22 Best and Coolest Stainless Steel Anchors

 

Osculati Stainless Steel Anchor Chain Flush Pin Shackle Swivel 118x20x22x10mm

Osculati Stainless Steel Anchor Chain Flush Pin Shackle Swivel 118x20x22x10mm

Osculati Stainless Steel Anchor Chain Flush Pin Shackle Swivel 118x20x22x10mm - Halyards. Ideal for mooring buoys. Item name stainless steel shackle swivelpart brand osculatipart number 01. Anchor chains. 02 variant version with shackle + shackle (flush pin)a 118 mmb 20 mmc 22 mmd 10 mmimportant very sturdy. 439. Forged steel. Etc.

 

U-Turn - 34 x 4-34 Wedge Anchor 304 Stainless Steel 5 Pcs

U-Turn – 3/4 x 4-3/4 Wedge Anchor 304 Stainless Steel (5 Pcs)

U-Turn – 3/4 x 4-3/4 Wedge Anchor 304 Stainless Steel (5 Pcs) - 3rd assemble the anchor with nut and washer, and hammer through object being fastened into the concrete. 4th set the anchor by tightening 3-5 turns. A heavy duty anchor designed for attaching items to concrete. For installation, 1st drill a hole in concrete equal to or exceeding minimum embedment. Commonly used with vibration prone objects such as motors, generators, and conveyors, but also used with racking systems, pipe hangers, and rails. 2nd clean hole of debris and dust.

 

38 x 3 Titen HD Heavy Duty Screw Anchor 304 Stainless Steel 10

3/8″ x 3″ Titen HD Heavy Duty Screw Anchor 304 Stainless Steel (10)

3/8″ x 3″ Titen HD Heavy Duty Screw Anchor 304 Stainless Steel (10) - When matched to the appropriate environment and application, anchors made from type 300 series stainless steel will resist the effects of corrosion and maintain their strength and integrity. Type 316 is the optimal choice for applications in corrosive or extreme environments such as salt water, or when chemical or corrosive solutions are present. Corrosion resistant, for dry, interior applications, carbon-steel corrosion is not a risk, but in any kind of exterior, coastal or chemical environment the anchor would be susceptible to corrosion. Type 300 series stainless-steel screw anchors have different corrosion-resistant properties for different environments. The titen hd stainless-steel screw anchor for concrete and masonry sets the new standard for when the job calls for installation in multiple types of environments. With the introduction of the thdss, there is a state-of-the-art anchor solution that combines the corrosion resistance of type 300 series stainless steel with the undercutting ability of heat-treated carbon-steel cutting threads. Drill it. Forget it. It is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for an unsurpassed peace-of-mind. Drive it. In order for these threads to be durable enough to cut into the concrete, they are formed from carbon steel that is then hardened and brazed onto the tip of the anchor. Titen hd screw anchors are a trusted anchor solution because they offer the performance that specifiers need and the ease of installation that contractors demand. Type 304 is a cost-effective solution for less extreme applications where the environment may be wet, moist or damp. Innovative design, the serrated carbon-steel threads on the tip of the stainless-steel titen hd are vital because they undercut the concrete as the anchor is driven into the hole, making way for the rest of the threads to interlock with the concrete.

 

uxcell M6 x 50 Expansion Eyebolt Eye Nut Screw with Ring 304 Stainless Steel Anchor Raw Bolts 1 Pcs

uxcell M6 x 50 Expansion Eyebolt Eye Nut Screw with Ring 304 Stainless Steel Anchor Raw Bolts 1 Pcs

uxcell M6 x 50 Expansion Eyebolt Eye Nut Screw with Ring 304 Stainless Steel Anchor Raw Bolts 1 Pcs - Details the eye type is drop forged eye, such eye bolts are designed to attach a securing eye to a structure and then tie to ropers or cables. Application fit the concrete wall or masonry, for hanging or lefting the super heavy things like a big shelf it’s durable and reliable. Materials made of premium 304 stainless steel, provides a rust protection and precise size. Installation suggested a 10mm dia hole for drilling, and tight the anchor bolt with a wrench after putting the screw the bolt transfers forces to the sleeve, with the expansion of sleeve, a solid connection has been built between a concrete wall and the wedge anchor nut. Main size standard m6 expansion bolts with 75mm length, and the ring inner diameter is 16mm.

 

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 38 to 3-58 Grip Range For 14-20 UNC Fastener Size Pack of 100

TOGGLER SNAPTOGGLE BBS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 1/4″-20 UNC Fastener Size (Pack of 100)

TOGGLER SNAPTOGGLE BBS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 1/4″-20 UNC Fastener Size (Pack of 100) - Made in usa, and works with 1/4″-20 unc-threaded metal bolts (sold separately). Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Toggle anchor installs behind 3/8″- to 3-5/8″-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Ultimate tensile strength is 265 lb in 1/2″ drywall and 1,080 lb in concrete block with a 1/4″-20 unc bolt.

