Best and Coolest 19 32 Unfs

 

Qty 50 Stainless Steel 304 Rivet Nut Rivnut Insert Nutsert - 10-32 UNF Nuts

Qty. 50 Stainless Steel 304 Rivet Nut Rivnut Insert Nutsert – #10-32 UNF Nuts

Qty. 50 Stainless Steel 304 Rivet Nut Rivnut Insert Nutsert – #10-32 UNF Nuts - Our return policy item must be returned within 30 days after delivery date we deduct 15% for a restocking fee the buyer pays return shipping cost if our error we will refund return shipping cost where free shipping is offered we also deduct what it cost to sent the item(s) to you. Look at 2nd image for measurements in decimal inches. Free shipping.

 

Push to Connect Straight Male Fitting 4mm OD 10-32 UNF Thread

Push to Connect Straight Male Fitting 4mm OD, 10-32 UNF Thread

Push to Connect Straight Male Fitting 4mm OD, 10-32 UNF Thread - Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Comes with round with square end shank. Mtc4-u10.

 

18-8 Stainless Steel Machine Screw Plain Finish Truss Head Phillips Drive Meets ASME B1863 58 Length Fully Threaded 10-32 UNF Threads Pack of 100

18-8 Stainless Steel Machine Screw, Plain Finish, Truss Head, Phillips Drive, Meets ASME B18.6.3, 5/8″ Length, Fully Threaded, #10-32 UNF Threads (Pack of 100)

18-8 Stainless Steel Machine Screw, Plain Finish, Truss Head, Phillips Drive, Meets ASME B18.6.3, 5/8″ Length, Fully Threaded, #10-32 UNF Threads (Pack of 100) - Plain surface has no finish or coating. Meets asme b1863 specifications. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening.

 

MettleAir MTC 14-U10 Push to Connect Straight Male Fitting 14 OD 10-32 UNF Thread Pack of 10

MettleAir MTC 1/4-U10 Push to Connect Straight Male Fitting, 1/4″ OD, 10-32 UNF Thread (Pack of 10)

MettleAir MTC 1/4-U10 Push to Connect Straight Male Fitting, 1/4″ OD, 10-32 UNF Thread (Pack of 10) - 9 kgf / cm2 (0-990kpa). Designed for polyurethane or nylon tubing. Working temperature 32-140°f / 0-60°c,metallic body nickel-plated brass, o-ring nbr (acrylonitrile butadiene rubber), plastic body pbt (polybutylene terephthalate), packing nbr (acrylonitrile butadiene rubber), back ring pom (polyoxymethylene plastic), lock claws stainless steel, collar zinc alloy, sleeve pom (polyoxymethylene plastic). Reusable multiple connections/disconnections. Quick and reliable connections. Hexagonal/allen wrench tightening. Fluid type air, operating pressure 0- 150 psi / 0, 9. Convenient elliptical sleeve configuration. Metallic body made of non-corrosive, non-contaminant nickel-plated brass.

 

MettleAir 120-AU10 18 NPT Female to 10-32 UNF Male Brass Pipe AdaptorAdapter Straight ReducerReducing Coupling Male to Female Pack of 10

MettleAir 120-AU10 1/8″ NPT Female to 10-32 UNF Male Brass Pipe Adaptor/Adapter Straight Reducer/Reducing Coupling Male to Female (Pack of 10)

MettleAir 120-AU10 1/8″ NPT Female to 10-32 UNF Male Brass Pipe Adaptor/Adapter Straight Reducer/Reducing Coupling Male to Female (Pack of 10) - Quantity 1 (one) piece. Our quality barbed/threaded connectors/couplers are manufactured to the highest standards. They are perfect for connecting lines for air, water, fuel, oil and inert gases.

