Best and Coolest 23 Fusion Splicers

 

SPEEDWOLF 5 LCD High Precision Fiber Optic Fusion Splicer Machine for SM MM NZ-DS EDF Fibers with Optical Fiber Cleaver and Automatic Focus FunctionOP-FS18

SPEEDWOLF 5″ LCD High Precision Fiber Optic Fusion Splicer Machine for SM, MM, NZ-DS, EDF Fibers with Optical Fiber Cleaver and Automatic Focus Function(OP-FS18)

SPEEDWOLF 5″ LCD High Precision Fiber Optic Fusion Splicer Machine for SM, MM, NZ-DS, EDF Fibers with Optical Fiber Cleaver and Automatic Focus Function(OP-FS18) - 5 inches high resolution colorful lcd displayaverage splice time 10 secondaverage tube-heat time 30 second. New developed technology providing wind and dust resistance splicing mode:auto & manual & full-automation. Multipurpose optical fiber fixture (such as rubber-insulated wire, fiber optic patch cord, bare fiber). Support usb port storing 6,000 groups of splice results. Lithium battery up to 180 times of continuous splice and heatsimultaneous x and y views with 180 times magnification.

 

Fusion Splicer Electrodes - Ericsson FSU 925975995 Fusion Splicers

Fusion Splicer Electrodes – Ericsson FSU 925,975,995 Fusion Splicers

Fusion Splicer Electrodes – Ericsson FSU 925,975,995 Fusion Splicers - Model no fsu-995. One pair of brand new fusion splicer electrodes for ericsson fsu 925, 975, and 995 fa and pm fusion splicer models.

 

Handheld Fiber Optic Fusion Splicer KOMSHINE GX36 Core to Core Aliginment with 9 Languages

Handheld Fiber Optic Fusion Splicer KOMSHINE GX36 Core to Core Aliginment with 9 Languages

Handheld Fiber Optic Fusion Splicer KOMSHINE GX36 Core to Core Aliginment with 9 Languages - Komshine gx36 optical fiber fusion splicer kit with fiber optic cleaver core-core alignement fiber splicerlanguages english,italian,spanish,franch,português,Русский ,bahasa indonesia,traditional chinese & simple chinese real core to core alignment fiber core visible on the screen average splicing loss 0. 657)return loss>60dboperation methodsauto, manualcutting length8~16mm(fiber diameter. 02db 7800mah huge capacity battery up to 300 splicing & heating can splice 250um, 900um, flat cable and fiber jumper tech1 7800mah high capacity replaceable battery to extend your productivitytech2 6 motors 3 axle alignment make lower lossproduct descriptionfeaturesshake proof, dust proof and water proof splice30 seconds for heatingaverage splicing loss 0. 9mm/3. 0mm/ flat cableattached night lighspecificationsapplicable fiberssm / mm / ds / nzds / bif & ubif (g. 02dbup to 200 times of continuous splices and heathd cmos sensor and hd aligner for duble seperate optical fibers0. 25mm/0.

 

Fusion Splicer Sumitomo Type-81C

Fusion Splicer Sumitomo Type-81C

Fusion Splicer Sumitomo Type-81C - Upgrades software via internet remote interactive maintenance via internet. Compact & lightweight with only 21 kg weight including battery automatic arc calibration. Ultra fast splicing 7 sec ultra fast heating 28 sec g657 fiber auto-splice function. Supports bi-directional splicing operation dust-resistant, water-resistant and shock-proof. Touch-screen operation equipped with onboard user training video.

 

Fujikura Ribbon Fusion Splicer Welding Splicer FSM-70R With CT-30 Cleaver and Other Standard Accessories Multi Language

Fujikura Ribbon Fusion Splicer Welding Splicer FSM-70R With CT-30 Cleaver and Other Standard Accessories Multi Language

Fujikura Ribbon Fusion Splicer Welding Splicer FSM-70R With CT-30 Cleaver and Other Standard Accessories Multi Language - Package accessories fujikura 70r ribbon fusion splicer btr-09 battery, dcc-18 battery charge cord ct-30 cleaver, hjs-02 stripper, adc-18 ac adapter, acc-14 ac cord, elct2-20a spare electrodes (pair), fh-50-12 fiber holder, usb cable, alcohol dispenser, screw driver, sleeve loader, splicer carrying strap, quick reference guide, video instruction manual and cc30 transit case with carrying strap. Reduced splicing time, 7 seconds only. Ribbon fusion splicer. Multi language, include 17 kinds language. Splices all known types of fibers fiber core alignment typical average splice loss for single mode cable with g652d fiber is only 002 db reduced splicing time, 7 seconds only heating time, 14 seconds only.

