22 Top Aircraft Tool Supplies

 

Aircraft Tool Supply Aircraft Timing Indicator

Aircraft Tool Supply Aircraft Timing Indicator

Aircraft Tool Supply Aircraft Timing Indicator - Easily attached to the propeller spinner, it is accurate to within 1/2 degree. Has easy to read dial and comes with top dead center locator and mounting bands. This all aluminum unit is designed to improve and speed up the process of timing magnetos to the engine. Outer diameter 4-7/8″ inside diameter 3-5/8″.

 

Aircraft Tool Supply Safety Wire Drill Guide

Aircraft Tool Supply Safety Wire Drill Guide

Aircraft Tool Supply Safety Wire Drill Guide - Works with all hex head, allen head, and cap head bolts from size 3/16″ to 5/8″. This tool provides a fast and simple way to drill safety wire holes in the head as well as the body of an bolts, and studs. Made from anodized 6061-t6 aluminum for durability. Includes holder, drill bushings (2), and 1/16″ drill bits (2).

 

Aircraft Tool Supply Rivet Fan Spacer Mini

Aircraft Tool Supply Rivet Fan Spacer (Mini)

Aircraft Tool Supply Rivet Fan Spacer (Mini) - It just doesn’t get any easier than this, folks. The clever accordion action of the fan spacer allows you to set up rivet holes with deadly accuracy. Miniature version of the fan spacing tool (p/n fs01). Simply expand or contract the tool to get the spacing you’re looking for and start laying out your holes. This tool is just what you need for lining up those rivet holes.

 

Aircraft Tool Supply Strut Pump Coupler

Aircraft Tool Supply Strut Pump Coupler

Aircraft Tool Supply Strut Pump Coupler - Replacement strut coupler (for 675 strut pump).

 

Aircraft Tool Supply Safety Wire Drill Guide Nut Safblock

Aircraft Tool Supply Safety Wire Drill Guide (Nut Safblock)

Aircraft Tool Supply Safety Wire Drill Guide (Nut Safblock) - Special design enables you to drill safety wire holes through the head of bolts or through nuts, across the diagonal. Easy to use, just place the bolt head into the “v” groove, tighten the holding screw, drill and deburr. Accepts up to 3/4 inch diameter nuts and bolts. Drills 1/16 hole. Made in the usa.

 

Aircraft Tool Supply Ats Spark Plug Gap Gauge

Aircraft Tool Supply Ats Spark Plug Gap Gauge

Aircraft Tool Supply Ats Spark Plug Gap Gauge - Slider design keep gauge wires stowed away when not in use. See ats450-wg”. 019″. 018″ and. Convenient gap gauge for all champion and autolite massive electrode spark plugs. Retractable slider design” includes wires for. 015″. 022″” works with all champion and autolite massive electrode spark plugs” replacement wire gauges are available.

 

Aircraft Tool Supply Ats 17 Piece Micro Die Grinder Kit

Aircraft Tool Supply Ats 17 Piece Micro Die Grinder Kit

Aircraft Tool Supply Ats 17 Piece Micro Die Grinder Kit - A complete rear exhaust micro die grinder kit featuring a powerful die grinder and a collection of stones in various shapes and sizes. 2 kg) weight, rear exhaust. Also included in the kit are 1, mini oiler 10, mounted grinding stones (1/8″ shank) 1, set of spanners (wrenches) 1, 1/4″ air connectorr micro die grinder specifications 54,000 rpm free speed, 1/8″ (3mm) collet size, 5-3/8″ (137mm) overall length,. 44 lbs (.

 

Aircraft Tool Supply Squeezer Set Mix 6 Pieces 18

Aircraft Tool Supply Squeezer Set Mix (6 Pieces) 1/8″

Aircraft Tool Supply Squeezer Set Mix (6 Pieces) 1/8″ - 1/8″ body length. Standard 187 shank. Includes 3/32″, 1/8″, 5/32″, and 3/16″ universal head sets plus 2 flush sets.

