21 Top Stainless Steel Discs

 

Stainless Steel Disc Bolts YamahaOther Pk x 12

Stainless Steel Disc Bolts Yamaha/Other Pk x 12

Stainless Steel Disc Bolts Yamaha/Other Pk x 12 - Fits all front & rear discs of early models. Price per set of 12. Not only strong but also offers great corrosion resistance. Please note this is a shouldered bolt see our brochure for silhouettes. Stainless steel highly polished disc bolt (earlier models) allen key head m6 thread (1. 00pitch) x 20mm length.

 

Stainless Steel Disc Bolt Honda Front Pk x 15

Stainless Steel Disc Bolt Honda Front Pk x 15

Stainless Steel Disc Bolt Honda Front Pk x 15 - Sold individually. Replace your stock brake rotor bolts with these high-quality ones from pro-bolt. Available in stainless steel or titanium.

 

Jomar  900-05DSVL 5” BFV-Wafer Viton Seats Wafer Style Epoxy-Coated Ductile Iron Body Stainless Steel Disc

Jomar | 900-05DSVL, 5”, BFV-Wafer Viton Seats, Wafer Style, Epoxy-Coated Ductile Iron Body, Stainless Steel Disc

Jomar | 900-05DSVL, 5”, BFV-Wafer Viton Seats, Wafer Style, Epoxy-Coated Ductile Iron Body, Stainless Steel Disc - Available in stainless steel or titanium. Replace your stock brake rotor bolts with these high-quality ones from pro-bolt. Sold individually.

 

Stainless Steel Disc Bolt Aprilia Pk x 18

Stainless Steel Disc Bolt Aprilia Pk x 18

Stainless Steel Disc Bolt Aprilia Pk x 18 - Available in stainless steel or titanium. Replace your stock brake rotor bolts with these high-quality ones from pro-bolt. Sold individually.

 

Stainless Steel Disc Bolt Triumph Pack x 5

Stainless Steel Disc Bolt Triumph Pack x 5

Stainless Steel Disc Bolt Triumph Pack x 5 - Please note this is a shouldered bolt see our brochure for silhouettes. Not only strong but also offers great corrosion resistance. Fits many models of triumph, varies front, rear or both. Stainless steel highly polished triumph disc bolt, allen key head m8 thread (1. 25pitch) x 30mm length. Price per set of 5.

 

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc Lever-Lock Handle Lug 4

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 4″

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 4″ - Compatible with pipe flange classes class 125, class 150. 250 psi/172 bar non-shock cold working pressure. Geometric drive. End of line service at 250 psi with no downstream flange. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners.

 

NIBCO LD-3122-5 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc Gear Operator Lug 10

NIBCO LD-3122-5 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Gear Operator, Lug, 10″

NIBCO LD-3122-5 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Gear Operator, Lug, 10″ - 250 psi/172 bar non-shock cold working pressure. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. Geometric drive. End of line service at 250 psi with no downstream flange. Compatible with pipe flange classes class 125, class 150.

 

Stainless Steel Disc Bolt Ducati M8 x 20mm Pack x 6

Stainless Steel Disc Bolt Ducati M8 x 20mm Pack x 6

Stainless Steel Disc Bolt Ducati M8 x 20mm Pack x 6 - Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. Geometric drive. Compatible with pipe flange classes class 125, class 150. End of line service at 250 psi with no downstream flange. 250 psi/172 bar non-shock cold working pressure.

 

Jomar  900-04DSVL 4” BFV-Wafer Viton Seats Wafer Style Epoxy-Coated Ductile Iron Body Stainless Steel Disc

Jomar | 900-04DSVL, 4”, BFV-Wafer Viton Seats, Wafer Style, Epoxy-Coated Ductile Iron Body, Stainless Steel Disc

Jomar | 900-04DSVL, 4”, BFV-Wafer Viton Seats, Wafer Style, Epoxy-Coated Ductile Iron Body, Stainless Steel Disc - Overall dimensions 29″ (w) x 29″ (d). Fuel natural gas. Btus 65,000. Stainless steel disc. Model # fpb-29dbstms-n.

 

Stainless Steel Disc Bolt YamahaOther M8 x 25mm

Stainless Steel Disc Bolt Yamaha/Other M8 x 25mm

Stainless Steel Disc Bolt Yamaha/Other M8 x 25mm - Please see below for silhouette. Priced individually and listed in model specific bike sections where fitment has been established. 25pitch) x 25mm length. Not only strong but also offers great corrosionresistance. Stainless steel highly polished standard yamaha disc bolt, allen key head m8 thread (1. Fits many models of yamaha, especially early models, fits front & rear.

 

Firegear FPB-34DBSTMS-N 34 Round Stainless Steel Disc - NG

Firegear FPB-34DBSTMS-N 34″ Round Stainless Steel Disc – NG

Firegear FPB-34DBSTMS-N 34″ Round Stainless Steel Disc – NG - Dim from bottom of disc to bottom of appliance 3. 87″. Specifications overall dimensions 34″ (w) x 34″ (d). Firegear’s unique thermocouple manual safety (tms) kits are designed to provide a simple match light ignition system that includes an automatic flame sensor in order to monitor flame presence and shut off gas supply if flames are lost. Both the burner and the pan are constructed from heavy duty 304 stainless steel to create a long lasting and durable product while the unique “spur” design creates a realistic flame appearance. Clearance to combustible ceiling 69″. Includes burner, disc pan, flex line, shut off valve, pilot assembly, and valve mounting plate. Clearance to combustible floor from the lip of pan 18″. Btus 65,000. Height of spur 1. The fpb-dbstms ul listed match light gas fire pit burner kit with flame sensing, round flat pan by firegear provides a high quality burner system to complete your gas fire pit project. Stainless steel disc. These kits are ul listed to ensure safety and performance. Stainless steel burning spur. Clearance to combustible side wall 19″. Features fuel natural gas.