 

Erickson 09104 Stainless Steel Anchor - 1200 lb Load Capacity Pack of 2

Erickson 09104 Stainless Steel Anchor – 1200 lb. Load Capacity, (Pack of 2)

Erickson 09104 Stainless Steel Anchor – 1200 lb. Load Capacity, (Pack of 2) - Each anchor has a 12,000 pounds maximum load limit. Count on erickson. Erickson manufacturing has been producing tie-down straps and related products for over 25 years. Tie it. 2 pack of stainless steel anchors. Load it. As a manufacturer of tie-down and towing products in north america, erickson manufacturing strives to provide the safest products with the consumer in mind. Tow it.

 

516 Inch Stainless Steel Type 316 Bolt Type Anchor Shackles in a 4 Pack - Each With a 065 Ton Capacity

5/16 Inch Stainless Steel Type 316 Bolt Type Anchor Shackles in a 4 Pack – Each With a 0.65 Ton Capacity

5/16 Inch Stainless Steel Type 316 Bolt Type Anchor Shackles in a 4 Pack – Each With a 0.65 Ton Capacity - Material durable stainless steel type 316 contains molybdenum for added corrosion resistance, particularly useful in high chloride environments. Quantity 4 shackles. Safety factor 41. Diameter 5/16″ | pin size 3/8″ | inside height 122″ | mouth width 053″ | weight 02 lbs shackles are sized accordingly to the diameter of the bow section rather than the pin size. Working load limit 065 ton wll is embossed on each shackle never exceed the working load limit.

 

M10 x 100 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces

M10 x 100 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces

M10 x 100 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces - Installation suggested a diameter of 14 mm hole to drill and tighten the anchor bolt with a wrench after installing the screw the bolt transfers forces to the sleeve, with the expansion of the sleeve, a solid connection has been built between a concrete wall and the wedge anchor nut. Main size standard m10 expansion bolts with 130 mm length and the inner diameter of the ring is 25 mm. Request place the concrete wall or masonry to hang or lift super heavy things like a large shelf it is durable and reliable. Details the type of eye is forged eye, such eye bolts are designed to attach a safety eye to a structure and then tie it to ropes or cables. Materials made of premium 304 stainless steel, it provides protection against oxidation and precise size.

 

316 Stainless Steel Anchor Eye 1 S3701-0001

316 Stainless Steel Anchor Eye #1 (S3701-0001)

316 Stainless Steel Anchor Eye #1 (S3701-0001) - Complies with all applicable osha and ansi standards. For more information, instruction manuals & product pictures please visit superanchorcom. 20ga stainless steel anchor. Ideal for most types of roofing material. Sheeted roofs with minimum 2×4 top chord.

 

Red Head WW-1242 Trubolt Type 304 Stainless Steel Wedge 12-Inch by 4-14-Inch Anchor 25 per Box

Red Head WW-1242 Trubolt Type 304 Stainless Steel Wedge 1/2-Inch by 4-1/4-Inch Anchor (25 per Box)

Red Head WW-1242 Trubolt Type 304 Stainless Steel Wedge 1/2-Inch by 4-1/4-Inch Anchor (25 per Box) - Anchor diameter equals hole diameter. Typical applications include cladding and stadium seating. Resists organic chemicals, dye stuffs, and many inorganic chemicals. Stainless steel expansion clip. Withstands rusting in architectural and food processing environments.

 

M8 x 70 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces

M8 x 70 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces

M8 x 70 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces - Main size standard m8 expansion bolts with a length of 95 mm and the inner diameter of the ring is 20 mm. Materials made of premium 304 stainless steel, it provides protection against oxidation and precise size. Details the type of eye is forged eye, such eye bolts are designed to attach a safety eye to a structure and then tie it to ropes or cables. Installation suggested a diameter of 12 mm hole to drill and tighten the anchor bolt with a wrench after installing the screw the bolt transfers forces to the sleeve, with the expansion of the sleeve, a solid connection has been built between a concrete wall and the wedge anchor nut. Request place the concrete wall or masonry to hang or lift super heavy things like a large shelf it is durable and reliable.

