Best and Coolest 20 Rotating Spindles

 

Starrett 786MEP-125 LCD Blade-Type Micrometer Non-Rotating Spindle Plain Thimble 100-125mm Range 0001mm Graduation

Starrett 786MEP-125 LCD Blade-Type Micrometer, Non-Rotating Spindle, Plain Thimble, 100-125mm Range, 0.001mm Graduation

Starrett 786MEP-125 LCD Blade-Type Micrometer, Non-Rotating Spindle, Plain Thimble, 100-125mm Range, 0.001mm Graduation - High-grade tool steel construction for durability. Non-rotating spindle helps provide steady positioning during measurement. Blade anvil and spindle for measurement of groove diameter of shafts and keyways. Statistical process control (spc) output transmits results to a computer or external device through an interface cable (sold separately). Digital, single-value readout lcd displays in inch and metric units for readability.

 

Mitutoyo 369-422 LCD Disk Micrometer Non-Rotating Spindle Quickmike Type Ratchet Stop 1-22254-5588mm Range 0000050001mm Graduation -00002 Accuracy

Mitutoyo 369-422 LCD Disk Micrometer, Non-Rotating Spindle, Quickmike Type, Ratchet Stop, 1-2.2″/25.4-55.88mm Range, 0.00005″/0.001mm Graduation, +/-0.0002″ Accuracy

Mitutoyo 369-422 LCD Disk Micrometer, Non-Rotating Spindle, Quickmike Type, Ratchet Stop, 1-2.2″/25.4-55.88mm Range, 0.00005″/0.001mm Graduation, +/-0.0002″ Accuracy - Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. Disc-shaped faces with flanges for measuring the pitch of gear teeth. Non-rotating spindle helps provide steady positioning during measurement. Digital, single-value readout lcd displays in inch and metric units for readability. Quickmike spindle feeds at a higher rate than conventional mechanism for productivity.

 

INSIZE 3631-100 Non-Rotating Spindle Electronic Micrometer 3-475-100 mm

INSIZE 3631-100 Non-Rotating Spindle Electronic Micrometer, 3″-4″/75-100 mm

INSIZE 3631-100 Non-Rotating Spindle Electronic Micrometer, 3″-4″/75-100 mm - Carbide measuring faces ratchet stop data output inch/mm, max/min. Tolerance, cr2032 battery, automatic power off. Supplied with setting standards (except 0-1 inch. Non-rotating spindle, for cylinders quick measurement one turn of sleeve or ratchet stop makes 039 inch. Resolution00005″/0001mm repeatability 00005″ measuring force 5-10n.

 

Starrett 486MP-50 Blade-Type Micrometer Non-Rotating Spindle Plain Thimble 25-50mm Range 001mm Graduation

Starrett 486MP-50 Blade-Type Micrometer, Non-Rotating Spindle, Plain Thimble, 25-50mm Range, 0.01mm Graduation

Starrett 486MP-50 Blade-Type Micrometer, Non-Rotating Spindle, Plain Thimble, 25-50mm Range, 0.01mm Graduation - Blade anvil and spindle for measurement of groove diameter of shafts and keyways. High-grade tool steel construction for durability. Non-rotating spindle helps provide steady positioning during measurement. Speeder helps provide quick adjustment capability. Vernier scale in metric units for taking precise outside diameter (od) measurements.

 

Double-Ended Flexible Scope Brush 6mm With Stops and 3mm With Rotating Spindles Ends

Double-Ended Flexible Scope Brush 6mm With Stops and 3mm With Rotating Spindles Ends

Double-Ended Flexible Scope Brush 6mm With Stops and 3mm With Rotating Spindles Ends - Flexible scope brushes, soft, white medical anti-microbial nylon bristles with bulbous safety tip and spring loaded brush head allow for safe, non-stressful navigation through channels.

 

INSIZE 3631-50 Non-Rotating Spindle Electronic Micrometer 1-225-50 mm

INSIZE 3631-50 Non-Rotating Spindle Electronic Micrometer, 1″-2″/25-50 mm

INSIZE 3631-50 Non-Rotating Spindle Electronic Micrometer, 1″-2″/25-50 mm - Carbide measuring faces ratchet stop data output inch/mm, max/min tolerance measurement, hold, on/off, zero. Cr2032 battery, automatic power off. Non-rotating spindle, for cylinders quick measurement one turn of sleeve or ratchet stop makes 039 inch. Supplied with setting standards (except 0-1 inch. Resolution00005″/0001mm repeatability 00005″ measuring force 5-10n.

 

Series 122 Blade Micrometer with Non-Rotating Spindle and Fitted Case 0-1 Range

Series 122 Blade Micrometer with Non-Rotating Spindle and Fitted Case, 0-1″ Range

Series 122 Blade Micrometer with Non-Rotating Spindle and Fitted Case, 0-1″ Range - Disc-shaped faces with flanges for measuring the pitch of gear teeth. Quickmike spindle feeds at a higher rate than conventional mechanism for productivity. Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. Please read full description carefully before ordering. Non-rotating spindle helps provide steady positioning during measurement.

