19 Top 2 Inch Studs

 

HHIP 3421-3984 14-20 x 2 Inch Long Alloy STL Stud #ad

HHIP 3421-3984 1/4-20 x 2 Inch Long Alloy STL Stud

HHIP 3421-3984 1/4-20 x 2 Inch Long Alloy STL Stud #ad - Black oxide finished. Overall length 2″. Made of alloy steel and heat treated. Stud thread 1/4″~20.

 

JW Winco L04-2250 Alloy SteelBlack Oxide TS Swivel Screw Clamp with Pad Inch Size Steel 34-10 Thread 2 Stud Length #ad

J.W. Winco L04-2250 Alloy Steel/Black Oxide TS Swivel Screw Clamp with Pad, Inch Size, Steel, 3/4″-10 Thread, 2″ Stud Length

J.W. Winco L04-2250 Alloy Steel/Black Oxide TS Swivel Screw Clamp with Pad, Inch Size, Steel, 3/4″-10 Thread, 2″ Stud Length #ad - For use where maximum rigidity is necessary or where space is limited. Screws securely hold parts with off-angle surfaces without marring or damaging the surfaces.

 

McGill PCF5 TRAKROL Bearing Stud Type Sealed Inch Steel 5 Roller Diameter 3 Roller Width 4-12 Stud Length 2 Thread Size 7-12 Overall Length 2 Stud Diameter #ad

McGill PCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5″ Roller Diameter, 3″ Roller Width, 4-1/2″ Stud Length, 2″ Thread Size, 7-1/2″ Overall Length, 2″ Stud Diameter

McGill PCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5″ Roller Diameter, 3″ Roller Width, 4-1/2″ Stud Length, 2″ Thread Size, 7-1/2″ Overall Length, 2″ Stud Diameter #ad - Metal extension plug and rubber lip seals help retain lubricant and protect the bearing in contaminated environments. Stud-type design with a cylindrical outer surface provides maximum contact with the track. Cam follower bearing supports combined radial and thrust loads in cam- and track-type applications. Thick outer ring helps minimize deformation under bending stresses. Black oxide- treated bearing steel for durability and corrosion resistance.

 

McGill PCF2 TRAKROL Bearing Stud Type Sealed Inch Steel 2 Roller Diameter 1-1116 Roller Width 2 Stud Length 78 Thread Size 3-1116 Overall Length 78 Stud Diameter #ad

McGill PCF2 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 2″ Roller Diameter, 1-11/16″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-11/16″ Overall Length, 7/8″ Stud Diameter

McGill PCF2 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 2″ Roller Diameter, 1-11/16″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-11/16″ Overall Length, 7/8″ Stud Diameter #ad - Thick outer ring helps minimize deformation under bending stresses. Metal extension plug and rubber lip seals help retain lubricant and protect the bearing in contaminated environments. Cam follower bearing supports combined radial and thrust loads in cam- and track-type applications. Black oxide- treated bearing steel for durability and corrosion resistance. Stud-type design with a cylindrical outer surface provides maximum contact with the track.

 

Koyo CRSB-36 Track Roller Standard Stud SealedHex Hole Inch Steel 2-14 Roller Diameter 1250 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 0875 Stud Diameter #ad

Koyo CRSB-36 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2-1/4″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter

Koyo CRSB-36 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2-1/4″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter #ad - Meets ansi/abma standard 182 for quality assurance. Stud-type design with a hexagonal socket for through-hole or threaded mounting. Full complement of rollers for higher radial load capacity than caged rollers. Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications. Lip seals help retain lubricant and prevent contamination.

 

Koyo CRSBE-32 Track Roller Eccentric Stud Sealed Inch Steel 2 Roller Diameter 1-14 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 78 Stud Diameter #ad

Koyo CRSBE-32 Track Roller, Eccentric Stud, Sealed, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 7/8″ Stud Diameter

Koyo CRSBE-32 Track Roller, Eccentric Stud, Sealed, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 7/8″ Stud Diameter #ad - Meets ansi/abma standard 182 for quality assurance. Eccentric stud with a hexagonal socket enables radial adjustment of the outer ring on the running surface. Full complement of rollers for higher radial load capacity than caged rollers. Lip seals help retain lubricant and prevent contamination. Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications.

