Best Micro End Mill out of top 22

 

Kyocera Micro End Mills Series 105 1 Flute 00900mm

Kyocera Micro End Mills Series 105 1 Flute (0.0900mm)

Kyocera Micro End Mills Series 105 1 Flute (0.0900mm) - Any listing violations or intellectual property infringement will be reported to amazon. We are proud to be named as a forbes global 2000 company. We have state-of-the-art manufacturing facilities in california, north carolina, and ohio. Please contact us for more information. Purchase manufacturer direct and receive unparalleled customer service and technical support. Item type 1 flute stub length ball nose end mill series series 1501 reach length n/a radius n/a flutes 1 flute end style ball nose point angle n/a primary applications steel ~30hrc, steel 30~40hrc, hardened steel ~55hrc additional applications hardened steel ~68hrc, stainless steel, cast iron, nickel & cobalt, titanium alloy kyocera precision tools, inc. In addition, we also offer resharpening services and custom tooling solutions. Our representatives are located in the us, and we ship directly from our north american warehouses. Notice to sellers this is an authentic kyocera product, and this listing is brand registered. Please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Is a usa-based manufacturer of tight tolerance carbide cutting tools for a broad range of markets including automotive, industrial, medical, aerospace, electronics, printed circuit boards, and more. We specialize in solid round cutting tools, indexable cutting tools, and pcb cutting tools for a wide variety of applications.

 

Kodiak Cutting Tools KCT143768 USA Made Solid Carbide Micro End Mill 0005 Diameter 0125 Shank 0015 Length of Cut 1-12 Overall Length 2 Flute

Kodiak Cutting Tools KCT143768 USA Made Solid Carbide Micro End Mill, 0.005″ Diameter, 0.125″ Shank, 0.015″ Length of Cut, 1-1/2″ Overall Length, 2 Flute

Kodiak Cutting Tools KCT143768 USA Made Solid Carbide Micro End Mill, 0.005″ Diameter, 0.125″ Shank, 0.015″ Length of Cut, 1-1/2″ Overall Length, 2 Flute - 015″ length of cut 1-1/2″ overall length 2 flute carbide, micro. 005 inch diameter solid carbide end mill, micro 0. 125″ shank 0.

 

American Carbide 145110 0019 2 Flute Ball Nose Micro End Mill Uncoated

American Carbide 145110 0.019 2 Flute Ball Nose Micro End Mill Uncoated

American Carbide 145110 0.019 2 Flute Ball Nose Micro End Mill Uncoated - 0057″ length of cut. 0019″ cutter diameter. 0125″ shank diameter. 2 flute. 1-1/2″ overall length.

 

Kodiak Cutting Tools KODIAK133769 USA Made Solid Carbide Micro End Mill 4 Flute 3 mm Shank 63 mm Length of Cut 38 mm Overall Length 2 mm Diameter

Kodiak Cutting Tools KODIAK133769 USA Made Solid Carbide Micro End Mill, 4 Flute, 3 mm Shank, 6.3 mm Length of Cut, 38 mm Overall Length, 2 mm Diameter

Kodiak Cutting Tools KODIAK133769 USA Made Solid Carbide Micro End Mill, 4 Flute, 3 mm Shank, 6.3 mm Length of Cut, 38 mm Overall Length, 2 mm Diameter - 3mm length of cut 38mm overall length 4 flute carbide, metric. 2mm diameter solid carbide end mill, micro 3mm shank 6.

 

Kodiak Cutting Tools KODIAK226048 USA Made Micro Solid Carbide End Mill 4 Flutes AlTiN Coated 18 Shank 0300 Length of Cut 1-12 Overall Length 0100 Diameter

Kodiak Cutting Tools KODIAK226048 USA Made Micro Solid Carbide End Mill, 4 Flutes, AlTiN Coated, 1/8″ Shank, 0.300″ Length of Cut, 1-1/2″ Overall Length, 0.100″ Diameter

Kodiak Cutting Tools KODIAK226048 USA Made Micro Solid Carbide End Mill, 4 Flutes, AlTiN Coated, 1/8″ Shank, 0.300″ Length of Cut, 1-1/2″ Overall Length, 0.100″ Diameter - 300″ length of cut 1-1/2″ overall length 4 flute carbide, micro. 125″ shank 0. 100 inch diameter solid carbide end mill, micro 0.

