Best 23 Ear Clamps

 

Oetiker 10100024 Zinc-Plated Steel Hose Clamp Double Ear Clamp ID Range 15 mm Closed - 18 mm Open Pack of 25 #ad

Oetiker 10100024 Zinc-Plated Steel Hose Clamp, Double Ear, Clamp ID Range 15 mm (Closed) – 18 mm (Open) (Pack of 25)

Oetiker 10100024 Zinc-Plated Steel Hose Clamp, Double Ear, Clamp ID Range 15 mm (Closed) – 18 mm (Open) (Pack of 25) #ad - Genuine oetiker 2-ear clamps the ears of these clamps do not have a dimple and nearly double the clamping range, compared to the 1-ear clamp. The listed size of the clamp denotes the inner diameter (id) of the clamp. 14100387 oetiker hip single action standard jaw pincer, item no. The nipple), and then measure the outer diameter of the hose. The hip tools have been designed especially for pinching ear clamps quickly and easily. Oetiker hand clamp cutter, item no. 2 ears provide a degree of elasticity to accommodate changes in size of the parts being joined, such as that which may be caused by thermal expansion or vibration. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. The sizing references for pex clamps are not the same as standard oetiker clamps. How to install these clamps can be easily installed using oetiker hand installation pincers (hip). G. 14100396 how to remove ear clamps can be easily removed using oetiker’s hand clamp cutter (hcc). The hcc tool is designed to safely remove ear clamps. Oetiker pex clamps should be used for pex applications. 14100407 please note the clamps included in this kit are not designed or intended for use in pex applications. 14100386 oetiker hip compound action side jaw pincer, item no. Clamp diameter the following applies as a guideline to determine the correct clamp diameter, push the hose onto the attaching material, (e. Oetiker hip compound action, standard jaw pincer, item no.

 

Oetiker 16700026 Stepless Ear Clamp One Ear 7 mm Band Width Clamp ID Range 194 mm Closed - 226 mm Open Pack of 25 #ad

Oetiker 16700026 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 19.4 mm (Closed) – 22.6 mm (Open) (Pack of 25)

Oetiker 16700026 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 19.4 mm (Closed) – 22.6 mm (Open) (Pack of 25) #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker clamps. 360° stepless design, no steps or gaps on inner circumference. Narrow band, concentrated seal compression. Please note, the size of the clamp denotes the inner dimension (id) of the clamp.

 

WGCD 80 PCS Stainless Steel Single Ear Hose Clamps with Ear Clamp Pincer Kit 7-21mm #ad

WGCD 80 PCS Stainless Steel Single Ear Hose Clamps with Ear Clamp Pincer Kit, 7-21mm

WGCD 80 PCS Stainless Steel Single Ear Hose Clamps with Ear Clamp Pincer Kit, 7-21mm #ad - High quality hose clamps, made of 304 stainless steel, anti-corrosion, size range 7-21mm ( inner dimension ). 1 ear hose clamps, unique points of edge grinding process, ensure the clamp the strip edge smooth. Ear clamp pincer crimping plier tool, with plastic coated handle, applied to ear hose clamps, stepless clamps, double ear clamps and other clamps. 7 kinds of hose clamps, packed in a clear plastic box, easy to install and store, suits for fuel filters, water pump and other machinery equipment. Single ear hose clamps and ear clamp plier kit, suits for securing pipe hoses and automotive use.

 

Oetiker Stepless OET070157-60PCK Clamp Assortment Case Ear Clamps Single Ear Hose Clamps without Pincers 14- 58 Pack of 60 #ad

Oetiker Stepless OET070157-60PCK Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps without Pincers, 1/4″- 5/8″ (Pack of 60)

Oetiker Stepless OET070157-60PCK Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps without Pincers, 1/4″- 5/8″ (Pack of 60) #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker® clamps, 10 each of 1/4″(70 mm), 3/8″ (95 mm), 7/16″ (113 mm), 1/2″ (133 mm), 9/16″ (145 mm) and 5/8″(157 mm). Please note, the size of the clamp denotes the inner dimension (id) of the clamp. 360° stepless® design, no steps or gaps on inner circumference. Narrow band, concentrated seal compression.

