Best 17 Tnmg 332s

 

Sandvik Coromant TNMG 332-QM 4315 Carbide Insert Pack of 10

Sandvik Coromant TNMG 332-QM 4315 Carbide Insert (Pack of 10)

Sandvik Coromant TNMG 332-QM 4315 Carbide Insert (Pack of 10) - 13° rake angle 005-012″ land at the corners, 13° and 9° angle 005-012″ land at the sides. Medium machining wide chip breaking range in steel, ductile and work hardening material. A cvd-coated carbide grade for finishing to roughing in applications with continuous cut to light intermittence of steel and steel castings. Equipped with inveio coating technology and is able to withstand high temperatures without sacrificing edge line security in wet and dry applications. T-max p carbide insert.

 

Dorian Tool HP-High Performance 0 Degrees ANSI Solid Carbide Negative General Purpose Insert DPC15HT CVD Multi Layer Coating TNMG Style UEM Chipbreaker TNMG-332-UEM 316 Thickness 0031 Nose Radius Pack of 10

Dorian Tool HP-High Performance 0 Degrees ANSI Solid Carbide Negative General Purpose Insert, DPC15HT, CVD Multi Layer Coating, TNMG Style, UEM Chipbreaker, TNMG-332-UEM, 3/16″ Thickness, 0.031″ Nose Radius (Pack of 10)

Dorian Tool HP-High Performance 0 Degrees ANSI Solid Carbide Negative General Purpose Insert, DPC15HT, CVD Multi Layer Coating, TNMG Style, UEM Chipbreaker, TNMG-332-UEM, 3/16″ Thickness, 0.031″ Nose Radius (Pack of 10) - Available in cvd, multi-layer of alumina, titanium carbonitride coating. Molded chip breaker, positive chip breaker geometry. For medium application of carbon and alloy steel, stainless steel, cast iron, with medium depth of cut and medium feed per revolution at high sfm (vc). Wear resistant, small honed cutting edge. Wet working condition, high positive rake angle.

 

Sandvik Coromant 2-TNMG 332-PR 4325 Indexable Carbide Turning Inserts Triangle Neutral Steel Pack of 2

Sandvik Coromant 2-TNMG 332-PR 4325 Indexable Carbide Turning Inserts, Triangle, Neutral, Steel (Pack of 2)

Sandvik Coromant 2-TNMG 332-PR 4325 Indexable Carbide Turning Inserts, Triangle, Neutral, Steel (Pack of 2) - T-max p carbide insert. Tnmg 16 04 08-pr 4325. Top and hole clamping. Carbide turning insert. Roughing.

 

12PCS NEW SANDVIK TNMG 332 MF 2025 CARBIDE INSERTS 16 04 08-MF MACHINE TOOLS

12PCS NEW SANDVIK TNMG 332 MF 2025 CARBIDE INSERTS 16 04 08-MF MACHINE TOOLS

12PCS NEW SANDVIK TNMG 332 MF 2025 CARBIDE INSERTS 16 04 08-MF MACHINE TOOLS - Thank youlocation = j inserts. Labeling on the packages readssandvic tnmg 16 04 08, mf 2025tnmg 332-mfplease see the picture for additional information or please feel free to send me any questions you have. Please email or call if you need same day shipping to verify that i see your payment. They are new. 937-475-3068 please see my other listings for more great valuesi will combine shipping on smaller orders. You get 12 inserts for your purchase price. Inserts not sold individually. Hello, you are purchasing the pictured 12pcs inserts. I usually (95% of the time) ship items paid for by 300 est the same day. I will ship worldwide.

 

Sandvik Coromant T-Max P Cermet Turning Insert TNMG Triangle QF Chipbreaker CT5015 Grade Uncoated TNMG 332-QF 38 iC 00315 Corner Radius Pack of 10

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, QF Chipbreaker, CT5015 Grade, Uncoated, TNMG 332-QF, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, QF Chipbreaker, CT5015 Grade, Uncoated, TNMG 332-QF, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10) - Negative double-sided insert has zero degree clearance and a strong edge for external turning. Ct5015 uncoated cermet carbide grade provides high wear resistance. Triangle shape is suitable for light roughing and finishing, and is used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. Designed for finish turning operations on steel in good machining conditions. Finishing (mf, pf, qf) chipbreaker styles reduce buildup of chips at a range of cutting depths and feed rates.