 

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc Lever-Lock Handle Lug 2

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 2″

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 2″ - 250 psi/172 bar non-shock cold working pressure. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. Compatible with pipe flange classes class 125, class 150. End of line service at 250 psi with no downstream flange. Geometric drive.

 

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc Lever-Lock Handle Lug 8

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 8″

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 8″ - Compatible with pipe flange classes class 125, class 150. 250 psi/172 bar non-shock cold working pressure. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. End of line service at 250 psi with no downstream flange. Geometric drive.

 

440C Stainless Steel Disc Unpolished Mill Finish 5 Diameter 3 Thickness

440C Stainless Steel Disc, Unpolished (Mill) Finish, 5″ Diameter, 3″ Thickness

440C Stainless Steel Disc, Unpolished (Mill) Finish, 5″ Diameter, 3″ Thickness - Martensitic grades can be heat treated. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. The 440c stainless steel grade is wear resistant, offers mild corrosion resistance, and can be heat treated to very high hardness. Formability indicates how easily the material can be permanently shaped. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. It can attain higher hardness than 440a and 440b when in the hardened condition. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Magnetism characterizes how much the material is repelled by or attracted to a magnet. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. A martensitic stainless steel, 440c is magnetic. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The 440c stainless steel disc has an unpolished (mill) surface, meets american society for testing and materials international astm a276 specifications, and has a standard tolerance.

 

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc Lever-Lock Handle Lug 5

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 5″

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 5″ - 250 psi/172 bar non-shock cold working pressure. Geometric drive. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. Compatible with pipe flange classes class 125, class 150. End of line service at 250 psi with no downstream flange.

 

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc Lever-Lock Handle Lug 8

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 8″

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 8″ - 250 psi/172 bar non-shock cold working pressure. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. End of line service at 250 psi with no downstream flange. Geometric drive. Compatible with pipe flange classes class 125, class 150.

 

Jomar  600-20DSPB 20” BFV-Lug PTFE Seats Lug Style Butterfly Valve Epoxy-Coated Ductile Iron Body Stainless Steel Disc

Jomar | 600-20DSPB, 20”, BFV-Lug PTFE Seats, Lug Style Butterfly Valve, Epoxy-Coated Ductile Iron Body, Stainless Steel Disc

Jomar | 600-20DSPB, 20”, BFV-Lug PTFE Seats, Lug Style Butterfly Valve, Epoxy-Coated Ductile Iron Body, Stainless Steel Disc - Replace your stock brake rotor bolts with these high-quality ones from pro-bolt. Available in stainless steel or titanium. Sold individually.

 

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc Lever-Lock Handle Lug 6

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 6″

NIBCO LD-3022-3 Series Ductile Iron Butterfly Valve with EPDM Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 6″ - Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. Geometric drive. Compatible with pipe flange classes class 125, class 150. 250 psi/172 bar non-shock cold working pressure. End of line service at 250 psi with no downstream flange.

 

Dixon BFVW300 Ductile Iron Wafer Style Butterfly Valve with Stainless Steel Disc and Buna-N liner 3 Size 200 psi Pressure

Dixon BFVW300 Ductile Iron Wafer Style Butterfly Valve with Stainless Steel Disc and Buna-N liner, 3″ Size, 200 psi Pressure

Dixon BFVW300 Ductile Iron Wafer Style Butterfly Valve with Stainless Steel Disc and Buna-N liner, 3″ Size, 200 psi Pressure - Made of ductile iron. Wafer style butterfly valve. Stainless steel top and bottom stems. Ductile iron body, astm a536. Size 3″. For use between two 150 lbs flanges. Rated to 200 psi pressure at ambient temperature (70 degree f). The number of holes on the valve depends on the body size. Will lock “open” or “closed”. Stainless steel disc, astm a351, gr. Buna-n seal and stem seals. Buna-n liner. Cf-8m. Ptfe bushing.

 

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc Lever-Lock Handle Lug 2-12

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 2-1/2″

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 2-1/2″ - 250 psi/172 bar non-shock cold working pressure. Geometric drive. End of line service at 250 psi with no downstream flange. Compatible with pipe flange classes class 125, class 150. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners.

 

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc Lever-Lock Handle Lug 3

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 3″

NIBCO LD-3122-3 Series Ductile Iron Butterfly Valve with Buna-N Liner and Stainless Steel Disc, Lever-Lock Handle, Lug, 3″ - Compatible with pipe flange classes class 125, class 150. Molded-in seat liner eliminates leakage between body and liner as in cartridge or boot type liners. End of line service at 250 psi with no downstream flange. Geometric drive. 250 psi/172 bar non-shock cold working pressure.