Best and Coolest 21 Simpson Wedge Anchors

 

12-13 x 2 34 Simpson Wedge Anchor 316 SS 25

1/2-13 x 2 3/4 Simpson Wedge Anchor 316 SS (25)

1/2-13 x 2 3/4 Simpson Wedge Anchor 316 SS (25) - Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures. The threaded stud version is available in eight diameters and multiple lengths. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

38-16 x 3 Simpson Wedge Anchor 304 SS 50

3/8-16 x 3 Simpson Wedge Anchor 304 SS (50)

3/8-16 x 3 Simpson Wedge Anchor 304 SS (50) - The threaded stud version is available in eight diameters and multiple lengths. Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

 

58-11 x 4 12 Simpson Wedge Anchor 304 SS 20

5/8-11 x 4 1/2 Simpson Wedge Anchor 304 SS (20)

5/8-11 x 4 1/2 Simpson Wedge Anchor 304 SS (20) - A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut. The threaded stud version is available in eight diameters and multiple lengths. 5/8-11 x 4 1/2 simpson wedge anchor 304 ss (20), wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

12-13 x 7 Simpson Wedge Anchor 316 SS 25

1/2-13 x 7 Simpson Wedge Anchor 316 SS (25)

1/2-13 x 7 Simpson Wedge Anchor 316 SS (25) - Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures. The threaded stud version is available in eight diameters and multiple lengths. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

12-13 x 4 14 Simpson Wedge Anchor 316 SS 25

1/2-13 x 4 1/4 Simpson Wedge Anchor 316 SS (25)

1/2-13 x 4 1/4 Simpson Wedge Anchor 316 SS (25) - A one-piece clip ensures uniform holding capacity that increases as tension is applied. Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures. The threaded stud version is available in eight diameters and multiple lengths. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

58-11 x 3 12 Simpson Wedge Anchor 304 SS 25

5/8-11 x 3 1/2 Simpson Wedge Anchor 304 SS (25)

5/8-11 x 3 1/2 Simpson Wedge Anchor 304 SS (25) - Threaded studs are set by tightening the nut. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures. A one-piece clip ensures uniform holding capacity that increases as tension is applied. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

38-16 x 3 12 Simpson Wedge Anchor 316 SS 50

3/8-16 x 3 1/2 Simpson Wedge Anchor 316 SS (50)

3/8-16 x 3 1/2 Simpson Wedge Anchor 316 SS (50) - Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. The threaded stud version is available in eight diameters and multiple lengths. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

 

12-13 x 10 Simpson Wedge Anchor 303 SS 25

1/2-13 x 10 Simpson Wedge Anchor 303 SS (25)

1/2-13 x 10 Simpson Wedge Anchor 303 SS (25) - A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths. 1/2-13 x 10 simpson wedge anchor 303 ss (25), wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures.

 

58-11 x 8 12 Simpson Wedge Anchor 303 SS 20

5/8-11 x 8 1/2 Simpson Wedge Anchor 303 SS (20)

5/8-11 x 8 1/2 Simpson Wedge Anchor 303 SS (20) - Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. The threaded stud version is available in eight diameters and multiple lengths. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

 

58-11 x 6 Simpson Wedge Anchor 304 SS 20

5/8-11 x 6 Simpson Wedge Anchor 304 SS (20)

5/8-11 x 6 Simpson Wedge Anchor 304 SS (20) - Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied. The threaded stud version is available in eight diameters and multiple lengths.

 

78-9 x 6 Simpson Wedge Anchor 304 SS 5

7/8-9 x 6 Simpson Wedge Anchor 304 SS (5)

7/8-9 x 6 Simpson Wedge Anchor 304 SS (5) - The threaded stud version is available in eight diameters and multiple lengths. Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

12-13 x 7 Simpson Wedge Anchor 304 SS 25

1/2-13 x 7 Simpson Wedge Anchor 304 SS (25)

1/2-13 x 7 Simpson Wedge Anchor 304 SS (25) - The threaded stud version is available in eight diameters and multiple lengths. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

 

78-9 x 12 Simpson Wedge Anchor 303 SS 5

7/8-9 x 12 Simpson Wedge Anchor 303 SS (5)

7/8-9 x 12 Simpson Wedge Anchor 303 SS (5) - Threaded studs are set by tightening the nut. The threaded stud version is available in eight diameters and multiple lengths. A one-piece clip ensures uniform holding capacity that increases as tension is applied. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A single size tie-wire version is available for wire supported fixtures.

 

1 14-7 x 9 Simpson Wedge Anchor 316 SS 5

1 1/4-7 x 9 Simpson Wedge Anchor 316 SS (5)

1 1/4-7 x 9 Simpson Wedge Anchor 316 SS (5) - Threaded studs are set by tightening the nut. The threaded stud version is available in eight diameters and multiple lengths. A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures. 1 1/4-7 x 9 simpson wedge anchor 316 ss (5), wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

34-10 x 4 34 Simpson Wedge Anchor 304 SS 10

3/4-10 x 4 3/4 Simpson Wedge Anchor 304 SS (10)

3/4-10 x 4 3/4 Simpson Wedge Anchor 304 SS (10) - Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures.

 

58-11 x 7 Simpson Wedge Anchor 304 SS 20

5/8-11 x 7 Simpson Wedge Anchor 304 SS (20)

5/8-11 x 7 Simpson Wedge Anchor 304 SS (20) - A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures. The threaded stud version is available in eight diameters and multiple lengths. Threaded studs are set by tightening the nut. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

34-10 x 5 12 Simpson Wedge Anchor 316 SS 10

3/4-10 x 5 1/2 Simpson Wedge Anchor 316 SS (10)

3/4-10 x 5 1/2 Simpson Wedge Anchor 316 SS (10) - The threaded stud version is available in eight diameters and multiple lengths. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A single size tie-wire version is available for wire supported fixtures. Threaded studs are set by tightening the nut. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

 

12-13 x 4 14 Simpson Wedge Anchor 304 SS 25

1/2-13 x 4 1/4 Simpson Wedge Anchor 304 SS (25)

1/2-13 x 4 1/4 Simpson Wedge Anchor 304 SS (25) - Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. Threaded studs are set by tightening the nut. The threaded stud version is available in eight diameters and multiple lengths. A one-piece clip ensures uniform holding capacity that increases as tension is applied. A single size tie-wire version is available for wire supported fixtures.

 

58-11 x 12 Simpson Wedge Anchor 303 SS 10

5/8-11 x 12 Simpson Wedge Anchor 303 SS (10)

5/8-11 x 12 Simpson Wedge Anchor 303 SS (10) - The threaded stud version is available in eight diameters and multiple lengths. A one-piece clip ensures uniform holding capacity that increases as tension is applied. Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry.

 

1-8 x 6 Simpson Wedge Anchor 303 SS 5

1-8 x 6 Simpson Wedge Anchor 303 SS (5)

1-8 x 6 Simpson Wedge Anchor 303 SS (5) - A one-piece clip ensures uniform holding capacity that increases as tension is applied. Threaded studs are set by tightening the nut. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. The threaded stud version is available in eight diameters and multiple lengths. A single size tie-wire version is available for wire supported fixtures.

 

34-10 x 6 14 Simpson Wedge Anchor 316 SS 10

3/4-10 x 6 1/4 Simpson Wedge Anchor 316 SS (10)

3/4-10 x 6 1/4 Simpson Wedge Anchor 316 SS (10) - The threaded stud version is available in eight diameters and multiple lengths. Threaded studs are set by tightening the nut. A single size tie-wire version is available for wire supported fixtures. Wedge-all® wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.