Best 24 Dark Bronze Anodizeds

 

Pemko Brush Door Bottom Sweep Dark Bronze Anodized Aluminum with 0625 Black Nylon Brush Insert 025 W x 1375 H x 36 L

Pemko Brush Door Bottom Sweep, Dark Bronze Anodized Aluminum with 0.625″ Black Nylon Brush Insert, 0.25″ W x 1.375″ H x 36″ L

Pemko Brush Door Bottom Sweep, Dark Bronze Anodized Aluminum with 0.625″ Black Nylon Brush Insert, 0.25″ W x 1.375″ H x 36″ L - Door sweep channels are available in several styles with materials based on your application. Door sweeps are surface applied to the face of a door. They are commonly used on the exterior of outswing doors. The inserts for door sweeps allow customers to choose from vinyl, neoprene, nylon brush and pile depending on the application.

 

Rockwood 47314 Aluminum Push Bar 1 Width 33 Length 2-12 Projection Extra Dark Bronze Anodized Finish

Rockwood 47.314 Aluminum Push Bar, 1″ Width, 33″ Length, 2-1/2″ Projection, Extra Dark Bronze Anodized Finish

Rockwood 47.314 Aluminum Push Bar, 1″ Width, 33″ Length, 2-1/2″ Projection, Extra Dark Bronze Anodized Finish - Aluminum push bar with an extra dark bronze anodized finish for pushing open a door. Meets ansi 1566 j501 specifications. Bar has a 1″ diameter, a 33″ ctc (center-to-center) length, a 2-1/2″ projection, and a 1-1/2″ clearance. Includes two 1/4″-20 x 2-1/4″ through bolts and two finish washers for attaching to standard 1-3/4″ door.

 

Hager 780-224 Series Aluminum Heavy Duty Fire Rated Roton Continuous Geared Hinges Concealed Leaf Dark Bronze Anodized 83 Length Pack of 1

Hager 780-224 Series Aluminum Heavy Duty Fire Rated Roton Continuous Geared Hinges, Concealed Leaf, Dark Bronze Anodized, 83″ Length (Pack of 1)

Hager 780-224 Series Aluminum Heavy Duty Fire Rated Roton Continuous Geared Hinges, Concealed Leaf, Dark Bronze Anodized, 83″ Length (Pack of 1) - Because of this, we offer our lifetime warranty with confidence. Hager roton continuous geared hinges are designed for superior performance. Hager roton hinges are unique, geared hinges developed to outperform most other entrance components because the weight of the door is distributed along the full length of the door frame. Roton continuous hinges have been utilized in hospitals, schools, hotels, offices, airports, stadiums, storefronts, and commercial and industrial buildings in new construction and retrofit applications for over 30 years.

 

Dor-O-Matic 1690EO 36IN DC13 Concealed Vertical Rod Exit Only Exit Device 36In 313 Dark Bronze Anodized

Dor-O-Matic 1690EO 36IN DC13 Concealed Vertical Rod Exit Only Exit Device 36In 313, Dark Bronze Anodized

Dor-O-Matic 1690EO 36IN DC13 Concealed Vertical Rod Exit Only Exit Device 36In 313, Dark Bronze Anodized - Black powder-coated metal end caps. El, electric latch retraction, ed, electric dogging (both el and ed require ps873-2 minimum power supply) rx, request to exit switch, monitors pushpad sptd switch. Hex key dogging standard, except el where must use hold back feature. All machine screw mounting device mounting fasteners are concealed, latch fasteners are exposed to egress side. Hand field reversible, non-handed.

 

Online Metal Supply 5005 Dark Bronze Anodized Aluminum Sheet 063 x 24 x 48

Online Metal Supply 5005 Dark Bronze Anodized Aluminum Sheet .063″ x 24″ x 48″

Online Metal Supply 5005 Dark Bronze Anodized Aluminum Sheet .063″ x 24″ x 48″ - 06) length tolerance (+/-0. 001) width tolerance (+/-0. 91 lbs thickness tolerance (+/-. Material aluminumalloy 5005temper h34 shape sheet thickness 0. Dark bronze anodized aluminum sheet has a smooth colored anodized finish on the front side, the backside of the sheet may or may not have anodized color. 063 inchwidth 24 incheslength 48 inchesfinish anodized product weight 6. 06) notes sheets are anodized on one side only, anodized side is protected with peel off coating, backside may have scratches from shearing operations. Anodizing adds a protective layer to the material to which gives it a smooth, slick surface that is resistance to weather and elements.

