24 Best Feet Rubbers

 

JW Winco 8T75SA6GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 12-13 Thread Size 197 Base Diameter 295 Thread Length

J.W. Winco 8T75SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1/2-13 Thread Size, 1.97″ Base Diameter, 2.95 Thread Length

J.W. Winco 8T75SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1/2-13 Thread Size, 1.97″ Base Diameter, 2.95 Thread Length - To insure proper leveling mount size, divide the machine weight by the number of feet required. Gn 440. This will equal the pounds or load per leveling foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). 5 leveling feet are simple, economically priced components. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

JW Winco 8T125SA8GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 12-13 Thread Size 315 Base Diameter 492 Thread Length

J.W. Winco 8T125SA8/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1/2-13 Thread Size, 3.15″ Base Diameter, 4.92 Thread Length

J.W. Winco 8T125SA8/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1/2-13 Thread Size, 3.15″ Base Diameter, 4.92 Thread Length - Gn 440. This will equal the pounds or load per leveling foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. 5 leveling feet are simple, economically priced components.

 

JW Winco 12N80SA5GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Metric Size M12 x 175 Thread Size 40mm Base Diameter 80mm Thread Length

J.W. Winco 12N80SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M12 x 1.75 Thread Size, 40mm Base Diameter, 80mm Thread Length

J.W. Winco 12N80SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M12 x 1.75 Thread Size, 40mm Base Diameter, 80mm Thread Length - 5 leveling feet are simple, economically priced components. Gn 440. This will equal the pounds or load per leveling foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

Silicone Rubber Feet 7mmL x 7mmW x 45mmH 8pcs Self Adhesive RB220

Silicone Rubber Feet 7mm(L) x 7mm(W) x 4.5mm(H) 8pcs Self Adhesive [RB220]

Silicone Rubber Feet 7mm(L) x 7mm(W) x 4.5mm(H) 8pcs Self Adhesive [RB220] - 5mm(h) 8pcs self adhesive [rb220] these rubber feet are made out of top quality silicone and are perfect for under almost any surface with their industrial strength adhesive. This offer is for 1 set of the item in the picture. Whether it’s a computer build, automotive application or home improvement project, these feet are the quality solution for the problem. Silicone rubber feet 7mm(l) x 7mm(w) x 4.

 

JW Winco 10N60T30GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad Metric Size 40mm Base Diameter M10 x 15 Thread Size 60mm Thread Length

J.W. Winco 10N60T30/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, 40mm Base Diameter, M10 x 1.5 Thread Size, 60mm Thread Length

J.W. Winco 10N60T30/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, 40mm Base Diameter, M10 x 1.5 Thread Size, 60mm Thread Length - Gn 440 leveling feet are simple, economically priced components. The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).

 

JW Winco 10T75SA8GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 58-11 Thread Size 315 Base Diameter 295 Thread Length

J.W. Winco 10T75SA8/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 5/8-11 Thread Size, 3.15″ Base Diameter, 2.95 Thread Length

J.W. Winco 10T75SA8/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 5/8-11 Thread Size, 3.15″ Base Diameter, 2.95 Thread Length - Gn 440. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). To insure proper leveling mount size, divide the machine weight by the number of feet required. The values given in the table assume a straight compressive load, perpendicular to the foot. 5 leveling feet are simple, economically priced components. This will equal the pounds or load per leveling foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

 

JW Winco 8N63SA5GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Metric Size M8 x 125 Thread Size 40mm Base Diameter 63mm Thread Length

J.W. Winco 8N63SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M8 x 1.25 Thread Size, 40mm Base Diameter, 63mm Thread Length

J.W. Winco 8N63SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M8 x 1.25 Thread Size, 40mm Base Diameter, 63mm Thread Length - Gn 440. This will equal the pounds or load per leveling foot. 5 leveling feet are simple, economically priced components. The values given in the table assume a straight compressive load, perpendicular to the foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

 

JW Winco 6T125SA5GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 38-16 Thread Size 157 Base Diameter 492 Thread Length

J.W. Winco 6T125SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 1.57″ Base Diameter, 4.92 Thread Length

J.W. Winco 6T125SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 1.57″ Base Diameter, 4.92 Thread Length - The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). This will equal the pounds or load per leveling foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. The values given in the table assume a straight compressive load, perpendicular to the foot. 5 leveling feet are simple, economically priced components. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. Gn 440.

