22 Top Cb Drills

 

MAFORD 30022800 1 Carbide Cb Drill

M.A.FORD 30022800 #1 Carbide Cb Drill

M.A.FORD 30022800 #1 Carbide Cb Drill - 30577 series 300 1twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30017700 16 Carbide Cb Drill

M.A.FORD 30017700 #16 Carbide Cb Drill

M.A.FORD 30017700 #16 Carbide Cb Drill - 30505 series 300 16twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30003200 67 Carbide Cb Drill

M.A.FORD 30003200 #67 Carbide Cb Drill

M.A.FORD 30003200 #67 Carbide Cb Drill - 30089 series 300 67twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30009350 42 Carbide Cb Drill

M.A.FORD 30009350 #42 Carbide Cb Drill

M.A.FORD 30009350 #42 Carbide Cb Drill - 30325 series 300 42twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

All American Type P bushing 8 ID x 1332 OD x 1-34 L CB Drill Bushing C1144 Steel Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, #8 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, #8 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA - R max for any other size. I. All american drill bushing are made in the usa from steel obtained from a domestic steel foundry. All of our products are free of conflict materials of any kind and conform to reach. I. 0005 t. Concentricity is held at 0 to. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. R maximum for id sizes of 1/8 to ½ and 0 to. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. 0003 t.

 

MAFORD 30014400 27 Carbide Cb Drill

M.A.FORD 30014400 #27 Carbide Cb Drill

M.A.FORD 30014400 #27 Carbide Cb Drill - 30453 series 300 27twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30018000 15 Carbide Cb Drill

M.A.FORD 30018000 #15 Carbide Cb Drill

M.A.FORD 30018000 #15 Carbide Cb Drill - 30509 series 300 15twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30003600 64 Carbide Cb Drill

M.A.FORD 30003600 #64 Carbide Cb Drill

M.A.FORD 30003600 #64 Carbide Cb Drill - Ma ford #64 dia 1-1/2″ oal bright carbide circuit board drill.

 

MAFORD 30011300 33 Carbide Cb Drill

M.A.FORD 30011300 #33 Carbide Cb Drill

M.A.FORD 30011300 #33 Carbide Cb Drill - 30405 series 300 33twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

All American Type P bushing 4 ID x 1332 OD x 1-34 L CB Drill Bushing C1144 Steel Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, #4 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, #4 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA - Concentricity is held at 0 to. I. R maximum for id sizes of 1/8 to ½ and 0 to. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. I. 0003 t. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. All of our products are free of conflict materials of any kind and conform to reach. R max for any other size. All american drill bushing are made in the usa from steel obtained from a domestic steel foundry. 0005 t.

 

MAFORD 30001450 79 Carbide Cb Drill

M.A.FORD 30001450 #79 Carbide Cb Drill

M.A.FORD 30001450 #79 Carbide Cb Drill - 30005 series 300 79twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30001600 78 Carbide Cb Drill

M.A.FORD 30001600 #78 Carbide Cb Drill

M.A.FORD 30001600 #78 Carbide Cb Drill - 30013 series 300 78twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30004200 58 Carbide Cb Drill

M.A.FORD 30004200 #58 Carbide Cb Drill

M.A.FORD 30004200 #58 Carbide Cb Drill - 30145 series 300 58twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30020400 6 Carbide Cb Drill

M.A.FORD 30020400 #6 Carbide Cb Drill

M.A.FORD 30020400 #6 Carbide Cb Drill - 30553 series 300 6twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30020550 5 Carbide Cb Drill

M.A.FORD 30020550 #5 Carbide Cb Drill

M.A.FORD 30020550 #5 Carbide Cb Drill - 30557 series 300 5twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30016950 18 Carbide Cb Drill

M.A.FORD 30016950 #18 Carbide Cb Drill

M.A.FORD 30016950 #18 Carbide Cb Drill - 30493 series 300 18twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30018900 12 Carbide Cb Drill

M.A.FORD 30018900 #12 Carbide Cb Drill

M.A.FORD 30018900 #12 Carbide Cb Drill - 30525 series 300 12twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30021870 732 Carbide Cb Drill

M.A.FORD 30021870 7/32 Carbide Cb Drill

M.A.FORD 30021870 7/32 Carbide Cb Drill - 30569 series 300 7/32twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

MAFORD 30001560 164 Carbide Cb Drill

M.A.FORD 30001560 1/64 Carbide Cb Drill

M.A.FORD 30001560 1/64 Carbide Cb Drill - 30009 series 300 1/64twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

All American Type P bushing 3 ID x 1332 OD x 1-34 L CB Drill Bushing C1144 Steel Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, #3 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, #3 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA - 0003 t. I. Concentricity is held at 0 to. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. 0005 t. All american drill bushing are made in the usa from steel obtained from a domestic steel foundry. I. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. R max for any other size. All of our products are free of conflict materials of any kind and conform to reach. R maximum for id sizes of 1/8 to ½ and 0 to.

 

MAFORD 30014700 26 Carbide Cb Drill

M.A.FORD 30014700 #26 Carbide Cb Drill

M.A.FORD 30014700 #26 Carbide Cb Drill - 30457 series 300 26twister ua 5x straight shank 118° point 35° helix 1-1/2 loa drill.

 

All American Type P bushing 1564 ID x 1332 OD x 1-34 L CB Drill Bushing C1144 Steel Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, 15/64 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P bushing, 15/64 ID x 13/32 OD x 1-3/4″ L, CB Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA - 0005 t. I. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. All of our products are free of conflict materials of any kind and conform to reach. R maximum for id sizes of 1/8 to ½ and 0 to. 0003 t. R max for any other size. Concentricity is held at 0 to. I. All american drill bushing are made in the usa from steel obtained from a domestic steel foundry.