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 72L x 10W x 025H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 72″L x 10″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 72″L x 10″W x 0.25″H - Pack of 1 hinge. To use a saddle threshold in an offset condition, use an elevator. Installation hardware and installation guide included. Dark bronze anodized aluminum. Ul listed fire rated, ansi a15626 grade 1 for 300 lb doors, warnock hersey certified in compliance with ansi a25013 2003.

 

Rockwood BF157313 Aluminum 90-Degree Offset Door Pull 1 Diameter x 10 Center-to-Center Through Bolt Mounting for 1-34 Door Dark Bronze Anodized Finish

Rockwood BF157.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 10″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish

Rockwood BF157.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 10″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish - Pull has a 10″ center-to-center length, 11″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″. Includes mounting hardware. Aluminum 90-degree offset door pull with a dark bronze anodized finish and a through-bolt mounting style for a standard 1-3/4″ thick door. Meets ansi a1566 j402 specifications and is ada compliant.

 

Pemko Magnetic Perimeter Gasketing Dark Bronze Anodized Aluminum with Magnetic Insert 36 L x 04275 W x 1 H

Pemko Magnetic Perimeter Gasketing, Dark Bronze Anodized Aluminum with Magnetic Insert, 36″ L x 0.4275″ W x 1″ H

Pemko Magnetic Perimeter Gasketing, Dark Bronze Anodized Aluminum with Magnetic Insert, 36″ L x 0.4275″ W x 1″ H - The sides (side jambs) are the second number used in ordering. The top of the door (head) is the first number used in ordering a perimeter set of gasketing. Magnetic gasketing provides an effective perimeter seal around a steel faced door. Pemko perimeter gasketing products are designed to seal the gap around the top and the 2 sides of a door assembly. Numerous channels are available with a wide variety of inserts. The side jambs are provided as two pieces.

 

Hager 780-157 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges Full Surface Dark Bronze Anodized 83 Length Pack of 1

Hager 780-157 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Full Surface, Dark Bronze Anodized, 83″ Length (Pack of 1)

Hager 780-157 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Full Surface, Dark Bronze Anodized, 83″ Length (Pack of 1) - Hager roton hinges are unique, geared hinges developed to outperform most other entrance components because the weight of the door is distributed along the full length of the door frame. Hager roton continuous geared hinges are designed for superior performance. Roton continuous hinges have been utilized in hospitals, schools, hotels, offices, airports, stadiums, storefronts, and commercial and industrial buildings in new construction and retrofit applications for over 30 years. Because of this, we offer our lifetime warranty with confidence.

 

Adams Rite 8400 Series Dark Bronze Anodized Finish Right Hand Door Mortise Exit Device 1-18 Backset 36 Door Size Pack of 1

Adams Rite 8400 Series Dark Bronze Anodized Finish Right Hand Door Mortise Exit Device, 1-1/8″ Backset, 36″ Door Size (Pack of 1)

Adams Rite 8400 Series Dark Bronze Anodized Finish Right Hand Door Mortise Exit Device, 1-1/8″ Backset, 36″ Door Size (Pack of 1) - Dark bronze anodized finish. Warranty five year limited. Adams-rite mortise exit device. Pushbar length 36-inches standard width bars can be field cut to the next smallest opening width. Materials pushbar made of extruded aluminum, clad or anodized in a variety of finishes. Ansi/bhma grade i.

 

Adams Rite 4510-46-101-313 Standard Duty Deadlatch with 1-12 Backset and Flat Faceplate RH or LHR with a 4-58 Strike 313 Dark Bronze Anodized Finish

Adams Rite 4510-46-101-313 Standard Duty Deadlatch with 1-1/2″ Backset and Flat Faceplate. RH or LHR with a 4-5/8″ Strike. 313 Dark Bronze Anodized Finish.

