23 Best and Coolest 3D Printing Filaments

 

3D Printing Filament PLA 3mm 1KG spool black Dimentional Accuracy - 003mm

3D Printing Filament PLA 3mm 1KG spool (black), Dimentional Accuracy +/- 0.03mm

3D Printing Filament PLA 3mm 1KG spool (black), Dimentional Accuracy +/- 0.03mm - The processing temperature of this pla is 190°, 230° c. Pla is one of the most common materials used for 3d printing because of it’s accuracy, strength and has minimal warping or shrinking of your prints. This filament uses pla (polylactic acid), 1kg spool with a 3. It is a material that is a great choice for printing that requires flat areas or more accurate angles. 0mm diameter with an accuracy of +/-0. 03mm. Arraybay 3d printing filament means quality that is perfect for a variety of 3d printing project. Quality is important for 3d printing, our filaments have very low water absorption, no air bubbles occur when printing.

 

Taulman Nylon Bridge 3D Printing Filament - 175 mm

Taulman Nylon Bridge 3D Printing Filament – 1.75 mm

Taulman Nylon Bridge 3D Printing Filament – 1.75 mm - This formulation has been specifically created and tested for use in 3d printing. Made in the usa. 1lb of 175mm taulman bridge printer filament. This filament is called bridge because it brings the strength of nylon 645 together with the price of abs and pla.

 

Recreus 70AFCLEAR285500US 70A FILAFLEX 285 mm 3D Printing Filament 500 g 1 lb Transparent

Recreus 70AFCLEAR285500US 70A FILAFLEX 285 mm 3D Printing Filament, 500 g, 1 lb., Transparent

Recreus 70AFCLEAR285500US 70A FILAFLEX 285 mm 3D Printing Filament, 500 g, 1 lb., Transparent - Compatible only with direct extruders. Ultra-soft material. Combine it with pla or absand create new hybrid prints with new capabilities. Not heated bed, kapton, blue tape or hairspray needed. High elasticity, 900 percent stretching until breaking.

 

NinjaFlex TPU 3D Printing Filament - 175mm 50kg - MIDNIGHT

NinjaFlex TPU 3D Printing Filament – 1.75mm .50kg – MIDNIGHT

NinjaFlex TPU 3D Printing Filament – 1.75mm .50kg – MIDNIGHT - Ninjaflex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Made from a specially formulated thermoplastic polyurethane (tpu) material, this patented technology boasts a low-tack, easy-to-feed texture. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials. Sds & key features shore hardness = 85a truly flexible (no fill or layer manipulation required to achieve performance) 660% elongation allows for repeated movement and impact without wear or cracking  polyurethane composition allows for excellent vibration reduction patented low friction exterior allows for smooth feeding abrasion resistance 20% better than abs and 68% better than pla consistent diameter and material properties providing reliable, high quality prints chemical resistant to many materials, including naphtha, astm oils #1-3, petroleum and freon adheres to all standard build platforms without glue or tape reach and rohs 2002/95/ec directive compliant printing guidelines extruder temperature  225°c – 235°c platform temperature room temperature – 40°c glue and/ or blue painters tape is suggested if not using a heated bed. Suggested applications seals, gaskets, plugs, leveling feet, protective applications. Print speed  top and bottom layers 10-20 mm/ sec (600-1200 mm/ min) infill speeds 15-35 mm/ sec (900-2100 mm/ min) layer 2+ use cooling fan if available. The result is uniquely flexible, strong prints ideal for direct-drive extruders.

 

3D MARS Deep Blue PLA 175mm 3D Printing Filament3D Printer Filament 175mm PLADimensional Accuracy - 005mm12kg Spool175 mm PLA 3D Filament for Most 3D Printer 3D Printing Pen

3D MARS Deep Blue PLA 1.75mm ,3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen

3D MARS Deep Blue PLA 1.75mm ,3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen - Gross meter and weight dark blue 3d printer filament is 136kg(including spool, approximately 29 lbs) with 390 meters each. Better smell the air is filled with slightly sweet smell likes candy when printing. +/-005mm filament diameter tolerances175mm diameter length of filament’s tight tolerance to ensure consistent feeding and stable prints. 3d printer filament 175 eco-friendly deep bluefilament is suitable for high precision while printing. Compatibilitydeep bluefilament works well with makerbot, ultimaker, 3d pen, prusa i3 ect.

