Best and Coolest 24 Brass Gate Valves

 

Smith-Cooper International 8104 Series Brass Gate Valve Non-Rising Stem Inline 34 Solder End Non-Potable Water Use Only

Smith-Cooper International 8104 Series Brass Gate Valve, Non-Rising Stem, Inline, 3/4″ Solder End, Non-Potable Water Use Only

Smith-Cooper International 8104 Series Brass Gate Valve, Non-Rising Stem, Inline, 3/4″ Solder End, Non-Potable Water Use Only - Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use. Solder ends for a strong and durable heat-joined bond using solder and a torch. Product contains brass which does not meet federal and state requirements for drinking water. 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog). Made from brass for higher corrosion resistance than steel. Top-mounted hand wheel for lowering and lifting the gate.

 

Legend Valve 104-723NL S-408 No Lead Brass Gate Valve 12

Legend Valve 104-723NL S-408 No Lead Brass Gate Valve, 1/2″

Legend Valve 104-723NL S-408 No Lead Brass Gate Valve, 1/2″ - Recommended for non-steam use in residential applications. Legend models t-408/s-408 gate valves are constructed of heavy duty cast brass. They have a screwed bonnet, non-rising stem, solid wedge disc, and integral seats. Body and bonnet are connected with a tight metal to metal leak-proof seat. The t-408/s-408 is legend’s newest entry into the competitive gate valve market.

 

Dixon BGV200 Brass Gate Valve 2 NPT Female

Dixon BGV200 Brass Gate Valve, 2″ NPT Female

Dixon BGV200 Brass Gate Valve, 2″ NPT Female - Iron handwheel. Solid wedge disc. 2″ npt female. Female npt threaded ends. Integral seat. Threaded bonnet. Rated 200 psi non-shock cold water, oil or gas. Adjustable packing nut. Brass gate valve. 100 percent factory tested. Non-rising stem.

 

Brass Gate Valve 2

Brass Gate Valve, 2″

Brass Gate Valve, 2″ - Non-rising stem. 200 psi wog. Not available in vermont or california. Meets california prop. 65 drinking water standards and ansi/nsf 61-8. Solid wedge disc.

 

Dixon 14 BRASS GATE VALVE BGV25

Dixon 1/4″ BRASS GATE VALVE (BGV25)

Dixon 1/4″ BRASS GATE VALVE (BGV25) - Supplier dixon®material brasssize 1/4″pressure rating 200 psi wog, cold non-shockweight (lb) 0. Do not use in connection with drinking water. 63use non-shock cold water, oil or gasfeatures female npt threaded ends threaded bonnet integral seat adjustable packing nut non-rising stem solid wedge disc 100% factory testedconstruction iron handwheelsafety notes warning this product contains a chemical known to the state of california to cause birth defects or other reproductive harm. Wash hands after handling.

 

Smith-Cooper International 8501L Series Brass Gate Valve Potable Water Service Non-Rising Stem Inline 1-12 NPT Female

Smith-Cooper International 8501L Series Brass Gate Valve, Potable Water Service, Non-Rising Stem, Inline, 1-1/2″ NPT Female

Smith-Cooper International 8501L Series Brass Gate Valve, Potable Water Service, Non-Rising Stem, Inline, 1-1/2″ NPT Female - 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog). Top-mounted hand wheel for lowering and lifting the gate. Non-rising brass stem stays fixed in place when gate is raised or lowered for low clearance use. Female national pipe taper (npt) threads for connecting to male threaded pipes. Made from brass for higher corrosion resistance than steel.

 

Wesco 272034 Heavy Duty Brass Gate Valve 2 NPT Connection

Wesco 272034 Heavy Duty Brass Gate Valve, 2″ NPT Connection

Wesco 272034 Heavy Duty Brass Gate Valve, 2″ NPT Connection - 2-inches npt connection. Wesco heavy duty brass gate valve has fast, self-closing ptfe blade. Fm approved for use with viscous non-corrosive fluids heavier than 30 sae.