 

Fusion Splicer ORIENTEK T40

Fusion Splicer ORIENTEK T40

Fusion Splicer ORIENTEK T40 - High-resolution true color 57-inch lcd display real time calibrating system interfaces usb, vga. Magnification up to 304 times 8 sec splicing time 25 sec tube heating time. The advanced core to core fiber profile alignment systemsimultaneous displaying of x/y axes. Usb interface for software updates and transferring results to external devices. Four display modes, fiber core visible storing 6000 groups of splicing results.

 

Fiber Splicing Machine FX35 Fusion Splicer Fibra encoladora de la fusión  QX50-S Fiber Optic OTDR Optical Time Domain Reflectometer  Optic Power Meter  Laser Source  KFL-10-1 NW

Fiber Splicing Machine FX35 Fusion Splicer Fibra encoladora de la fusión + QX50-S Fiber Optic OTDR Optical Time Domain Reflectometer + Optic Power Meter + Laser Source + KFL-10-1 NW

Fiber Splicing Machine FX35 Fusion Splicer Fibra encoladora de la fusión + QX50-S Fiber Optic OTDR Optical Time Domain Reflectometer + Optic Power Meter + Laser Source + KFL-10-1 NW - Splice time , 25 sec. Automatic ftth fiber optic splicing machine komshine fx35 optical fiber fusion splicer, qx50-s singlemode otdr+power meter+laser source+vflfeatures for fx35 fusion splicer the advanced core to core fiber profile alignment system(pas)8 sec. 7 inch lcd displayfour display modes, fiber core visiblefour display modes, fiber core visiblelong electrode lifetime, up to 4000 timesthree splicing modes auto, half-auto, manualclose shield splice automatically, close heater lid heat automaticallyone year warranty komshine qx50-s singlemode sm 1310/1550nm 32/30db otdrbuilt-in visual light source come with fc+sc+lc adaptors test results analysis softeware features800 tracesbuilt-in lithium battery with high capacity for over 8 hours of operating lifedisplay color lcdone year warrantstandard package for fx35fx35 fusion splicerkfc-33 high precision fiber cleavertri-hole fiber coat stripperkimwipes lint-wipers 280 wipers/boxinstruction cdfusion splice protection sleeves 500eainternal batterycharger, ac power cordspare electrodes (one pair) cooling tray, alcohol pump bottle, blower brush user manualcarrying casestandard package for qx50-sqx50 otdr fc+sc+lc upc connectorssm fiber optic patch cord fc-sc 1mtesting & calibration report ac/dc adapterquality certificationtrace analyzing software(cd)internal batteryuser manualcarrying case. Tube-heat timehig high-resolution true color 5.

 

FTTH Fiber Optic Welding Machine Ruiyan RY-F600P Splicing Tool Automatically Function Optical Fiber Fusion Splicer

FTTH Fiber Optic Welding Machine Ruiyan RY-F600P Splicing Tool Automatically Function Optical Fiber Fusion Splicer

FTTH Fiber Optic Welding Machine Ruiyan RY-F600P Splicing Tool Automatically Function Optical Fiber Fusion Splicer - Digital fusion splicer with automatic focus function. Auto detect cleaved endface fault,display fiber cleaved and offset angle. Usb & vgainterface,software upgrade via usb interface. Display core and clad offset,56 inch tft color lcd monitor with clear digital image display. Fiber core can be display clearly,single x or y view and x & y view simultaneously.