 

Oetiker Stepless OET105271-80PCK Clamp Assortment Case Ear Clamps Single Ear Hose Clamps without Pincers 1332- 1 Pack of 80 #ad

Oetiker Stepless OET105271-80PCK Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps without Pincers, 13/32″- 1″ (Pack of 80)

Oetiker Stepless OET105271-80PCK Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps without Pincers, 13/32″- 1″ (Pack of 80) #ad - Please note, the size of the clamp denotes the inner dimension (id) of the clamp. 360° stepless® design, no steps or gaps on inner circumference. Narrow band, concentrated seal compression. Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker® clamps, 10 each of 105 mm, 123 mm, 145 mm, 162 mm, 185 mm, 210 mm, 241 mm and 271 mm.

 

Oetiker 16700046 Stepless Ear Clamp One Ear 7 mm Band Width Clamp ID Range 329 mm Closed - 361 mm Open Pack of 10 #ad

Oetiker 16700046 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 32.9 mm (Closed) – 36.1 mm (Open) (Pack of 10)

Oetiker 16700046 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 32.9 mm (Closed) – 36.1 mm (Open) (Pack of 10) #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. 360° stepless design, no steps or gaps on inner circumference. Narrow band, concentrated seal compression. Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Genuine oetiker clamps.

 

10 99 I220 Ear Clamp Pliers 8 66 with Side Jaw #ad

10 99 I220 Ear Clamp Pliers 8, 66″ with Side Jaw

10 99 I220 Ear Clamp Pliers 8, 66″ with Side Jaw #ad - For the simple and reliable mounting of 1-ear and 2-ear clamps (oetiker system or similar). Especially suitable for universal use thanks to the additional side jaw. Versatile use for clamps on cv boots, cooler and fuel lines, air pressure systems, compressors.

 

PEX Ear Clamp Removal Tool #ad

PEX Ear Clamp Removal Tool

PEX Ear Clamp Removal Tool #ad - Specially designed for removing ear clamps. 8 mm band thickness. Steel band cut clamps up to 9. 0 mm wide x 0. 6 mm band thickness. Oetiker hand clamp cutter, item no. 0 mm wide x 0. The hcc tool is designed to safely remove ear clamps. 8 mm band thickness. 0 mm wide x 0. Stainless steel band cut clamps up to 7. Stainless steel band cut clamps up to 9. The hand clamp cutter hcc 2000 | 407 will cut the following ear clamps up to the band width and thicknesses listed. 14100407 ear clamps can be easily removed using oetiker’s hand clamp cutter (hcc).

 

Oetiker 18500060 StepLess 1-Ear Clamp Kit StepLess Ear Clamps stainless steel with standard jaw single action  pincer #ad

Oetiker 18500060 StepLess 1-Ear Clamp Kit (StepLess Ear Clamps, stainless steel with standard jaw single action pincer)

