Best 17 John Guests

 

John Guest PASVPP6 Angle Stop Adapter Valve 12 x 38 x 38

John Guest PASVPP6 Angle Stop Adapter Valve, 1/2″ x 3/8″ x 3/8″

John Guest PASVPP6 Angle Stop Adapter Valve, 1/2″ x 3/8″ x 3/8″ - All plastic adapter valve with conversion thread works on existing 3/8 compression or 1/2nps angle stop valve allowing access to water supply for reverse-osmosis systems, ice maker, automatic coffee equipment, etc. With capability to shut off water supply to dedicated line for easy filter replacements.

 

John Guest Acetal Copolymer Tube Fitting Rigid Elbow 38 Tube OD x 14 NPTF Male Pack of 10

John Guest Acetal Copolymer Tube Fitting, Rigid Elbow, 3/8″ Tube OD x 1/4″ NPTF Male (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Rigid Elbow, 3/8″ Tube OD x 1/4″ NPTF Male (Pack of 10) - Working pressure of up to 150 psi. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Rigid elbow for connecting two pipes or fittings at an angle. Push-to-connect fitting connects to pipes or tubing on one end and has an nptf male connector on the other. Meets nsf/ansi standards 14, 51, and 61 for quality assurance.

 

John Guest Acetal Copolymer Tube Fitting Swivel Elbow 38 Tube OD x 14 NPTF Male Pack of 10

John Guest Acetal Copolymer Tube Fitting, Swivel Elbow, 3/8″ Tube OD x 1/4″ NPTF Male (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Swivel Elbow, 3/8″ Tube OD x 1/4″ NPTF Male (Pack of 10) - Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Working pressure of up to 150 psi. Push-to-connect fitting connects to pipes or tubing on one end and has an nptf male connector on the other. Swivel elbow for connecting two pipes at an angle, allowing one or more ends to rotate. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.

 

John Guest PASVPP5 Angle Stop Adapter Valve 12 x 38 x 14

John Guest PASVPP5 Angle Stop Adapter Valve, 1/2″ x 3/8″ x 1/4″

John Guest PASVPP5 Angle Stop Adapter Valve, 1/2″ x 3/8″ x 1/4″ - With capability to shut off water supply to dedicated line for easy filter replacements. All plastic adapter valve with conversion thread works on existing 3/8 compression or 1/2nps angle stop valve allowing access to water supply for reverse-osmosis systems, ice maker, automatic coffee equipment, etc.

 

John Guest Ice Maker Connection Kit

John Guest Ice Maker Connection Kit

John Guest Ice Maker Connection Kit - Ice maker connection kitconnects to your refrigerator in minutesfast and easy installationsbuilt in shut off valvelead freecarded.

 

John Guest PE-08-BI-025F-N LLDPE Tubing 25 Feet 14 Natural

John Guest PE-08-BI-025F-N LLDPE Tubing, 25 Feet, 1/4″, Natural

John Guest PE-08-BI-025F-N LLDPE Tubing, 25 Feet, 1/4″, Natural - It is suitable for a wide range of pressures and temperatures while providing substantial chemical resistance. John guest 1/4 inch od lldpe polyethylene tubing is ideal for use in a wide range of applications requiring low-temperature, flexibility, and durability. Lldpe can be used with most od tubing connectors including john guest push-to-connect fittings and valves. Common applications include water purification, reverse osmosis systems, ice makers and misting systems, car wash systems, home/office coffee and beverage dispensing equipment, and pneumatic lines.

 

John Guest CI321216FS Female Connector 38 x 34 BSP Pack of 10

John Guest CI321216FS Female Connector, 3/8″ x 3/4″ BSP (Pack of 10)

John Guest CI321216FS Female Connector, 3/8″ x 3/4″ BSP (Pack of 10) - Lead free. Quick connect/disconnect. Not suitable for air. Bsp metric threads. Use on poly or copper tube.

 

John Guest MI4508F4SLF Female Flare Connector 14 OD x 14 Pack of 10

John Guest MI4508F4SLF Female Flare Connector, 1/4″ OD x 1/4 (Pack of 10)

John Guest MI4508F4SLF Female Flare Connector, 1/4″ OD x 1/4 (Pack of 10) - Lead free brass pushfit female flare fitting threads onto male flare to provide permanent or removable leak free connection.

 

John Guest Blue 100 ftroll 14 Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE

John Guest Blue 100 ft/roll 1/4″ Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE

John Guest Blue 100 ft/roll 1/4″ Polyethylene Tube Tubing Drinking Water RO Reverse Osmosis DI Aquarium Pipe LLDPE - John guest blue 100 ft/roll 1/4″ polyethylene tube tubing.