 

One pair Fiber Fusion Splicer Electrodes Rod for FSM-50SFSM-60SFSM-80SFSM-70S Fusion Splicer Electrodes OEM Fiber electrodes made in China

One pair Fiber Fusion Splicer Electrodes Rod for FSM-50S/FSM-60S/FSM-80S/FSM-70S Fusion Splicer Electrodes, OEM Fiber electrodes made in China

One pair Fiber Fusion Splicer Electrodes Rod for FSM-50S/FSM-60S/FSM-80S/FSM-70S Fusion Splicer Electrodes, OEM Fiber electrodes made in China - Each electrode is manufactured to exceed the specifications required for the fiber optic industry. Manufacturer description our replacement electrodes last just as long as the original equipment parts they replace but for half the price. Every fusion splicer electrode is 100% individually inspected to ensure that they adhere to our stringent tolerances. One pair fiber fusion splicer electrodes rod for fsm-50s/fsm-60s/fsm-80s/fsm-70s fusion splicer electrodes, oem fiber electrodes made in china specific details electrodes for fujikura fsm-50s/fsm-60s/fsm-80s/fsm-70s fusion splicer product description price is for 1 pair of new electrodes compatible with the fujikura fsm-50s/fsm-60s/fsm-80s/fsm-70s fusion splicer. New fusion splicer electrodes can increase productivity through limiting re-work.

 

INNO View 12R Fusion Splicer Ribbon 3-yr Warranty

INNO View 12R Fusion Splicer, Ribbon (3-yr Warranty)

INNO View 12R Fusion Splicer, Ribbon (3-yr Warranty) - Motorized clamp alignment system view 12r’s advanced clamp activates itself in accordance with the position of fiber so that each core of individual fiber is correctly placed on its assigned v-groove. There is no doubt that this process enables more accurate and reliable splicing process. View 12r ensures the most reliable work experiences to our valuable customers. View 12r provides maximum work efficiency through the fast splicing & heating time, ultra-high battery capacity of 220 splice / heat cycles, and universal holder both for 250μm & 900μm single fiber. Its advanced automatic clamp alignment system offers more accurate and dependable ribbon fiber splicing up to 12 fibers with the double-tapping (zoom in & out) to the world’s highest magnification of 250x. View 12r, a ribbon splicer, with the fully motorized clamp alignment system, is the most powerful and state-of-the-art ribbon splicer in the market.

 

Fujikura 62S Fiber Optic Fusion Splicer for SM MM DS NZDS

Fujikura 62S Fiber Optic Fusion Splicer for SM MM DS NZDS

Fujikura 62S Fiber Optic Fusion Splicer for SM MM DS NZDS - Electrodes for fsm-60s, fsm-50s, fsm-18s, fsm-18r fusion splicers (one pair). Brand namekelushi. Fix for fsm-17s,18s,50s,60s,80s. Applicable fibers sm (g652 and g657), mm (g651), ds (g653), nzds (g655) cladding diameter 80 μm to 150 μm coating diameter 100 μm to 1,000 μm fiber cleave length 5 to 16 mm li-ion battery with 200 splices/shrinks per charge. Material typefusion splicer electrodes tungsten.

 

New JILONG KL-300T Mini FTTx Fusion Splicer fusion splicing machine with Fiber Cleaver Fiber Stripper

New JILONG KL-300T Mini FTTx Fusion Splicer fusion splicing machine with Fiber Cleaver, Fiber Stripper

New JILONG KL-300T Mini FTTx Fusion Splicer fusion splicing machine with Fiber Cleaver, Fiber Stripper - The 300 triumphs in attributes like a 39 second splice/shrink cycle time, the second highest magnification on the market and lighter weight than all other standard fusion splicers. 652), mm (itu-t g. Cooling tray12. In side by side specification comparisons the kl comes up first in more categories than the big three, fujikura, sumitomo or fitel. Feathercore to core alignment by pas technology -(pasprofile alignment system)digital fusion splicer with automatic focus functionfiber core can be display clearlyauto detect cleaved endface faultdisplay fiber cleaved and offset angledisplay core and clad offset5. 653), nzds (itu-t g. Ac adaptor7. Custom hard carrying case10. Internal rechargeable li battery6. Spare electrodes11. 655)fiber diametercladding diameter80 ~150um coating diameter100~ 1000umfiber aligning methodcore or clad aligningsplicing timetypical 9 sec,with standard sm fiberreturn loss>60dbterminalsusb 1. Fc-6s/ kfc-33 high precision fiber cleaver3. 651), ds (itu-t g. Ac power cord8. Jilong kl-300t fusion splicer2. 6 inch tft color lcd monitor with clear digital image displayusb & vga interfacesoftware upgrade via usb interfacespecificationapplicable fiberssm (itu-t g. Cleaning tools 13. Usb download cable9. 1 and vgapower supplyac 100-240v with ac adapter inner li-battery(6600mah)standard package1. Fiber cleaver carrying case4. Fis fiber stripper5. Operating manual. Jilong kl-300t core-core & clad-clad alig optic fiber fusion splicer w/ cleaver– come with calibration certificate and test report — come with the kfc-33 new fiber cleaverthe kl-300t core alignment fiber optic fusion splicer made by jilong communication is a solid reliable addition to any technician’s tooling.

