Best 24 Aluminum Hoses

 

Vestil WR-24-BRN Extruded Aluminum Hose and Crossover 2500 lb Single Wheel Capacity 24 Length 2-78 Width 716 Height Brown

Vestil WR-24-BRN Extruded Aluminum Hose and Crossover, 2500 lb. Single Wheel Capacity, 24″ Length, 2-7/8″ Width, 7/16″ Height, Brown

Vestil WR-24-BRN Extruded Aluminum Hose and Crossover, 2500 lb. Single Wheel Capacity, 24″ Length, 2-7/8″ Width, 7/16″ Height, Brown - Vestil wr-24-brn extruded aluminum hose and cable bridge is designed to protect air lines, electrical cords and computer cables from damage by fork trucks, carts, and personnel. These ramps have serrated edges for maximum traction and are lightweight for easy portability.

 

Dixon FAB150 Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 1-12 NPSM Female x 1-12 Hose ID Barbed

Dixon FAB150 Aluminum Hose Fitting, King Short Shank Suction Coupling with Brass Nut, 1-1/2″ NPSM Female x 1-1/2″ Hose ID Barbed

Dixon FAB150 Aluminum Hose Fitting, King Short Shank Suction Coupling with Brass Nut, 1-1/2″ NPSM Female x 1-1/2″ Hose ID Barbed - Brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Rubber gasket for high elasticity and resistance to abrasion and impact forces. Coupling for connecting two hoses or pipes with the same diameter in a straight run. Connects to a hose on one end and an npsm male connector on the other. Aluminum for lighter weight and resistance to corrosion and tarnishing.

 

Dixon 12 Global Aluminum Hose Shank x Male Adapter G50-E-AL

Dixon 1/2″ Global Aluminum Hose Shank x Male Adapter (G50-E-AL)

Dixon 1/2″ Global Aluminum Hose Shank x Male Adapter (G50-E-AL) - Made to dixon specifications and branded dixon. Designed to interchange with all products produced to a-a-59326d.

 

6AN Flare Hose Barb Fittings Aluminum -6 AN Male to 38 38 inch 952mm OD Push On Barb Fuel Line Pipe Connector 916-18 JIC 6 Thread Blue Anodized

6AN Flare Hose Barb Fittings Aluminum -6 AN Male to 3/8″ 3/8 inch 9.52mm OD Push On Barb Fuel Line Pipe Connector, 9/16-18 JIC 6 Thread Blue Anodized

6AN Flare Hose Barb Fittings Aluminum -6 AN Male to 3/8″ 3/8 inch 9.52mm OD Push On Barb Fuel Line Pipe Connector, 9/16-18 JIC 6 Thread Blue Anodized - Fitting diameter -6 an (9/16″x18) male to 3/8″ barb (952mm). Jic an male flare thread to push on / lock hose barb reusable pipe fitting connector / adapter. Made of high performance lightweight 6061-t6 billet aluminum material. Universal fit such as oil/ fuel/ water/ fluid with an -6 to barb 3/8. Blue anodized finish for durability.

 

BrandTech 662532 Aluminum Hose Nipple Flange 19mm Size For VACUUBRAND XS Series Rotary Vane Pump

BrandTech 662532 Aluminum Hose Nipple Flange, 19mm Size, For VACUUBRAND XS Series Rotary Vane Pump

BrandTech 662532 Aluminum Hose Nipple Flange, 19mm Size, For VACUUBRAND XS Series Rotary Vane Pump - Brandtech # 662532. This small, aluminum, kf25 to 19mm flange with hose nipple is designed for use with the vacuubrand xs series rotary vane pump. Inlet and outlet centering and clamping rings are included. Type nipple. Size 19mm. Per each. It fits rz9 inlets and outlets. Material aluminum.

 

Dixon Valve DHR1 Aluminum Hung Up On Single Hose Rack 19-12 Length x 6 Width x 9-316 Height

Dixon Valve DHR1 Aluminum Hung Up On Single Hose Rack, 19-1/2″ Length x 6″ Width x 9-3/16″ Height

Dixon Valve DHR1 Aluminum Hung Up On Single Hose Rack, 19-1/2″ Length x 6″ Width x 9-3/16″ Height - Five pre-drilled 5/16″ holes can be used to mount it to the wall or to mount the racks face to face for more hose capacity. This dixon dhr1 aluminum hose rack measures 9-3/16 x 6 x 19-1/2 inches (h x w x d), weighs 3. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. 4 lb, and is suitable for use with fire or water hose. Its aluminum construction provides corrosion and abrasion resistance and light weight. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. The company, founded in 1916, is headquartered in chestertown, md. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.

