22 Best Screw Pin Anchor Shackles

 

Crosby 1018393 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 34 Ton Working Load Limit 516 Size

Crosby 1018393 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 3/4 Ton Working Load Limit, 5/16″ Size

Crosby 1018393 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 3/4 Ton Working Load Limit, 5/16″ Size - Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. Shackle finish is hot dip galvanized. The working load limit is 3/4 ton. Shackles are forged quenched and tempered with alloy pins.

 

Crosby 1018428 Carbon Steel S-209 Screw Pin Anchor Shackle Self-Colored 1 Ton Working Load Limit 38 Size

Crosby 1018428 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 1 Ton Working Load Limit, 3/8″ Size

Crosby 1018428 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 1 Ton Working Load Limit, 3/8″ Size - Shackle finish is self-colored. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. The working load limit is 1. Shackles are forged quenched and tempered with alloy pins. 00 ton.

 

Crosby 1018464 Carbon Steel S-209 Screw Pin Anchor Shackle Self-Colored 2 Ton Working Load Limit 12 Size

Crosby 1018464 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 2 Ton Working Load Limit, 1/2″ Size

Crosby 1018464 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 2 Ton Working Load Limit, 1/2″ Size - The working load limit is 2. Shackle finish is self-colored. Shackles are forged quenched and tempered with alloy pins. 00 ton. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications.

 

Crosby 1018384 Carbon Steel S-209 Screw Pin Anchor Shackle Self-Colored 12 Ton Working Load Limit 14 Size

Crosby 1018384 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 1/2 Ton Working Load Limit, 1/4″ Size

Crosby 1018384 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 1/2 Ton Working Load Limit, 1/4″ Size - Shackle finish is self-colored. Shackles are forged quenched and tempered with alloy pins. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. The working load limit is 1/2 ton.

 

Crosby 1018419 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 1 Ton Working Load Limit 38 Size

Crosby 1018419 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 1 Ton Working Load Limit, 3/8″ Size

Crosby 1018419 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 1 Ton Working Load Limit, 3/8″ Size - Shackle finish is hot dip galvanized. Shackles are forged quenched and tempered with alloy pins. 00 ton. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. The working load limit is 1.

 

All Material Handling 39SPASHDG Classic Screw Pin Anchor Shackle Galvanized 37257 Size 17 Tons Grey

All Material Handling 39SPASHDG Classic Screw Pin Anchor Shackle, Galvanized, 37257″ Size, 17 Tons, Grey

All Material Handling 39SPASHDG Classic Screw Pin Anchor Shackle, Galvanized, 37257″ Size, 17 Tons, Grey - Grey color. The 39spashdg is a 17 ton rated 1-1/2 inch size screw pin anchor shackle.

 

Crosby 1018473 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 3-14 Ton Working Load Limit 58 Size

Crosby 1018473 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 3-1/4 Ton Working Load Limit, 5/8″ Size

Crosby 1018473 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 3-1/4 Ton Working Load Limit, 5/8″ Size - Shackle finish is hot dip galvanized. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. Shackles are forged quenched and tempered with alloy pins. The working load limit is 3-1/4 ton.

 

Campbell T9641235 Screw Pin Anchor Shackle Forged Steel Galvanized 34 Trade 4-34 ton Working Load Limit

Campbell T9641235 Screw Pin Anchor Shackle, Forged Steel, Galvanized, 3/4″ Trade, 4-3/4 ton Working Load Limit

Campbell T9641235 Screw Pin Anchor Shackle, Forged Steel, Galvanized, 3/4″ Trade, 4-3/4 ton Working Load Limit - The product is highly durable. The product is good to use. Manufactured in china.

 

Crosby 1018516 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 6-12 Ton Working Load Limit 78 Size

Crosby 1018516 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 6-1/2 Ton Working Load Limit, 7/8″ Size

Crosby 1018516 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 6-1/2 Ton Working Load Limit, 7/8″ Size - The working load limit is 6-1/2 ton. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. Shackle finish is hot dip galvanized. Shackles are forged quenched and tempered with alloy pins.

