Light Bulb – Ushio 1001318 - 6 inch lead wires. Double ended quartz tube. Halogen lamp. Infrared spectrum.

 

Panduit DM6-63-L Female Disconnect Non-Insulated Metal Sleeve Metric 40 - 60mm Wire Range 63 x 08mm Tab Size 76mm Width 3mm Height 182mm Length Pack of 50

Panduit DM6-63-L Female Disconnect, Non-Insulated, Metal Sleeve, Metric, 4.0 – 6.0mm Wire Range, 6.3 x 0.8mm Tab Size, 7.6mm Width, 3mm Height, 18.2mm Length (Pack of 50)

Panduit DM6-63-L Female Disconnect, Non-Insulated, Metal Sleeve, Metric, 4.0 – 6.0mm Wire Range, 6.3 x 0.8mm Tab Size, 7.6mm Width, 3mm Height, 18.2mm Length (Pack of 50) - Internal barrel serrations assure good wire contact and maximum tensile strength. Sleeved barrel helps to facilitate high mechanical and electrical performance when crimping. Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost. Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection. Barrel of terminal internally beveled to provide quick and easy wire insertion.