Oetiker 18500060 StepLess 1-Ear Clamp Kit (StepLess Ear Clamps, stainless steel with standard jaw single action pincer) #ad - 7mm stepless 1-ear clamps 10 23/32″/18. This oetiker 18500060 stepless one-ear clamp kit contains stainless steel stepless one-ear clamps and a pair of standard jaw pincers for clamping hose clamps in a variety of diameters. Hose clamps attach tubing and hoses to fittings to prevent flow leakage, or are used for hose or wire mounting applications. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. The dimple or indentation on the ear of the clamp increases the clamping force for a more secure hold, and the mechanical interlock of this clamp keeps it securely closed and provides better corrosion resistance than a spot-weld, which is vulnerable to corrosion. What’s in the box 10 1/2″/13. Oetiker manufactures hose clamps, rings, couplings, conveyor chains, hinged belts, and other connecting parts and accessories. The ear clamps are stainless steel for resisting scaling and corrosion for at least 1000 hours of exposure to salt spray in compliance with deutsches institut für normung-english international organization for standardization (din en iso) standard 9227. 5mm stepless 1-ear clamps 10 7/8″/22. 5mm stepless 1-ear clamps 10 5/8″/15. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications. 6mm stepless 1-ear clamps 1 pair standard jaw pincers instructions. 6mm stepless 1-ear clamps 10 1″/25. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. 3mm stepless 1-ear clamps 10 9/16″/14. The company, founded in 1942 and headquartered in horgen, switzerland, meets international organization for standardization/technical specification (iso/ts) standard 16949. 6mm stepless 1-ear clamps 10 1-1/4″/31. 6mm stepless 1-ear clamps 10 1-1/8″/28. This clamp kit is suitable for attaching a variety of hoses to fittings or other devices in various industrial applications, such as heavy machinery, hydraulics, irrigation, food processing, automobile manufacturing, and petroleum industries, among others.

 

Oetiker Stepless OET070170-300PCK Clamp Assortment Case Single Ear Hose Clamps without Pincers 14 - 1116 #ad

Oetiker Stepless OET070170-300PCK Clamp Assortment Case, Single Ear Hose Clamps without Pincers, 1/4″ – 11/16″

Oetiker Stepless OET070170-300PCK Clamp Assortment Case, Single Ear Hose Clamps without Pincers, 1/4″ – 11/16″ #ad - Lightweight design and tampering is visible. Genuine oetiker clamps, 50 each of 1/4″ (70 mm), 13/32″ (105 mm), 7/16″ (113 mm), 1/2″ (133 mm), 5/8″(157 mm) and 11/16″ (170 mm). Narrow band, concentrated seal compression. 360° stepless design, no steps or gaps on inner circumference. Specially formed strip edges reduce the risk of damage to the part being clamped.

 

Oetiker 16704963 StepLess Ear Clamp One Ear 7 mm Band Width Clamp ID Range 344 mm Closed - 376 mm Open Pack of 100 #ad

Oetiker 16704963 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 34.4 mm (Closed) – 37.6 mm (Open) (Pack of 100)

Oetiker 16704963 StepLess Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 34.4 mm (Closed) – 37.6 mm (Open) (Pack of 100) #ad - Specially formed strip edges reduced risk of damage to parts being clamped. Dimple increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion. Narrow band concentrates transmission of clamping force, less weight. Clamp ear compensates for component tolerances, adjustable surface pressure. 360° stepless® uniform 360° compression and uniform surface pressure.

 

Oetiker 16700016 Stepless Ear Clamp One Ear Clamp ID Range 132 mm Closed - 157 mm Open Pack of 50 #ad

Oetiker 16700016 Stepless Ear Clamp, One Ear, Clamp ID Range 13.2 mm (Closed) – 15.7 mm (Open) (Pack of 50)

Oetiker 16700016 Stepless Ear Clamp, One Ear, Clamp ID Range 13.2 mm (Closed) – 15.7 mm (Open) (Pack of 50) #ad - Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Genuine oetiker clamps. Narrow band, concentrated seal compression. 360° stepless design, no steps or gaps on inner circumference. Specially formed strip edges reduce the risk of damage to the part being clamped.

 

Oetiker 16702493 Stepless Ear Clamp One Ear 7 mm Band Width Clamp ID Range 103 mm Closed - 128 mm Open Pack of 10 #ad

Oetiker 16702493 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.3 mm (Closed) – 12.8 mm (Open) (Pack of 10)

Oetiker 16702493 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.3 mm (Closed) – 12.8 mm (Open) (Pack of 10) #ad - 360° stepless design, no steps or gaps on inner circumference. Genuine oetiker clamps. Specially formed strip edges reduce the risk of damage to the part being clamped. Narrow band, concentrated seal compression. Please note, the size of the clamp denotes the inner dimension (id) of the clamp.