 

6pcs M6x80mm Ring Lifting Expansion Eyebolt Screw 304 Stainless Steel Anchor Internal Eye Bolt Fastener

6pcs M6x80mm Ring Lifting Expansion Eyebolt Screw 304 Stainless Steel Anchor Internal Eye Bolt Fastener

6pcs M6x80mm Ring Lifting Expansion Eyebolt Screw 304 Stainless Steel Anchor Internal Eye Bolt Fastener - Thread size is m6 the bolt length is 80mm, the overall length including lifting ring is approx 100mm. Quantity and package pack of 6 sets, each set including eye nut, hex nut, spring washer, washer, stainless steel bolt and expansion pipe. Good quality made of high quality 304 stainless steel, suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance. Exquisite workmanship smooth surface, no burr clear thread for better fastening effect full tube designed expansion pipe, stronger bearing capacity and better strength of extension after expansion. Mainly applied to fix the both ends of rope, and widely used in home decoration, rail, mechanical engineering.

 

CONFAST 38 x 3-34 316 Stainless Steel Wedge Anchor 50 per Box

CONFAST 3/8″ x 3-3/4″ 316 Stainless Steel Wedge Anchor (50 per Box)

CONFAST 3/8″ x 3-3/4″ 316 Stainless Steel Wedge Anchor (50 per Box) - Wide range of sizes, insures proper fastener for best results. Made from highest grade 316 stainless steel, suitable for use in many caustic environments for superior rust resistance. Packaged with nuts and washers, fast, quick, complete installation. Hole size is anchor size, simplicity and ease of installation.

 

Red Head SLDT-3816 Stainless Steel Large Diameter Tapcon 38-Inch by 1-34-Inch Anchor 50 per Box

Red Head SLDT-3816 Stainless Steel Large Diameter Tapcon 3/8-Inch by 1-3/4-Inch Anchor (50 per Box)

Red Head SLDT-3816 Stainless Steel Large Diameter Tapcon 3/8-Inch by 1-3/4-Inch Anchor (50 per Box) - Finished hex washer head, with anti-rotation serrations. Cuts it’s own threads into concrete. Anchor is stamped with a length identification code. Use standard drill bits. Anchor bodies are made from stainless steel.

 

M10 x 80 Expansion Eye nut Screw Screw with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces

M10 x 80 Expansion Eye nut Screw Screw with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces

M10 x 80 Expansion Eye nut Screw Screw with Ring 304 Stainless Steel Anchor Raw Bolts 2 Pieces - Details the type of eye is forged eye, such eye bolts are designed to attach a safety eye to a structure and then tie it to ropes or cables. Main size standard m10 expansion bolts with 110 mm length and the inner diameter of the ring is 25 mm. Materials made of premium 304 stainless steel, it provides protection against oxidation and precise size. Request place the concrete wall or masonry to hang or lift super heavy things like a large shelf it is durable and reliable. Installation suggested a diameter of 14 mm hole to drill and tighten the anchor bolt with a wrench after installing the screw the bolt transfers forces to the sleeve, with the expansion of the sleeve, a solid connection has been built between a concrete wall and the wedge anchor nut.

 

SR Smith AS-200B-SS Residential 4-Inch Wedge Anchor Stainless Steel 150 Outer Diameter

S.R. Smith AS-200B-SS Residential 4-Inch Wedge Anchor, Stainless Steel, 1.50″ Outer Diameter

S.R. Smith AS-200B-SS Residential 4-Inch Wedge Anchor, Stainless Steel, 1.50″ Outer Diameter - Creates less corrosion for nicer, longer lasting look. Helps extend the life of pool deck equipment. No assembly required. Stainless steel products like games, and ladders & rails placed in stainless steel anchors resist corrosion which can cause discoloration.

 

WingIts MAWHP35B24 Master Anchor with Stainless Steel Hook Plate Bulk Pack 24-Pack

WingIts MAWHP35B24 Master Anchor with Stainless Steel Hook Plate, Bulk Pack, 24-Pack

WingIts MAWHP35B24 Master Anchor with Stainless Steel Hook Plate, Bulk Pack, 24-Pack - Our patented wingits’ fasteners with hook plates will never loosen. Installs in all hollow walls in just minutes and lasts a lifetime. Install using the apache200 drill bit (rc-wa200gts34) to drill through the material easily with your cordless drill. Objects can be easily removed and replaced. Even works in the holes created by others failure.

 

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 38 to 3-58 Grip Range For 316-24 UNC Fastener Size Pack of 100

TOGGLER SNAPTOGGLE BAS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 3/16″-24 UNC Fastener Size (Pack of 100)

TOGGLER SNAPTOGGLE BAS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8″ to 3-5/8″ Grip Range, For 3/16″-24 UNC Fastener Size (Pack of 100) - Toggle anchor installs behind 3/8″- to 3-5/8″-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material. Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes. Ultimate tensile strength is 238 lb in 1/2″ drywall and 802 lb in concrete block with a 3/16″-24 unc bolt. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Made in usa, and works with 3/16″-24 unc-threaded metal bolts (sold separately).