 

JW Winco 10N50SA6GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Metric Size M10 x 15 Thread Size 50mm Base Diameter 50mm Thread Length

J.W. Winco 10N50SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M10 x 1.5 Thread Size, 50mm Base Diameter, 50mm Thread Length

J.W. Winco 10N50SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M10 x 1.5 Thread Size, 50mm Base Diameter, 50mm Thread Length - Gn 440. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). To insure proper leveling mount size, divide the machine weight by the number of feet required. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. 5 leveling feet are simple, economically priced components. This will equal the pounds or load per leveling foot. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

Set of 25 Rubber FeetRubber Bumpers 1 Diameter 12 Height- Screw Hole Dia 732

Set of 25 Rubber Feet/Rubber Bumpers 1″ Diameter 1/2″ Height.- Screw Hole Dia 7/32″

Set of 25 Rubber Feet/Rubber Bumpers 1″ Diameter 1/2″ Height.- Screw Hole Dia 7/32″ - Can be used on several different applications as well. Specs height 1/2″ diameter 1″ recessed hole opening 1/2″ screw hole diameter 7/32″. Set of 25 rubber bumper feet 1″ dia 1/2″ height + screws & metal washer built-in package included (25) rubber feet (25) screws the integral metal washer in the mounting hole helps prevent mounting screw “break-through” and adds overall durability.

 

JW Winco 8N50T30GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad Metric Size 40mm Base Diameter M8 x 125 Thread Size 50mm Thread Length

J.W. Winco 8N50T30/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, 40mm Base Diameter, M8 x 1.25 Thread Size, 50mm Thread Length

J.W. Winco 8N50T30/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, 40mm Base Diameter, M8 x 1.25 Thread Size, 50mm Thread Length - Gn 440 leveling feet are simple, economically priced components. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).

 

JW Winco 6T75SA5GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 38-16 Thread Size 157 Base Diameter 295 Thread Length

J.W. Winco 6T75SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 1.57″ Base Diameter, 2.95 Thread Length

J.W. Winco 6T75SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 1.57″ Base Diameter, 2.95 Thread Length - Gn 440. To insure proper leveling mount size, divide the machine weight by the number of feet required. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. This will equal the pounds or load per leveling foot. 5 leveling feet are simple, economically priced components.

 

JW Winco 6T75SA7GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 38-16 Thread Size 236 Base Diameter 295 Thread Length

J.W. Winco 6T75SA7/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 2.36″ Base Diameter, 2.95 Thread Length

J.W. Winco 6T75SA7/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/8-16 Thread Size, 2.36″ Base Diameter, 2.95 Thread Length - This will equal the pounds or load per leveling foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. Gn 440. To insure proper leveling mount size, divide the machine weight by the number of feet required. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. 5 leveling feet are simple, economically priced components.

 

JW Winco 6T75T30GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad Inch Size 157 Base Diameter 38-16 Thread Size 295 Thread Length

J.W. Winco 6T75T30/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1.57″ Base Diameter, 3/8-16 Thread Size, 2.95″ Thread Length

J.W. Winco 6T75T30/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1.57″ Base Diameter, 3/8-16 Thread Size, 2.95″ Thread Length - The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). Gn 440 leveling feet are simple, economically priced components. The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

 

JW Winco 11T100SA8GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Inch Size 34-10 Thread Size 315 Base Diameter 394 Thread Length

J.W. Winco 11T100SA8/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/4-10 Thread Size, 3.15″ Base Diameter, 3.94 Thread Length

J.W. Winco 11T100SA8/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 3/4-10 Thread Size, 3.15″ Base Diameter, 3.94 Thread Length - The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. 5 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). This will equal the pounds or load per leveling foot. Gn 440. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

4 Screw On Rubber Mount Feet Bottom Diameter 2-116 x Top Diameter 1-1732 Stud-14-20 x 38

4 Screw On Rubber Mount Feet Bottom Diameter 2-1/16 x Top Diameter 1-17/32. Stud-1/4-20 x 3/8

4 Screw On Rubber Mount Feet Bottom Diameter 2-1/16 x Top Diameter 1-17/32. Stud-1/4-20 x 3/8 - Stud-1/4-20 x 3/8 package includes 4 screw on rubber mount feet specs top diameter of rubber 1-17/32 bottom diameter of rubber 2-1/16 thickness of rubber 11/16 stud-1/4-20 x 3/8″ length. Lot of 4 screw on rubber mount feet bot dia 2-1/16 x top dia 1-17/32.