 

Koyo CRSBC-32 Track Roller Crowned Sealed Inch Steel 2 Roller Diameter 1-14 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 78 Stud Diameter #ad

Koyo CRSBC-32 Track Roller, Crowned, Sealed, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 7/8″ Stud Diameter

Koyo CRSBC-32 Track Roller, Crowned, Sealed, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 7/8″ Stud Diameter #ad - Lip seals help retain lubricant and prevent contamination. Crowned outer surface optimizes the distribution of contact stress. Stud-type design with a hexagonal socket for through-hole or threaded mounting. Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications. Full complement of rollers for higher radial load capacity than caged rollers.

 

Morton Steel Ball Clamping Screw with Rolling Ball Design Inch Size 58-11 Thread Size 2 Stud Length #ad

Morton Steel Ball Clamping Screw with Rolling Ball Design, Inch Size, 5/8-11 Thread Size, 2″ Stud Length

Morton Steel Ball Clamping Screw with Rolling Ball Design, Inch Size, 5/8-11 Thread Size, 2″ Stud Length #ad - Hardened ball bearing. Blak oxide finish screw. Heat treated socket head screw.

 

Morton Stainless Steel Ball Clamping Screw with Rolling Ball Design Inch Size 58-11 Thread Size 2 Stud Length #ad

Morton Stainless Steel Ball Clamping Screw with Rolling Ball Design, Inch Size, 5/8-11 Thread Size, 2″ Stud Length

Morton Stainless Steel Ball Clamping Screw with Rolling Ball Design, Inch Size, 5/8-11 Thread Size, 2″ Stud Length #ad - 18-8 stainless steel screw. Hardened stainless ball. Stainless steel socket head screw.

 

McGill CF2 Cam Follower Standard Stud UnsealedSlotted Inch Steel 2 Roller Diameter 1-14 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 0875 Stud Diameter #ad

McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter

McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter #ad - Black oxide- treated bearing steel for durability and corrosion resistance. Full complement of rollers for higher radial load capacity than caged rollers. Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications. Stud-type design with a screwdriver slot for through-hole or threaded mounting. Thick outer ring helps minimize deformation under bending stresses.

 

Koyo CRS-36 Track Roller Standard Stud SealedSlotted Inch Steel 2-14 Roller Diameter 1250 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 0875 Stud Diameter #ad

Koyo CRS-36 Track Roller, Standard Stud, Sealed/Slotted, Inch, Steel, 2-1/4″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter

Koyo CRS-36 Track Roller, Standard Stud, Sealed/Slotted, Inch, Steel, 2-1/4″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter #ad - Full complement of rollers for higher radial load capacity than caged rollers. Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications. Meets ansi/abma standard 182 for quality assurance. Stud-type design with a screwdriver slot for through-hole or threaded mounting. Lip seals help retain lubricant and prevent contamination.

 

Koyo CR-32 Track Roller Standard Stud UnsealedSlotted Inch Steel 2 Roller Diameter 1250 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 0875 Stud Diameter #ad

Koyo CR-32 Track Roller, Standard Stud, Unsealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter

Koyo CR-32 Track Roller, Standard Stud, Unsealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter #ad - Thick outer ring helps minimize deformation under bending stresses. Full complement of rollers for higher radial load capacity than caged rollers. Meets ansi/abma standard 182 for quality assurance. Stud-type design with a screwdriver slot for through-hole or threaded mounting. Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications.

 

McGill CFH2S Cam Follower Heavy Stud SealedSlotted Inch Steel 2 Roller Diameter 1-14 Roller Width 2 Stud Length 1-18 Thread Size 3-932 Overall Length 1-18 Stud Diameter #ad

McGill CFH2S Cam Follower, Heavy Stud, Sealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 1-1/8″ Thread Size, 3-9/32″ Overall Length, 1-1/8″ Stud Diameter

McGill CFH2S Cam Follower, Heavy Stud, Sealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 1-1/8″ Thread Size, 3-9/32″ Overall Length, 1-1/8″ Stud Diameter #ad - Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications. Nylon lip seals help retain lubricant and prevent contamination. Full complement of rollers for higher radial load capacity than caged rollers. Black oxide- treated bearing steel for durability and corrosion resistance. Heavy-duty stud-type design with a screwdriver slot supports heavier static loads than a standard stud.

 

McGill CF2S Cam Follower Standard Stud SealedSlotted Inch Steel 2 Roller Diameter 1-14 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 0875 Stud Diameter #ad

McGill CF2S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter

McGill CF2S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1-1/4″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter #ad - Full complement of rollers for higher radial load capacity than caged rollers. Nylon lip seals help retain lubricant and prevent contamination. Stud-type design with a screwdriver slot for through-hole or threaded mounting. Black oxide- treated bearing steel for durability and corrosion resistance. Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications.