 

SMC NCDJPB15-100D  Pin Air Cylinder Compact Double Acting Basic Style Mounting Switch Ready Rubber Cushion 58 Bore OD 1 Stroke 0236 Rod OD 10-32 UNF

SMC NCDJPB15-100D Pin Air Cylinder, Compact, Double Acting, Basic Style Mounting, Switch Ready, Rubber Cushion, 5/8″ Bore OD, 1″ Stroke, 0.236″ Rod OD, 10-32 UNF

SMC NCDJPB15-100D Pin Air Cylinder, Compact, Double Acting, Basic Style Mounting, Switch Ready, Rubber Cushion, 5/8″ Bore OD, 1″ Stroke, 0.236″ Rod OD, 10-32 UNF - Double-acting air (pneumatic) cylinder with two air ports for pushing and pulling the piston rod in both directions. Brass body for resistance to corrosion with a stainless-steel piston rod. Compact pin-style body with single threaded piston rod for linear movement in limited spaces. Switch ready with magnet sensor installed for connecting to electrical circuits for automation. Basic-style mounting with rod end and mounting nuts for attaching brackets (sold separately).

 

Flange Button Socket Head Cap Screw 10-32 UNF Thread 12 Long Fully Threaded Alloy Steel Unbrako Black Oxide Pack of 100

Flange Button Socket Head Cap Screw, 10-32 UNF Thread, 1/2″ Long, Fully Threaded, Alloy Steel, Unbrako, Black Oxide (Pack of 100)

Flange Button Socket Head Cap Screw, 10-32 UNF Thread, 1/2″ Long, Fully Threaded, Alloy Steel, Unbrako, Black Oxide (Pack of 100) - As the large under head surface pressure by area is low, they can also be used with softer materials without harm or damage. Unbrako flange button socket head cap screws allow the covering of large diameter holes, and are ideal to fix strips, cover plates and sheet metal. The radius on the flange button head presents a streamlined profile, virtually eliminating the sharp edges which could occur with a bolt and washer assembly.

 

SMC KQ2L03-32A PBT and Brass Push-to-Connect Tube Fitting 90 degree Elbow 532 Tube OD x 10-32 UNF Male Pack of 10

SMC KQ2L03-32A PBT and Brass Push-to-Connect Tube Fitting, 90 degree Elbow, 5/32″ Tube OD x 10-32 UNF Male (Pack of 10)

SMC KQ2L03-32A PBT and Brass Push-to-Connect Tube Fitting, 90 degree Elbow, 5/32″ Tube OD x 10-32 UNF Male (Pack of 10) - Push-to-connect inch tube connection on one end and male unf threads with gasket on the other end. Pbt and brass body and brass threads for resistance to corrosion. Operating pressure range of -145 to 145 psi (-100 kpa to 1 mpa). Operating temperature ranges of 23 to 140 degrees f (-5 to 60 degrees c) (ambient) and 32 to 104 degrees f (0 to 40 degrees c) (fluid). 90 degree male elbow to connect a tube to a female thread at a 90 degree angle.

 

MacCan Pneumatic PC532-U10 Male Straight 532 Tube OD x 10-32 Inch UNF Thread Push to Connect Fittings Pack of 10

MacCan Pneumatic PC5/32-U10 Male Straight 5/32″ Tube OD x 10-32 Inch UNF Thread Push to Connect Fittings (Pack of 10)

MacCan Pneumatic PC5/32-U10 Male Straight 5/32″ Tube OD x 10-32 Inch UNF Thread Push to Connect Fittings (Pack of 10) - Nickel-plated brass body ensures anti-corrosion and anti-contamination. Fittings are equipped with a gasket, o-ring and teflon-treatment on the thread. Even after installation, the direction of tubing can be changed freely, all tapered threads are pre-coated with teflon with fine seal performance. Working pressure 0-10mpa | 0-150psi working temperature 0-60°c | 32~140°f applicable tube polyurethane and nylon. Quick installation, simple and flexible, space-saving, easy to connect tube by one touch.