 

Aluminum Pin Lug Connector Hose Shank for Lay Flat and Suction Hoses 2 Dia - CLPL-200-AB

Aluminum Pin Lug Connector Hose Shank for Lay Flat and Suction Hoses (2″ Dia.) – CLPL-200-AB

Aluminum Pin Lug Connector Hose Shank for Lay Flat and Suction Hoses (2″ Dia.) – CLPL-200-AB - Male and female ends are made of aluminum, and the female end has brass swivel nut. They are normally used on the ends of a suction hose or lay flat discharge hose. Specially designed for high tensile strength, lightness and rigidity. Our pin lug couplings come complete with male and female shanks in nst threads. This aluminum hose shank pin lug connector set is made from an aluminum alloy with brass swivel.

 

11300001 Elkhart Brass Model A-327A Female to Male Aluminum Hose Adapter -

11300001 Elkhart Brass Model A-327A Female to Male Aluminum Hose Adapter -

11300001 Elkhart Brass Model A-327A Female to Male Aluminum Hose Adapter - - Durable female to male adapter made of lightweight elk-o-lite. 5″ nht female inlet and 1. 5″ nht male outlet. Hard anodized aluminum finish. Features 2. Equipped with rocker lugs.

 

Daphot Store - AN 6 Enforced Fittings Anoized Aluminum Hose End AN6 45 Degree Fitting Reusable Hose End Oil Fuel Line Adapter

Daphot Store – AN 6 Enforced Fittings Anoized Aluminum Hose End AN6 45 Degree Fitting Reusable Hose End Oil Fuel Line Adapter

Daphot Store – AN 6 Enforced Fittings Anoized Aluminum Hose End AN6 45 Degree Fitting Reusable Hose End Oil Fuel Line Adapter - 52mm. Material aluminum ✔5. Which corresponds to the inner diameter of the tubing were 5. 11mm, 14. Package includes 1 x hose end. ✔3. 59mm,8. Product name an 6 enforced hose end 45 degree ✔2. Application apply to cars with turbo modification, installation of the oil cooling radiator connections. ✔8. 2mm,17. ✔therefore, when purchasing products, be sure to pay attention to the inner diameter of the tubing. Color red / blue ✔6. Applicable models generic models ✔7. Size an 6 ✔an4,an6, an8, an10,an12 not means 4mm,6mm, 8mm, 10mm,12mm. ✔1. Products angle 45 degree ✔4. 7mm, 11.

 

Rodac 20480Rqn9060 Aluminum Hose Holder Length 186Mm Thickness 20480Rqn9060

Rodac 20480Rqn9060, Aluminum Hose Holder, Length: 186Mm, Thickness: 20480Rqn9060

Rodac 20480Rqn9060, Aluminum Hose Holder, Length: 186Mm, Thickness: 20480Rqn9060 - Rodac 20480rqn9060, aluminum hose holder, small, length 186mm, thickness 57mm, height 75mm,.

 

Vestil WR-48 Extruded Aluminum Hose and Crossover 2500 lbs Single Wheel Capacity 48 Length 2-78 Width 716 Height

Vestil WR-48 Extruded Aluminum Hose and Crossover, 2500 lbs Single Wheel Capacity, 48″ Length, 2-7/8″ Width, 7/16″ Height

Vestil WR-48 Extruded Aluminum Hose and Crossover, 2500 lbs Single Wheel Capacity, 48″ Length, 2-7/8″ Width, 7/16″ Height - Measures 48″ length by 2-7/8″ width by 7/16″ height. These ramps have serrated edges for maximum traction and are lightweight for easy portability. Designed to protect air lines, electrical cords and computer cables from damage by fork trucks, carts, and personnel. 1-1/4″ width by 5/16″ height usable span.