 

Aircraft Tool Supply Speed Deburring Tool 8

Aircraft Tool Supply Speed Deburring Tool (8″)

Aircraft Tool Supply Speed Deburring Tool (8″) - 100 degree deburring angle. Deburrs holes fast & easy with speed handle. New dogleg design. 3/8″ diameter. 8″ overall length. Replacement tip is p/n sp375-1.

 

Aircraft Tool Supply Automatic Wire Stripper

Aircraft Tool Supply Automatic Wire Stripper

Aircraft Tool Supply Automatic Wire Stripper - This is the classic style wire stripper that was in every military electronic technician’s toolbox. Constructed of die cast aluminum for durability. “Snip-n-strip” action first cuts the insulation and then strips it from the wire just enough for you to twist the braids in place before crimping or soldering. Cleanly removes insulation from wires in sizes awg-22, 16, 14, 12, 10, and 8.

 

Aircraft Tool Supply Threaded Drill Bits 40 30 21 12 4-Pack

Aircraft Tool Supply Threaded Drill Bits #40, #30, #21, #12 (4-Pack)

Aircraft Tool Supply Threaded Drill Bits #40, #30, #21, #12 (4-Pack) - Cobalt steel with black oxide finish. Package of four (4) 1/4-28 threaded drill bits in sizes #40, #30, #21, and #12.

 

Aircraft Tool Supply Spark Plug Gapper And Gap Gauge

Aircraft Tool Supply Spark Plug Gapper And Gap Gauge

Aircraft Tool Supply Spark Plug Gapper And Gap Gauge - A low-cost efficent gap setting tool for closing gaps on massive-electrode aviation spark plugs. Great design allows it to clamp on to your workbench for easy gapping. Manufacturued from 4160 tool grade steel” cnc machined surfaces for exact alignment” includes ats450 feeler gauge” clamps to workbench for easy one-handed operation” compatible with all champion and autolite massive electrode spark plugs”.

 

Aircraft Tool Supply Spark Plug Vibrator Cleaner

Aircraft Tool Supply Spark Plug Vibrator Cleaner

Aircraft Tool Supply Spark Plug Vibrator Cleaner - If you clean a lot of spark plugs, then you know that a vibrator cleaner is the only way to remove stubborn lead deposits. It will clean heavy deposits in and around the electrodes with absolutely no risk of damage to the plug. This tool will do the same job as the more expensive vibrator cleaners at a fraction of the cost.

 

Aircraft Tool Supply Rivet Cutter

Aircraft Tool Supply Rivet Cutter

Aircraft Tool Supply Rivet Cutter - Cuts from 3/32 to 1/4 diameter rivets. Cuts same length every time with use of leaf spacers.

 

Aircraft Tool Supply Camloc Snap Ring Installation Tool 4002 Series

Aircraft Tool Supply Camloc Snap Ring Installation Tool (4002 Series)

Aircraft Tool Supply Camloc Snap Ring Installation Tool (4002 Series) - The rubber tip feels comfortable in the palm of your hand and prevents fatigue when installing large quantities of grommets. Precision cnc machined from carbon steel to very close tolerances to eliminate the possibility of the snap ring jamming in the handle. The conical insert spreads the ring while the tube handle pushes it on to the grommet. Zinc plated for long life. This is used to install snap rings on the backside of all camloc (c-lock) 4002 series grommets.

 

Aircraft Tool Supply Aviation Laboratories Engine Oil Analysis Kit

Aircraft Tool Supply Aviation Laboratories Engine Oil Analysis Kit

Aircraft Tool Supply Aviation Laboratories Engine Oil Analysis Kit - That is, of course, to carefully cut open your oil filter and visually check the media for metal particles. A huge database of wear characteristics for every engine model, and a highly experienced staff allows aviation laboratories to give you accurate interpretive guidelines. But there is a simple test you can perform on a regular basis to ensure that your engine is functioning correctly. The most common cause of engine failure is due to excessive wear or metal fatigue. But the fact is, the most telling sign of impending engine failure comes from microscopic particles that cannot be seen with the naked eye. Complete kit includes sample bottle, siphon hose, comprehensive analysis with online results, and full instructions. Simply fill the supplied sample bottle with oil and mail it in for analysis aviation laboratories will analyze 12 wear metal elements for piston and turbine engines, and post the results online for your private review. Recommended or authorized by most engine manufacturers. Aviation laboratories test kit determines the condition of oil wetted engine parts even on the first sample. The analysis is usually completed within 24 hours, and if they detect an abnormal condition, they will contact you immediately to alert you to potential engine problems. That s why you should have a lab do an oil check.