 

Legend Valve 104-706NL T-408 No Lead Brass Gate Valve 1-14

Legend Valve 104-706NL T-408 No Lead Brass Gate Valve, 1-1/4″

Legend Valve 104-706NL T-408 No Lead Brass Gate Valve, 1-1/4″ - Body and bonnet are connected with a tight metal to metal leak-proof seat. Legend models t-408/s-408 gate valves are constructed of heavy duty cast brass. Recommended for non-steam use in residential applications. The t-408/s-408 is legend’s newest entry into the competitive gate valve market. They have a screwed bonnet, non-rising stem, solid wedge disc, and integral seats.

 

2 Brass Gate Valve - 200WOG FxF NPT

2″ Brass Gate Valve – 200WOG, FxF NPT

2″ Brass Gate Valve – 200WOG, FxF NPT - Suitable for full range of liquids and gas. Pressure rated 200wog & 125wsp. Female x female npt, 174, ips. Threaded ends to ansi b1201. Brass forged body.

 

1-14 Brass Gate Valve - 200WOG FxF NPT

1-1/4″ Brass Gate Valve – 200WOG, FxF NPT

1-1/4″ Brass Gate Valve – 200WOG, FxF NPT - Female x female npt, 102, ips. Suitable for full range of liquids and gas. Pressure rated 200wog & 125wsp. Threaded ends to ansi b1201. Brass forged body.

 

Matco-Norca 514T04 Brass Gate Valve Full Port 34 NPT

Matco-Norca 514T04 Brass Gate Valve, Full Port, 3/4″ NPT

Matco-Norca 514T04 Brass Gate Valve, Full Port, 3/4″ NPT - Full port cast brass 200 wog, 125 swp. Iapmo approved. Threaded ends conform to ansi standards b21. Non-rising stem threaded bonnet. Valves are tested in accordance w/ mss-sp-82.

 

Smith-Cooper International 8103 Series Brass Gate Valve Non-Rising Stem Inline 12 NPT Female Non-Potable Water Use Only

Smith-Cooper International 8103 Series Brass Gate Valve, Non-Rising Stem, Inline, 1/2″ NPT Female, Non-Potable Water Use Only

Smith-Cooper International 8103 Series Brass Gate Valve, Non-Rising Stem, Inline, 1/2″ NPT Female, Non-Potable Water Use Only - Made from brass for higher corrosion resistance than steel. Female national pipe taper (npt) threads for connecting to male threaded pipes. Top-mounted hand wheel for lowering and lifting the gate. 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog). Product contains brass which does not meet federal and state requirements for drinking water. Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use.

 

1 Brass Gate Valve - 200WOG FxF NPT

1″ Brass Gate Valve – 200WOG, FxF NPT

1″ Brass Gate Valve – 200WOG, FxF NPT - Female x female npt, 075, ips. Suitable for full range of liquids and gas. Brass forged body. Pressure rated 200wog & 125wsp. Threaded ends to ansi b1201.

 

Legend Valve 104-303 12 T-401 Brass Gate Valve

Legend Valve 104-303 1/2″ T-401 Brass Gate Valve

Legend Valve 104-303 1/2″ T-401 Brass Gate Valve - Recommended for nonsteam use in residential and commercial applications. Non-rising stem, solid wedge disc, and integral seats. Body and bonnet are connected with a tight metal to metal leakproof seat. Pipe size 1/2″ threaded. Gate valves are constructed of heavy duty cast brass.

 

American Valve G300 1 Lead-Free Brass Gate Valve IPS 1-Inch

American Valve G300 1″ Lead-Free Brass Gate Valve IPS, 1-Inch

American Valve G300 1″ Lead-Free Brass Gate Valve IPS, 1-Inch - It features a solid wedge disc and adjustable packing nut. The american valve g300 is a lead-free gate valve with female ips threaded ends.

 

Legend Valve 104-468NL T-400 No Lead Brass Gate Valve 2

Legend Valve 104-468NL T-400 No Lead Brass Gate Valve, 2″

Legend Valve 104-468NL T-400 No Lead Brass Gate Valve, 2″ - Recommended for non-steam use in residential and commercial applications. Legend models t-400/s-400 gate valves are constructed of cast brass. Body and bonnet are connected with a tight metal to metal leak-proof seat. They are an excellent competitive alternative where port size is not critical. They have a screwed bonnet, non-rising stem, solid wedge disc and integral seats.