 

Kodiak Cutting Tools KODIAK222385 USA Made Carbide Stub Length Ball Nose End Mill Micro 4 Flute 18 Shank 0093 Diameter

Kodiak Cutting Tools KODIAK222385 USA Made Carbide Stub Length Ball Nose End Mill, Micro, 4 Flute, 1/8″ Shank, 0.093″ Diameter

Kodiak Cutting Tools KODIAK222385 USA Made Carbide Stub Length Ball Nose End Mill, Micro, 4 Flute, 1/8″ Shank, 0.093″ Diameter - 093 inch diameter solid carbide end mill, micro 0. 125″ shank 0. 140″ length of cut 1-1/2″ overall length 4 flute carbide, micro.

 

0032 Micro End Mill 2-flute SE Regular Square end Uncoated

0.032″ Micro End Mill, 2-flute, SE, Regular, Square end, Uncoated

0.032″ Micro End Mill, 2-flute, SE, Regular, Square end, Uncoated - End mills|2 flute|square|regular|miniature|micro. Material carbide, tin coated color silver tone,gold tone. Working range pcb, cnc total length 38mm/15′. Product name micro drill bit package content 4 x micro drill bit, 1 x plastic box. Total weight 29g cutting diameter 27mm/011′.

 

Kyocera 3 Flute Micro End Mill 300MM 3F EM 12MMLOC

Kyocera 3 Flute Micro End Mill (3.00MM 3F EM 12MMLOC)

Kyocera 3 Flute Micro End Mill (3.00MM 3F EM 12MMLOC) - Product features kyocera precision tools, inc. Notice to sellers this is an authentic kyocera product, and this listing is brand registered. Any listing violations or intellectual property infringement will be reported to amazon. Is a usa-based manufacturer of tight tolerance carbide cutting tools for a broad range of markets including automotive, industrial, medical, aerospace, electronics, printed circuit boards, and more. Purchase manufacturer direct and receive unparalleled customer service and technical support. We specialize in solid round cutting tools, indexable cutting tools, and pcb cutting tools for a wide variety of applications. In addition, we also offer re-sharpening services and custom tooling solutions. Please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Please contact us for more information. Our representatives are located in the us, and we ship directly from our north american warehouses. We are proud to be named as a forbes global 2000 company we have state-of-the-art manufacturing facilities in california, north carolina, and ohio.

 

Kodiak Cutting Tools KODIAK134000 USA Made Solid Carbide Micro End Mill 4 Flute 3 mm Shank 95 mm Length of Cut 38 mm Overall Length 25 mm Diameter

Kodiak Cutting Tools KODIAK134000 USA Made Solid Carbide Micro End Mill, 4 Flute, 3 mm Shank, 9.5 mm Length of Cut, 38 mm Overall Length, 2.5 mm Diameter

Kodiak Cutting Tools KODIAK134000 USA Made Solid Carbide Micro End Mill, 4 Flute, 3 mm Shank, 9.5 mm Length of Cut, 38 mm Overall Length, 2.5 mm Diameter - 5 inch diameter solid carbide end mill, micro 3mm shank 9. 2. 5mm length of cut 38mm overall length 4 flute carbide, metric.

 

American Carbide 225773 0075 4 Flute Square End Micro End Mill Altin

American Carbide 225773 0.075 4 Flute Square End Micro End Mill Altin

American Carbide 225773 0.075 4 Flute Square End Micro End Mill Altin - 0225″ length of cut. 0075″ cutter diameter. 4 flute. 1-1/2″ overall length. 0125″ shank diameter.

