Best Antibody Labeling out of top 25

 

92286 - Biotin Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92286 – Biotin Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92286 – Biotin Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - One labeling reaction per kit. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. See the product protocol under the datasheets tab for more information. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. “. See the cfâ” dye reference table under the datasheets tab for more information. Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. Alexafluor is a registered trademark of molecular probes, inc.

 

92277 - Cfâ633 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92277 – Cfâ”633 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92277 – Cfâ”633 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. One labeling reaction per kit. Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. See the product protocol under the datasheets tab for more information. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Alexafluor is a registered trademark of molecular probes, inc. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. “. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. See the cfâ” dye reference table under the datasheets tab for more information.

 

92255 - Cfâ568 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92255 – Cfâ”568 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92255 – Cfâ”568 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Cfâ” dye technologies are covered by pending us and international patents. See the cfâ” dye reference table under the datasheets tab for more information. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). One labeling reaction per kit. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. “. Alexafluor is a registered trademark of molecular probes, inc. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. See the product protocol under the datasheets tab for more information.

 

92280 - Cfâ660C Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92280 – Cfâ”660C Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92280 – Cfâ”660C Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - “. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Cfâ” dye technologies are covered by pending us and international patents. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. One labeling reaction per kit. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Alexafluor is a registered trademark of molecular probes, inc. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. See the product protocol under the datasheets tab for more information. See the cfâ” dye reference table under the datasheets tab for more information. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling).

 

92266 - Biotin Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92266 – Biotin Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92266 – Biotin Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - “. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Alexafluor is a registered trademark of molecular probes, inc. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. See the cfâ” dye reference table under the datasheets tab for more information. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. See the product protocol under the datasheets tab for more information. One labeling reaction per kit. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling).

 

92257 - Cfâ633 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92257 – Cfâ”633 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92257 – Cfâ”633 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Alexafluor is a registered trademark of molecular probes, inc. Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). One labeling reaction per kit. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. “. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. See the product protocol under the datasheets tab for more information. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. ” mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. See the cfâ” dye reference table under the datasheets tab for more information.

 

92231 - Cfâ405S Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92231 – Cfâ”405S Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92231 – Cfâ”405S Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. See the product protocol under the datasheets tab for more information. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. Cfâ” dye technologies are covered by pending us and international patents. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. See the cfâ” dye reference table under the datasheets tab for more information. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. One labeling reaction per kit. “. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Alexafluor is a registered trademark of molecular probes, inc.

 

92239 - Cfâ660C Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92239 – Cfâ”660C Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92239 – Cfâ”660C Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - One labeling reaction per kit. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. See the cfâ” dye reference table under the datasheets tab for more information. Alexafluor is a registered trademark of molecular probes, inc. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. See the product protocol under the datasheets tab for more information. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. “. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Cfâ” dye technologies are covered by pending us and international patents.

 

92259 - Cfâ647 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92259 – Cfâ”647 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92259 – Cfâ”647 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Alexafluor is a registered trademark of molecular probes, inc. See the product protocol under the datasheets tab for more information. One labeling reaction per kit. Cfâ” dye technologies are covered by pending us and international patents. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. See the cfâ” dye reference table under the datasheets tab for more information. “. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol.

 

92263 - Cfâ680R Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92263 – Cfâ”680R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92263 – Cfâ”680R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. “. Cfâ” dye technologies are covered by pending us and international patents. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Alexafluor is a registered trademark of molecular probes, inc. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. See the product protocol under the datasheets tab for more information. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. One labeling reaction per kit. See the cfâ” dye reference table under the datasheets tab for more information.

 

92238 - Cfâ647 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92238 – Cfâ”647 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92238 – Cfâ”647 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. One labeling reaction per kit. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. See the cfâ” dye reference table under the datasheets tab for more information. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. See the product protocol under the datasheets tab for more information. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Cfâ” dye technologies are covered by pending us and international patents. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Alexafluor is a registered trademark of molecular probes, inc. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. “. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol.

 

92240 - Cfâ680 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92240 – Cfâ”680 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92240 – Cfâ”680 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. See the cfâ” dye reference table under the datasheets tab for more information. “. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Cfâ” dye technologies are covered by pending us and international patents. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. See the product protocol under the datasheets tab for more information. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Alexafluor is a registered trademark of molecular probes, inc. One labeling reaction per kit.

 

92242 - Cfâ770 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92242 – Cfâ”770 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92242 – Cfâ”770 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Alexafluor is a registered trademark of molecular probes, inc. One labeling reaction per kit. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Cfâ” dye technologies are covered by pending us and international patents. See the product protocol under the datasheets tab for more information. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. “. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). See the cfâ” dye reference table under the datasheets tab for more information.

 

92272 - Cfâ405M Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92272 – Cfâ”405M Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92272 – Cfâ”405M Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Alexafluor is a registered trademark of molecular probes, inc. See the product protocol under the datasheets tab for more information. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Cfâ” dye technologies are covered by pending us and international patents. “. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. One labeling reaction per kit. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. See the cfâ” dye reference table under the datasheets tab for more information. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results.

 

92261 - Cfâ660R Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92261 – Cfâ”660R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92261 – Cfâ”660R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. See the cfâ” dye reference table under the datasheets tab for more information. One labeling reaction per kit. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Cfâ” dye technologies are covered by pending us and international patents. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Alexafluor is a registered trademark of molecular probes, inc. See the product protocol under the datasheets tab for more information. “. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step.

 

92260 - Cfâ660C Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92260 – Cfâ”660C Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92260 – Cfâ”660C Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. “. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. See the product protocol under the datasheets tab for more information. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. See the cfâ” dye reference table under the datasheets tab for more information. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Alexafluor is a registered trademark of molecular probes, inc. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. Cfâ” dye technologies are covered by pending us and international patents. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. One labeling reaction per kit.

