25 Greatest Grade 2 Nuts

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 1 Qty 500

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 1” Qty 500

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 1” Qty 500 - The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. They are a good choice for acq-treated (arsenic-free) lumber. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. 719″head height0. Tensile strength, a common measure to compare the strength of a fastener. It is the load needed to pull the fastener apart. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity500 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Steel meets astm a307 galvanization meets astm 153. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. Body diameter5/16″ (0. 3125″)thread count18length under head1″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 8 Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 8” Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 8” Qty 25 - “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Steel meets astm a307 galvanization meets astm 153. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. They are a good choice for acq-treated (arsenic-free) lumber. Body diameter3/8″ (0. Tensile strength, a common measure to compare the strength of a fastener. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 375″)thread count16length under head8″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0. It is the load needed to pull the fastener apart. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. 844″head height0. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 2 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 2” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 2” Qty 100 - Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. 3125″)thread count18length under head2″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. 719″head height0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Tensile strength, a common measure to compare the strength of a fastener. Body diameter5/16″ (0. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. It is the load needed to pull the fastener apart. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Steel meets astm a307 galvanization meets astm 153. They are a good choice for acq-treated (arsenic-free) lumber. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 6 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 6” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 6” Qty 100 - 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 3125″)thread count18length under head6″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strength, a common measure to compare the strength of a fastener. Steel meets astm a307 galvanization meets astm 153. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. They are a good choice for acq-treated (arsenic-free) lumber. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. It is the load needed to pull the fastener apart. Body diameter5/16″ (0. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. 719″head height0.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 11 Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 11” Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 11” Qty 50 - It is the load needed to pull the fastener apart. They are a good choice for acq-treated (arsenic-free) lumber. Tensile strength, a common measure to compare the strength of a fastener. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. 844″head height0. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Body diameter3/8″ (0. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity50 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. Steel meets astm a307 galvanization meets astm 153. 375″)thread count16length under head11″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 4 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 4” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 4” Qty 100 - The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Steel meets astm a307 galvanization meets astm 153. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Body diameter5/16″ (0. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. Tensile strength, a common measure to compare the strength of a fastener. It is the load needed to pull the fastener apart. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. 3125″)thread count18length under head4″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. 719″head height0. They are a good choice for acq-treated (arsenic-free) lumber. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 10 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 10” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 10” Qty 100 - The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. It is the load needed to pull the fastener apart. Steel meets astm a307 galvanization meets astm 153. They are a good choice for acq-treated (arsenic-free) lumber. Tensile strength, a common measure to compare the strength of a fastener. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. 719″head height0. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Body diameter5/16″ (0. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 3125″)thread count18length under head10″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 3 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 3” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 3” Qty 100 - Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. 375″)thread count16length under head3″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Body diameter3/8″ (0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strength, a common measure to compare the strength of a fastener. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. They are a good choice for acq-treated (arsenic-free) lumber. It is the load needed to pull the fastener apart. Steel meets astm a307 galvanization meets astm 153. 844″head height0. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 2 Qty 500

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 2” Qty 500

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 2” Qty 500 - There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. 719″head height0. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. They are a good choice for acq-treated (arsenic-free) lumber. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity500 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Steel meets astm a307 galvanization meets astm 153. 3125″)thread count18length under head2″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. Tensile strength, a common measure to compare the strength of a fastener. Body diameter5/16″ (0. It is the load needed to pull the fastener apart. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 3 Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 3” Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 3” Qty 250 - 719″head height0. Tensile strength, a common measure to compare the strength of a fastener. 3125″)thread count18length under head3″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. They are a good choice for acq-treated (arsenic-free) lumber. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Body diameter5/16″ (0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. It is the load needed to pull the fastener apart. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity250 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Steel meets astm a307 galvanization meets astm 153.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 14-20 x 2-12 Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 1/4-20 x 2-1/2” Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 1/4-20 x 2-1/2” Qty 250 - 145″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. Steel meets astm a307 galvanization meets astm 153. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity250 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. 250″)thread count20length under headminimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. 594″head height0. Body diameter1/4″ (0. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. It is the load needed to pull the fastener apart. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strength, a common measure to compare the strength of a fastener. They are a good choice for acq-treated (arsenic-free) lumber. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 10 Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 10” Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 10” Qty 25 - Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Steel meets astm a307 galvanization meets astm 153. 3125″)thread count18length under head10″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0. Body diameter5/16″ (0. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. It is the load needed to pull the fastener apart. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. They are a good choice for acq-treated (arsenic-free) lumber. 719″head height0. Tensile strength, a common measure to compare the strength of a fastener.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 2 Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 2” Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 2” Qty 250 - Tensile strength, a common measure to compare the strength of a fastener. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity250 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. They are a good choice for acq-treated (arsenic-free) lumber. Steel meets astm a307 galvanization meets astm 153. 375″)thread count16length under head2″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. Body diameter3/8″ (0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. It is the load needed to pull the fastener apart. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. 844″head height0.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 6 Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 6” Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 6” Qty 50 - Tensile strength, a common measure to compare the strength of a fastener. 375″)thread count16length under head6″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. Body diameter3/8″ (0. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. It is the load needed to pull the fastener apart. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity50 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. They are a good choice for acq-treated (arsenic-free) lumber. 844″head height0. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Steel meets astm a307 galvanization meets astm 153.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 2 Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 2” Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 2” Qty 25 - Tensile strength, a common measure to compare the strength of a fastener. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. It is the load needed to pull the fastener apart. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. 375″)thread count16length under head2″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 844″head height0. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. They are a good choice for acq-treated (arsenic-free) lumber. Body diameter3/8″ (0. Steel meets astm a307 galvanization meets astm 153. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 8 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 8” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 8” Qty 100 - Body diameter3/8″ (0. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strength, a common measure to compare the strength of a fastener. They are a good choice for acq-treated (arsenic-free) lumber. 375″)thread count16length under head8″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. Steel meets astm a307 galvanization meets astm 153. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. 844″head height0. It is the load needed to pull the fastener apart. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 5 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 5” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 5” Qty 100 - It is the load needed to pull the fastener apart. Steel meets astm a307 galvanization meets astm 153. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. 375″)thread count16length under head5″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. Tensile strength, a common measure to compare the strength of a fastener. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. They are a good choice for acq-treated (arsenic-free) lumber. Body diameter3/8″ (0. 844″head height0.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 6 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 6” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 6” Qty 100 - 844″head height0. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Body diameter3/8″ (0. 375″)thread count16length under head6″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. Steel meets astm a307 galvanization meets astm 153. It is the load needed to pull the fastener apart. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. Tensile strength, a common measure to compare the strength of a fastener. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. They are a good choice for acq-treated (arsenic-free) lumber. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 3 Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 3” Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 3” Qty 25 - They are a good choice for acq-treated (arsenic-free) lumber. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. 844″head height0. Body diameter3/8″ (0. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. 375″)thread count16length under head3″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. It is the load needed to pull the fastener apart. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Steel meets astm a307 galvanization meets astm 153. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strength, a common measure to compare the strength of a fastener. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 38-16 x 7 Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 7” Qty 25

