19 Best Duct Temp Sensors

 

Belimo - Duct Temp Sensor 50x6 V MULT #ad

Belimo – Duct Temp Sensor 50×6 V MULT

Belimo – Duct Temp Sensor 50×6 V MULT #ad - Belimo, duct temp sensor 450×6 a mult. Manufacturer direct. Belimo, duct temp sensor 450×6 v mult. Belimo, duct temp sensor 50×6 v mult. Belimo, duct temp sensor 50×6 a mult.

 

Belimo - Duct Temp Sensor 450x6 A MULT #ad

Belimo – Duct Temp Sensor 450×6 A MULT

Belimo – Duct Temp Sensor 450×6 A MULT #ad - Mamac product te-702-c-7-b. Belimo, duct temp sensor 100×6 a mult. Belimo, duct temp sensor 450×6 a mult. Manufacturer direct. Belimo, duct temp sensor 50×6 a mult.

 

Dwyer Air Duct Temp Sensor TE-DFN-A0648-00 6 Probe 10K Ohm Type III Thermistor 8 Plenum Cable #ad

Dwyer® Air Duct Temp Sensor, TE-DFN-A0648-00, 6″ Probe, 10K Ohm Type III Thermistor, 8′ Plenum Cable

Dwyer® Air Duct Temp Sensor, TE-DFN-A0648-00, 6″ Probe, 10K Ohm Type III Thermistor, 8′ Plenum Cable #ad - For variable air volume applications, the series te can be configured to have 8′ plenum rated cable with flying leads. The series te duct and immersion temperature sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. The 1/4 turn lid comes with a chain to prevent it from being lost during installation. Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. Thermowells are recommended, but not required on the immersion sensors. Flanged duct sensors monitor the supply or return air and provide a thermistor or rtd output to the digital controller. For housing models, multiple knockouts provide easy conduit access to any side of the housing.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Manufacturer direct. Housing material meets ul, 94 v-o polycarbonate plastic. Accuracy ±022°c @ 25°c (±04°f @ 77°f). Mamac product te-702-c-12-a. Cable rating plenum option includes ul listed plenum cable.

 

Belimo - Duct Temp Sensor 100x6 V MULT #ad

Belimo – Duct Temp Sensor 100×6 V MULT

Belimo – Duct Temp Sensor 100×6 V MULT #ad - Mamac product te-702-c-17-b. Mamac product te-702-c-17-c. Belimo, duct temp sensor 100×6 v mult. Manufacturer direct. Mamac product te-702-c-7-b.

 

Johnson Controls Inc TE635GV2 4 FlgMt Duct Temp Sensor #ad

Johnson Controls, Inc. TE635GV2 4″ FlgMt Duct Temp Sensor

Johnson Controls, Inc. TE635GV2 4″ FlgMt Duct Temp Sensor #ad - Manufacturer direct. Mamac product te-702-c-17-b. Mamac product te-702-c-7-b. Mamac product te-702-c-17-c. Cable rating plenum option includes ul listed plenum cable.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Cable rating plenum option includes ul listed plenum cable. Manufacturer direct. Mamac product te-702-c-17-b. Mamac product te-702-c-7-b. Mamac product te-702-c-12-a.

 

Honeywell C7770A1006U D20K Ohm Ntc Duct Temp Sensor 6 Probe 45-99F for Use with W7751 #ad

Honeywell C7770A1006/U D20K Ohm Ntc Duct Temp Sensor, 6″ Probe, 45-99F for Use with W7751

Honeywell C7770A1006/U D20K Ohm Ntc Duct Temp Sensor, 6″ Probe, 45-99F for Use with W7751 #ad - Probe, 45-99f, for use with w7751, honeywell, d20k ohm ntc duct temp sensor, 6 in. Part, d20k ohm ntc duct temp sensor, 6 in. Made in united states. Probe, 45-99f, for use with w7751. Manufactured by honeywell.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Manufacturer direct. Cable rating plenum option includes ul listed plenum cable. Housing material meets ul, 94 v-o polycarbonate plastic. Mamac product te-702-c-12-a. Mamac product te-702-c-17-b.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Mamac product te-702-c-12-a. Accuracy ±022°c @ 25°c (±04°f @ 77°f). Manufacturer direct. Cable rating plenum option includes ul listed plenum cable. Housing material meets ul, 94 v-o polycarbonate plastic.