 

Sandvik Coromant T-Max P Carbide Turning Insert TNMG Triangle PF Chipbreaker GC4225 Grade Multi-Layer Coating TNMG 332-PF 38 iC 00315 Corner Radius Pack of 10

Sandvik Coromant T-Max P Carbide Turning Insert, TNMG, Triangle, PF Chipbreaker, GC4225 Grade, Multi-Layer Coating, TNMG 332-PF, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Carbide Turning Insert, TNMG, Triangle, PF Chipbreaker, GC4225 Grade, Multi-Layer Coating, TNMG 332-PF, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10) - Gc4225 grade is an mtcvd coating of titanium carbonitride (ticn), aluminum oxide (al2o3) and titanium nitride (tin) over carbide that provides a balance of resistance to shock and wear. Roughing (pr, mr), medium-machining (pm, qm, sm, groove), and finishing (pf, mf, qf, lc, l-k, r-k, 61) chipbreaker styles reduce buildup of chips at a range of cutting depths and feed rates. Negative double-sided insert has zero degree clearance and a strong edge for external turning. Designed for turning operations, from roughing to finishing, on steel in difficult to good machining conditions. Triangle shape is suitable for light roughing and finishing, and is used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required.

 

Sandvik Coromant MTJNL 2525M 16M1 Turning Insert Holder Square Shank Steel External Clamp Left Hand 25mm Width x 25mm Height Shank 150mm Length x 32mm Width TNMG 332 Insert Size

Sandvik Coromant MTJNL 2525M 16M1 Turning Insert Holder, Square Shank, Steel, External, Clamp, Left Hand, 25mm Width x 25mm Height Shank, 150mm Length x 32mm Width, TNMG 332 Insert Size

Sandvik Coromant MTJNL 2525M 16M1 Turning Insert Holder, Square Shank, Steel, External, Clamp, Left Hand, 25mm Width x 25mm Height Shank, 150mm Length x 32mm Width, TNMG 332 Insert Size - Sandvik coromant t-max p negative basic-shape inserts holder for high performance turning, stretching from small components to heavy machining. Precision nozzles and optimized geometries for high pressure coolant machining. The inserts fit into all sandvik coromant high performance holding systems and can be used in a variety of applications in all materials. Lever clamping for wet machining, rc-clamping for dry machining and short chip materials, wedge clamp for improved accessibility. Double sided inserts with strong edges. Geometries specifically designed for high pressure coolant.

 

Cobra Carbide 41048 Solid Carbide Turning Insert C520 Grade Uncoated Bright Finish TNMG Style TNMG 332 316 Thick 132 Radius Pack of 10

Cobra Carbide 41048 Solid Carbide Turning Insert, C520 Grade, Uncoated (Bright) Finish, TNMG Style, TNMG 332, 3/16″ Thick, 1/32″ Radius (Pack of 10)

Cobra Carbide 41048 Solid Carbide Turning Insert, C520 Grade, Uncoated (Bright) Finish, TNMG Style, TNMG 332, 3/16″ Thick, 1/32″ Radius (Pack of 10) - 0 degrees relief angle. Triangle with chipbreaker. General purpose grade designed for cast iron and non-ferrous materials. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Sandvik Coromant T-Max P Cermet Turning Insert TNMG Triangle LC Chipbreaker GC1525 Grade TiCN Coating TNMG 332-LC 38 iC 00315 Corner Radius Pack of 10

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, LC Chipbreaker, GC1525 Grade, TiCN Coating, TNMG 332-LC, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, LC Chipbreaker, GC1525 Grade, TiCN Coating, TNMG 332-LC, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10) - A pvd coated cermet. To be used when good surface quality is demanded at medium to high cutting speeds. Very high wear resistance and good edge toughness. For finishing and semi-finishing of low carbon and low alloyed steels.

 

Sandvik Coromant TNMG 332-LC         4325 Indexable Carbide Turning Inserts Triangle Neutral Steel Pack of 10

Sandvik Coromant TNMG 332-LC 4325 Indexable Carbide Turning Inserts, Triangle, Neutral, Steel (Pack of 10)

Sandvik Coromant TNMG 332-LC 4325 Indexable Carbide Turning Inserts, Triangle, Neutral, Steel (Pack of 10) - Tnmg 16 04 08-lc 4325. Finishing. Top and hole clamping. Carbide turning insert. T-max p carbide insert.

 

Sandvik Coromant TNMG 332-MMC 2025 Carbide Insert 0032 Nose Radius Negative Basic Shape Chip Breaker Pack of 10

Sandvik Coromant TNMG 332-MMC 2025 Carbide Insert, 0.032″ Nose Radius, Negative Basic Shape Chip Breaker (Pack of 10)

Sandvik Coromant TNMG 332-MMC 2025 Carbide Insert, 0.032″ Nose Radius, Negative Basic Shape Chip Breaker (Pack of 10) - Sandvik coromant tnmg 332-mmc 2025 t-max p carbide insert for machining stainless iso m25 applications mmc chipbreaker is designed for medium, high pressure coolant applications negative rake tools and 0 degree clearance inserts designed to be used in external turning application and in large bores.