 

ABS Filaments Blue for 3D Printer-SUNLU ABS Filament 175 mmLow Odor Dimensional Accuracy - 002 mm 3D Printing Filament22 LBS 1KG Spool 3D Printer Filament for Most 3D Printers 3D PensBlue

ABS Filaments Blue for 3D Printer-SUNLU ABS Filament 1.75 mm,Low Odor Dimensional Accuracy +/- 0.02 mm 3D Printing Filament,2.2 LBS (1KG) Spool 3D Printer Filament for Most 3D Printers & 3D Pens,Blue

ABS Filaments Blue for 3D Printer-SUNLU ABS Filament 1.75 mm,Low Odor Dimensional Accuracy +/- 0.02 mm 3D Printing Filament,2.2 LBS (1KG) Spool 3D Printer Filament for Most 3D Printers & 3D Pens,Blue - ♥30-day money-back guarantee we are so confident in our 3d printer fialment that we offer a full 30-day guaranteebuy it,use it and if you aren’t happy with it,tell us and we’ll refund your money. ♥high compatible with your 3d printer whatever all 175 mm-specification 3d printers in the market are configured to run with the pla 3d printing filaments. ♥You’ll have zero hassle printing compared with traditional brittle pla, sunlu 3d printer filaments have adjusted the degradability of the material for optimal performance,so sunlu pla filaments are not brittle during 3d printing jobs. ♥Material abs, color blue, weight 1 kg (approximately 220 lbs) spool. ♥Abs recommend temperature extrusion/nozzle temperature 210°c, 240°c (410°f, 464°f), use with heated build platform is recommended.

 

3D Printing Filament - Red 175 mm PLA 3D Printer Filaments Dimensional Accuracy - 002 mm Low Odor Filament 22 lbs Spool PLA 3D Printer Filament for Most 3D Printer 3D Pen

3D Printing Filament – Red 1.75 mm PLA 3D Printer Filaments, Dimensional Accuracy +/- 0.02 mm Low Odor Filament, 2.2 lbs Spool PLA 3D Printer Filament for Most 3D Printer & 3D Pen

3D Printing Filament – Red 1.75 mm PLA 3D Printer Filaments, Dimensional Accuracy +/- 0.02 mm Low Odor Filament, 2.2 lbs Spool PLA 3D Printer Filament for Most 3D Printer & 3D Pen - 175mm pla filament pla is useful in a broad range of printing applications, has the advantage of low-odor and low-warp, and usually does not require a heated bed compared with traditional brittle pla, worksteel 3d printer filament has adjusted the degradability of the material for optimal performance, and our 175 mm pla filament is not brittle during a 3d printing job. Vacuumed packed some 3d printing materials can be negatively affected by moisture, that’s why worksteel 3d printer filament made by us is vacuumed sealed along with a desiccant pack this will enable you to easily keep your 3d printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging. +/-002mm tolerance worksteel pla 3d printer filament is produced with more precise specification and has a tolerance of +/- 002 mm regardless of the 3d printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle almost all printers on the market are configured to run with our worksteel pla 3d printing filament. Compliant & certified our 3d printer filaments comply with the restriction of hazardous substance (rohs) directive and are free from potentially hazardous substances this 175 mm pla filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. 100% satisfaction guarantee we offer great 3d printer filament and best customer service, backed by worksteel 90 days money back guarantee with 2-year warranty seize the chance to click “add to cart” button right now.

 

CCTREE 285mm 3mm PLA 3D Printing Filament Material Accuracy - 005mm 1kg Spool 22lbs Red

CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Red

CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Red - Print temperature 190, 220°c, depending on printer model. 285mm diameter, 1kg net weight, pla filament. Compatible with makerbot,up,afinia,leapfrog creatr, builder,reprap,felix, ultimaker and any other fdm 3d printers. Pla (polylactic acid) 3d printing filament vacuumed sealed with desiccant. Spool sizediameter 200mm + inner hub 55mm.