 

Dwyer Air Duct Temp Sensor TE-DFN-B0444-00 4 Probe 10K Ohm Type II Thermistor #ad

Dwyer® Air Duct Temp Sensor, TE-DFN-B0444-00, 4″ Probe, 10K Ohm Type II Thermistor

Dwyer® Air Duct Temp Sensor, TE-DFN-B0444-00, 4″ Probe, 10K Ohm Type II Thermistor #ad - The 1/4 turn lid comes with a chain to prevent it from being lost during installation. Thermowells are recommended, but not required on the immersion sensors. For variable air volume applications, the series te can be configured to have 8′ plenum rated cable with flying leads. Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. Flanged duct sensors monitor the supply or return air and provide a thermistor or rtd output to the digital controller. The series te duct and immersion temperature sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. For housing models, multiple knockouts provide easy conduit access to any side of the housing. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building.

 

Dwyer Air Duct Temp Sensor TE-DFN-B0848-00 8 Probe 10K Ohm Type II Thermistor 8 Plenum Cable #ad

Dwyer® Air Duct Temp Sensor, TE-DFN-B0848-00, 8″ Probe, 10K Ohm Type II Thermistor, 8′ Plenum Cable

Dwyer® Air Duct Temp Sensor, TE-DFN-B0848-00, 8″ Probe, 10K Ohm Type II Thermistor, 8′ Plenum Cable #ad - For housing models, multiple knockouts provide easy conduit access to any side of the housing. Thermowells are recommended, but not required on the immersion sensors. Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. For variable air volume applications, the series te can be configured to have 8′ plenum rated cable with flying leads. Flanged duct sensors monitor the supply or return air and provide a thermistor or rtd output to the digital controller. The 1/4 turn lid comes with a chain to prevent it from being lost during installation. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. The series te duct and immersion temperature sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit.

 

Mamac Systems Inc TE701A17A Duct Temp Sensor Flange Mountw 3 inch wire leads #ad

Mamac Systems, Inc. TE701A17A Duct Temp Sensor Flange Mountw/ 3 inch wire leads

Mamac Systems, Inc. TE701A17A Duct Temp Sensor Flange Mountw/ 3 inch wire leads #ad - Part. Honeywell. D20k ohm ntc duct temp sensor, 6 in probe, 45-99f, for use with w7751.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Manufacturer direct. Cable rating plenum option includes ul listed plenum cable. Mamac product te-702-c-17-b. Mamac product te-702-c-12-a. Mamac product te-702-c-7-b.

 

Dwyer Air Duct Temp Sensor TE-DFN-B0448-00 4 Probe 10K Ohm Type II Thermistor 8 Plenum Cable #ad

Dwyer® Air Duct Temp Sensor, TE-DFN-B0448-00, 4″ Probe, 10K Ohm Type II Thermistor, 8′ Plenum Cable

Dwyer® Air Duct Temp Sensor, TE-DFN-B0448-00, 4″ Probe, 10K Ohm Type II Thermistor, 8′ Plenum Cable #ad - Standard units come with 4″ leads with an integral terminal block to eliminate carrying extra wire nuts. The 1/4 turn lid comes with a chain to prevent it from being lost during installation. Flanged duct sensors monitor the supply or return air and provide a thermistor or rtd output to the digital controller. For housing models, multiple knockouts provide easy conduit access to any side of the housing. Thermowells are recommended, but not required on the immersion sensors. The series te duct and immersion temperature sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. For variable air volume applications, the series te can be configured to have 8′ plenum rated cable with flying leads. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Accuracy ±022°c @ 25°c (±04°f @ 77°f). Manufacturer direct. Mamac product te-702-c-12-a. Housing material meets ul, 94 v-o polycarbonate plastic. Cable rating plenum option includes ul listed plenum cable.

 

Mamac Systems Inc TE702A4C 8 1K Ohm RTD Duct Temp Sensor #ad

Mamac Systems, Inc. TE702A4C 8″ 1K Ohm RTD Duct Temp Sensor

Mamac Systems, Inc. TE702A4C 8″ 1K Ohm RTD Duct Temp Sensor #ad - Cable rating plenum option includes ul listed plenum cable. Mamac product te-702-c-17-b. Manufacturer direct. Mamac product te-702-c-7-b. Mamac product te-702-c-17-c.

 

Duct Temp Sensor #ad

Duct Temp Sensor

Duct Temp Sensor #ad - Operating temperature limits -40 to 302°f (-40 to 150°c). Housing material meets ul, 94 v-o polycarbonate plastic. Cable rating plenum option includes ul listed plenum cable. Accuracy ±022°c @ 25°c (±04°f @ 77°f). Manufacturer direct.

 

MICRO THERMO 23-0053 230053 Duct Temp Sensor 8 #ad

MICRO THERMO 23-0053 230053 Duct Temp Sensor 8

MICRO THERMO 23-0053 230053 Duct Temp Sensor 8 #ad - This item is new, including original packaging. Belimo, duct temp sensor 450×6 a mult. Belimo, duct temp sensor 50×6 v mult. Belimo, duct temp sensor 450×6 v mult. Belimo, duct temp sensor 300×6 a mult.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.