 

Knipex Tools 10 99 i220 875 Ear Clamp Pliers #ad

Knipex Tools 10 99 i220 8.75″ Ear Clamp Pliers

Knipex Tools 10 99 i220 8.75″ Ear Clamp Pliers #ad - High-grade special tool steel forged, oil-hardened. An additional side jaw for easy clamping at degree angle to ear clamp when space is limited. Durable and strong for long life. For clamps on cv boots, coolant and fuel lines, air pressure systems, compressors. Suitable for simple and reliable clamping of 1-ear and 2-ear clamps without damaging the press points.

 

Oetiker Stepless OET070157-50PCK Clamp Assortment Case Ear Clamps Single Ear Hose Clamps without Pincers 14- 58 Pack of 50 #ad

Oetiker Stepless OET070157-50PCK Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps without Pincers, 1/4″- 5/8″ (Pack of 50)

Oetiker Stepless OET070157-50PCK Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps without Pincers, 1/4″- 5/8″ (Pack of 50) #ad - 360° stepless® design, no steps or gaps on inner circumference. Genuine oetiker® clamps, 10 each of 1/4″(70 mm), 3/8″ (95 mm), 7/16″ (113 mm), 1/2″ (133 mm), and 5/8″(157 mm). Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped. Narrow band, concentrated seal compression.

 

Oetiker 16702492 Stepless Ear Clamp One Ear 5 mm Band Width Clamp ID Range 92 mm Closed - 109 mm Open Pack of 25 #ad

Oetiker 16702492 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 9.2 mm (Closed) – 10.9 mm (Open) (Pack of 25)

Oetiker 16702492 Stepless Ear Clamp, One Ear 5 mm Band Width, Clamp ID Range 9.2 mm (Closed) – 10.9 mm (Open) (Pack of 25) #ad - Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Narrow band, concentrated seal compression. Genuine oetiker clamps. 360° stepless design, no steps or gaps on inner circumference. Specially formed strip edges reduce the risk of damage to the part being clamped.

 

Oetiker 16700020 Stepless Ear Clamp One Ear 7 mm Band Width Clamp ID Range 153 mm Closed - 185 mm Open Pack of 100 #ad

Oetiker 16700020 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 15.3 mm (Closed) – 18.5 mm (Open) (Pack of 100)

Oetiker 16700020 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 15.3 mm (Closed) – 18.5 mm (Open) (Pack of 100) #ad - Hose clamps attach tubing and hoses to fittings to prevent flow leakage, or are used for hose or wire mounting applications. Hose clamps are suitable for a large number of industries, and commonly used in industrial, electronic, and automotive applications. This clamp is suitable for attaching hoses to fittings or other devices for applications such as food processing and commercial fishing that involve exposure to corrosive elements, particularly salt water. The ear is visibly deformed when clamped correctly, providing assurance of proper closure. This oetiker 167 series stainless steel stepless one-ear hose clamp is for clamping hoses. The dimple or indentation on the ear of the clamp increases the clamping force for a more secure hold, and the mechanical interlock of this clamp keeps it securely closed and provides better corrosion resistance than a spot-weld, which is vulnerable to corrosion. It’s also made of stainless steel for resisting scaling and corrosion. Other hose clamp types are used for mounting, strapping, clamping, and positioning hose or wire. Oetiker manufactures hose clamps, rings, couplings, conveyor chains, hinged belts, and other connecting parts and accessories. They come in a variety of designs to distribute uniform pressure over the circumference of hoses to bind them to fittings. The company, founded in 1942 and headquartered in horgen, switzerland, meets international organization for standardization/technical specification (iso/ts) standard 16949.

