25 Greatest Barstocks

 

Legines Brass Inverted Flare Fitting Barstock 90 Degree Male Elbow 12 Tube OD x 14 NPT Male Pack of 2

Legines Brass Inverted Flare Fitting, Barstock 90 Degree Male Elbow, 1/2″ Tube OD x 1/4″ NPT Male, Pack of 2

Legines Brass Inverted Flare Fitting, Barstock 90 Degree Male Elbow, 1/2″ Tube OD x 1/4″ NPT Male, Pack of 2 - Working pressure up to 2000psi depending on tube (od),will withstand burst pressure 5000psi with bundy-weld. Not for use in potable drinking water applications. For use with liquid petroleum (lp) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering. Adapts npt male end to tube female end at a 90-degree angle. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Anderson Metals Brass Pipe Fitting Barstock Tee 18 x 18 x 18 Female Pipe

Anderson Metals Brass Pipe Fitting, Barstock Tee, 1/8″ x 1/8″ x 1/8″ Female Pipe

Anderson Metals Brass Pipe Fitting, Barstock Tee, 1/8″ x 1/8″ x 1/8″ Female Pipe - Meets specifications astm b584 and asme/ansi b16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Female national pipe taper (npt) threads for connecting to male threaded pipes. Tee with three openings for connecting and branching three pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f).

 

Anderson Metals Brass Pipe Fitting 90 Degree Barstock Street Elbow 14 Male Pipe x 14 Female Pipe

Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/4″ Male Pipe x 1/4″ Female Pipe

Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/4″ Male Pipe x 1/4″ Female Pipe - Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends. 90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. Meets specifications astm b584 and asme/ansi b16 for quality assurance. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories.

 

Legines Brass Pipe Fitting 90 Degree Barstock Street Elbow 18 NPT Male x 18 NPT Female Pack of 2

Legines Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/8″ NPT Male x 1/8″ NPT Female (Pack of 2)

Legines Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/8″ NPT Male x 1/8″ NPT Female (Pack of 2) - Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. 90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends.

 

iztor 2PCS Brass Pipe Fitting Barstock Street Tee 18 Female Pipe x 18 Male Pipe x 18 Female Pipe

iztor 2PCS Brass Pipe Fitting, Barstock Street Tee, 1/8″ Female Pipe x 1/8″ Male Pipe x 1/8″ Female Pipe

iztor 2PCS Brass Pipe Fitting, Barstock Street Tee, 1/8″ Female Pipe x 1/8″ Male Pipe x 1/8″ Female Pipe - Meets specifications astm b584 and asme/ansi b16 for quality assurance. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Female and male national pipe taper (npt) threads on two ends and female npt threads on the branch for connecting three threaded pipes. Street tee with three openings for connecting and branching three pipes with different ends,including 2 pcs.

 

1080 Forging Steel Barstock for Knife Making -- 316 x 1-12 x 12

1080 Forging Steel Barstock for Knife Making — 3/16″ x 1-1/2″ x 12″

1080 Forging Steel Barstock for Knife Making — 3/16″ x 1-1/2″ x 12″ - Dimensions are 3/16″ x 1-1/2″ x 12″. All orders from texas knifemakers supply are shipped usps priority mail (2-3 business day delivery) with a tracking number order multiple items to combine on shipping and save. 1080 is a moderately high carbon content forging steel used for making knives this oil quenching steel is in the annealed state. Iron alloy contains 088% carbon, 090% manganese, 005% sulphur, and 004% phosphorus. Layer 1080 with 15n20 to forge damascus, and etch with ferric chloride to bring out the contrast higher carbon steels like 1080 will keep an edge much better than stainless steels, but are also more susceptible to rust without proper care.

 

Anderson Metals Brass Pipe Fitting Barstock Tee 12 x 12 x 12 Female Pipe

Anderson Metals Brass Pipe Fitting, Barstock Tee, 1/2″ x 1/2″ x 1/2″ Female Pipe

Anderson Metals Brass Pipe Fitting, Barstock Tee, 1/2″ x 1/2″ x 1/2″ Female Pipe - Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Female national pipe taper (npt) threads for connecting to male threaded pipes. Tee with three openings for connecting and branching three pipes. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Meets specifications astm b584 and asme/ansi b16 for quality assurance. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Legines Brass Pipe Fitting 45 Degree Barstock Street Elbow 12 Female x 12 Male Pack Of 2

Legines Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/2″ Female x 1/2″ Male, Pack Of 2

Legines Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/2″ Female x 1/2″ Male, Pack Of 2 - -Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. -Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). -These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. -45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. -female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends.