 

6 inch Air Duct by 12 Feet Abuff Flexible 4-Layers Aluminum Hose Duct with 2 Screw Clamps Great as HVAC Duct Clothes Dryer Duct Air Duct and Dryer Vent Tube

6 inch Air Duct by 12 Feet, Abuff Flexible 4-Layers Aluminum Hose Duct with 2 Screw Clamps Great as HVAC Duct, Clothes Dryer Duct, Air Duct and Dryer Vent Tube

6 inch Air Duct by 12 Feet, Abuff Flexible 4-Layers Aluminum Hose Duct with 2 Screw Clamps Great as HVAC Duct, Clothes Dryer Duct, Air Duct and Dryer Vent Tube - Thick layer of grey pvc on this ducting prevents light leaks and repels heat from your light fixtures to keep the air cool works with exhaust and intake fans, carbon filters and hooded lights. 6 inch pvc duct hose made of extra strength 4-layers, aluminum foil + pet + aluminum foil and outer grey layer (pvc) ensure working on -22 to 266℉ environment. 6 inch air duct is super flexible and easy to install, it will slide right on your duct fan, vent exhaust, carbon filter and light reflector package include a pair of 6 inch clamps to make the installation tight. 6″ diameter with adjustable length, this duct hose is 6 inches in diameter, 12 feet long and 2 x hose clamps, which can be cut into many pieces as you need by using a wire cutter and a paper knife. 6 inch dryer vent has wide variety of applications in ductwork system, heat filters, cafeteria, bakery, pharmacy, medical rooms, air conditioner, allergy room, bathroom, greenhouse, tent grow room, air tight system and stove vent, circulating the atmosphere, air-conditioning the flow, removing heat from an enclosure, distributes co2, increases temperature & humidity levels and etc.

 

Vestil FHCR-24-48-16 Fabricated Aluminum Hose and Crossover 38 Thick 16 Usable Span Width 2000 lb Capacity 48 Length 24 Width 3375 Height

Vestil FHCR-24-48-16 Fabricated Aluminum Hose and Crossover, 3/8″ Thick, 16″ Usable Span Width, 2000 lb Capacity, 48″ Length, 24″ Width, 3.375″ Height

Vestil FHCR-24-48-16 Fabricated Aluminum Hose and Crossover, 3/8″ Thick, 16″ Usable Span Width, 2000 lb Capacity, 48″ Length, 24″ Width, 3.375″ Height - Vestil fhcr-24-48-16 fabricated aluminum hose & cable bridge protects hoses and cables from carts and other traffic constructed of lightweight durable aluminum tread plate. All welded. 24″ x 48″, 2000 pound capacity, 3/8″ thick, usable span width 16″, usable span height 3″, opening span 4″, 16″.

 

North American Fire Hose P525X50PEN Corporation Single Jacket Fire Hose White 2-12 ID 50 750 psi Burst Pressure M x F NST Aluminum Connectors 600 psi PolyesterRubberAluminum

North American Fire Hose P525X50PEN Corporation Single Jacket Fire Hose, White, 2-1/2″ ID, 50′, 750 psi Burst Pressure, M x F NST Aluminum Connectors, 600 psi, Polyester/Rubber/Aluminum

North American Fire Hose P525X50PEN Corporation Single Jacket Fire Hose, White, 2-1/2″ ID, 50′, 750 psi Burst Pressure, M x F NST Aluminum Connectors, 600 psi, Polyester/Rubber/Aluminum - Poly 500-s has a 100% polyester jacket with a high grade single ply extruded epdm rubber lining. White color. The hose can be purchased plain white or with the optional ultra-shield which coats the outside jacket thoroughly, impregnated with a high tech polyurethane abrasion/moisture resistant. It is designed for emergency fire protection with water pressures not exceeding 225 psi per nfpa 1961. This hose is totally immune to the effects of mildew.

 

12 Solder Cup or MNPT Aluminum Hose Bibb Standard - 6PDZ4

1/2″ Solder Cup or MNPT Aluminum Hose Bibb, Standard – 6PDZ4

1/2″ Solder Cup or MNPT Aluminum Hose Bibb, Standard – 6PDZ4 - ▲ Made of lightweight aluminum,high strength and good durability. ▲ polished and anodized for bright appearance and corrosion protection. ▲ Protect fittings when installation. ▲ Thanks for your encouraging review and feedback it really increases our service level and passion of work incase you meet problem with our products, please contact us first before you give feedback and review we will assure you will get the best solution and service. ▲ Adjustable an3 an4 an6 an8 an10 an12.