 

Optical Fiber Fusion Splicer with Automatic Focus Function - Signal Fire AI-8

Optical Fiber Fusion Splicer with Automatic Focus Function – Signal Fire AI-8

Optical Fiber Fusion Splicer with Automatic Focus Function – Signal Fire AI-8 - 5 hours, continuous splicing and heating about 240 times ● power input ac100-240v 50 / 60hz, output dc13. 04db (ds/nzds) ● 7800 ma high-capacity lithium battery, charging time ≤ 3. 01db(mm) 0. Automatic focus function ● 6 seconds splicing time ●15 seconds heating time ● sm, mm,ds,nzds fibers ● core to core alignment, adopt pas fiber adjustment (alignment) technology ● 5 inch tft color display ● six motors auto focus ● splice loss 0. 025db (sm), 0. 5v / 4a ● temperature -15 ~ +50 ℃, humidity.

 

BestEquip Fusion Splicer 5Inch LED Fiber Optic Fusion Splicer JW4108S FTTH Fusion Splicer Kit with Optical Fiber Cleaver for SM MM DS NZDS

BestEquip Fusion Splicer 5Inch LED Fiber Optic Fusion Splicer JW4108S FTTH Fusion Splicer Kit with Optical Fiber Cleaver for SM, MM, DS, NZDS

BestEquip Fusion Splicer 5Inch LED Fiber Optic Fusion Splicer JW4108S FTTH Fusion Splicer Kit with Optical Fiber Cleaver for SM, MM, DS, NZDS - Fiber splicer can be widely used in scientific research, laboratory, teaching equipment, integrated wiring system, telecommunication engineering and maintenance, construction and maintenance of other networks. Fiber alignment core to core alignment by pas technology splicing mode manual, half auto, auto. Splicing type sm, mm, ds, nzds splicing loss 002db(sm), 001db(mm), 004db(ds), 004db(nzds). The temperature, humidity and barometric real-time compensation system greatly enhances the ability to adapt to poor external environmental changes. Fusion splicer is built in high-capacity lithium battery, can be completed 200 times and heating.

 

Core-core alignment Fusion Splicer GX36QX50-S SM13101550 nm 3230dB OTDROptic Power MeterLaser SourceVFL 1MW with cleaver With QX50-S 13101550nm3230dB inclVFL

Core-core alignment Fusion Splicer GX36+QX50-S SM1310/1550 nm 32/30dB OTDR+Optic Power Meter+Laser Source+VFL 1MW with cleaver (With QX50-S 1310/1550nm,32/30dB incl.VFL)

Core-core alignment Fusion Splicer GX36+QX50-S SM1310/1550 nm 32/30dB OTDR+Optic Power Meter+Laser Source+VFL 1MW with cleaver (With QX50-S 1310/1550nm,32/30dB incl.VFL) - Pocket size visual fault locator- 1 year manufacturer’s warranty. 3 to180memory capacity of trace =sd card (4g), > 10000 piecesduration of measurement=defined by user 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectableoptical interface=fc/upc+sc/upc+lc/upcdata interface=usb interface, sd card interfacevisual fault locator=availablepower supply =lithium battery continuing working duration ≥ 8 hourswarranty period =12 months3 mini optical power meter + mini light source + visual fault locator includes- 1. 05db/dbloss threshold (db)=0. 5 inch tft lcd touch screenevent blind zone(m)=3attenuation blind zone (m)=13linearity (db/db)=±0. 125 to 8sampling point =32kdistance uncertainty (m)=±(1 m + 5×10-5× distance + sampling interval)distance scope (km)=0. 01sampling resolution ratio (m) =0. Komshine qx50 sm 1310/1550nm 32/30db otdr with fc/upc+sc/upc+lc/upc connectorsspecificationsmodel=qx50-swavelength(nm)=1310/1550dynamic range(db)=32/30pulse width (ns) = 5, 20 ,40,80, 160, 320 ,640,1280, 2560 ,5120,10240 ,20480display=6. Komshine gx36 fusion splicer kit:• gx36 fusion splicer• high precision kf-52 cleaver integrated scrap catcher• high precision fiber stripper• battery built-in• ac adapter/battery charger• power cable• spare electrodes• carrying case• cooling tray• fusion splice protection sleeves 200pcs• 1 year warranty2. Komshine optical fiber fusion splicer gx36+qx50-s sm1310/1550 nm 32/30db otdr+optic power meter+laser source+vfl 1mw with cleaverthe fusion splicer & otdr combos include1. 05loss resolution ratio (db) =0. Dual wavelengths 1310/1550nm optical light source for sm- 3. Six wavelenghts optical power meter for sm & mm- 2.