 

Sandvik Coromant TNMG 332-PM 4315 Indexable Carbide Turning Inserts Triangle Neutral Steel Pack of 10

Sandvik Coromant TNMG 332-PM 4315 Indexable Carbide Turning Inserts, Triangle, Neutral, Steel (Pack of 10)

Sandvik Coromant TNMG 332-PM 4315 Indexable Carbide Turning Inserts, Triangle, Neutral, Steel (Pack of 10) - Top and hole clamping. T-max p carbide insert. Carbide turning insert. Medium. Tnmg 16 04 08-pm 4315.

 

Sandvik Coromant TNMG 332-XM GC30 Carbide Insert 0032 Nose Radius Negative Basic Shape Chip Breaker Pack of 10

Sandvik Coromant TNMG 332-XM GC30 Carbide Insert, 0.032″ Nose Radius, Negative Basic Shape Chip Breaker (Pack of 10)

Sandvik Coromant TNMG 332-XM GC30 Carbide Insert, 0.032″ Nose Radius, Negative Basic Shape Chip Breaker (Pack of 10) - Sandvik coromant tnmg 332-xm gc30 t-max p carbide insert for machining steel iso p25 applications xm chipbreaker is designed for medium applications negative rake tools and 0 degree clearance inserts designed to be used in external turning application and in large bores.

 

Sandvik Coromant TNMG 332-XF GC15 Carbide Insert 0032 Nose Radius Negative Basic Shape Chip Breaker Pack of 10

Sandvik Coromant TNMG 332-XF GC15 Carbide Insert, 0.032″ Nose Radius, Negative Basic Shape Chip Breaker (Pack of 10)

Sandvik Coromant TNMG 332-XF GC15 Carbide Insert, 0.032″ Nose Radius, Negative Basic Shape Chip Breaker (Pack of 10) - Sandvik coromant tnmg 332-xf gc15 t-max p carbide insert for machining stainless, hrsa iso m15, s15 applications xf chipbreaker is designed for finishing applications negative rake tools and 0 degree clearance inserts designed to be used in external turning application and in large bores.

 

Sandvik Coromant T-Max P Carbide Turning Insert TNMG Triangle MR Chipbreaker GC2025 Grade Multi-Layer Coating TNMG 332-MR 38 iC 00315 Corner Radius Pack of 10

Sandvik Coromant T-Max P Carbide Turning Insert, TNMG, Triangle, MR Chipbreaker, GC2025 Grade, Multi-Layer Coating, TNMG 332-MR, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Carbide Turning Insert, TNMG, Triangle, MR Chipbreaker, GC2025 Grade, Multi-Layer Coating, TNMG 332-MR, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10) - Roughing (mr, pr), medium-machining (mm, qm), and finishing (mf) chipbreaker styles reduce buildup of chips at a range of cutting depths and feed rates. Negative double-sided insert has zero degree clearance and a strong edge for external turning. Gc2025 grade is an mtcvd coating of titanium carbonitride (ticn), aluminum oxide (al2o3), and titanium nitride (tin) that provides a balance of resistance to shock and wear. Designed for turning operations, from roughing to finishing, on stainless steel in average machining conditions. Triangle shape is suitable for light roughing and finishing, and is used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required.

 

Ultra-Dex MTGNR 12-3B Steel Tool Holder to Hold a Negative TNMG 332 at 0 Degree Lead Right Hand No Coolant 0750 x 45 Square Shank

Ultra-Dex MTGNR 12-3B Steel Tool Holder to Hold a Negative TNMG 332 at 0 Degree Lead, Right Hand, No Coolant, 0.750″ x 4.5″ Square Shank

Ultra-Dex MTGNR 12-3B Steel Tool Holder to Hold a Negative TNMG 332 at 0 Degree Lead, Right Hand, No Coolant, 0.750″ x 4.5″ Square Shank - Cl-6 clamp. 13″ head length. Nl-34l pin. Xns-36 screw. Itsn-322 shim.

 

Sandvik Coromant T-Max P Cermet Turning Insert TNMG Triangle PF Chipbreaker CT5015 Grade Uncoated TNMG 332-PF 38 iC 00315 Corner Radius Pack of 10

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, PF Chipbreaker, CT5015 Grade, Uncoated, TNMG 332-PF, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10)

Sandvik Coromant T-Max P Cermet Turning Insert, TNMG, Triangle, PF Chipbreaker, CT5015 Grade, Uncoated, TNMG 332-PF, 3/8″ iC, 0.0315″ Corner Radius (Pack of 10) - Designed for finish turning operations on steel in good machining conditions. Ct5015 uncoated cermet carbide grade provides high wear resistance. Triangle shape is suitable for light roughing and finishing, and is used when there is limited machine power, a tendency toward vibration, or when either a large or small lead angle is required. Finishing (mf, pf, qf) chipbreaker styles reduce buildup of chips at a range of cutting depths and feed rates. Negative double-sided insert has zero degree clearance and a strong edge for external turning.