 

18-8 Stainless Steel Socket Cap Screw Plain Finish Button Head Internal Hex Drive Meets ASME B183ASTM F879 34 Length Fully Threaded 10-32 UNF Threads Imported Pack of 100

18-8 Stainless Steel Socket Cap Screw, Plain Finish, Button Head, Internal Hex Drive, Meets ASME B18.3/ASTM F879, 3/4″ Length, Fully Threaded, #10-32 UNF Threads, Imported (Pack of 100)

18-8 Stainless Steel Socket Cap Screw, Plain Finish, Button Head, Internal Hex Drive, Meets ASME B18.3/ASTM F879, 3/4″ Length, Fully Threaded, #10-32 UNF Threads, Imported (Pack of 100) - Button head has a rounded, low-profile top that is suitable for light duty applications. Meets asme b183 and astm f879 specifications. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating. Internal hex drive has a hexagonal slot that turns using an allen key driver.

 

Socket Set Screw Knurled Cup Point 10-32 UNF Thread 14 Long Alloy Steel Unbrako 45H Black Oxide Pack of 100

Socket Set Screw, Knurled Cup Point, 10-32 UNF Thread, 1/4″ Long, Alloy Steel, Unbrako 45H, Black Oxide (Pack of 100)

Socket Set Screw, Knurled Cup Point, 10-32 UNF Thread, 1/4″ Long, Alloy Steel, Unbrako 45H, Black Oxide (Pack of 100) - Rounded corners resist cracking and allow set screws to withstand high tightening torques. Key fits deeply into the socket to provide extra wrenching area for secure tightening without reaming the socket or rounding off corners of the key. Counter bored knurled cup self-locking point provides greater vibrational holding power, even in poorly tapped holes. 3/32″ key size.

 

DEWALT DWADTQTR1032 Impact Ready 10-32 UNF Drill Tap 14 Capacity

DEWALT DWADTQTR1032 Impact Ready 10-32 UNF Drill Tap, 1/4″ Capacity

DEWALT DWADTQTR1032 Impact Ready 10-32 UNF Drill Tap, 1/4″ Capacity - This item allows you to drill, tap, and countersink all in one step capable of working with up to 1/4″ thick material capacity. Dewalt dwadtqtr1032 impact ready® 10-32 unf drill tap 1/4″ capacity features a 1/4″ hex shank for use in impact drivers. Commonly used by elevator installers, mechanicals, electricians, glaziers.

 

PneumaticPlus PL-532-U Push to Connect Tube Fitting Male Elbow - 532 Tube OD x 10-32 UNF Thread Pack of 10

PneumaticPlus PL-5/32-U Push to Connect Tube Fitting, Male Elbow – 5/32″ Tube OD x 10-32 UNF Thread (Pack of 10)

PneumaticPlus PL-5/32-U Push to Connect Tube Fitting, Male Elbow – 5/32″ Tube OD x 10-32 UNF Thread (Pack of 10) - Pneumaticplus offers composite fittings in wide range of sizes, body styles and thread types for various pneumatic applications.

 

303 Stainless Steel Thumb Screw Plain Finish Knurled Head 34 Length Fully Threaded 10-32 UNF Threads Made in US Pack of 5

303 Stainless Steel Thumb Screw, Plain Finish, Knurled Head, 3/4″ Length, Fully Threaded, #10-32 UNF Threads, Made in US (Pack of 5)

303 Stainless Steel Thumb Screw, Plain Finish, Knurled Head, 3/4″ Length, Fully Threaded, #10-32 UNF Threads, Made in US (Pack of 5) - It has a longer head length than standard thumb screw for easier adjusting. A threaded fastener’s size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Plain stainless steel 303 provides better corrosion resistance than steel. They come in a variety of head styles, but each includes an easy-grip head which allows for simple “by-hand” installation. Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their wide use in practically every industry. Thumb screws are designed to be tightened and loosened by hand. The thumb screw head has a knurled surface, which gives a better gripping surface and makes it easier to tighten or loosen fasteners manually.

 

Steel Thumb Screw Black Oxide Finish Knurled Head Dog Point 1-12 Length Partially Threaded 10-32 UNF Threads Made in US Pack of 2

Steel Thumb Screw, Black Oxide Finish, Knurled Head, Dog Point, 1-1/2″ Length, Partially Threaded, #10-32 UNF Threads, Made in US (Pack of 2)

Steel Thumb Screw, Black Oxide Finish, Knurled Head, Dog Point, 1-1/2″ Length, Partially Threaded, #10-32 UNF Threads, Made in US (Pack of 2) - Dog point prevents damage to end threads. Black oxide finish for excellent resistance to corrosion. Material is 12l14 steel.