 

57 LED With 48000 Cleaves Komshine FX35 Optical Fiber Fusion Splicer for SMMMDSNZDS with Authomatic Focus Fuction

5.7 LED With 48000 Cleaves Komshine FX35 Optical Fiber Fusion Splicer for SM/MM/DS/NZDS with Authomatic Focus Fuction

5.7 LED With 48000 Cleaves Komshine FX35 Optical Fiber Fusion Splicer for SM/MM/DS/NZDS with Authomatic Focus Fuction - 5vweight2. Kf-52 high precision fiber cleaver-1pc3. Spare electrodes-1pair10. 55kg excluding battery,3. Cooling tray, alcohol pump bottle,blower brush-1pc11. Carrying case-1pc. Fusion splice protection sleeves-100pc7. Fx35 fusion splicer-1pc2. Charger, ac power cord-1pc9. Tri-hole fiber coat stripper-1pc4. Kimwipes lint-wipers 280 wipers/box-1pc5. Internal battery-1pc8. Instruction cd-1pc6. 05kg including batterystandard package1. 7 inch color lcd monitorelectrode life4000terminalusb power supplyac 100-240v with ac adapter inner li-battery (7800mah) dc 13. Real core alignment splicing machine fx35,60dbfiber aligning methodmeticulous,core,clad,manualtube typical heating timetypical 25 secstorage of splice result4000 results, 20 parameter per resultfiber image magnification300x (x or y view),150x (x and y view)battery capacitytypical 160 cycles (splice/tube heat with inner li-battery)monitor5. User manual-1pc12.

 

Fusion Splicer Kit KOMSHINE GX36 w Cleaver  QX50-MS MM 85013101550nm OTDR Tester OPM  OLS Visual Fault Locator VFLRed Light Pen With QX50-MS 85013101550nm211928dB

Fusion Splicer Kit KOMSHINE GX36 w/ Cleaver + QX50-MS MM 850/1310/1550nm OTDR Tester +OPM + OLS+ Visual Fault Locator/ VFL/Red Light Pen (With QX50-MS 850/1310/1550nm,21/19/28dB)

Fusion Splicer Kit KOMSHINE GX36 w/ Cleaver + QX50-MS MM 850/1310/1550nm OTDR Tester +OPM + OLS+ Visual Fault Locator/ VFL/Red Light Pen (With QX50-MS 850/1310/1550nm,21/19/28dB) - Komshine gx36 fusion splicer kit:• gx36 fusion splicer• high precision kf-52 cleaver integrated scrap catcher• high precision fiber stripper• battery built-in• ac adapter/battery charger• power cable• spare electrodes• carrying case cooling tray• fusion splice protection sleeves 200pcs• 1 year warranty2. Dual wavelengths 1310/1550nm optical light source for sm- 3. Six wavelenghts optical power meter for sm & mm- 2. Mini optical power meter + mini light source + visual fault locator includes, 1. Pocket size visual fault locator- 1 year manufacturer’s warranty. Komshine qx50-ms multimode 850/1310/1550nm 21/30/28 db otdr with fc/upc+sc/upc+lc/upc connectors featuresapplicable fiber networks with plc splitters800 tracesbuilt-in lithium battery with high capacity for over 8 hours of operating lifedisplay color lcdone year warranty 3. Komshine brand new gx36 fusion splicer kit w/ cleaver + qx50-ms multimode 850/1310/1550nm otdr+ optical power meter + optical light source+visual fault locatorthe fusion splicer & otdr combos include1.

