19 Best Brass Male Connectors

 

Parker Hannifin 68PMT-4-M16 Brass Male Connector to Metric Adapter Prestomatic Fitting 14 Push-to-Connect Tube x M16x15 Metric Thread

Parker Hannifin 68PMT-4-M16 Brass Male Connector to Metric Adapter Prestomatic Fitting, 1/4″ Push-to-Connect Tube x M16x1.5 Metric Thread

Parker Hannifin 68PMT-4-M16 Brass Male Connector to Metric Adapter Prestomatic Fitting, 1/4″ Push-to-Connect Tube x M16x1.5 Metric Thread - Use in secondary air applications such as pneumatic doors for rail, air seats, shock absorbers and in cab instruments. All brass air brake fitting. Stainless steel tube support assures maximum flow and performance requirements of sae j2494-3. Dot quick connect push-in fittings for repairing truck and trailer air brake lines. For use in air brake systems on semi-trucks, trailers, buses, mobile equipment and farm implements.

 

Parker Hannifin 48F-6-6 Brass Male Connector 45 Degree Flare Fitting 38 Flare Tube x 38 Male Thread

Parker Hannifin 48F-6-6 Brass Male Connector, 45 Degree Flare Fitting, 3/8″ Flare Tube x 3/8″ Male Thread

Parker Hannifin 48F-6-6 Brass Male Connector, 45 Degree Flare Fitting, 3/8″ Flare Tube x 3/8″ Male Thread - The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety. Parker’s 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical. Fittings meet functional requirements of sae j512 and j513. Fittings are available in forgings for refrigeration applications.

 

Parker Hannifin W68PLP-532-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting 532 Push-to-Connect Tube x 14 Male NPTF

Parker Hannifin W68PLP-5/32-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 5/32″ Push-to-Connect Tube x 1/4″ Male NPTF

Parker Hannifin W68PLP-5/32-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 5/32″ Push-to-Connect Tube x 1/4″ Male NPTF - Prestolok plop metal fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. To disassemble, press the release button, hold against the body and pull tubing from the fitting. Simply push the tubing into the fitting until it bottoms. A thread sealant is applied to all male threads eliminating the possibility of system contamination from ptfe tape. Being the world’s leader in push-to-connect fitting technology parker’s prestolok plop nickel plated brass fittings provide a simple way of connecting tubes to a fitting in order to create a fluid distribution network.

 

Parker Hannifin W68PLP-8-6 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting 12 Push-to-Connect Tube x 38 Male NPTF

Parker Hannifin W68PLP-8-6 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 1/2″ Push-to-Connect Tube x 3/8″ Male NPTF

Parker Hannifin W68PLP-8-6 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 1/2″ Push-to-Connect Tube x 3/8″ Male NPTF - A thread sealant is applied to all male threads eliminating the possibility of system contamination from ptfe tape. Simply push the tubing into the fitting until it bottoms. Being the world’s leader in push-to-connect fitting technology parker’s prestolok plop nickel plated brass fittings provide a simple way of connecting tubes to a fitting in order to create a fluid distribution network. Prestolok plop metal fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. To disassemble, press the release button, hold against the body and pull tubing from the fitting.

 

12X14 Brass Male Connector Inverted Flare Tube Fitting - 2-Pack

1/2″X1/4″ Brass Male Connector Inverted Flare Tube Fitting – 2-Pack

1/2″X1/4″ Brass Male Connector Inverted Flare Tube Fitting – 2-Pack - Specifications listed by underwriters laboratories (available on special order). Typical applications hydraulic brake, power steering, fuel lines, transmission cooler lines, lp and natural gas pressure up to 2000 psi depending on tube size sealing method 2-piece flare vibration resistance excellent temperature range -65°f to +250°f material ca360 brass used with copper, steel, brass, aluminum and bundy tubing advantages low cost and reusable. Meets specifications and standards of asa, asme, sae and ms (military standards) characteristics similar in shape to the threaded sleeve but with a thicker nut. Seats and threads are internal and protected. Compact, excellent vibration life. Look for a 45° flared seat inside the body. Brass or steel nut.