 

Legines Brass Pipe Fitting Barstock Male Run Tee 18 NPT Female x 18 NPT Male x 18 NPT Female Pack of 2

Legines Brass Pipe Fitting, Barstock Male Run Tee, 1/8″ NPT Female x 1/8″ NPT Male x 1/8″ NPT Female (Pack of 2)

Legines Brass Pipe Fitting, Barstock Male Run Tee, 1/8″ NPT Female x 1/8″ NPT Male x 1/8″ NPT Female (Pack of 2) - Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Street tee with three openings for connecting and branching three pipes with different ends. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Female and male national pipe taper (npt) threads on two ends and female nptthreads on the branch for connecting three threaded pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Anderson Metals 06130 Brass Pipe Fitting 90 Degree Barstock Elbow 14 NPT Male x 14 NPT Male Pipe

Anderson Metals 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1/4″ NPT Male x 1/4″ NPT Male Pipe

Anderson Metals 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1/4″ NPT Male x 1/4″ NPT Male Pipe - 90-degree elbow for connecting two pipes at an angle. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Male npt threads for connecting to female threaded pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Legines Brass Pipe Fitting 90 Degree Barstock Street Elbow 38 NPT Male x 38 Female

Legines Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 3/8″ NPT Male x 3/8″ Female

Legines Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 3/8″ NPT Male x 3/8″ Female - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. 90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends.

 

1095 Steel barstock for forging and knife making 18 x 1-12 x 12 18 Thick X 1-14 wide X 12 Long

1095 Steel barstock for forging and knife making 1/8″ x 1-1/2″ x 12″ …1/8″ Thick X 1-1/4 wide X 12″ Long

1095 Steel barstock for forging and knife making 1/8″ x 1-1/2″ x 12″ …1/8″ Thick X 1-1/4 wide X 12″ Long - This steel is perfect for knives that will not be formed and made too thin & is ideal for chopping knives, functional show swords, replica blades as well as daggers. 1095 forging steel is also a very useful metal for making a number of dining tools & is often the metal of choice when making machetes. 1095 forging steel is cold rolled & annealed with a bright finish which makes it perfect for forging, blades, tools & other parts. When used to make knives, 1095 steel holds a great edge and is a very easy steel to sharpen. 1095 has a carbon content of 95% which makes makes this a hard steel that will reduce the amount of wear that a blade will experience over time.

 

Anderson Metals Brass Pipe Fitting Barstock Tee 18 Female Pipe x 18 Female Pipe x 18 Male Pipe

Anderson Metals Brass Pipe Fitting, Barstock Tee, 1/8″ Female Pipe x 1/8″ Female Pipe x 1/8″ Male Pipe

Anderson Metals Brass Pipe Fitting, Barstock Tee, 1/8″ Female Pipe x 1/8″ Female Pipe x 1/8″ Male Pipe - Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Tee with three openings for connecting and branching three pipes. Meets specifications astm b584 and asme/ansi b16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Female national pipe taper (npt) threads on the main run and male npt threads on the branch for connecting three threaded pipes.

 

1095 Steel barstock for forging and knife making 316 x 1-12 x 12

1095 Steel barstock for forging and knife making 3/16″ x 1-1/2″ x 12″

1095 Steel barstock for forging and knife making 3/16″ x 1-1/2″ x 12″ - This steel is perfect for knives that will not be formed and made too thin & is ideal for chopping knives, functional show swords, replica blades as well as daggers. 1095 forging steel is cold rolled & annealed with a bright finish which makes it perfect for forging, blades, tools & other parts. 1095 has a carbon content of 95% which makes makes this a hard steel that will reduce the amount of wear that a blade will experience over time. 1095 forging steel is also a very useful metal for making a number of dining tools & is often the metal of choice when making machetes. When used to make knives, 1095 steel holds a great edge and is a very easy steel to sharpen.

 

Legines Brass Pipe Fitting Barstock Male Branch Tee 18 NPT Female x 18 NPT Female x 18 NPT Male Pack of 2

Legines Brass Pipe Fitting, Barstock Male Branch Tee, 1/8″ NPT Female x 1/8″ NPT Female x 1/8″ NPT Male (Pack of 2)

Legines Brass Pipe Fitting, Barstock Male Branch Tee, 1/8″ NPT Female x 1/8″ NPT Female x 1/8″ NPT Male (Pack of 2) - Female npt threads on the main run and male npt threads on the branch for connecting three threaded pipes. Tee with three openings for connecting and branching three pipes. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f).

 

Anderson Metals 06130 Brass Pipe Fitting 90 Degree Barstock Elbow 18 NPT Male x 18 NPT Male Pipe

Anderson Metals 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1/8″ NPT Male x 1/8″ NPT Male Pipe

Anderson Metals 06130 Brass Pipe Fitting, 90 Degree Barstock Elbow, 1/8″ NPT Male x 1/8″ NPT Male Pipe - Male npt threads for connecting to female threaded pipes. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 90-degree elbow for connecting two pipes or fittings at an angle.

 

Anderson Metals Brass Pipe Fitting 90 Degree Barstock Street Elbow 18 Male Pipe x 18 Female Pipe

Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/8″ Male Pipe x 1/8″ Female Pipe

Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/8″ Male Pipe x 1/8″ Female Pipe - 90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends. Meets specifications astm b584 and asme/ansi b16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories.