 

Mophorn Fusion Splicer 5Inch LED Fiber Optic Splicing Machine Optical Fiber JW4108S FTTH High Precision Fusion Splicer Kit with Optical Fiber Cleaver

Mophorn Fusion Splicer 5Inch LED Fiber Optic Splicing Machine Optical Fiber JW4108S FTTH High Precision Fusion Splicer Kit with Optical Fiber Cleaver

Mophorn Fusion Splicer 5Inch LED Fiber Optic Splicing Machine Optical Fiber JW4108S FTTH High Precision Fusion Splicer Kit with Optical Fiber Cleaver - Modeljw4108s ftth fusion splicerbattery capacity200cycles splicing and heating,3 hours charging time. This fusion splicer tool is used for ftth and ordinary fiber project ,adopt core to core alignment by pas technology. This fusion splicer machine display 5 inch tft lcd touch screen,observe x and y view at same time. 8 sec splicing time and 30 sec heat time 300 x or y view, 200 x and y view. Splicing typesm,mm,ds,nzdssplicing loss002db(sm),001db(mm),004db(ds),004db(nzds).

 

Fujikura 70S Fusion Splicer

Fujikura 70S Fusion Splicer

Fujikura 70S Fusion Splicer - The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. Software update option. Features splices all known types of fibers. Battery btr-09 is included. 2 years of full warranty with the device replacement. Rotary color anti-glare lcd 4. Battery life increased up to 200 full splicing/heating cycles. Operation manual is installed into the splicer. Automatic wind-protective lid, heater, fiber holders. 02 db. 655) for telecommunication use, pon/fttx networks, etc. Reduced splicing time, 7 seconds only. New comfortable carrying case, optimized for quick operation start. May splice sc, lc, mpo connectors. For user comfort the package contains a convenient working table, where you may place the needed tools a cleaver, a stripper, sleeves, etc. 652d fiber is only 0. Heating time, 14 seconds only. It may be powered from 110/220 v ac, or using a battery (included). 73″, high contrast and vividness. 652/657), mm (g. 653), nzdsf (g. Splicing takes only 7 seconds, and heating takes only 14 seconds. Typical average splice loss for single mode cable with g. Fujikura 70s fusion splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers sm (g. The case may be used as a working table. Increased electrode lifetime, up to 3000 splicing cucles with one set, without splicing quality loss. Increased water, dust and shock resistance, may be used under severe environment conditions. Simultaneous display of x and y axes. 651), dsf (g. Automatic arc calibration. Fiber core alignment.

 

Original Japan FITEL S178A V2 Fusion Splicer w CT-30A Cleaver Core Aliginment ARC Welding Machine

Original Japan FITEL S178A V2 Fusion Splicer w/ CT-30A Cleaver, Core Aliginment ARC Welding Machine

Original Japan FITEL S178A V2 Fusion Splicer w/ CT-30A Cleaver, Core Aliginment ARC Welding Machine - 0 minidisplaying language20 languages (e. G. 04 dbsplice time7 seconds (semi-auto mode),9 seconds (regular mode)heat time25 seconds (s922 40 mm sleeve, s921 60 mm sleeve)(pre-heat mode)31 seconds (s922 40 mm sleeve, s921 60 mm sleeve)(regular mode)splice programsup to 150automatic heating startavailableapplicable sleeves20/40/60mmfiber image magnification304x, 608xsplice memorymax. 2. 9 kg (without battery), 2. 2,000image capture capacitylast 100 images to be automatically captured + up to 24 images to be stored permanentlyaltitude5,000 mweight1. G. 5’color lcd monitordata outputusb ver. Ez-bend®fibers)•easily exchanged fiber holder systems (tight holder/fiber holder/soc holder)•auto-start shrink sleeve oven feature•large memory for storage of splice data (2,000) and images (100)specificationsapplicable fiberssm,mm,dsf,nzd,edf,bif/ubifcladding diameter80~150µmcoating diameter160~900µmfibers cleave length5~16 mmaverage splice losssm0. 01db,dsf0. 3 kg (with two batteries)monitor3. 04db,nzd 0. Original japan fitel s178a v2 fusion splicer w/ ct-30a cleaver, core aliginment arc welding machinefeatures•fast splicing (7 seconds) at super low loss and fast heating (25 seconds) •200 cycles(splicing & heating)with new battery configuration•available for all metro/lan/fttx fibers including ultra bend optimized fibers (e. English, spanish, japanese, chinese)battery capacitytypical 80 splice/heat cycles with single battery 7typical 200 splice/heat cycles 8operating temperature-10℃to +50℃(without excessive humidity)storage temperature-40℃to +60℃(without excessive humidity)standard packagefitel s178a 1pcsct-30a cleaver 1pcsbattery 1pcsfiber stripper 1pcscarrying case 1pcs. 02db,mm0.