 

MacCan Pneumatic SC14-U10 Speed Controller Elbow 14 Tube OD x 10-32 Inch UNF Thread Push to Connect Fittings Pack of 5

MacCan Pneumatic SC1/4-U10 Speed Controller Elbow 1/4″ Tube OD x 10-32 Inch UNF Thread Push to Connect Fittings (Pack of 5)

MacCan Pneumatic SC1/4-U10 Speed Controller Elbow 1/4″ Tube OD x 10-32 Inch UNF Thread Push to Connect Fittings (Pack of 5) - Nickel-plated brass body ensures anti-corrosion and anti-contamination. Fittings are equipped with a gasket, o-ring and teflon-treatment on the thread. Even after installation, the direction of tubing can be changed freely, all tapered threads are pre-coated with teflon with fine seal performance. Quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Working pressure 0-10mpa | 0-150psi working temperature 0-60°c | 32~140°f applicable tube polyurethane and nylon.

 

ISPINNER 10pcs 18 Tube OD x 10-32 UNF Thread Straight Push to Connect Fittings Quick Release Pneumatic Connectors PC-18-U10

ISPINNER 10pcs 1/8″ Tube OD x 10-32 UNF Thread Straight Push to Connect Fittings, Quick Release Pneumatic Connectors PC-1/8-U10

ISPINNER 10pcs 1/8″ Tube OD x 10-32 UNF Thread Straight Push to Connect Fittings, Quick Release Pneumatic Connectors PC-1/8-U10 - Application, one touch type pipe connection tool for air pressure piping various uses depending on the user’s environment. Material, safe and reliable material energy-saving, pollution-free, low-cost high pressure resistant and non tripping. Package includes, 10pcs pc 1/8″ tube od x 10-32 unf thread straight push to connect fittings. Easy operation, quick connect fittings easy to install, flexible and space-saving, 360-degree rotate freely, release rings adopt ellipse design, which can be removed conveniently. Durable, each fitting works well and they feel very solid and durable once applied, no worries or danger of tubing coming loose high pressure resistance, can withstand strong pressure without tripping, so no tripping needed, can works for a long time.

 

Legris 3118 56 20 Nylon Nickel-Plated Brass Push-to-Connect Fitting 90 Degree Banjo Elbow 14 Tube OD x 10-32 UNF Male

Legris 3118 56 20 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, 90 Degree Banjo Elbow, 1/4″ Tube OD x #10-32 UNF Male

Legris 3118 56 20 Nylon & Nickel-Plated Brass Push-to-Connect Fitting, 90 Degree Banjo Elbow, 1/4″ Tube OD x #10-32 UNF Male - Meets rohs and iso 14743 technical specifications. Handles pressures up to 290 psi (20 bar), operating temperature range of-20 to +80 degrees c (-4 to +176 degrees f), and a vacuum capability of 755 mm hg. Nylon body and nickel-plated brass sub-base. Push-to-connect tube connection on one end and male unf threads on the other end. 90-degree banjo elbow to connect a tube to a female threaded connection at a 90-degree angle.

 

18-8 Stainless Steel Machine Screw Black Oxide Finish Pan Head Phillips Drive Meets ASME B1863 1-14 Length Fully Threaded 10-32 UNF Threads Pack of 25

18-8 Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3, 1-1/4″ Length, Fully Threaded, #10-32 UNF Threads (Pack of 25)

18-8 Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, Meets ASME B18.6.3, 1-1/4″ Length, Fully Threaded, #10-32 UNF Threads (Pack of 25) - Pan head has a flat top and short vertical sides with a rounded top edge. 18-8 stainless steel provides good corrosion resistance and strength. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Black oxide finish provides mild corrosion resistance and lubricity. Meets asme b1863 specifications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.