 

Rainbow Pack Full Size 175MM PLA 3D Printing Filament

Rainbow Pack Full Size 1.75MM PLA 3D Printing Filament

Rainbow Pack Full Size 1.75MM PLA 3D Printing Filament - 175mm pla made from bio-degradable high grade virgin plastic with strict controls to match pantone color number system for vivid, consistent colors. Tight tolerance controlled standards for diameter (+/- 00079mm = 1 std deviation) and roundness (+/- 00141mm = 1 std deviation). Spool dimensions 7875″ diameter x 275″ wide x 375 inner diameter with a 20″ spool hub diameter. Recommended extrusion/nozzle temperature 190°c, 230°c (374°f, 446°f) and does not require a heated print bed. 8, 1kg (22 pounds) if filament on spool, sealed in bag with desiccate (1 each of red, orange, yellow, green, blue, purple, black, white).

 

Hackka 175mm 1KG Wood PLA 3D Printing Filament

Hackka 1.75mm 1KG Wood PLA 3D Printing Filament

Hackka 1.75mm 1KG Wood PLA 3D Printing Filament - Printing temperature 200-230 degree celsius 215 degree celsius recommended. Wood colored and textured pla filament this filament is ideal for printing wood-looking parts for rc and other hobbies. Compatible with all 3d printers. This filament does not contain real wood only imitates the look and feel of wood.

 

3D Printer Filament PLA White-PLA Filament 175 mm SUNLULow Odor Dimensional Accuracy - 002 mm 3D Printing Filament22 LBS 1KG Spool 3D Printer Filament for 3D Printers 3D PensWhite

3D Printer Filament PLA White-PLA Filament 1.75 mm SUNLU,Low Odor Dimensional Accuracy +/- 0.02 mm 3D Printing Filament,2.2 LBS (1KG) Spool 3D Printer Filament for 3D Printers & 3D Pens,White

3D Printer Filament PLA White-PLA Filament 1.75 mm SUNLU,Low Odor Dimensional Accuracy +/- 0.02 mm 3D Printing Filament,2.2 LBS (1KG) Spool 3D Printer Filament for 3D Printers & 3D Pens,White - ♥Pla recommend temperature extrusion/nozzle temperature 190°c, 220°c (356°f, 410°f),pla fialment can be processed at 185 degrees. ♥high compatible with your 3d printer whatever all 175 mm-specification 3d printers in the market are configured to run with the pla 3d printing filaments. ♥You’ll have zero hassle printing compared with traditional brittle pla, sunlu 3d printer filaments have adjusted the degradability of the material for optimal performance,so sunlu pla filaments are not brittle during 3d printing jobs. ♥Material pla, color white, weight 1 kg (approximately 220 lbs) spool. ♥30-day money-back guarantee we are so confident in our 3d printer fialment that we offer a full 30-day guaranteebuy it,use it and if you aren’t happy with it,tell us and we’ll refund your money.

 

Clear 3D Printing Filament PLA 175mm 22LBS Dimensional Accuracy of - 005mm

Clear 3D Printing Filament PLA 1.75mm 2.2LBS, Dimensional Accuracy of +/- 0.05mm

Clear 3D Printing Filament PLA 1.75mm 2.2LBS, Dimensional Accuracy of +/- 0.05mm - Perfect and easy for school, home, showroom, office and electronics fields etc, work well with most fdm 3d printer, makerbot, dremel, up, cubify, leapfrog creatr, builder, reprap, felix, ultimaker, afinia, flashforge, solidoodle 2, printrbot lc, makergear m2 and other fdm 3d printers. Cools quickly, available in both solid and translucent colors, gives printed objects a glossy look and more pleasant smell when extruded, recommended extrusion temperature is 195°c-215°c(383°f-419°f). 1kg (approximately 22 lbs) spool, clear, vacuumed sealed with desiccant, extra spare storage bag is included. 175mm diameter filament (dimensional accuracy +/- 005mm), spool hole diameter 283″, spool length 787″, spool width 295″. 100% money back gurantee, 24 months warranty, 7-11 professional customer service.