 

INNO View 5 Fusion Splicer Core-Alignment for SM MM DS NZDS with V7 Cleaver

INNO View 5 Fusion Splicer Core-Alignment for SM, MM, DS, NZDS with V7 Cleaver

INNO View 5 Fusion Splicer Core-Alignment for SM, MM, DS, NZDS with V7 Cleaver - 5″ color lcd touch screen double tapping (zoom in & out) detachable soc holder and heating oven for splice-on connectors. Core alignment splicing (dacas digital analysis core alignment system). Package accessoriesview 5 fusion splicer v7 high precision cleaver vfh-40 / fh-soc fiber holder js-180300 ac adapter cg-22 cooling tray e-50 electrodes eg-18 electrode grinder manual cd lbt-40 battery pack acc-25 power cable cj-11 cigarette light cable nbx-35 carrying case. 3 bright leds for dark environments ceramic clamp for improved durability easy to replace electrodes mirrorless design for easy maintenance. The highest 520x magnification and resolution.

 

Manufacturer of Optical Fiber Fusion Splicer Signal Fire AI-7

Manufacturer of Optical Fiber Fusion Splicer (Signal Fire AI-7)

Manufacturer of Optical Fiber Fusion Splicer (Signal Fire AI-7) - 5v / 4a ● temperature -15 ~ +50 ℃, humidity. 04db (ds/nzds) ● 7800 ma high-capacity lithium battery, charging time ≤ 3. 8 seconds splicing time ●18 seconds heating time ● sm, mm,ds,nzds fibers ● core to core alignment, adopt pas fiber adjustment (alignment) technology ● 5 inch tft color display ● six motors auto focus ● splice loss 0. 025db (sm), 0. 01db(mm) 0. 5 hours, continuous splicing and heating about 240 times ● power input ac100-240v 50 / 60hz, output dc13.

 

SB Scandinavia EasySplicer Fiber Optic Fusion Splicer for SM MM

SB Scandinavia EasySplicer Fiber Optic Fusion Splicer for SM MM

SB Scandinavia EasySplicer Fiber Optic Fusion Splicer for SM MM - 2. 6. Sb scandinavia easysplicer is a small and handy fiber optic fusion splicer designed for working daily with fiber optic installations. 5. Fiber cleaver, 1 pc. Fiber stripper, 1 pc. Fiber holders (250 μm and 900 μm), 2 pairs 3. Made in sweden. It has a rugged design and may be used for outdoor applications. 01 db mmf • typical cycle time 7 s + 35 s (splice cycle + oven cycle) • sleeve dimensions max 64 mm length, 2-5 mm diameter supported by oven • communication usb, mini usb plug • memory internal 1 mb • external sd-card • monitor lcd, color, 2,8″, 320×240 pixels • magnification camera 140x • operating environment 0-40°c, max 95% rh • power sources external power supply, 6 v, 1. Carrying case, 1 pc. Power supply adapter, 1 pc. Features • used for singlemode and multimode fibers • less than 7 seconds splicing time • loss estimation • fiber fault detection • perfect for ftth installation technical specifications • splicing method v-grove (cladding alignment) • fiber types smf, mmf 50/125 µm fiber, 250 µm primary and 900 µm secondary coated fiber • fiber handling fiber holders, 2 pairs (250 and 900 µm) • splice programs 2 pre-defined. 03 db smf, 0. Easysplicer is one of the most inexpensive fusion splicers on the market. Easysplicer was designed for all the newcomers in the business installers of ftth, electricians (who are getting more and more fiber jobs to do) and tv-installers (merging from digital-tv to fiber). 4. Easysplicer fusion splicer, 1 pc. Smf & mmf • typical splice loss 0. 25 a, 100-240 v ac 50-60 hz • built-in li-ion battery pack • splicing capacity 60 splicing cycles • weight 800 g package contents 1.