 

JW Winco 8T100T32GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad Inch Size 236 Base Diameter 12-13 Thread Size 394 Thread Length

J.W. Winco 8T100T32/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 2.36″ Base Diameter, 1/2-13 Thread Size, 3.94″ Thread Length

J.W. Winco 8T100T32/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 2.36″ Base Diameter, 1/2-13 Thread Size, 3.94″ Thread Length - The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot. Gn 440 leveling feet are simple, economically priced components. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

 

JW Winco 10N80SA6GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Metric Size M10 x 15 Thread Size 50mm Base Diameter 80mm Thread Length

J.W. Winco 10N80SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M10 x 1.5 Thread Size, 50mm Base Diameter, 80mm Thread Length

J.W. Winco 10N80SA6/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M10 x 1.5 Thread Size, 50mm Base Diameter, 80mm Thread Length - The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. This will equal the pounds or load per leveling foot. 5 leveling feet are simple, economically priced components. To insure proper leveling mount size, divide the machine weight by the number of feet required. Gn 440.

 

JW Winco 8N40SA5GV Series GN 4405 Stainless Steel Leveling Feet with Rubber Pad Metric Size M8 x 125 Thread Size 40mm Base Diameter 40mm Thread Length

J.W. Winco 8N40SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M8 x 1.25 Thread Size, 40mm Base Diameter, 40mm Thread Length

J.W. Winco 8N40SA5/GV Series GN 440.5 Stainless Steel Leveling Feet with Rubber Pad, Metric Size, M8 x 1.25 Thread Size, 40mm Base Diameter, 40mm Thread Length - This will equal the pounds or load per leveling foot. Gn 440. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). 5 leveling feet are simple, economically priced components. To insure proper leveling mount size, divide the machine weight by the number of feet required. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

Lot of 25pcs Rubber Stem Bumper Feet 316 Stem Dia x 14 Stem Length

Lot of (25pcs) Rubber Stem Bumper Feet 3/16″ Stem Dia. x 1/4″ Stem Length

Lot of (25pcs) Rubber Stem Bumper Feet 3/16″ Stem Dia. x 1/4″ Stem Length - Lot of (25pcs) rubber stem bumper feet 3/16″ stem dia. X 1/4″ stem length package includes 25 rubber stem bumpers measurements head diameter 1/2″ stem diameter 3/16″ stem length 1/4″.

 

Set of 25 12 Diameter x 14 Height Curved Top Rubber Feet w Washer  Screws

Set of 25 1/2″ Diameter x 1/4″ Height Curved Top Rubber Feet w Washer + Screws

Set of 25 1/2″ Diameter x 1/4″ Height Curved Top Rubber Feet w Washer + Screws - Set of 25 rubber feet 1/2″ diameter 1/4″ in height with screws and metal washer built-in package includes (25) rubber feet (25) #6 x 3/4″ screws the integral metal washer in the mounting hole helps prevent mounting screw “break-through” and adds overall durability. Specs height 1/4″ diameter 1/2″ recessed hole opening 1/4″ screw hole diameter 1/8″. Can be used on several different applications as well.

 

JW Winco 6T75T31GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad Inch Size 197 Base Diameter 38-16 Thread Size 295 Thread Length

J.W. Winco 6T75T31/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1.97″ Base Diameter, 3/8-16 Thread Size, 2.95″ Thread Length

J.W. Winco 6T75T31/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1.97″ Base Diameter, 3/8-16 Thread Size, 2.95″ Thread Length - The values given in the table assume a straight compressive load, perpendicular to the foot. Gn 440 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

 

JW Winco 8T125T31GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad Inch Size 197 Base Diameter 12-13 Thread Size 492 Thread Length

J.W. Winco 8T125T31/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1.97″ Base Diameter, 1/2-13 Thread Size, 4.92″ Thread Length

J.W. Winco 8T125T31/GV Series GN 440 Stainless Steel Leveling Feet with Rubber Pad, Inch Size, 1.97″ Base Diameter, 1/2-13 Thread Size, 4.92″ Thread Length - The values given in the table assume a straight compressive load, perpendicular to the foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). Gn 440 leveling feet are simple, economically priced components.

 

Lot of 25 Rubber Bumper Feet 1 Diameter x 1 Height  Screws Metal Washers Built-in

Lot of 25 Rubber Bumper Feet 1″ Diameter x 1″ Height + Screws & Metal Washers Built-in

Lot of 25 Rubber Bumper Feet 1″ Diameter x 1″ Height + Screws & Metal Washers Built-in - Can be used on several different applications as well. Lot of 25 rubber bumper feet 1″ tall 1″ wide + screws & metal washers built-in package includes (25) rubber feet (25) screws the integral metal washer in the mounting hole helps prevent mounting screw “break-through” and adds overall durability. Specs height 1″ diameter 1″ recessed hole opening 5/16″ screw hole diameter 5/32″.