 

McGill FCF2 TRAKROL Bearing Stud Type Sealed Inch Steel 2 Roller Diameter 1-1116 Roller Width 2 Stud Length 78 Thread Size 3-1116 Overall Length 78 Stud Diameter #ad

McGill FCF2 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 2″ Roller Diameter, 1-11/16″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-11/16″ Overall Length, 7/8″ Stud Diameter

McGill FCF2 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 2″ Roller Diameter, 1-11/16″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-11/16″ Overall Length, 7/8″ Stud Diameter #ad - Stud-type design with a flanged outer surface helps direct the load axially. Metal extension plug and rubber lip seals help retain lubricant and prevent contamination. Black oxide- treated bearing steel for durability and corrosion resistance. Thick outer ring helps minimize deformation under bending stresses. Cam follower bearing supports combined radial and thrust loads in guide rail applications.

 

JW Winco L04-2325 Alloy SteelBlack OxidePlastic TS Swivel Screw Clamp with Delrin Pad Inch Size Steel 34-10 Thread 2 Stud Length #ad

J.W. Winco L04-2325 Alloy Steel/Black Oxide/Plastic TS Swivel Screw Clamp with Delrin Pad, Inch Size, Steel, 3/4″-10″ Thread, 2″ Stud Length

J.W. Winco L04-2325 Alloy Steel/Black Oxide/Plastic TS Swivel Screw Clamp with Delrin Pad, Inch Size, Steel, 3/4″-10″ Thread, 2″ Stud Length #ad - Screws securely hold parts with off-angle surfaces without marring or damaging the surfaces. For use where maximum rigidity is necessary or where space is limited.

 

16-14 AWG Nylon Insulated Ring Terminal 1⁄2 Inch Stud - 50 Count #ad

16-14 AWG Nylon Insulated Ring Terminal 1⁄2 Inch Stud – 50 Count

16-14 AWG Nylon Insulated Ring Terminal 1⁄2 Inch Stud – 50 Count #ad - 44 width 0. 755 brand equivalent morris 11348 panduit pn14-12r-q thomas & betts rb14-12 manufacturer nsi industries part number r16-50n upc 662381068675 we have the best selection and prices on mini terminals. Nylon, 600v, 105 degrees c features style standard material nylon quantity 50 count wire size 16-14 awg stud size 1/2 inch length 1. Nsi nylon insulated ring terminals are made of electro tin-plated copper with brazed seam, easy entry. Safe and reliable connections because it cannot be disconnected unless the screw is completely removed. 16-14 awg nylon insulated ring terminal 1/2 inch stud, 50 countnylon ring terminals are basic tongue type ring terminals.

 

McGill VCF3 12 TRAKROL Bearing Stud Type Sealed Inch Steel 3-12 Roller Diameter 1-1116 Roller Width 2 Stud Length 78 Thread Size 3-1116 Overall Length 78 Stud Diameter #ad

McGill VCF3 1/2 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 3-1/2″ Roller Diameter, 1-11/16″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-11/16″ Overall Length, 7/8″ Stud Diameter

McGill VCF3 1/2 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 3-1/2″ Roller Diameter, 1-11/16″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-11/16″ Overall Length, 7/8″ Stud Diameter #ad - Stud-type design with a v-grooved outer surface helps reduce track contamination buildup. Black oxide- treated bearing steel for durability and corrosion resistance. Cam follower bearing supports combined radial and thrust loads in v-shaped track applications. Thick outer ring helps minimize deformation under bending stresses. Metal extension plug and rubber lip seals help retain lubricant and prevent contamination.

 

Koyo CRS-32 Track Roller Standard Stud SealedSlotted Inch Steel 2 Roller Diameter 1250 Roller Width 2 Stud Length 78 Thread Size 3-932 Overall Length 0875 Stud Diameter #ad

Koyo CRS-32 Track Roller, Standard Stud, Sealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter

Koyo CRS-32 Track Roller, Standard Stud, Sealed/Slotted, Inch, Steel, 2″ Roller Diameter, 1.250″ Roller Width, 2″ Stud Length, 7/8″ Thread Size, 3-9/32″ Overall Length, 0.875″ Stud Diameter #ad - Full complement of rollers for higher radial load capacity than caged rollers. Stud-type design with a screwdriver slot for through-hole or threaded mounting. Lip seals help retain lubricant and prevent contamination. Meets ansi/abma standard 182 for quality assurance. Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.