 

92243 - Cfâ660R Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92243 – Cfâ”660R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92243 – Cfâ”660R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. “. One labeling reaction per kit. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. See the product protocol under the datasheets tab for more information. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Alexafluor is a registered trademark of molecular probes, inc. See the cfâ” dye reference table under the datasheets tab for more information. Cfâ” dye technologies are covered by pending us and international patents. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol.

 

92275 - Cfâ568 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92275 – Cfâ”568 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92275 – Cfâ”568 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. One labeling reaction per kit. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Alexafluor is a registered trademark of molecular probes, inc. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. See the cfâ” dye reference table under the datasheets tab for more information. Cfâ” dye technologies are covered by pending us and international patents. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. See the product protocol under the datasheets tab for more information. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. “.

 

BioVision EZLabel Antibody Biotin Labeling Kit K834-5 #ad

BioVision EZLabel Antibody Biotin Labeling Kit, K834-5

BioVision EZLabel Antibody Biotin Labeling Kit, K834-5 #ad - Easy to use kit to label upto 5mg of ab wz biotin for multiple applications such as elisa, wblot. The kit provides all of the reagents necessary to perform five labeling reactions using up to 1 mg of antibody per reaction. The biotin-labeled antibody can be directly used for multiple downstream applications including elisa, western blot, immunohistochemistry, immunoassays, etc. -Fast and efficient labeling of antibodies with biotin -easy to use kit to label upto 5 mg of antibody with biotin formultiple applications such as elisa, western blot, immunohistochemistry, immunofluorescence and facs analysis biovisionâs ezlabelâ” antibody-biotin labeling kit provides an easy way to label antibodies with biotin in a user-friendly spin column format. Due to its high affinity for tetrameric avidin proteins, biotin is ideal for labeling antibodies. -All necessary reagents included. Each pair of spin columns provided in the kit can be used to purify up to 1 mg of the labeled target antibody.

 

92253 - Cfâ488A Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92253 – Cfâ”488A Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92253 – Cfâ”488A Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. “. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Alexafluor is a registered trademark of molecular probes, inc. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. See the product protocol under the datasheets tab for more information. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. See the cfâ” dye reference table under the datasheets tab for more information. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. One labeling reaction per kit. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling).

 

92234 - Cfâ555 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92234 – Cfâ”555 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92234 – Cfâ”555 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - See the product protocol under the datasheets tab for more information. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. “. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. See the cfâ” dye reference table under the datasheets tab for more information. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. Alexafluor is a registered trademark of molecular probes, inc. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. One labeling reaction per kit. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results.

 

92287 - Cfâ543 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92287 – Cfâ”543 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92287 – Cfâ”543 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. “. Alexafluor is a registered trademark of molecular probes, inc. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. See the cfâ” dye reference table under the datasheets tab for more information. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. See the product protocol under the datasheets tab for more information. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. One labeling reaction per kit. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. Cfâ” dye technologies are covered by pending us and international patents.

 

92265 - Cfâ770 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92265 – Cfâ”770 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92265 – Cfâ”770 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). Cfâ” dye technologies are covered by pending us and international patents. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. “. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. One labeling reaction per kit. See the cfâ” dye reference table under the datasheets tab for more information. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. See the product protocol under the datasheets tab for more information. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Alexafluor is a registered trademark of molecular probes, inc.

 

92245 - Cfâ640R Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92245 – Cfâ”640R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92245 – Cfâ”640R Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. Cfâ” dye technologies are covered by pending us and international patents. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. Alexafluor is a registered trademark of molecular probes, inc. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. “. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling). After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. See the cfâ” dye reference table under the datasheets tab for more information. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. One labeling reaction per kit. See the product protocol under the datasheets tab for more information.

 

92270 - Cfâ350 Mix-n-Stainâ Antibody Labeling Kit - Mix-n-Stain Antibody Labeling Kits Biotium - Each #ad

92270 – Cfâ”350 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each

92270 – Cfâ”350 Mix-n-Stainâ” Antibody Labeling Kit – Mix-n-Stain Antibody Labeling Kits, Biotium – Each #ad - Alexafluor is a registered trademark of molecular probes, inc. An ultrafiltration column provided in the kit can be used to remove tris, glycine, or glycerol if the concentration in your antibody solution exceeds the limits specified in the labeling protocol. Mix-n-stainâ” antibody labeling kits feature biotium’s line of cfâ” dyes, which offer advantages in brighness and/or photostability compared to alexa fluor dyes and other similar commercial dyes. Simply mix your antibody with the buffer and premeasured aliquot of cfâ” dye provided in the kit, a step that takes less than 30 seconds of hands-on time. Mix-n-stainâ” and cfâ” are trademarks of biotium, inc. A large selection of cfâ” dye colors spanning the visible and near-infrared spectra offers flexibility for labeling primary antibodies with dye colors that are optimal for your instrument detection settings for multi-color detection. There is no need to calculate how much dye you should use -just select the approptriate kit size based on the ug amount of antibody you wish to label for optimal results. See the cfâ” dye reference table under the datasheets tab for more information. Cfâ” dye technologies are covered by pending us and international patents. ” Mix-n-stainâ” antibody labeling kits dramatically simplify the process of labeling primary antibodies with fluorescent dyes or biotin. After a 30 minute incubation, your fluorescent antibody conjugate is ready to use, with no purification step. See the product protocol under the datasheets tab for more information. One labeling reaction per kit. Moreover, the labeling reaction can tolerate the presence of common stabilizers such as sodium azide and low levels of tris, glycerol, bsa or gelatin. “. Kits are sized according to amount of antibody to be labeled (50-100 ug, 20-50 ug, or 5-20 ug antibody per labeling).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.