 

Starrett 762MEXFL-25 Digital Micrometer Head Non-Rotating Spindle 0-25mm Range 0001mm Graduation -0003mm Accuracy Friction Thimble Lock Nut Carbide Face

Starrett 762MEXFL-25 Digital Micrometer Head, Non-Rotating Spindle, 0-25mm Range, 0.001mm Graduation, +/-0.003mm Accuracy, Friction Thimble, Lock Nut, Carbide Face

Starrett 762MEXFL-25 Digital Micrometer Head, Non-Rotating Spindle, 0-25mm Range, 0.001mm Graduation, +/-0.003mm Accuracy, Friction Thimble, Lock Nut, Carbide Face - Flat measuring face for measurement or use as a stop. Knurled ring-type lock nut to hold measurements in place. Digital, single-value readout lcd displays in inch and metric units for readability. Statistical process control (spc) output transmits results to a computer or external device through an interface cable (sold separately). Micro-lapped carbide measuring face helps provide accuracy and wear resistance.

 

INSIZE 3631-25 Non - Rotating Spindle Electronic Micrometer 0 - 1

INSIZE 3631-25 Non – Rotating Spindle Electronic Micrometer, 0″ – 1″

INSIZE 3631-25 Non – Rotating Spindle Electronic Micrometer, 0″ – 1″ - Tolerance measurement, hold, on/off, zero cr2032 battery, automatic power off. Carbide measuring faces ratchet stop data output button function inch/mm, max/min. Supplied with setting standards (except 0-1 inch. Resolution00005″/0001mm repeatability 00005″ measuring force 5-10n. Non-rotating spindle, suitable for cylinders quick measurement one turn of sleeve or ratchet stop makes 039 inch.

 

Mitutoyo 406-350 Digital Outside Micrometer Non-Rotating Spindle 0 to 10 to 254mm Range 0000050001mm Resolution Ratcheting Thimble Stop LCD SPC Data Output InchMetric

Mitutoyo 406-350 Digital Outside Micrometer, Non-Rotating Spindle, 0 to 1″/0 to 25.4mm Range, 0.00005″/0.001mm Resolution, Ratcheting Thimble Stop, LCD, SPC Data Output, Inch/Metric

Mitutoyo 406-350 Digital Outside Micrometer, Non-Rotating Spindle, 0 to 1″/0 to 25.4mm Range, 0.00005″/0.001mm Resolution, Ratcheting Thimble Stop, LCD, SPC Data Output, Inch/Metric - Low battery alarm. Ratcheting thimble stop for constant measuring force. Lcd for viewing inch/mm measurements and statistical process control (spc) data output. Non-rotating spindle eliminates torque on measured part. Measures 0 to 1″/0 to 254mm with 000005″/0001mm resolution and 000015″ accuracy for precise measurements.

 

Mitutoyo 153-203 Micrometer Head Non-Rotating Spindle 0-25mm Range 001mm Graduation -0003mm Accuracy Plain Thimble Flat Face

Mitutoyo 153-203 Micrometer Head, Non-Rotating Spindle, 0-25mm Range, 0.01mm Graduation, +/-0.003mm Accuracy, Plain Thimble, Flat Face

Mitutoyo 153-203 Micrometer Head, Non-Rotating Spindle, 0-25mm Range, 0.01mm Graduation, +/-0.003mm Accuracy, Plain Thimble, Flat Face - Vernier scale in metric units for taking precise measurements. Plain stem for mounting in a fixture with a split-body clamp or setscrew. Lapped carbide measuring face helps provide accuracy and wear resistance. Satin chrome finish helps resist rust and reduce glare. Non-rotating spindle helps prevent workpiece wear.

 

INSIZE 3280-2 Non Rotating Spindle Universal Micrometer 1-2 Graduation 00001

INSIZE 3280-2 Non Rotating Spindle Universal Micrometer, 1″-2″, Graduation 0.0001″

INSIZE 3280-2 Non Rotating Spindle Universal Micrometer, 1″-2″, Graduation 0.0001″ - Supplied with 7 pairs of anvil/spindle tip. Setting standards are included (except 0-1 inch. Non-rotating spindle ratchet stop.

 

INSIZE 3280-1 Non Rotating Spindle Universal Micrometer 0 - 1 Graduation 0001

INSIZE 3280-1 Non Rotating Spindle Universal Micrometer, 0″ – 1″, Graduation .0001″

INSIZE 3280-1 Non Rotating Spindle Universal Micrometer, 0″ – 1″, Graduation .0001″ - Optional accessary 55° anvil/spindle tip (part no 3280-sp1 and 3280-sp2). Setting standards are included (except 0-1 inch. Graduation 0001 inch. Supplied with 7 pairs of anvil/spindle tip.

 

Starrett 486MP-100 Blade-Type Micrometer Non-Rotating Spindle Plain Thimble 75-100mm Range 001mm Graduation

Starrett 486MP-100 Blade-Type Micrometer, Non-Rotating Spindle, Plain Thimble, 75-100mm Range, 0.01mm Graduation

Starrett 486MP-100 Blade-Type Micrometer, Non-Rotating Spindle, Plain Thimble, 75-100mm Range, 0.01mm Graduation - Non-rotating spindle helps provide steady positioning during measurement. Blade anvil and spindle for measurement of groove diameter of shafts and keyways. Vernier scale in metric units for taking precise outside diameter (od) measurements. Speeder helps provide quick adjustment capability. High-grade tool steel construction for durability.