Adams Rite 4510-46-101-313 Standard Duty Deadlatch with 1-1/2″ Backset and Flat Faceplate. RH or LHR with a 4-5/8″ Strike. 313 Dark Bronze Anodized Finish. - See cylinders for cylinder make, thumbturn and trim ring information. Specifications bolt holdback while bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging. Cylinder cam operable by any standard mortise cylinder with ms® cam, dimensioned as shown. A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. Uses any standard mortise cylinder with ms® dimensioned cam. Cylinders with ms® cams can be readily obtained from most cylinder manufacturers. Deadlocks latch bolt to prevent “loiding” or case-knife entry. To hold bolt retracted, push it in and secure by reverse turn of key. Auxiliary bolt all metal. Depth varies by backset (see table on catalog page). Handing is reversible without special tools. Standard package individually boxed with strike, and machine screws for mounting. Case measures 1” x 5-13/16” x depth.  . Steel with corrosion-resistant plating. Function the 4510 standard duty deadlatch offers flexibility of traffic control during and after business hours. Cylinders, paddles, and handles available separately. All metal with hardened steel internal pins. Available separately radius strike for opposite stile in paired doors longer strike (4901) to cover slot strike of ms lock long lip strikes for centerhung doors. Latchbolt 1/2” x 1” x 1/2” throw. Interchangeable, without stile modification, with any ms1850a or ms1850s operation turn key or operate handle to retract spring-loaded latchbolt. Strikes standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush.

 

Adams Rite 8800 Series Dark Bronze Anodized Electric Latch Retraction Narrow Stile Exit Device 36 Door Size Pack of 1

Adams Rite 8800 Series Dark Bronze Anodized Electric Latch Retraction Narrow Stile Exit Device, 36″ Door Size (Pack of 1)

Adams Rite 8800 Series Dark Bronze Anodized Electric Latch Retraction Narrow Stile Exit Device, 36″ Door Size (Pack of 1) - Because electrical operation of device is fail-secure, this option can be used on fire-rated as well as life-safety applications. Adams rite dark bronze anodized electric latch retraction narrow stile exit device for 36-inches aluminum doors. Electric dogging also available. Standard and narrow version supplied with exit device. Five year limited warranty. Pushbar made of extruded aluminum, clad or anodized in a variety of finishes. The el option uses a solenoid mounted in pushbar for instantaneous unlocking and locking of the exit device from a remote location or access control device. Rim-devices are available in 12 or 24 vdc and can be powered with a simple transformer and rectifier or other dc power supply. Dogging standard dogging with hex key or optional cylinder dogging. In the event of a power failure, device automatically relocks. Strike made of hardened steel. Fasteners standard self-tapping screws.

 

Adams Rite 7140-445-313 Electric Strike for ANSI size for Hollow Metal and Wood Jambs 16 Volt AC Fail Safe 313 Dark Bronze Anodized Finish

Adams Rite 7140-445-313 Electric Strike for ANSI size for Hollow Metal and Wood Jambs. 16 Volt AC. Fail Safe. 313 Dark Bronze Anodized Finish.

Adams Rite 7140-445-313 Electric Strike for ANSI size for Hollow Metal and Wood Jambs. 16 Volt AC. Fail Safe. 313 Dark Bronze Anodized Finish. - Specifications fail-safe/fail-secure field convertible from one mode to the other. Bolt retainer jaw is stainless steel. Extremely compact mechanism fits into aluminum jamb sections as shallow as 1-5/8”. However, ac intermittent solenoid must not be used continuously in either. Voltage available in 12 or 24 volt ac and dc. Strike lip basic 7140 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Fits existing prep for discontinued adams rite 7040, 7840n, 7850 electric strikes. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Function remote electrical control of any door equipped with an adams rite 4500, 4700, or 4900 series (or similar) deadlatch or cylindrical (key-in-knob/lever) type locksets with 1/2” to 5/8” latchbolt projection. Dc continuous units are silent, ac intermittent units “buzz” on operation. Zinc aluminum alloy. Strike accepts bolt of any adams rite 4500, 4700 (discontinued), or 4900 deadlatch or cylindrical latches. Faceplate measures 1-1/4 x 4-7/8” faceplate is flat, with square corners. For use in hollow metal or wood doors and jambs. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Description 7140 electric strikes with 4-7/8” faceplates are designed for adams rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. Case approximately 1” x 3-3/8” x 1-5/8” deep.  . Strike opening 5/8” x 1-7/16” x 1/2” deep.

