22 Best Polyacetal Poms

 

JW Winco 12N74JAD GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M12 x 74 mm Stud Length 25 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 12N74JAD GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 74 mm Stud Length, 25 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 12N74JAD GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 74 mm Stud Length, 25 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. As a result, the studs can be screwed into position from the ball side.

 

JW Winco 10N57JAB GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M10 x 57 mm Stud Length 18 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 10N57JAB GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 57 mm Stud Length, 18 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 10N57JAB GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 57 mm Stud Length, 18 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. As a result, the studs can be screwed into position from the ball side. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled.

 

JW Winco 8N20JAF GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M8 x 20 mm Stud Length 40 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 8N20JAF GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 20 mm Stud Length, 40 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 8N20JAF GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 20 mm Stud Length, 40 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Another good feature is a smaller size ball diameter than the trunk of the threaded stud. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. As a result, the studs can be screwed into position from the ball side. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes.

 

JW Winco 6N46JAA GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M6 x 46 mm Stud Length 15 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 6N46JAA GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M6 x 46 mm Stud Length, 15 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 6N46JAA GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M6 x 46 mm Stud Length, 15 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - As a result, the studs can be screwed into position from the ball side. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes.

 

JW Winco 10N74JAD GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M10 x 74 mm Stud Length 25 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 10N74JAD GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 74 mm Stud Length, 25 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 10N74JAD GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 74 mm Stud Length, 25 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - As a result, the studs can be screwed into position from the ball side. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled.

 

JW Winco 15W450G32 GN631 Thrust Pad 15 mm Base Diameter Fits M6 x 10 Grub Screw Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 15W450G32 GN631 Thrust Pad, 15 mm Base Diameter, Fits M6 x 1.0 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 15W450G32 GN631 Thrust Pad, 15 mm Base Diameter, Fits M6 x 1.0 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM) - It is easy to press the ball point of the grub screw into the thrust pad by hand. The resulting assembly leans to accommodate uneven surfaces. Gn 631 thrust pads, when used with gn 632. 1 grub screws, are a low cost solution for clamping operations or for load bearing purposes.

 

JW Winco 18W610G32 GN631 Thrust Pad 18 mm Base Diameter Fits M8 x 125 Grub Screw Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 18W610G32 GN631 Thrust Pad, 18 mm Base Diameter, Fits M8 x 1.25 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 18W610G32 GN631 Thrust Pad, 18 mm Base Diameter, Fits M8 x 1.25 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM) - It is easy to press the ball point of the grub screw into the thrust pad by hand. 1 grub screws, are a low cost solution for clamping operations or for load bearing purposes. Gn 631 thrust pads, when used with gn 632. The resulting assembly leans to accommodate uneven surfaces.

 

JW Winco 8N20JAC GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M8 x 20 mm Stud Length 21 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 8N20JAC GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 20 mm Stud Length, 21 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 8N20JAC GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 20 mm Stud Length, 21 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. As a result, the studs can be screwed into position from the ball side.

 

JW Winco 8N58JAA GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M8 x 58 mm Stud Length 15 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 8N58JAA GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 58 mm Stud Length, 15 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 8N58JAA GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 58 mm Stud Length, 15 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Another good feature is a smaller size ball diameter than the trunk of the threaded stud. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. As a result, the studs can be screwed into position from the ball side. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled.

 

JW Winco 10N74JAC GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M10 x 74 mm Stud Length 21 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 10N74JAC GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 74 mm Stud Length, 21 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 10N74JAC GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 74 mm Stud Length, 21 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. As a result, the studs can be screwed into position from the ball side. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled.

 

JW Winco 8N35JAD GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M8 x 35 mm Stud Length 25 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 8N35JAD GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 35 mm Stud Length, 25 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 8N35JAD GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M8 x 35 mm Stud Length, 25 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. As a result, the studs can be screwed into position from the ball side. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes.

 

JW Winco 12N74JAE GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M12 x 74 mm Stud Length 32 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 12N74JAE GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 74 mm Stud Length, 32 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 12N74JAE GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 74 mm Stud Length, 32 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. As a result, the studs can be screwed into position from the ball side. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled.

 

JW Winco 10N57JAC GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M10 x 57 mm Stud Length 21 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 10N57JAC GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 57 mm Stud Length, 21 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 10N57JAC GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M10 x 57 mm Stud Length, 21 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - As a result, the studs can be screwed into position from the ball side. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled.

 

JW Winco 25W780G32 GN631 Thrust Pad 25 mm Base Diameter Fits M10 x 15 Grub Screw Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 25W780G32 GN631 Thrust Pad, 25 mm Base Diameter, Fits M10 x 1.5 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 25W780G32 GN631 Thrust Pad, 25 mm Base Diameter, Fits M10 x 1.5 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 631 thrust pads, when used with gn 632. It is easy to press the ball point of the grub screw into the thrust pad by hand. 1 grub screws, are a low cost solution for clamping operations or for load bearing purposes. The resulting assembly leans to accommodate uneven surfaces.