 

SainSmart Aluminum Metal 175mm Filament for 3D Printing 05kg11lbs

SainSmart Aluminum Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs

SainSmart Aluminum Metal 1.75mm Filament for 3D Printing, 0.5kg/1.1lbs - Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°c until properly extruded. The quality of the filament is of great quality, and no kinks or breaks. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant. Frequently asked questions 1) filament not extruding properly a check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable trial and error. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality. Best choice for perfect printing features widely used in health care, education, toys, building, automobile, electronics, anime field, etc. Sainsmart 3d printer filament sainsmart 3d printer filament provides quality abs/ pla/ pva/ hips/ petg/ tpu/ wood/ metal 3d filament with vibrant colors. Please note this will vary with each 3d printer. This filament is always round, with no oily residue, no air bubbles, and it comes loaded on a quality spool. For common 3d printers such as reprap, flashforge, makerbot,afinia,solidoodle 2,printrbot lc,makergear m2, up and more. 2) how do i store my filament a most filaments tend to absorb moisture from the air because of this your filament can become brittle and slowly degrade the quality. 3) is your filament tangled a check that the spool is spinning smoothly on the mount.

 

ABS Filaments for 3D Printer-SUNLU Orange ABS Filament 175 mmLow Odor Dimensional Accuracy - 002 mm 3D Printing Filament22 LBS 1KG Spool 3D Printer Filament for 3D Printers 3D PensOrange

ABS Filaments for 3D Printer-SUNLU Orange ABS Filament 1.75 mm,Low Odor Dimensional Accuracy +/- 0.02 mm 3D Printing Filament,2.2 LBS (1KG) Spool 3D Printer Filament for 3D Printers & 3D Pens,Orange

ABS Filaments for 3D Printer-SUNLU Orange ABS Filament 1.75 mm,Low Odor Dimensional Accuracy +/- 0.02 mm 3D Printing Filament,2.2 LBS (1KG) Spool 3D Printer Filament for 3D Printers & 3D Pens,Orange - Abs 3d printer filament 175mm filament diameter, dimensional accuracy of +/- 002mm, 1kg (approx 220 lbs) spool. Abs is suitable to 3d print functional parts, like spare parts for machines or objects that are exposed to high temperatures like sunlight or hot water. Recommended temperature heating bed temperature is from 80 to 120 celsius extrusion/nozzle temperature for the abs filament is from 220 to 240 celsius please print on a heated surface when using abs filament as your prints will be deformed if you don’t. If you are new to 3d printing, sunlu abs filament is a good material to start with because it is easy to use and performs well on most prints. Abs has a glossy appearance it can be easily cut, filed or glued post printing abs can also be smoothed with acetone abs is a tough and durable thermoplastic it’s ability to with stand higher temperatures.

 

Hackka 175mm 1KG PLA 3D Printing Filament Copper

Hackka 1.75mm 1KG PLA 3D Printing Filament (Copper)

Hackka 1.75mm 1KG PLA 3D Printing Filament (Copper) - Printing temperature 200-230 degree celsius 215 degree celsius recommended. Compatible with all 3d printers. Metallic red copper appearance.

 

Proto-Pasta Glitter Flake HTPLA Stardust 3D Printing Filament 175mm 500g

Proto-Pasta Glitter Flake HTPLA Stardust 3D Printing Filament 1.75mm 500g

Proto-Pasta Glitter Flake HTPLA Stardust 3D Printing Filament 1.75mm 500g - All material is sealed with desiccant in a plastic bag. Glitter flake htpla. Prints with standard pla settings, no heated bed or fancy hardware required. No abrasive fillers so expect normal wear with standard nozzles. Usable on all pla-compatible printers, such as makerbot, ultimaker, printrbot, lulzbot, and more.