 

Pemko 221DV42 Dark Bronze Anodized Finish Wrap Around Door Bottom Door Shoes with Vinyl Weatherseal for 42 Door

Pemko 221DV42 Dark Bronze Anodized Finish Wrap Around Door Bottom Door Shoes with Vinyl Weatherseal for 42″ Door

Pemko 221DV42 Dark Bronze Anodized Finish Wrap Around Door Bottom Door Shoes with Vinyl Weatherseal for 42″ Door - Used to seal the area under a door with minimal affect on the appearance of the face of the door. Minimum order 1 each. Door bottom door sweeps are provided with stainless steel fasteners. Length 42-1/2 in. Channels are punched with elongated slots for easy adjustment.

 

Rockwood 107314 Aluminum Straight Door Pull for 1-34 Door 34 Diameter x 8 Center-to-Center Type 1 Through-Bolt Mount Extra Dark Bronze Anodized Finish

Rockwood 107.314 Aluminum Straight Door Pull for 1-3/4″ Door, 3/4″ Diameter x 8″ Center-to-Center, Type 1 Through-Bolt Mount, Extra Dark Bronze Anodized Finish

Rockwood 107.314 Aluminum Straight Door Pull for 1-3/4″ Door, 3/4″ Diameter x 8″ Center-to-Center, Type 1 Through-Bolt Mount, Extra Dark Bronze Anodized Finish - Includes mounting hardware. Pull has an 8″ center-to-center length, 8-3/4″ overall length, 3/4″ diameter, 2-5/8″ projection, and 1-7/8″ clearance. Aluminum straight door pull with an extra dark bronze anodized finish and a type 1 through bolt mounting style for use on a standard 1-3/4″ thick door. Meets ansi a1566 j401 specifications.

 

Rockwood 107BTB5314 Aluminum Straight Door Pull Set for 1-34 Metal or Wood Door 34 Diameter x 8 Center-to-Center Type 5 Back to Back Mount Extra Dark Bronze Anodized Finish

Rockwood 107BTB5.314 Aluminum Straight Door Pull Set for 1-3/4″ Metal or Wood Door, 3/4″ Diameter x 8″ Center-to-Center, Type 5 Back to Back Mount, Extra Dark Bronze Anodized Finish

Rockwood 107BTB5.314 Aluminum Straight Door Pull Set for 1-3/4″ Metal or Wood Door, 3/4″ Diameter x 8″ Center-to-Center, Type 5 Back to Back Mount, Extra Dark Bronze Anodized Finish - Aluminum straight door pull set with an extra dark bronze anodized finish and a type 5 back-to-back mounting style for mounting in pairs on a standard 1-3/4″ thick metal or wood door. Each pull has an 8″ center-to-center length, 8-3/4″ overall length, 3/4″ diameter, 2-5/8″ projection, and 1-7/8″ clearance. Includes mounting hardware. Meets ansi a1566 j401 specifications.

 

Rockwood BF157A313 Aluminum 90-Degree Offset Door Pull 1 Diameter x 9 Center-to-Center Through Bolt Mounting for 1-34 Door Dark Bronze Anodized Finish

Rockwood BF157A.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 9″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish

Rockwood BF157A.313 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 9″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Dark Bronze Anodized Finish - Meets ansi a1566 j402 specifications and is ada compliant. Aluminum 90-degree offset door pull with a dark bronze anodized finish and a through-bolt mounting style for a standard 1-3/4″ thick door. Pull has a 9″ center-to-center length, 10″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″. Includes mounting hardware.

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 48L x 10W x 025H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 48″L x 10″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 48″L x 10″W x 0.25″H - Five year limited warranty. Strong, durable construction for a high level of security. To use a saddle threshold in an offset condition, use an elevator. Pushbar clad or anodized, not plated, in a variety of finishes. Easy to install clean, unobtrusive design.

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 36L x 5W x 025H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 5″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 5″W x 0.25″H - Tested and approved under ul10c for fire. To use a saddle threshold in an offset condition, use an elevator.