 

Kodiak Cutting Tools KODIAK222847 USA Made Solid Carbide End Mill Micro 2 Flute 18 Shank 0060 Length of Cut 1-12 Overall Length 0020 Diameter

Kodiak Cutting Tools KODIAK222847 USA Made Solid Carbide End Mill, Micro, 2 Flute, 1/8″ Shank, 0.060″ Length of Cut, 1-1/2″ Overall Length, 0.020″ Diameter

Kodiak Cutting Tools KODIAK222847 USA Made Solid Carbide End Mill, Micro, 2 Flute, 1/8″ Shank, 0.060″ Length of Cut, 1-1/2″ Overall Length, 0.020″ Diameter - 125″ shank 0. 020 inch diameter solid carbide end mill, micro 0. 060″ length of cut 1-1/2″ overall length 2 flute carbide, micro.

 

Melin Tool AMG Carbide Micro Square Nose End Mill AlTiN Monolayer Finish 30 Deg Helix 2 Flutes 15000 Overall Length 00240 Cutting Diameter 0125 Shank Diameter

Melin Tool AMG Carbide Micro Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 1.5000″ Overall Length, 0.0240″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG Carbide Micro Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 2 Flutes, 1.5000″ Overall Length, 0.0240″ Cutting Diameter, 0.125″ Shank Diameter - Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Square nose end. Round shanks allow use with a wide variety of toolholding systems. 30 degree helix angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Kodiak Cutting Tools KODIAK133989 USA Made Solid Carbide Micro End Mill 4 Flute 3 mm Shank 63 mm Length of Cut 38 mm Overall Length 2 mm Diameter

Kodiak Cutting Tools KODIAK133989 USA Made Solid Carbide Micro End Mill, 4 Flute, 3 mm Shank, 6.3 mm Length of Cut, 38 mm Overall Length, 2 mm Diameter

Kodiak Cutting Tools KODIAK133989 USA Made Solid Carbide Micro End Mill, 4 Flute, 3 mm Shank, 6.3 mm Length of Cut, 38 mm Overall Length, 2 mm Diameter - 3mm length of cut 38mm overall length 4 flute carbide, metric. 2mm diameter solid carbide end mill, micro 3mm shank 6.

 

Kodiak Cutting Tools KCT225201 USA Made Solid Micro Carbide End Mill 4 Flute 0023 Diameter 18 Shank 0069 Length of Cut 1-12 Overall Length

Kodiak Cutting Tools KCT225201 USA Made Solid Micro Carbide End Mill, 4 Flute, 0.023″ Diameter, 1/8″ Shank, 0.069″ Length of Cut, 1-1/2″ Overall Length

Kodiak Cutting Tools KCT225201 USA Made Solid Micro Carbide End Mill, 4 Flute, 0.023″ Diameter, 1/8″ Shank, 0.069″ Length of Cut, 1-1/2″ Overall Length - 023 inch diameter solid carbide end mill, micro 0. 069″ length of cut 1-1/2″ overall length 4 flute carbide, micro. 125″ shank 0.

 

American Carbide 144648 0085 2 Flute Square End Micro End Mill Uncoated

American Carbide 144648 0.085 2 Flute Square End Micro End Mill Uncoated

American Carbide 144648 0.085 2 Flute Square End Micro End Mill Uncoated - 0085″ cutter diameter. 1-1/2″ overall length. 2 flute. 0255″ length of cut. 0125″ shank diameter.

 

American Carbide 147904 0067 4 Flute Ball Nose Micro End Mill Uncoated

American Carbide 147904 0.067 4 Flute Ball Nose Micro End Mill Uncoated

American Carbide 147904 0.067 4 Flute Ball Nose Micro End Mill Uncoated - 4 flute. 0201″ length of cut. 0067″ cutter diameter. 1-1/2″ overall length. 0125″ shank diameter.