 

12 Brass Gate Valve - 200WOG FxF NPT

1/2″ Brass Gate Valve – 200WOG, FxF NPT

1/2″ Brass Gate Valve – 200WOG, FxF NPT - Threaded ends to ansi b1201. Brass forged body. Female x female npt, 051, ips. Pressure rated 200wog & 125wsp. Suitable for full range of liquids and gas.

 

Smith-Cooper International 8130 Series Brass Gate Valve Non-Rising Stem Inline 34 Compression Non-Potable Water Use Only

Smith-Cooper International 8130 Series Brass Gate Valve, Non-Rising Stem, Inline, 3/4″ Compression, Non-Potable Water Use Only

Smith-Cooper International 8130 Series Brass Gate Valve, Non-Rising Stem, Inline, 3/4″ Compression, Non-Potable Water Use Only - Made from brass for higher corrosion resistance than steel. Compression ends for fast installation. Product contains brass which does not meet federal and state requirements for drinking water. 200 pounds per square inch (gauge) (psig) for water, oil, and gas (wog). Top-mounted hand wheel for lowering and lifting the gate. Non-rising stem stays fixed in place when gate is raised or lowered for low clearance use.

 

1-12 Brass Gate Valve - 200WOG FxF NPT

1-1/2″ Brass Gate Valve – 200WOG, FxF NPT

1-1/2″ Brass Gate Valve – 200WOG, FxF NPT - 20. 1applicable media steam, water, oil and gas working temp 0 to 300 degree f. Applicable media steam, water, oil and gas working temp 0 to 300 degree f brass forged body female x female npt, ips pressure rated 200wog & 125wsp non rising stem cast iron handle suitable for full range of liquids and gas flow can go both directions each valve individually tested threaded ends to ansi b1.

 

Legend Valve 104-475NL S-400 No Lead Brass Gate Valve 1

Legend Valve 104-475NL S-400 No Lead Brass Gate Valve, 1″

Legend Valve 104-475NL S-400 No Lead Brass Gate Valve, 1″ - Body and bonnet are connected with a tight metal to metal leak-proof seat. Legend models t-400/s-400 gate valves are constructed of cast brass. They have a screwed bonnet, non-rising stem, solid wedge disc and integral seats. They are an excellent competitive alternative where port size is not critical. Recommended for non-steam use in residential and commercial applications.

 

IrrigationKing RKGV4 4 Brass Gate Valve Full Bore

IrrigationKing RKGV4 4″ Brass Gate Valve Full Bore

IrrigationKing RKGV4 4″ Brass Gate Valve Full Bore - Irrigationking 4 inch brass gate valve full bore. Inlet/outlet 4 inch female npt threads.   not to be used for potable water.

 

Legend Valve 104-474NL S-400 No Lead Brass Gate Valve 34

Legend Valve 104-474NL S-400 No Lead Brass Gate Valve, 3/4″

Legend Valve 104-474NL S-400 No Lead Brass Gate Valve, 3/4″ - Body and bonnet are connected with a tight metal to metal leak-proof seat. Recommended for non-steam use in residential and commercial applications. Legend models t-400/s-400 gate valves are constructed of cast brass. They have a screwed bonnet, non-rising stem, solid wedge disc and integral seats. They are an excellent competitive alternative where port size is not critical.

 

Everflow Supplies 205P034-NL C X C Brass Gate Valve 34 Inch-Lead Free

Everflow Supplies 205P034-NL C X C Brass Gate Valve 3/4 Inch-Lead Free

Everflow Supplies 205P034-NL C X C Brass Gate Valve 3/4 Inch-Lead Free - Working pressure 150 wog, 125 psi. No lead design is suitable for all potable water supply installations. Use to prevent the flow of liquid in your plumbing system. Approved by upc, nsf. Brass body constructed.

 

IrrigationKing RKGV3 3 Brass Gate Valve Full Bore

IrrigationKing RKGV3 3″ Brass Gate Valve Full Bore

IrrigationKing RKGV3 3″ Brass Gate Valve Full Bore -   Not to be used for potable water. Irrigationking 3 inch brass gate valve full bore. Inlet/outlet 3 inch female npt threads.