 

Crosby 1018570 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 12 Ton Working Load Limit 1-14 Size

Crosby 1018570 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 12 Ton Working Load Limit, 1-1/4″ Size

Crosby 1018570 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 12 Ton Working Load Limit, 1-1/4″ Size - Shackle finish is hot dip galvanized. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. Shackles are forged quenched and tempered with alloy pins. The working load limit is 12. 00 ton.

 

Chicago Hardware  20010 3  Carbon Screw Pin Anchor Shackle Self-Colored 1000 lb Working Load Limit 14 Diameter

Chicago Hardware 20010 3 Carbon Screw Pin Anchor Shackle, Self-Colored, 1,000 lb. Working Load Limit, 1/4″ Diameter

Chicago Hardware 20010 3 Carbon Screw Pin Anchor Shackle, Self-Colored, 1,000 lb. Working Load Limit, 1/4″ Diameter - Size, wll and trademark are permanently marked on all shackles. 14. Shackles meet performance requirements of spec. Weight is 0. Wll 1,000 lbs. Made in u. Chicago hardware’s 1/4″ dropped forged screw pin anchor shackle is self-colored and has a working load limit of 1,000 lbs. Loads are based on a safety factor of 61. S. P/n is 20010 3. A. Shackles and pins are heat treated. Rr-c-271f type iva, class 2.

 

Crosby 1018534 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 8-12 Ton Working Load Limit 1 Size

Crosby 1018534 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 8-1/2 Ton Working Load Limit, 1″ Size

Crosby 1018534 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 8-1/2 Ton Working Load Limit, 1″ Size - Shackles are forged quenched and tempered with alloy pins. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. The working load limit is 8-1/2 ton. Shackle finish is hot dip galvanized.

 

34 in 4-34 ton Van Beest Green Pin Screw Pin Anchor Shackle

3/4 in., 4-3/4 ton, Van Beest Green Pin Screw Pin Anchor Shackle

3/4 in., 4-3/4 ton, Van Beest Green Pin Screw Pin Anchor Shackle - Forged-quenched & tempered with alloy pins. Can be used in tie down, towing, suspension or lifting applications. Carbon anchor shackle. Hot dip galvanized. G-209 screw pin.

 

Indusco 75100191 Hot Dipped Drop Forged Galvanized Steel Screw Pin Anchor Shackle 17000 lbs Working Load Limit 1 Size

Indusco 75100191 Hot Dipped Drop Forged Galvanized Steel Screw Pin Anchor Shackle, 17000 lbs Working Load Limit, 1″ Size

Indusco 75100191 Hot Dipped Drop Forged Galvanized Steel Screw Pin Anchor Shackle, 17000 lbs Working Load Limit, 1″ Size - 3-3/4-inches inside length. 38-inches outside diameter of eye. 1. 13-inches pin diameter. 17000 pounds working load limit. Working load limit is based on a design factor of 51. Screw pin shackles should not be used if there will be movement on the pin. Always stand clear of loads being lifted. Do not use round pin shackles in rigging applications. Shackles must always be inspected for wear, distortion and damage before use. Movement could cause the pin to unscrew and drop the load. 2. 2-1/2-inches width at bow. 1. Meets design requirements of federal specification rr-c-271 type iv a grade a class 2. 1-inches nominal shackle size. 69-inches inside width at pin. Indusco hot dipped drop forged galvanized steel screw pin anchor shackle. If the pin or bow is worn, distorted or damaged, discard the shackle.

 

Crosby G209A 20T A Screw Pin Anchor Shackle 38 1017450

Crosby G209A 2.0T A Screw Pin Anchor Shackle 3/8″ (1017450)

Crosby G209A 2.0T A Screw Pin Anchor Shackle 3/8″ (1017450) - Charges for proof testing and certification available when requested at the time of order. • Meets or exceeds all requirements of asme b30 26 including identification, ductility, design factor, proof load and temperature requirements. • Working load limit permanently shown on every shackle. • forged alloy steel � quenched and tempered, with alloy pins. • Shackles can be furnished proof tested with certificates to designated standards, such as abs, dnv, lloyds, or other certification. Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by asme b30 26. • Hot dip galvanized. • Capacities 2 thru 21 metric tons. Meets performance requirements of grade 8 shackles. • Approved for use at -40 degree c (-40 degree f) to 204 degree c (400 degree f).

