22 Best Self Clinching Pins

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-160-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-160-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-160-6 - The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Flush-head for sheet thickness of. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. 040″ and greater. They are also available unthreaded on special order.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-173-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-173-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-173-8 - Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Flush-head for sheet thickness of. They are also available unthreaded on special order. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. The squeezing action embeds the head of the stud into the sheet. 040″ and greater.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-073-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-073-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-073-4 - Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Flush-head for sheet thickness of. 040″ and greater. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. They are also available unthreaded on special order. The squeezing action embeds the head of the stud into the sheet.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-207-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-207-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-207-6 - Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. 040″ and greater. They are also available unthreaded on special order. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. Flush-head for sheet thickness of. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-084-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-084-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-084-8 - 040″ and greater. The squeezing action embeds the head of the stud into the sheet. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Flush-head for sheet thickness of. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. They are also available unthreaded on special order. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-116-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-116-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-116-8 - Flush-head for sheet thickness of. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. They are also available unthreaded on special order. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. 040″ and greater. Fh (flush-head) studs are available in aluminum, steel, or stainless steel.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-106-5

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-106-5

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-106-5 - 040″ and greater. They are also available unthreaded on special order. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. The squeezing action embeds the head of the stud into the sheet. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Flush-head for sheet thickness of. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-094-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-094-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-094-4 - 040″ and greater. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Flush-head for sheet thickness of. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. They are also available unthreaded on special order. The squeezing action embeds the head of the stud into the sheet. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-106-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-106-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-106-4 - The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The squeezing action embeds the head of the stud into the sheet. 040″ and greater. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Flush-head for sheet thickness of. They are also available unthreaded on special order. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-103-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-103-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-103-8 - 040″ and greater. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. The squeezing action embeds the head of the stud into the sheet. Flush-head for sheet thickness of. They are also available unthreaded on special order.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-116-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-116-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-116-4 - Fh (flush-head) studs are available in aluminum, steel, or stainless steel. 040″ and greater. They are also available unthreaded on special order. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. The squeezing action embeds the head of the stud into the sheet. Flush-head for sheet thickness of. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-160-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-160-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-160-8 - They are also available unthreaded on special order. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. The squeezing action embeds the head of the stud into the sheet. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. 040″ and greater. Flush-head for sheet thickness of. Fh (flush-head) studs are available in aluminum, steel, or stainless steel.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-094-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-094-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-094-6 - Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. 040″ and greater. Flush-head for sheet thickness of. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. They are also available unthreaded on special order.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-223-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-223-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-223-8 - The squeezing action embeds the head of the stud into the sheet. They are also available unthreaded on special order. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. 040″ and greater. Flush-head for sheet thickness of. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-084-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-084-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-084-6 - They are also available unthreaded on special order. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. 040″ and greater. Flush-head for sheet thickness of.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Metric FHS-3MM-15

Pem Self-Clinching Pins – Type FH/FHS/FHA – Metric, FHS-3MM-15

Pem Self-Clinching Pins – Type FH/FHS/FHA – Metric, FHS-3MM-15 - Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. 00 mm and greater. The squeezing action embeds the head of the stud into the sheet. Flush-head for sheet thickness of 1. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. They are also available unthreaded on special order.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-137-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-137-6

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-137-6 - They are also available unthreaded on special order. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Flush-head for sheet thickness of. 040″ and greater. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The squeezing action embeds the head of the stud into the sheet. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-141-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-141-8

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-141-8 - The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. They are also available unthreaded on special order. Flush-head for sheet thickness of. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. 040″ and greater. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. The squeezing action embeds the head of the stud into the sheet.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-173-10

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-173-10

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-173-10 - 040″ and greater. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Flush-head for sheet thickness of. They are also available unthreaded on special order. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The squeezing action embeds the head of the stud into the sheet.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-141-12

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-141-12

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-141-12 - Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. They are also available unthreaded on special order. 040″ and greater. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Flush-head for sheet thickness of. The squeezing action embeds the head of the stud into the sheet.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-084-5

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-084-5

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-084-5 - The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Flush-head for sheet thickness of. The squeezing action embeds the head of the stud into the sheet. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. 040″ and greater. Fh (flush-head) studs are available in aluminum, steel, or stainless steel. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. They are also available unthreaded on special order.

 

Pem Self-Clinching Pins - Type FHFHSFHA - Unified FHS-120-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-120-4

Pem Self-Clinching Pins – Type FH/FHS/FHA – Unified, FHS-120-4 - They are also available unthreaded on special order. The squeezing action embeds the head of the stud into the sheet. 040″ and greater. Type fh is recommended for use in steel or aluminum sheets hrb (rockwell “b” scale) 80 or less and hb (hardness brinell) 150 or less. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove, creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. Flush-head for sheet thickness of. Pem® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. Fh (flush-head) studs are available in aluminum, steel, or stainless steel.