 

3D MARS 12 Wood-Infused PLA 175mm 3D Printing Filament3D Printer Filament 175mm PLADimensional Accuracy - 005mm12kg Spool175 mm PLA 3D Filament for Most 3D Printer 3D Printing Pen

3D MARS 12% Wood-Infused PLA 1.75mm ,3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen

3D MARS 12% Wood-Infused PLA 1.75mm ,3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen - ✔Gross meter and weight 3d mars wood 3d printer filament is 136kg (including spool, approximately 295 lbs) with about 390 meters filament each. ✔+/-005mm filament diameter tolerances 175mm diameter length of filament’s tight tolerance to ensure consistent feeding and stable prints. ✔ 3d printer filament 175 eco-friendly wood pla filament (including 12% wood) is suitable for high precision while printing . ✔ compatibility 3dmars wood filament pla 175 works well with makerbot, ultimaker, 3d pen, prusa i3 ect. ✔ Better smell the air is filled with slightly wood smell when printing.

 

PLA 3D Pen Filament Refills16 Colors 20 Feet Each with 100 Stencils EBooks - Dikale 3D Printing Pen Filament 175mm Total 320 Feet for PACKGOUT MYNT3D Soyan DeWang Scribbler 3D Doodler Pen

PLA 3D Pen Filament Refills(16 Colors, 20 Feet Each) with 100 Stencils EBooks – Dikale 3D Printing Pen Filament 1.75mm Total 320 Feet for PACKGOUT, MYNT3D, Soyan, DeWang, Scribbler 3D Doodler Pen

PLA 3D Pen Filament Refills(16 Colors, 20 Feet Each) with 100 Stencils EBooks – Dikale 3D Printing Pen Filament 1.75mm Total 320 Feet for PACKGOUT, MYNT3D, Soyan, DeWang, Scribbler 3D Doodler Pen - ✔️【save 30%】save 30% on dikale pla filament when you purchase with dikale 3d pen(asin b074j94gjz, b074j7s4tv) just add both to cart to checkout, do not need code. ✔️【16 colors 20 feet each color】 16 colors pla filament to scribble your 3d artistic masterpiece idea a great gift set for your kids and art lover to have fun with crafting and drawing. ✔️【Non-toxic and safer to kids】 compared to abs, pla filament is non-toxic and safer to kids. ✔️【100% satisfaction guarantee】 please feel free to contact us via [email protected] whenever you need help we guarantee 30 days returned and money back, 1 year warranty, lifetime service. ✔️【175 mm filament】 universal compatible with most 175 mm 3d pens and printers(dimensional accuracy +/- 005 mm) such as nextech amzdeal soyan ilifesmart aerb shonco mohoo anpro mookie afunta husoar ido3d tangmi 3d pen.

 

USAFilament 9800427 PLA 3D Printing Filament 22 lb 3 mm Black Spool

USAFilament 9800427 PLA 3D Printing Filament, 2.2 lb., 3 mm, Black Spool

USAFilament 9800427 PLA 3D Printing Filament, 2.2 lb., 3 mm, Black Spool - High end filament backed by american 3d printing experts. Compatible with a variety of printers. Made with high grade inputs for superior quality. Recommended extrusion temperature 180°c, 210°c (356°f, 410°f). Sealed to avoid dehydration of material and thus a longer shelf life.

 

SemiFlex TPU 3D Printing Filament - 175mm 5kg - WATER

SemiFlex TPU 3D Printing Filament – 1.75mm .5kg – WATER

SemiFlex TPU 3D Printing Filament – 1.75mm .5kg – WATER - Semi flex 3d printing filament boasts flexibility, strength and reliability for your 3d printing projects. Suggested applications&snap-fit parts, high resolution text, active hinges key features shore hardness = 98a 600% elongation provides significant flexibility 75% greater tensile strength the most flexible products patented low friction exterior allows for smooth feeding consistent diameter and material properties providing reliable, high quality prints chemical resistant to many materials, including naphtha, astm oils #1-3, petroleum and freon adheres to most build platform materials (painter tape can help) reach and rohs 2002/95/ec directive compliant printing guidelines extruder temperature&nabs 225°c – 235°c platform temperature 80°c – 110°c glue and/ or blue painters tape is suggested if not using a heated bed. In some cases the more rigid composition supports ease of printing in certain printers. Print speed&nabs top and bottom layers 10-20 mm/ sec (600-1200 mm/ min) infill speeds 15-35 mm/ sec (900-2100 mm/ min)&nabs layer 2+ use cooling fan if available. The slightly more rigid composition vs traditional ninjaflex allows for increased tensile strength.