 

Goodyear Engineered Products DP300-50CE-G Spiraflex Blue PVC SuctionDischarge Hose Assembly 3 Aluminum Cam And Groove Connection 55 PSI Maximum Pressure 50 Length 3 ID

Goodyear Engineered Products DP300-50CE-G Spiraflex Blue PVC Suction/Discharge Hose Assembly, 3″ Aluminum Cam And Groove Connection, 55 PSI Maximum Pressure, 50′ Length, 3″ ID

Goodyear Engineered Products DP300-50CE-G Spiraflex Blue PVC Suction/Discharge Hose Assembly, 3″ Aluminum Cam And Groove Connection, 55 PSI Maximum Pressure, 50′ Length, 3″ ID - Blue pvc compound tube and cover for flexibility. Extra light duty water discharge hose for applications in mining, construction, industry, agricultural and marine service. Aluminum cam and groove couplings. Temperature range of -10 to +150 degrees f (-23 to +66 degrees c). Synthetic fabric reinforcement for strength.

 

Dixon  CAB150N Aluminum Hose Fitting Complete King Short Suction Coupling Set with Brass Nut 1-12 NST x 1-12  Hose ID Barbed

Dixon CAB150N Aluminum Hose Fitting, Complete King Short Suction Coupling Set with Brass Nut, 1-1/2″ NST x 1-1/2″ Hose ID Barbed

Dixon CAB150N Aluminum Hose Fitting, Complete King Short Suction Coupling Set with Brass Nut, 1-1/2″ NST x 1-1/2″ Hose ID Barbed - Brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Connects to a hose on both ends. Coupling for connecting two hoses or pipes with the same diameter in a straight run. Rubber gasket for high elasticity and resistance to abrasion and impact forces. Aluminum for lighter weight and resistance to corrosion and tarnishing.

 

Dixon Valve DHR2 Aluminum Hung Up On Double Hose Rack 19-12 Length x 12 Width x 9-316 Height

Dixon Valve DHR2 Aluminum Hung Up On Double Hose Rack, 19-1/2″ Length x 12″ Width x 9-3/16″ Height

Dixon Valve DHR2 Aluminum Hung Up On Double Hose Rack, 19-1/2″ Length x 12″ Width x 9-3/16″ Height - Have 5 pre-drilled 5/16″ mounting holes. Aluminum rack can be easily mounted. Can be used for fire or water hose. Two racks can be bolted face to face to create extra hose capacity. Measures 19-1/2″ length x 12″ width x 9-3/16″ height.

 

Aluminum Hose Barb for Fuel Tank Fitting Adapter Connector AN6-516

Aluminum Hose Barb for Fuel Tank Fitting Adapter Connector AN6-5/16

Aluminum Hose Barb for Fuel Tank Fitting Adapter Connector AN6-5/16 - Applicable to fuel tanks and fuel cells eliminates 2 additional fittings from being needed to run fuel to the bulkhead. 6an male flare bulkhead to 5/16 hose barb fuel tank fitting an6, 5/16. High-quality aluminum material, cnc precision machining. Designed to provide a anti-leaking seal for any manufactures fittings. Silver anode surface, beautiful and durable.

 

SAMSON 506222 506 Series Single Arm Aluminum Oil Hose Reel 50 x 121500 psi

SAMSON 506222 506 Series Single Arm, Aluminum Oil Hose Reel, 50′ x 1/2″,1500 psi

SAMSON 506222 506 Series Single Arm, Aluminum Oil Hose Reel, 50′ x 1/2″,1500 psi - Hose reels with hose include 30″ inlet hose. Aluminum base and guide arm provide the rigidity to withstand the most demanding applications while offering a reduced weight for easy installation. Spool mounted on two permanently lubricated and sealed ball bearings to reduce torque load on spring for smooth retraction and longer life. Large guide latching area for easier operation. 506 series single arm aluminum hose reel. Fatigue resistant steel spring for years of durable performance and even load when pulling and recoiling the hose. Six roller guide outlet prevents hose pinching and reduces friction. Aluminum base and arms with composite spool hose reels, can handle up to 50′ x 1/2″ hose. Fully ported shaft and swivel. Hose guide arm can be placed in deferent positions to accommodate any method of mounting.