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 3/8-16 x 7” Qty 25 - 375″)thread count16length under head7″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. It is the load needed to pull the fastener apart. They are a good choice for acq-treated (arsenic-free) lumber. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity25 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. Steel meets astm a307 galvanization meets astm 153. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Body diameter3/8″ (0. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Tensile strength, a common measure to compare the strength of a fastener. 208″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 844″head height0.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 10 Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 10” Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 10” Qty 50 - It is the load needed to pull the fastener apart. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity50 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Tensile strength, a common measure to compare the strength of a fastener. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 3125″)thread count18length under head10″minimum thread lengthminimum 6″ threadmaximum thread lengthfull threadhead diameter0. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. 719″head height0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. They are a good choice for acq-treated (arsenic-free) lumber. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Steel meets astm a307 galvanization meets astm 153. Body diameter5/16″ (0.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 14-20 x 1 Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 1/4-20 x 1” Qty 100

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 1/4-20 x 1” Qty 100 - There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. They are a good choice for acq-treated (arsenic-free) lumber. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity100 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. 250″)thread count20length under head1″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. 594″head height0. Body diameter1/4″ (0. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. Steel meets astm a307 galvanization meets astm 153. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. It is the load needed to pull the fastener apart. Tensile strength, a common measure to compare the strength of a fastener. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. 145″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 3 Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 3” Qty 50

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 3” Qty 50 - They are a good choice for acq-treated (arsenic-free) lumber. 719″head height0. Tensile strength, a common measure to compare the strength of a fastener. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. Steel meets astm a307 galvanization meets astm 153. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity50 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. 3125″)thread count18length under head3″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. It is the load needed to pull the fastener apart. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. Body diameter5/16″ (0. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 1 Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 1” Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 1” Qty 250 - Steel meets astm a307 galvanization meets astm 153. It is the load needed to pull the fastener apart. Body diameter5/16″ (0. 3125″)thread count18length under head1″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. 719″head height0. Tensile strength, a common measure to compare the strength of a fastener. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. They are a good choice for acq-treated (arsenic-free) lumber. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity250 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed.

 

Carriage Bolts Hot Dipped Galvanized Grade 2 W Nuts 516-18 x 2 Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 2” Qty 250

Carriage Bolts Hot Dipped Galvanized Grade 2 W/ Nuts 5/16-18 x 2” Qty 250 - Yield, the resistance to a load pulling on the middle of a fastener until the fastener shows permanent deformation. “18-8″, 300 series stainless steel having approximately (not exactly) 18% chromium and 8% nickel. Austentic, refers to 300 series stainless, the most popular of the stainless alloys accounting for 85%-90% of stainless fasteners soldnamed for sir robert williams austen, an english metallurgist, austentic stainless is a crystal structure formed by heating steel, chromium, and nickel to a high temperature where it forms the characteristics of 300 series stainless steel. The term “18-8″ is used interchangeably to characterize fasteners made of 302,302hq,303,304,384, xm7, and other variables of these grades with close chemical compositions. 719″head height0. There is little overall difference in corrosion resistance among the 18-8 types, but slight differences in chemical composition do make certain grades more resistant than others against particular chemicals or atmospheres. Tensile strength, a common measure to compare the strength of a fastener. The ability of stainless to form a thin layer of protection on its outside surface, called a “passive film”, is its most important characteristic in preventing corrosion. 176″materialhot-dipped galvanized grade 2 steel-offers superior rust resistance compared to zinc-plated steel. 3125″)thread count18length under head2″minimum thread lengthfully threadedmaximum thread lengthfull threadhead diameter0. It is the load needed to pull the fastener apart. Tensile strengthminimum tensile strength of 60,000 psiyield55,000-75,000 psipackage quantity250 common fastener label definitions”stainless steel”, with the addition of 12% chromium to iron, stainless steel is formed. Steel meets astm a307 galvanization meets astm 153. Body diameter5/16″ (0. The chromium protects the iron against most corrosion or red colored rust thus the term “stainless steel”. They are a good choice for acq-treated (arsenic-free) lumber.