 

Legines Brass Pipe Fitting 45 Degree Barstock Street Elbow 18 NPT Female to 18 NPT Male

Legines Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/8″ NPT Female to 1/8″ NPT Male

Legines Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/8″ NPT Female to 1/8″ NPT Male - -Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends. -these fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. -Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. -Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). -45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle.

 

Brass Barstock for Knife Guards Bolsters 316 X 34 X 12

Brass Barstock for Knife Guards & Bolsters 3/16″ X 3/4″ X 12″

Brass Barstock for Knife Guards & Bolsters 3/16″ X 3/4″ X 12″ - Dimensions are 3/16″ x 3/4″ x 12″. Use this barstock to machine your own bolsters and guards. Polishes to a high shine finish, machines very well, doesn’t rust in the open air. Made in the usa from the highest grade brass barstock available 360 freemachining bass.

 

Anderson Metals Brass Pipe Fitting 90 Degree Barstock Street Elbow 12 Male Pipe x 12 Female Pipe

Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/2″ Male Pipe x 1/2″ Female Pipe

Anderson Metals Brass Pipe Fitting, 90 Degree Barstock Street Elbow, 1/2″ Male Pipe x 1/2″ Female Pipe - Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends. Meets specifications astm b584 and asme/ansi b16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. 90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle.

 

1095 Forging Steel Barstock for Knife Making -- 316 x 1-12 x 12

1095 Forging Steel Barstock for Knife Making — 3/16″ x 1-1/2″ x 12″

1095 Forging Steel Barstock for Knife Making — 3/16″ x 1-1/2″ x 12″ - Iron alloy contains 10% carbon, 090% manganese, 005% sulphur, and 004% phosphorus. 1095 is a moderately high carbon content forging steel used for making knives this oil quenching steel is in the annealed state. Higher carbon steels like 1095 will keep an edge much better than stainless steels, but are also more susceptible to rust without proper care (we mark our 1095 with blue and orange to distinguish it from other steels we sell). Dimensions are 3/16″ x 1-1/2″ x 12″. Layer 1095 with 15n20 to forge damascus, and etch with ferric chloride to bring out the contrast.

 

Anderson Metals Brass Pipe Fitting Barstock Street Tee 14 Female Pipe x 14 Male Pipe x 14 Female Pipe

Anderson Metals Brass Pipe Fitting, Barstock Street Tee, 1/4″ Female Pipe x 1/4″ Male Pipe x 1/4″ Female Pipe

Anderson Metals Brass Pipe Fitting, Barstock Street Tee, 1/4″ Female Pipe x 1/4″ Male Pipe x 1/4″ Female Pipe - Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). Female and male national pipe taper (npt) threads on two ends and female npt threads on the branch for connecting three threaded pipes. Street tee with three openings for connecting and branching three pipes with different ends. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Meets specifications astm b584 and asme/ansi b16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories.

 

Legines Brass Pipe Fitting 45 Degree Barstock Street Elbow 38 NPT Female to 38 NPT Male Pack of 2

Legines Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 3/8″ NPT Female to 3/8″ NPT Male (Pack of 2)

Legines Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 3/8″ NPT Female to 3/8″ NPT Male (Pack of 2) - -brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. -45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. -Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f). -These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. -Female national pipe taper (npt) threads on one end and male npt threads on the other for connecting pipes with different ends.

 

440C Stainless Steel Barstock for Knife Making -- 316 x 1-12 x 12

440C Stainless Steel Barstock for Knife Making — 3/16″ x 1-1/2″ x 12″

440C Stainless Steel Barstock for Knife Making — 3/16″ x 1-1/2″ x 12″ - Premium grade martensitic 440c stainless steel barstock for making knife blades. Dimensions are 3/16″ x 1-1/2″ x 12″. High strength, moderate corrosion resistance, and good hardness and wear resistance. High carbon alloy contains 17% chromium, 11% carbon, 1% manganese, 1% silicon, and 017% molybdenum.

 

Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives -- 0072 x 1-12 x 12

Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives — 0.072″ x 1-1/2″ x 12″

Hi-Contrast 15N20 Steel Barstock for Making Carbon Damascus Knives — 0.072″ x 1-1/2″ x 12″ - Layer 15n20 with high carbon steels like 1080, 1095, 5160, etc to forge damascus, and etch with ferric chloride to bring out the contrast the nickel in 15n20 resists the acid, remaining bright. Its iron is alloyed with 088% carbon, 040% manganese, 20% nickel, and 010% phosphorus and silicon (the number 15n8 may be written on the bar, this is the product sku, not the nickel content). 15n20 is a bright and acid resistant metal commonly used for forging with high carbon steels like to draw out the contrast in damascus patterned billets for knives and swords. Dimensions are 0072″ x 1-1/2″ x 12″.