 

Dixon 316 x 18 Brass Male Connector Compression Fitting 68C-0302

Dixon 3/16″ x 1/8″ Brass Male Connector Compression Fitting (68C-0302)

Dixon 3/16″ x 1/8″ Brass Male Connector Compression Fitting (68C-0302) - For thermoplastic tubing, see manufacturers recommendation for pressure range. Pressure rating given at 73�f (23�c). 08″working pressure 400 psitemperature range -65�f to +250�fweight (lb) 0. 035applications use with copper, aluminum and thermoplastic tubing. Supplier dixon®material brassthread pipe straightthread size 1/8″ 3/8″-24tube size 3/16″hex 7/16″length 1. Insert tube into the fitting. Warning this product contains a chemical known to the state of california to cause birth defects or other reproductive harm. Be sure the tube is bottomed on the fitting shoulder. The thread end of the nut must face out. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Temperature ranges are given for use with soft metasafety notes not recommended for steel tubing not recommended for applications using gaseous media. Do not use in connection with drinking. Specifications underwriter’s laboratories listed for flammable liquid sae j-512 asa reference sae 060102 bainstallation no flaring, soldering or other preparation of tubing necessary to assemble slide nut, then sleeve onto tubing. Assemble nut tonote temperature and type of tubing used are important factors in working pressure ranges.

 

Legris 3601 04 13 6mm Tube x BSPP Nickel Brass Male Connector

Legris 3601 04 13 6mm Tube x BSPP Nickel Brass Male Connector

Legris 3601 04 13 6mm Tube x BSPP Nickel Brass Male Connector - Price for each item male connector basic fitting shape adapter specific fitting shape connector max. Pressure 435 psi tube size 1/4 inch hex size 13mm temp. Range -4 degrees to 302 degrees f tube fitting material nickel plated brass fitting connection type tube x male bspp pipe size (fittings) m5 basic fitting material metal country of origin (subject to change) spain.

 

Parker Hannifin W68PLP-4-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting 14 Push-to-Connect Tube x 14 Male NPTF

Parker Hannifin W68PLP-4-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 1/4″ Push-to-Connect Tube x 1/4″ Male NPTF

Parker Hannifin W68PLP-4-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 1/4″ Push-to-Connect Tube x 1/4″ Male NPTF - Simply push the tubing into the fitting until it bottoms. Being the world’s leader in push-to-connect fitting technology parker’s prestolok plop nickel plated brass fittings provide a simple way of connecting tubes to a fitting in order to create a fluid distribution network. To disassemble, press the release button, hold against the body and pull tubing from the fitting. Prestolok plop metal fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. A thread sealant is applied to all male threads eliminating the possibility of system contamination from ptfe tape.

 

Parker Hannifin 68PLP-532-0 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting 532 Push-to-Connect Tube x 10-32 UNF

Parker Hannifin 68PLP-5/32-0 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 5/32″ Push-to-Connect Tube x 10-32 UNF

Parker Hannifin 68PLP-5/32-0 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 5/32″ Push-to-Connect Tube x 10-32 UNF - To disassemble, press the release button, hold against the body and pull tubing from the fitting. Prestolok plop metal fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. Being the world’s leader in push-to-connect fitting technology parker’s prestolok plop nickel plated brass fittings provide a simple way of connecting tubes to a fitting in order to create a fluid distribution network. Simply push the tubing into the fitting until it bottoms. A thread sealant is applied to all male threads eliminating the possibility of system contamination from ptfe tape.