 

Oetiker 16700006 Stepless Ear Clamp One Ear Clamp ID Range 88 mm Closed - 105 mm Open Pack of 10 #ad

Oetiker 16700006 Stepless Ear Clamp, One Ear, Clamp ID Range 8.8 mm (Closed) – 10.5 mm (Open) (Pack of 10)

Oetiker 16700006 Stepless Ear Clamp, One Ear, Clamp ID Range 8.8 mm (Closed) – 10.5 mm (Open) (Pack of 10) #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Genuine oetiker clamps. Narrow band, concentrated seal compression. 360° stepless design, no steps or gaps on inner circumference.

 

Oetiker Stepless OET162210-50PCK-EP Clamp Assortment Case Ear Clamps Single Ear Hose Clamps with Pincers 58-1316 Pack of 50 #ad

Oetiker Stepless OET162210-50PCK-EP Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps with Pincers, 5/8″-13/16″ (Pack of 50)

Oetiker Stepless OET162210-50PCK-EP Clamp Assortment Case, Ear Clamps, Single Ear Hose Clamps with Pincers, 5/8″-13/16″ (Pack of 50) #ad - Specially formed strip edges reduce the risk of damage to the part being clamped. 360° stepless® design, no steps or gaps on inner circumference. Narrow band, concentrated seal compression. Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Genuine oetiker® clamps, 10 each of 5/8″ (162 mm), 11/16″ (17 mm), 23/32″ (185 mm), 3/4″ (198 mm), and 13/16″ (21 mm).

 

Oetiker 16700010 Stepless Ear Clamp One Ear 7 mm Band Width Clamp ID Range 108 mm Closed - 133 mm Open Pack of 50 #ad

Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) – 13.3 mm (Open) (Pack of 50)

Oetiker 16700010 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 10.8 mm (Closed) – 13.3 mm (Open) (Pack of 50) #ad - 360° stepless design, no steps or gaps on inner circumference. Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Narrow band, concentrated seal compression. Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker clamps.

 

Oetiker 16700016 Stepless Ear Clamp One Ear Clamp ID Range 132 mm Closed - 157 mm Open Pack of 10 #ad

Oetiker 16700016 Stepless Ear Clamp, One Ear, Clamp ID Range 13.2 mm (Closed) – 15.7 mm (Open) (Pack of 10)

Oetiker 16700016 Stepless Ear Clamp, One Ear, Clamp ID Range 13.2 mm (Closed) – 15.7 mm (Open) (Pack of 10) #ad - Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped. Genuine oetiker clamps. Narrow band, concentrated seal compression. 360° stepless design, no steps or gaps on inner circumference.

 

Didamx 74Pcs 7-21mm Stainless Steel 304 Single Ear Hose Clamps Assortment Kit #ad

Didamx 74Pcs 7-21mm Stainless Steel 304 Single Ear Hose Clamps Assortment Kit

Didamx 74Pcs 7-21mm Stainless Steel 304 Single Ear Hose Clamps Assortment Kit #ad - 10pcs id. 15. 8pcs id. 8. 10pcs id. 5mm. 10. 8pcs id. 10pcs id. 15pcs id. 7mm. 19. 21mm. 8mm. 15pcs. 18. 8mm. 8pcs id. Package included id. 12. 3mm. 7mm. 5mm.

 

Oetiker 16700035 Stepless Ear Clamp One Ear 7 mm Band Width Clamp ID Range 254 mm Closed - 286 mm Open Pack of 25 #ad

Oetiker 16700035 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 25.4 mm (Closed) – 28.6 mm (Open) (Pack of 25)

Oetiker 16700035 Stepless Ear Clamp, One Ear, 7 mm Band Width, Clamp ID Range 25.4 mm (Closed) – 28.6 mm (Open) (Pack of 25) #ad - Genuine oetiker clamps. 360° stepless design, no steps or gaps on inner circumference. Narrow band, concentrated seal compression. Please note, the size of the clamp denotes the inner dimension (id) of the clamp. Specially formed strip edges reduce the risk of damage to the part being clamped.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.