 

1 Screw Pin Anchor Shackle Galvinized

1″ Screw Pin Anchor Shackle Galvinized

1″ Screw Pin Anchor Shackle Galvinized - Meet or exceed all manufacturing requirements of asme b3026. Alloy shackles meet all requirements for ce compliance. Drop forged for superior strength and performance. Working load limit permanently shown on every shackle. 51 design factor.

 

Chicago Hardware  20125 4  Carbon Screw Pin Anchor Shackle Galvanized 3000 lb Working Load Limit 716 Diameter

Chicago Hardware 20125 4 Carbon Screw Pin Anchor Shackle, Galvanized, 3,000 lb. Working Load Limit, 7/16″ Diameter

Chicago Hardware 20125 4 Carbon Screw Pin Anchor Shackle, Galvanized, 3,000 lb. Working Load Limit, 7/16″ Diameter - Wll 3,000 lbs. Shackles and pins are heat treated. Chicago hardware’s 7/16″ dropped forged screw pin anchor shackle is galvanized and has a working load limit of 3,000 lbs. A. Made in u. Weight is 0. P/n is 20125 4. Loads are based on a safety factor of 61. Rr-c-271f type iva, class 2. 54. Size, wll and trademark are permanently marked on all shackles. S. Shackles meet performance requirements of spec.

 

1 Galvanized Steel Screw Pin Anchor Shackle - 850 Ton – 2 Pack

1″ Galvanized Steel Screw Pin Anchor Shackle – 8.50 Ton – 2 Pack

1″ Galvanized Steel Screw Pin Anchor Shackle – 8.50 Ton – 2 Pack - Made of galvanized steel, the anchor shackle is a tough and durable accessory for nylon slings, as well as polyester slings. This shackle can be used in many applications such as industrial, agricultural and marine applications. 5 ton working load limit with a 1 inch diameter. Paired with a lifting sling, they help protect the eyes of your sling from wear and tear on clevis hooks. This galvanized screw pin anchor shackle has an 8.

 

Crosby 1018491 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 4-34 Ton Working Load Limit 34 Size

Crosby 1018491 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 4-3/4 Ton Working Load Limit, 3/4″ Size

Crosby 1018491 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 4-3/4 Ton Working Load Limit, 3/4″ Size - Shackles are forged quenched and tempered with alloy pins. Shackle finish is hot dip galvanized. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. The working load limit is 4-3/4 ton.

 

Crosby 1018507 Carbon Steel S-209 Screw Pin Anchor Shackle Self-Colored 4-34 Ton Working Load Limit 34 Size

Crosby 1018507 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 4-3/4 Ton Working Load Limit, 3/4″ Size

Crosby 1018507 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 4-3/4 Ton Working Load Limit, 3/4″ Size - The working load limit is 4-3/4 ton. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. Shackle finish is self-colored. Shackles are forged quenched and tempered with alloy pins.

 

Crosby 1018357 Carbon Steel G-209 Screw Pin Anchor Shackle Galvanized 13 Ton Working Load Limit 316 Size

Crosby 1018357 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 1/3 Ton Working Load Limit, 3/16″ Size

Crosby 1018357 Carbon Steel G-209 Screw Pin Anchor Shackle, Galvanized, 1/3 Ton Working Load Limit, 3/16″ Size - Shackle finish is hot dip galvanized. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications. The working load limit is 1/3 ton. Shackles are forged quenched and tempered with alloy pins.

 

Crosby 1018561 Carbon Steel S-209 Screw Pin Anchor Shackle Self-Colored 9-12 Ton Working Load Limit 1-18 Size

Crosby 1018561 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 9-1/2 Ton Working Load Limit, 1-1/8″ Size

Crosby 1018561 Carbon Steel S-209 Screw Pin Anchor Shackle, Self-Colored, 9-1/2 Ton Working Load Limit, 1-1/8″ Size - The working load limit is 9-1/2 ton. Shackle finish is self-colored. Shackles are forged quenched and tempered with alloy pins. Crosby’s screw pin anchor shackles can be used in tie down, towing, suspension or lifting applications.