 

316 Stainless Steel Anchor Swivel Jaw Anchor Swivel Chain Connector 316 Stainless Steel Boat Rust-Resistant Accessory Swivel Jaw Swivel Anchor Chain Connector for Boat Stainless Steel

316 Stainless Steel Anchor Swivel Jaw, Anchor Swivel Chain Connector, 316 Stainless Steel Boat Rust-Resistant Accessory Swivel Jaw, Swivel Anchor Chain Connector, for Boat Stainless Steel

316 Stainless Steel Anchor Swivel Jaw, Anchor Swivel Chain Connector, 316 Stainless Steel Boat Rust-Resistant Accessory Swivel Jaw, Swivel Anchor Chain Connector, for Boat Stainless Steel - Delicate and practical, high hardness, firm and strong. Rigorous making sure every single swivel chain connector is perfect and of high quality. High structural strength ensure its stability in use and of long service life. Polished with mirror polishing treatment for better surface smoothness and flatness. Resistant to rust and corrosion,suitable for harsh environment on sea.

 

M8 x 120 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Rough Bolts 1 Piece

M8 x 120 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Rough Bolts 1 Piece

M8 x 120 Screw nut with Expansion Eye Bolt with Ring 304 Stainless Steel Anchor Rough Bolts 1 Piece - Materials made of premium 304 stainless steel, it provides protection against oxidation and precise size. Request place the concrete wall or masonry to hang or lift super heavy things like a large shelf it is durable and reliable. Main size standard m8 expansion bolts with 145 mm length and the inner diameter of the ring is 20 mm. Details the type of eye is forged eye, such eye bolts are designed to attach a safety eye to a structure and then tie it to ropes or cables. Installation suggested a diameter of 12 mm hole to drill and tighten the anchor bolt with a wrench after installing the screw the bolt transfers forces to the sleeve, with the expansion of the sleeve, a solid connection has been built between a concrete wall and the wedge anchor nut.

 

MKT Sup-R-Drop 316 Stainless Steel Mechanical Anchor 14-20 Thread Size 38 Diameter x 1 Length Pack of 25

MKT Sup-R-Drop 316 Stainless Steel Mechanical Anchor, 1/4″-20 Thread Size, 3/8″ Diameter x 1″ Length (Pack of 25)

MKT Sup-R-Drop 316 Stainless Steel Mechanical Anchor, 1/4″-20 Thread Size, 3/8″ Diameter x 1″ Length (Pack of 25) - 3/8-inches hole diameter. Ideal for flush-mounting applications. Concerns dead load only, hole depth must be equal to anchor length and do not over torque. S. Spec ff-s-325c, group viii, type 1. Measures 3/8-inches diameter by 1-inches length. Preassembled for ease of installation. 1/4″-20 thread size. Knurled body increases frictional forces between anchor and wall of hole. Mkt fastening sup-r-drop mechanical anchoring system is made of 316 stainless steel. Female threads accept standard unc bolts or threaded rods. 1-inch minimum embedment. Slotted body is precision matched to a tapered internal plug for solid uniform expansion. 1/4-inches unc bolt size. A. 5 foot pounds maximum torque. Ultimate tension in 2000 psi concrete 2050 pounds and ultimate tension in 4000 psi concrete 2104 pounds. Approvals/listings g. Ultimate shear 1321 pounds.

 

MKT Sup-R-Drop 316 Stainless Steel Mechanical Anchor 12-13 Thread Size 58 Diameter x 2 Length Pack of 25

MKT Sup-R-Drop 316 Stainless Steel Mechanical Anchor, 1/2″-13 Thread Size, 5/8″ Diameter x 2″ Length (Pack of 25)

MKT Sup-R-Drop 316 Stainless Steel Mechanical Anchor, 1/2″-13 Thread Size, 5/8″ Diameter x 2″ Length (Pack of 25) - 2-inches minimum embedment. 20 foot pounds maximum torque. Spec ff-s-325c, group viii, type 1, ul listed, fm approved. Ideal for flush-mounting applications. 1/2-inches unc bolt size. Concerns dead load only, hole depth must be equal to anchor length and do not over torque. Ultimate tension in 2000 psi concrete 5312 pounds and ultimate tension in 4000 psi concrete 7398 pounds. Measures 5/8-inches diameter by 2-inches length. 1/2″-13 thread size. Ultimate shear 5854 pounds. S. Knurled body increases frictional forces between anchor and wall of hole. Approvals/listings g. Preassembled for ease of installation. Female threads accept standard unc bolts or threaded rods. Slotted body is precision matched to a tapered internal plug for solid uniform expansion. 5/8-inches hole diameter. A. Mkt fastening sup-r-drop mechanical anchoring system is made of 316 stainless steel.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.