 

3D MARS White 3D Printing Filament3D Printer Filament 175mm PLADimensional Accuracy - 005mm12kg Spool175 mm PLA 3D Filament for Most 3D Printer 3D Printing Pen

3D MARS White 3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen

3D MARS White 3D Printing Filament,3D Printer Filament 1.75mm PLA,Dimensional Accuracy +/- 0.05mm,1.2kg Spool,1.75 mm PLA 3D Filament for Most 3D Printer & 3D Printing Pen - +/-005mm filament diameter tolerances175mm diameter length of filament’s tight tolerance to ensure consistent feeding and stable prints. Compatibilitywhite filament works well with makerbot, ultimaker, 3d pen, prusa i3 ect. Gross meter and weight white 3d printer filament are 136kg(including spool, approximately 29lbs) with 390 meter. 3d printer filament 175 3dmars white filament is suitable for high precision while printing. Better smell the air is filled with slightly sweet smell likes candy when printing.

 

3D Printing Filament Material 175mm 12 Colors 33 Feet Each with 50 stencils eBook - ABS 3D Pen Filament Refill Loops - 393 feet long in total - Safe No Smell Extra long loops - 3D Printer Supplier

3D Printing Filament Material 1.75mm 12 Colors, 33 Feet Each with 50 stencils eBook – ABS 3D Pen Filament Refill Loops – 393 feet long in total – Safe, No Smell, Extra long loops – 3D Printer Supplier

3D Printing Filament Material 1.75mm 12 Colors, 33 Feet Each with 50 stencils eBook – ABS 3D Pen Filament Refill Loops – 393 feet long in total – Safe, No Smell, Extra long loops – 3D Printer Supplier - ✏️10+2 colors besides the multiple colors (white, black, red, green, yellow, blue, violet, gray, pink and purple) you get two more glowing-in-the-dark colors (blue and green) a great gift for your kids and art lover to have fun with colorful crafting and drawing. ✏️Non-toxic & odor free the filament set is made of non-toxic abs plastic, thus it safe even for little children moreover 3d pens are more durable with abs than with pla filaments. ✏️Bonus & guarantee bonus & guarantee we guarantee 30 days returned and 100% money-back, 1 year warranty, lifetime service furthermore, don’t worry if you run out of ideas we’ll send you an email with 50 stencils for 3d drawing. ✏️Yes, it fits your pen universal compatible with most 175 mm 3d pens and printers (dimensional accuracy +/- 005 mm) filaments refills fit 3d pens (packgout, mynt3d, soyan, dewang, scribbler 3d doodler etc) and printers (nextech amzdeal soyan ilifesmart aerb shonco mohoo anpro mookie afunta husoar ido3d tangmi 3d pen). ✏️Long enough refilling 3d pens interrupt the process of masterpiece creation that’s why our filament is made in 32,8 feet loops, which are 393 feet long in total.

 

CCTREE 285mm 3mm PLA 3D Printing Filament Material Accuracy - 005mm 1kg Spool 22lbs Green

CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Green

CCTREE 2.85mm (3mm) PLA 3D Printing Filament Material Accuracy +/- 0.05mm 1kg Spool (2.2lbs), Green - Compatible with makerbot,up,afinia,leapfrog creatr, builder,reprap,felix, ultimaker and any other fdm 3d printers. Pla (polylactic acid) 3d printing filament vacuumed sealed with desiccant. Print temperature 190, 220°c, depending on printer model. Spool sizediameter 200mm + inner hub 55mm. 285mm diameter, 1kg net weight, pla filament.