 

Hager 780-210 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges Full Surface Dark Bronze Anodized 83 Length Pack of 1

Hager 780-210 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Full Surface, Dark Bronze Anodized, 83″ Length (Pack of 1)

Hager 780-210 Series Aluminum Standard Duty Fire Rated Roton Continuous Geared Hinges, Full Surface, Dark Bronze Anodized, 83″ Length (Pack of 1) - Hager roton continuous geared hinges are designed for superior performance. Roton continuous hinges have been utilized in hospitals, schools, hotels, offices, airports, stadiums, storefronts, and commercial and industrial buildings in new construction and retrofit applications for over 30 years. Hager roton hinges are unique, geared hinges developed to outperform most other entrance components because the weight of the door is distributed along the full length of the door frame. Because of this, we offer our lifetime warranty with confidence.

 

Rockwood BF158314 Aluminum 90-Degree Offset Door Pull 1 Diameter x 12 Center-to-Center Through Bolt Mounting for 1-34 Door Extra Dark Bronze Anodized Finish

Rockwood BF158.314 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 12″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Extra Dark Bronze Anodized Finish

Rockwood BF158.314 Aluminum 90-Degree Offset Door Pull, 1″ Diameter x 12″ Center-to-Center, Through Bolt Mounting for 1-3/4″ Door, Extra Dark Bronze Anodized Finish - Pull has a 12″ center-to-center length, 13″ overall length, 1″ diameter, 3-1/2″ projection, and 2-1/2″ clearance, and is offset 4″. Meets ansi a1566 j402 specifications and is ada compliant. Includes mounting hardware. Aluminum 90-degree offset door pull with an extra dark bronze anodized finish and a through-bolt mounting style for a standard 1-3/4″ thick door.

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 48L x 5W x 025H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 48″L x 5″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 48″L x 5″W x 0.25″H - To use a saddle threshold in an offset condition, use an elevator. Tested and approved under ul10c for fire.

 

Adams Rite 4510-45-101-313 Standard Duty Deadlatch with 1-12 Backset and Flat Faceplate LH or RHR with a 4-58 Strike 313 Dark Bronze Anodized Finish

Adams Rite 4510-45-101-313 Standard Duty Deadlatch with 1-1/2″ Backset and Flat Faceplate. LH or RHR with a 4-5/8″ Strike. 313 Dark Bronze Anodized Finish.

Adams Rite 4510-45-101-313 Standard Duty Deadlatch with 1-1/2″ Backset and Flat Faceplate. LH or RHR with a 4-5/8″ Strike. 313 Dark Bronze Anodized Finish. - A reverse turn of the key while the bolt is held retracted retains the bolt to allow two-way traffic for hospitals, banks, stores, and other buildings which require free entrance at certain times and exit-only at other times. Cylinders with ms® cams can be readily obtained from most cylinder manufacturers. Available separately radius strike for opposite stile in paired doors longer strike (4901) to cover slot strike of ms lock long lip strikes for centerhung doors. Steel with corrosion-resistant plating. All metal with hardened steel internal pins. Specifications bolt holdback while bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging. Cylinders, paddles, and handles available separately. Latchbolt 1/2” x 1” x 1/2” throw. Uses any standard mortise cylinder with ms® dimensioned cam. Strikes standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush. Case measures 1” x 5-13/16” x depth. Standard package individually boxed with strike, and machine screws for mounting. Function the 4510 standard duty deadlatch offers flexibility of traffic control during and after business hours. Depth varies by backset (see table on catalog page). Cylinder cam operable by any standard mortise cylinder with ms® cam, dimensioned as shown. Deadlocks latch bolt to prevent “loiding” or case-knife entry. See cylinders for cylinder make, thumbturn and trim ring information. Interchangeable, without stile modification, with any ms1850a or ms1850s operation turn key or operate handle to retract spring-loaded latchbolt. To hold bolt retracted, push it in and secure by reverse turn of key. Auxiliary bolt all metal. Handing is reversible without special tools.  .

 

Pemko Fluted Saddle Threshold Dark Bronze Anodized Aluminum 36L x 10W x 025H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 10″W x 0.25″H

Pemko Fluted Saddle Threshold, Dark Bronze Anodized Aluminum, 36″L x 10″W x 0.25″H - Easy to change hand. Cylinder not included. To use a saddle threshold in an offset condition, use an elevator. 1-1/8″ backset. Heavy duty.