 

Parker Hannifin 68CA-8-4 Brass Male Connector Compress-Align Fitting 12 Compression Tube x 14 Male Thread

Parker Hannifin 68CA-8-4 Brass Male Connector Compress-Align Fitting, 1/2″ Compression Tube x 1/4″ Male Thread

Parker Hannifin 68CA-8-4 Brass Male Connector Compress-Align Fitting, 1/2″ Compression Tube x 1/4″ Male Thread - The captive sleeve gives a visible inspection before and after installation and the design of the sleeve aligns to seal even out-of-round tubing. Parker’s economical compress-align fittings are pre-assembled with a captive sleeve which is always oriented correctly for faster assembly. Compress-align bodies are interchangeable with standard compression bodies so inventory is decreased. Compress-align can be used in many areas where flare fittings are used due to the higher pressure rating, meaning no flaring, soldering or tube preparation resulting in faster installation.

 

Parker Hannifin W68PLP-6-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting 38 Push-to-Connect Tube x 14 Male NPTF

Parker Hannifin W68PLP-6-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 3/8″ Push-to-Connect Tube x 1/4″ Male NPTF

Parker Hannifin W68PLP-6-4 Prestolok PLP Nickel Plated Brass Male Connector Push-to-Connect Fitting, 3/8″ Push-to-Connect Tube x 1/4″ Male NPTF - Simply push the tubing into the fitting until it bottoms. Prestolok plop metal fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. To disassemble, press the release button, hold against the body and pull tubing from the fitting. A thread sealant is applied to all male threads eliminating the possibility of system contamination from ptfe tape. Being the world’s leader in push-to-connect fitting technology parker’s prestolok plop nickel plated brass fittings provide a simple way of connecting tubes to a fitting in order to create a fluid distribution network.

 

Gilmour Group 09QCMGT Green Thumb Brass Male Connector

Gilmour Group #09QCMGT Green Thumb Brass Male Connector

Gilmour Group #09QCMGT Green Thumb Brass Male Connector - (6) ea green thumb 09qcmgt brass male hose quick connect / connectors green thumb, brass, male connectors, easily attaches to nozzle or sprinkler for quick connection to hose, heavy duty solid brass construction attaches to green thumb female brass quick connect # 09qcfgt (sold separately).

 

Parker Hannifin 48F-6-2 Brass Male Connector 45 Degree Flare Fitting 38 Flare Tube x 18 Male Thread

Parker Hannifin 48F-6-2 Brass Male Connector, 45 Degree Flare Fitting, 3/8″ Flare Tube x 1/8″ Male Thread

Parker Hannifin 48F-6-2 Brass Male Connector, 45 Degree Flare Fitting, 3/8″ Flare Tube x 1/8″ Male Thread - Parker’s 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out. The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety. Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical. Fittings are available in forgings for refrigeration applications. Fittings meet functional requirements of sae j512 and j513.

 

Green Thumb 09QCMGT Brass Male Hose Quick Connect  Connectors - Quantity 10

Green Thumb 09QCMGT Brass Male Hose Quick Connect / Connectors – Quantity 10

Green Thumb 09QCMGT Brass Male Hose Quick Connect / Connectors – Quantity 10 - (10) ea green thumb 09qcmgt brass male hose quick connect / connectors green thumb, brass, male connectors, easily attaches to nozzle or sprinkler for quick connection to hose, heavy duty solid brass construction attaches to green thumb female brass quick connect # 09qcfgt (sold separately).

 