 

JW Winco 25W940G32 GN631 Thrust Pad 25 mm Base Diameter Fits M12 x 175 Grub Screw Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 25W940G32 GN631 Thrust Pad, 25 mm Base Diameter, Fits M12 x 1.75 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 25W940G32 GN631 Thrust Pad, 25 mm Base Diameter, Fits M12 x 1.75 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM) - It is easy to press the ball point of the grub screw into the thrust pad by hand. Gn 631 thrust pads, when used with gn 632. The resulting assembly leans to accommodate uneven surfaces. 1 grub screws, are a low cost solution for clamping operations or for load bearing purposes.

 

JW Winco 20WGBK Disk GN338 0079 OD Gliding Cover Cap Technopolymer Plastic Polyacetal POM Steel Zinc Plated Disk Blue Passivated Natural White Color Rubber

J.W. Winco 20WGBK Disk, GN338, 0.0.79″ OD, Gliding Cover Cap, Technopolymer Plastic Polyacetal (POM), Steel Zinc Plated Disk, Blue Passivated, Natural White Color Rubber

J.W. Winco 20WGBK Disk, GN338, 0.0.79″ OD, Gliding Cover Cap, Technopolymer Plastic Polyacetal (POM), Steel Zinc Plated Disk, Blue Passivated, Natural White Color Rubber - These disks with cover caps are suitable for use as gliding or non-gliding feet on machinery. This type can also be used as a shroud to cover mounting screws for a more appealing, finished look.

 

JW Winco 12N74JAF GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M12 x 74 mm Stud Length 40 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 12N74JAF GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 74 mm Stud Length, 40 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 12N74JAF GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 74 mm Stud Length, 40 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. As a result, the studs can be screwed into position from the ball side.

 

JW Winco 6N36JAA GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M6 x 36 mm Stud Length 15 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 6N36JAA GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M6 x 36 mm Stud Length, 15 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 6N36JAA GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M6 x 36 mm Stud Length, 15 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. As a result, the studs can be screwed into position from the ball side. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. Another good feature is a smaller size ball diameter than the trunk of the threaded stud.

 

JW Winco 21W940G32 GN631 Thrust Pad 21 mm Base Diameter Fits M12 x 175 Grub Screw Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 21W940G32 GN631 Thrust Pad, 21 mm Base Diameter, Fits M12 x 1.75 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 21W940G32 GN631 Thrust Pad, 21 mm Base Diameter, Fits M12 x 1.75 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM) - It is easy to press the ball point of the grub screw into the thrust pad by hand. 1 grub screws, are a low cost solution for clamping operations or for load bearing purposes. The resulting assembly leans to accommodate uneven surfaces. Gn 631 thrust pads, when used with gn 632.

 

JW Winco 32WGBK Disk GN338 01026 OD Gliding Cover Cap Technopolymer Plastic Polyacetal POM Steel Zinc Plated Disk Blue Passivated Natural White Color Rubber

J.W. Winco 32WGBK Disk, GN338, 0.10.26″ OD, Gliding Cover Cap, Technopolymer Plastic Polyacetal (POM), Steel Zinc Plated Disk, Blue Passivated, Natural White Color Rubber

J.W. Winco 32WGBK Disk, GN338, 0.10.26″ OD, Gliding Cover Cap, Technopolymer Plastic Polyacetal (POM), Steel Zinc Plated Disk, Blue Passivated, Natural White Color Rubber - This type can also be used as a shroud to cover mounting screws for a more appealing, finished look. These disks with cover caps are suitable for use as gliding or non-gliding feet on machinery.

 

JW Winco 21W780G32 GN631 Thrust Pad 21 mm Base Diameter Fits M10 x 15 Grub Screw Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 21W780G32 GN631 Thrust Pad, 21 mm Base Diameter, Fits M10 x 1.5 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 21W780G32 GN631 Thrust Pad, 21 mm Base Diameter, Fits M10 x 1.5 Grub Screw, Matte Black Technopolymer Plastic (Polyacetal POM) - The resulting assembly leans to accommodate uneven surfaces. Gn 631 thrust pads, when used with gn 632. 1 grub screws, are a low cost solution for clamping operations or for load bearing purposes. It is easy to press the ball point of the grub screw into the thrust pad by hand.

 

JW Winco 12N57JAF GN638-NI Grub Screw and Thrust Pad Assembly European Standard No 14305 American Standard 303 Grub Screw M12 x 57 mm Stud Length 40 mm Pad Outside Diameter Stainless Steel Matte Black Technopolymer Plastic Polyacetal POM

J.W. Winco 12N57JAF GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 57 mm Stud Length, 40 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM)

J.W. Winco 12N57JAF GN638-NI Grub Screw and Thrust Pad Assembly, European Standard No. 1.4305 (American Standard 303) Grub Screw, M12 x 57 mm Stud Length, 40 mm Pad Outside Diameter, Stainless Steel, Matte Black Technopolymer Plastic (Polyacetal POM) - Gn 638 grub screw and thrust pad assemblies are a low cost solution for clamping operations or for load bearing purposes. Another good feature is a smaller size ball diameter than the trunk of the threaded stud. The thrust pad can easily be hammered onto the ball end of the screw, and also easily dismantled. As a result, the studs can be screwed into position from the ball side.