 

Aluminum 5 Female NH to 6 Male NH Fire Hose Adapter

Aluminum 5″ Female NH to 6″ Male NH Fire Hose Adapter

Aluminum 5″ Female NH to 6″ Male NH Fire Hose Adapter - 0 nh / nstthe male will only connect to a female 6. Nh = nst. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket. 95% lead freealuminum adapters are fabricated from seamless extruded 6061-t6 aluminum and hard coat anodized per mil-a-8625 type iii, class 1. Npt national pipe tapered is common in plumbing and some industrial uses. Part identifications are permanent and stamped prior to hardcoat. The female will only connect to a male 5. As its name implies this is a tapered thread so that the outside diameter of the male (odm) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. Nh / nst the most common thread type in use by fire departments today is nst or national standard thread. Threads have a blunt start higbee cut with indicators on adjacent lugs. Sometimes referred to as pipe thread because pvc pipe and schedule 40 pipe are typically threaded in npt. 0 nh / nstcomplies with nfpa 1963 (corrosion resistance)99. It can even be referred to as nht or national hose thread but nst or nh is more common these days. For example, a male npsh coupling will not thread into a female metal or pvc pipe. Npsh national pipe straight hose (npsh) or iron pipe thread (ipt) has the same threads per inch (tpi) as national pipe tapered (npt) but the thread does not taper. Warning, it will not thread into a female npt pipe. Npsh is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like nh / nst, which make both ideal for hose couplings. Nst also goes by the initials nh or national hose. Adapters and components meet the requirements of nfpa 1963.

 

Aluminum 3 Female NPSH to 2 12 Male NH Fire Hose Adapter

Aluminum 3″ Female NPSH to 2 1/2″ Male NH Fire Hose Adapter

Aluminum 3″ Female NPSH to 2 1/2″ Male NH Fire Hose Adapter - For example, a male npsh coupling will not thread into a female metal or pvc pipe. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the use of a gasket. Npt national pipe tapered is common in plumbing and some industrial uses. Adapters and components meet the requirements of nfpa 1963. It can even be referred to as nht or national hose thread but nst or nh is more common these days. 75% lead free. Nh = nst. Material, 6061-t6 aluminumfinish, hard coat anodizedcomplies with nfpa 1963 (corrosion resistance)99. Npsh national pipe straight hose (npsh) or iron pipe thread (ipt) has the same threads per inch (tpi) as national pipe tapered (npt) but the thread does not taper. Threads have a blunt start higbee cut with indicators on adjacent lugs. Nh / nst the most common thread type in use by fire departments today is nst or national standard thread. Part identifications are permanent and stamped prior to hardcoat. Npsh is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like nh / nst, which make both ideal for hose couplings. 95% lead freethe safe water drinking act section 1417 requires “lead free” products to be a minimum of 99. Nst also goes by the initials nh or national hose. Warning, it will not thread into a female npt pipe. Aluminum adapters are fabricated from seamless extruded 6061-t6 aluminum and hard coat anodized per mil-a-8625 type iii, class 1. As its name implies this is a tapered thread so that the outside diameter of the male (odm) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. Sometimes referred to as pipe thread because pvc pipe and schedule 40 pipe are typically threaded in npt.

 

Female AN8 8AN To 12 12 inch 127mm Barb 90 Degree Swivel Hose Fitting Aluminum Hose Barb Fuel Line Adapter Blue Anodized

Female AN8 8AN To 1/2″ 1/2 inch 12.7mm Barb 90 Degree Swivel Hose Fitting Aluminum Hose Barb Fuel Line Adapter Blue Anodized

Female AN8 8AN To 1/2″ 1/2 inch 12.7mm Barb 90 Degree Swivel Hose Fitting Aluminum Hose Barb Fuel Line Adapter Blue Anodized - Colour blue. Manufactured using aluminum alloys that meet or exceed minimum requirements for hose fittings. Each component is precision-machined to exact tolerances for trouble-free performance. Materialmade of 6061 t6 lightweight aluminum alloy. Size female 8an to 1/2 barb, 90 degree swivel hose fitting.

 

Aluminum Pin Lug Connector Hose Shank for Lay Flat and Suction Hoses 1 12 Dia - CLPL-150-AB

Aluminum Pin Lug Connector Hose Shank for Lay Flat and Suction Hoses (1 1/2″ Dia.) – CLPL-150-AB

Aluminum Pin Lug Connector Hose Shank for Lay Flat and Suction Hoses (1 1/2″ Dia.) – CLPL-150-AB - This aluminum hose shank pin lug connector set is made from an aluminum alloy with brass swivel. They are normally used on the ends of a suction hose or lay flat discharge hose. Specially designed for high tensile strength, lightness and rigidity. Our pin lug couplings come complete with male and female shanks in nst threads. Male and female ends are made of aluminum, and the female end has brass swivel nut.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.