 

Aircraft Tool Supply Ats Economy Rivet Gun

Aircraft Tool Supply Ats Economy Rivet Gun

Aircraft Tool Supply Ats Economy Rivet Gun - 401 shank. The next generation of our best-selling 2602 economy rivet gun is 6 ounces lighter, better balanced, and now features the same feather-light throttle as many of the more expensive x-guns. It s so controllable you can safely drive a 3/32″ rivet, yet it delivers the same power as a standard 3x rivet gun. , 3cfm at 90 psi,. 2 lbs. 0-2600 bpm, weight 3. The 2602 has been recommended for use in many kits by their manufacturers such as the rv s, thorp t-18, and the midget mustang. Also, we ve engineered the new 2602a with your safety in mind by adding an ergonomic, vibration-reducing rubber grip that significantly reduces the hand-numbing effects of vibration shock.

 

Aircraft Tool Supply Screw Bolt Remover Kit 10

Aircraft Tool Supply Screw & Bolt Remover Kit (10″)

Aircraft Tool Supply Screw & Bolt Remover Kit (10″) - 401 parker taper shank. Fits all rivet guns with a. 10″ long. Accepts 3/8″ square drive sockets and tooling. Complete kit includes screw knocker, 1/4″ hex bit adapter, plus an assortment of four 1/4″ hex bits. Also called a “screw knocker”, “woodpecker”, or “nut buster”, this tool is used to remove screws, bolts, nuts, etc. That are corroded or cannot be loosened by conventional methods. Drop forged from tool grade steel and hardened to 45 rockwell.

 

Aircraft Tool Supply Cleco Pack 25 Pieces 332

Aircraft Tool Supply Cleco Pack, 25 Pieces 3/32″

Aircraft Tool Supply Cleco Pack, 25 Pieces 3/32″ - A package of 25 pieces 3/32″ (silver) kiwk-lok clecos.

 

Aircraft Tool Supply Ats Professional Riveting Kit 3X

Aircraft Tool Supply Ats Professional Riveting Kit (3X)

Aircraft Tool Supply Ats Professional Riveting Kit (3X) - This is the prefect “field” kit to take with you anywhere — it has the riveting tools you need conveniently laid out in one handy ready-to-go package. Our new professional riveting kit has all the tools you need to drive rivets like a pro. It contains our best-selling ats pro series 3x rivet gun, a selection 4 of our most popular bucking bars (141, 142, 148, and 149), plus a complete assortment of rivet sets to install universal head (an470) or flush (an426) rivets in sizes 3/32″ to 3/16″. The ats professional riveting kit is a part of our ats-pro series, so you can rest assured that your tool investment will be well protected by our unconditional 30 day money back guarantee, and industry-leading ats pro lifetime warranty. And it all comes to you in a stylish molded case to keep things neatly organized.

 

Aircraft Tool Supply Ats Economy Spark Plug Gapping Kit

Aircraft Tool Supply Ats Economy Spark Plug Gapping Kit

Aircraft Tool Supply Ats Economy Spark Plug Gapping Kit - Combines our popular 116 spark plug gapper with our new ats450 spark plug gauge in one money-saving kit.

 

Aircraft Tool Supply Right Angle Drill Attachment

Aircraft Tool Supply Right Angle Drill Attachment

Aircraft Tool Supply Right Angle Drill Attachment - Heavy-duty economical drill attachment. Has 1/4×28 internal thread for use with standard threaded drill bits or miniature chucks. 7″ overall length. Head height 1″. Accepts 1/4″-28 threaded bits. 3/8″ side to center. 1/4″ capacity.