 

John Guest Acetal Copolymer Tube Fitting Three Way Divider 12 Inlet x 38 Outlet Tube OD Pack of 10

John Guest Acetal Copolymer Tube Fitting, Three Way Divider, 1/2″ Inlet x 3/8″ Outlet Tube OD (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Three Way Divider, 1/2″ Inlet x 3/8″ Outlet Tube OD (Pack of 10) - Accepted by almost all the world’s beer and beverage producers and by the manufacturers of drinks dispense equipment, john guest products have quality and performance approvals from leading testing and acceptance authorities. All these fittings are produced in food and drug administration (fda) compliant materials and are therefore recommended for food quality applications. They are however equally suitable for air and inert gases and can be used on n2/co2 (installed in accordance with the british beer and pub association code of practice) mixed gas dispense lines and in pneumatic applications and vacuum. Iso 9001 and wras approved. Pi fittings in grey acetal copolymer, making them especially suitable for applications involving foodstuffs and potable liquids. Nsf 14, nsf 51, nsf 61 approved.

 

John Guest Tube Cutter for up to 12mm Tube

John Guest Tube Cutter for up to 12mm Tube

John Guest Tube Cutter for up to 12mm Tube - Sturdy plastic cutter with replaceable steel blades for providing square tube cuts on most poly tubing up to 12mm.

 

John Guest Acetal Copolymer Barbed Tube Fitting Stem 38 Stem OD x 14 Hose ID Pack of 10

John Guest Acetal Copolymer Barbed Tube Fitting, Stem, 3/8″ Stem OD x 1/4″ Hose ID (Pack of 10)

John Guest Acetal Copolymer Barbed Tube Fitting, Stem, 3/8″ Stem OD x 1/4″ Hose ID (Pack of 10) - Stem fitting inserts into tubing to connect pipes or tubes with different ends. Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Working pressure of up to 150 psi. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Stem fitting for connecting pipes or tubes in a straight line.

 

John Guest Acetal Copolymer Tube Fitting Straight Adaptor 14 Tube OD x 14 BSP Male Pack of 10

John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 1/4″ Tube OD x 1/4″ BSP Male (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Straight Adaptor, 1/4″ Tube OD x 1/4″ BSP Male (Pack of 10) - Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Straight adapter connects pipes or fittings of different types in a straight line. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Push-to-connect fitting connects to pipes or tubing on one end and has a bspt male connector on the other. Working pressure of up to 150 psi.

 

John Guest Speedfit KIT-ISRK Polypropylene Service and Repair Kit 1438 White

John Guest Speedfit KIT-ISRK Polypropylene Service and Repair Kit, 1/4″/3/8″, White

John Guest Speedfit KIT-ISRK Polypropylene Service and Repair Kit, 1/4″/3/8″, White - Fittings can be used on plastic or soft copper tubing. Lead-free, corrosion fee, non-toxic, and more chemically resistant than other plastics. Manufactured from white polypropylene fittings with an epdm o-ring. Kit includes 92 of the most popular 1/4-inch and 3/8-inch fittings. Manufactured with fda compliant materials.

 

John Guest Acetal Copolymer Tube Fitting Imperial Single Check Valve 38 Tube OD

John Guest Acetal Copolymer Tube Fitting, Imperial Single Check Valve, 3/8″ Tube OD

John Guest Acetal Copolymer Tube Fitting, Imperial Single Check Valve, 3/8″ Tube OD - Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Imperial single check valve to prevent flow reversal in a liquid piping system. Working pressure of up to 145 psi. Accepts nylon and polyurethane tube fittings. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.

 

John Guest Acetal Copolymer Tube Fitting Adaptor 38 Tube OD x 38 Flared Female Pack of 10

John Guest Acetal Copolymer Tube Fitting, Adaptor, 3/8″ Tube OD x 3/8″ Flared Female (Pack of 10)

John Guest Acetal Copolymer Tube Fitting, Adaptor, 3/8″ Tube OD x 3/8″ Flared Female (Pack of 10) - Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Working pressure of up to 150 psi. Adapter for connecting pipes or fittings of different types. Meets nsf/ansi standards 14, 51, and 61 for quality assurance. Push-to-connect fitting connects to pipes or tubing on one end and a flared female npt connector on the other.

 

John Guest PI451215CS Female Connector 38 OD x 58 BSPP Pack of 10

John Guest PI451215CS Female Connector, 3/8″ OD x 5/8″ BSPP (Pack of 10)

John Guest PI451215CS Female Connector, 3/8″ OD x 5/8″ BSPP (Pack of 10) - Pushfit female fitting threads onto bspp male to provide permanent or removable leak free connection.