PARKER 68PLP-4-0 BRASS MALE CONNECTOR ADAPTER 14X10-32IN FITTING

PARKER 68PLP-4-0 BRASS MALE CONNECTOR ADAPTER 1/4X10-32IN FITTING

PARKER 68PLP-4-0 BRASS MALE CONNECTOR ADAPTER 1/4X10-32IN FITTING - Not recommended for continuous-pressure cycling applications. , Tube size 1/4 in. Operating temp. Do not use where accidental separation of tube and fitting could cause injury. , Max. Compact, 1-pc. Male connector, tube fitting material nickel plated brass, fitting connection type tube x unf, pipe size, pipe fitting 10/32 in. Tube supports only required for thin-walled poly tubing. Vacuum applications depend on temperature and tubing type. , Package quantity 10. Prestoloktm nickel-plated brass push-to-connect fittings • max. Range 0 degrees to 200 degrees f, hex size 1/2 in. Pressure 300 psi, temp. 10designed for low-pressure circuits where fast assembly, disassembly, and reassembly are important. , Nickel-plated brass fittings are for use with polyethylene, nylon, or polyurethane tubing. 0° to 200°f (depending on tubing used) pkg. D. Operating pressure 300 psi max. Warning for use only with air, water, oil, and nonreactive gases. Qty. Support ferrules or i.

 

Parker Hannifin 68C-8-8 Brass Male Connector Compression Fitting 12 Compression Tube x 12 Male Thread

Parker Hannifin 68C-8-8 Brass Male Connector Compression Fitting, 1/2″ Compression Tube x 1/2″ Male Thread

Parker Hannifin 68C-8-8 Brass Male Connector Compression Fitting, 1/2″ Compression Tube x 1/2″ Male Thread - Compression fittings are also used in situations where a heat source, in particular a soldering torch, is prohibited. These compression fittings require no flaring, soldering, tube preparation or special tools to operate. Compression fittings are especially useful in installations that may require occasional disassembly or partial removal for maintenance since the fitting can be broken and remade without affecting the integrity of the joint. Parker’s compression fittings are economical and offered in both extrusions and forgings.

 

Parker Hannifin 68PMT-6-4 Brass Male Connector Prestomatic Fitting 38 Push-to-Connect Tube x 14 Male NPTF

Parker Hannifin 68PMT-6-4 Brass Male Connector Prestomatic Fitting, 3/8″ Push-to-Connect Tube x 1/4″ Male NPTF

Parker Hannifin 68PMT-6-4 Brass Male Connector Prestomatic Fitting, 3/8″ Push-to-Connect Tube x 1/4″ Male NPTF - Stainless steel tube support assures maximum flow and performance requirements of sae j2494-3. Dot quick connect push-in fittings for repairing truck and trailer air brake lines. All brass air brake fitting. Use in secondary air applications such as pneumatic doors for rail, air seats, shock absorbers and in cab instruments. For use in air brake systems on semi-trucks, trailers, buses, mobile equipment and farm implements.

 

Parker Hannifin 68C-2-2 Brass Male Connector Compression Fitting 18 Compression Tube x 18 Male Thread

Parker Hannifin 68C-2-2 Brass Male Connector Compression Fitting, 1/8″ Compression Tube x 1/8″ Male Thread

Parker Hannifin 68C-2-2 Brass Male Connector Compression Fitting, 1/8″ Compression Tube x 1/8″ Male Thread - Compression fittings are especially useful in installations that may require occasional disassembly or partial removal for maintenance since the fitting can be broken and remade without affecting the integrity of the joint. Parker’s compression fittings are economical and offered in both extrusions and forgings. Compression fittings are also used in situations where a heat source, in particular a soldering torch, is prohibited. These compression fittings require no flaring, soldering, tube preparation or special tools to operate.

 

Parker Hannifin 48F-6-4 Brass Male Connector 45 Degree Flare Fitting 38 Flare Tube x 14 Male Thread

Parker Hannifin 48F-6-4 Brass Male Connector, 45 Degree Flare Fitting, 3/8″ Flare Tube x 1/4″ Male Thread

Parker Hannifin 48F-6-4 Brass Male Connector, 45 Degree Flare Fitting, 3/8″ Flare Tube x 1/4″ Male Thread - Flare fittings are appropriate alternatives for solder type joints where an open flame is either not desired or impractical. Fittings are available in forgings for refrigeration applications. The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety. Fittings meet functional requirements of sae j512 and j513. Parker’s 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to mechanical pull out.