 

Mitutoyo 369-252 LCD Disk Micrometer Non-Rotating Spindle Ratchet Stop 50-75mm Range 0001mm Graduation -0006mm Accuracy

Mitutoyo 369-252 LCD Disk Micrometer, Non-Rotating Spindle, Ratchet Stop, 50-75mm Range, 0.001mm Graduation, +/-0.006mm Accuracy

Mitutoyo 369-252 LCD Disk Micrometer, Non-Rotating Spindle, Ratchet Stop, 50-75mm Range, 0.001mm Graduation, +/-0.006mm Accuracy - Disc-shaped faces with flanges for measuring the pitch of gear teeth. Statistical process control (spc) output transmits results to a computer or external device through an interface cable (sold separately). Digital, single-value readout lcd displays in metric units for readability. Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement. Non-rotating spindle helps provide steady positioning during measurement.

 

Mitutoyo 197-201 Micrometer Head Non-Rotating Spindle Large Thimble 0-2 Range 00002 Graduation -00002 Accuracy Plain Thimble

Mitutoyo 197-201 Micrometer Head, Non-Rotating Spindle, Large Thimble, 0-2″ Range, 0.0002″ Graduation, +/-0.0002″ Accuracy, Plain Thimble

Mitutoyo 197-201 Micrometer Head, Non-Rotating Spindle, Large Thimble, 0-2″ Range, 0.0002″ Graduation, +/-0.0002″ Accuracy, Plain Thimble - Floating thimble allows easy zero setting at any spindle position. Dual-spindle mechanism for quick feeding of 1mm/rev. Bidirectional graduation for easy reading in both directions. Large thimble micrometer head with non-rotating spindle. Carbide tipped measuring face.

 

Mitutoyo 406-250 LCD Outside Micrometer Non-Rotating Spindle Ratchet Stop 0-25mm Range 0001mm Graduation -0003mm Accuracy

Mitutoyo 406-250 LCD Outside Micrometer, Non-Rotating Spindle, Ratchet Stop, 0-25mm Range, 0.001mm Graduation, +/-0.003mm Accuracy

Mitutoyo 406-250 LCD Outside Micrometer, Non-Rotating Spindle, Ratchet Stop, 0-25mm Range, 0.001mm Graduation, +/-0.003mm Accuracy - Digital, single-value readout lcd displays in metric units for readability. Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurements. Statistical process control (spc) output transmits results to a computer or external device through an interface cable (sold separately). Non-rotating spindle helps provide steady positioning during measurement. Carbide facing on spindle and anvil provides wear resistance.

 

Mitutoyo 123-125 0 - 1 X 001 Disk Micrometer 787 Dia Disks Ratchet Rotating Spindle

Mitutoyo 123-125, 0 – 1″ X .001″ Disk Micrometer, .787″ Dia. Disks, Ratchet, Rotating Spindle

Mitutoyo 123-125, 0 – 1″ X .001″ Disk Micrometer, .787″ Dia. Disks, Ratchet, Rotating Spindle - 001″, thimble ratchet, standard no, disk size. 787″ diameter, disk material hardened steel, comment rotating spindle. Mitutoyo disk micrometer, range 0, 1″, graduations.

 

Starrett 262ML Micrometer Head Non-Rotating Spindle 0-25mm Range 001mm Graduation -0002mm Accuracy Plain Thimble Lock Nut

Starrett 262ML Micrometer Head, Non-Rotating Spindle, 0-25mm Range, 0.01mm Graduation, +/-0.002mm Accuracy, Plain Thimble, Lock Nut

Starrett 262ML Micrometer Head, Non-Rotating Spindle, 0-25mm Range, 0.01mm Graduation, +/-0.002mm Accuracy, Plain Thimble, Lock Nut - Non-rotating spindle helps prevent wear to the workpiece. Satin chrome finish helps resist rust and reduce glare. Micro-lapped measuring face helps provide accuracy. Vernier scale in metric units for taking precise measurements to 25mm. Knurled ring-type lock nut to hold measurements in place.

 

INSIZE 3631-75 Non-Rotating Spindle Electronic Micrometer 2-350-75 mm

INSIZE 3631-75 Non-Rotating Spindle Electronic Micrometer, 2″-3″/50-75 mm

INSIZE 3631-75 Non-Rotating Spindle Electronic Micrometer, 2″-3″/50-75 mm - Resolution00005″/0001mm repeatability 00005″ measuring force 5-10n. Carbide measuring faces ratchet stop data output inch/mm, max/min tolerance measurement, hold, on/off, zero. Non-rotating spindle, for cylinders quick measurement one turn of sleeve or ratchet stop makes 039 inch. Supplied with setting standards (except 0-1 inch. Cr2032 battery, automatic power off.