 

Kyocera Ball Nose Micro End Mill 3MM 2FL BNEM 10MMRCH

Kyocera Ball Nose Micro End Mill (3MM 2FL BNEM 10MMRCH)

Kyocera Ball Nose Micro End Mill (3MM 2FL BNEM 10MMRCH) - Any listing violations or intellectual property infringement will be reported to amazon. Please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. Product features kyocera precision tools, inc. We are proud to be named as a forbes global 2000 company we have state-of-the-art manufacturing facilities in california, north carolina, and ohio. In addition, we also offer re-sharpening services and custom tooling solutions. Is a usa-based manufacturer of tight tolerance carbide cutting tools for a broad range of markets including automotive, industrial, medical, aerospace, electronics, printed circuit boards, and more. Our representatives are located in the us, and we ship directly from our north american warehouses. Notice to sellers this is an authentic kyocera product, and this listing is brand registered. Purchase manufacturer direct and receive unparalleled customer service and technical support. We specialize in solid round cutting tools, indexable cutting tools, and pcb cutting tools for a wide variety of applications. Please contact us for more information.

 

Kyocera 3 Flute Micro End Mill 316 3F EM 5LOC

Kyocera 3 Flute Micro End Mill (3/16″ 3F EM .5″LOC)

Kyocera 3 Flute Micro End Mill (3/16″ 3F EM .5″LOC) - In addition, we also offer re-sharpening services and custom tooling solutions. Any listing violations or intellectual property infringement will be reported to amazon. Our representatives are located in the us, and we ship directly from our north american warehouses. Is a usa-based manufacturer of tight tolerance carbide cutting tools for a broad range of markets including automotive, industrial, medical, aerospace, electronics, printed circuit boards, and more. Please do not list your item against this asin if you are not selling an authentic kyocera product of the same part number. We are proud to be named as a forbes global 2000 company we have state-of-the-art manufacturing facilities in california, north carolina, and ohio. Notice to sellers this is an authentic kyocera product, and this listing is brand registered. We specialize in solid round cutting tools, indexable cutting tools, and pcb cutting tools for a wide variety of applications. Product features kyocera precision tools, inc. Please contact us for more information. Purchase manufacturer direct and receive unparalleled customer service and technical support.

 

American Carbide 225366 0038 4 Flute Square End Micro End Mill Altin

American Carbide 225366 0.038 4 Flute Square End Micro End Mill Altin

American Carbide 225366 0.038 4 Flute Square End Micro End Mill Altin - 4 flute. 1-1/2″ overall length. 0114″ length of cut. 0125″ shank diameter. 0038″ cutter diameter.

 

American Carbide 147728 0051 4 Flute Ball Nose Micro End Mill Uncoated

American Carbide 147728 0.051 4 Flute Ball Nose Micro End Mill Uncoated

American Carbide 147728 0.051 4 Flute Ball Nose Micro End Mill Uncoated - 0125″ shank diameter. 1-1/2″ overall length. 0051″ cutter diameter. 4 flute. 0153″ length of cut.

 

American Carbide 146969 0085 4 Flute Square End Micro End Mill Uncoated

American Carbide 146969 0.085 4 Flute Square End Micro End Mill Uncoated

American Carbide 146969 0.085 4 Flute Square End Micro End Mill Uncoated - 0085″ cutter diameter. 4 flute. 0125″ shank diameter. 1-1/2″ overall length. 0255″ length of cut.

 

WIDIA Hanita 465102000CT NINA 4651 Micro End Mill Ball Nose 2 mm Cutting Dia Carbide TiCN Coating RH Cut Straight Shank 3 mm Shank Dia 2Fl

WIDIA Hanita 465102000CT NINA 4651 Micro End Mill, Ball Nose, 2 mm Cutting Dia, Carbide, TiCN Coating, RH Cut, Straight Shank, 3 mm Shank Dia, 2Fl

WIDIA Hanita 465102000CT NINA 4651 Micro End Mill, Ball Nose, 2 mm Cutting Dia, Carbide, TiCN Coating, RH Cut, Straight Shank, 3 mm Shank Dia, 2Fl - Micro solid carbide end mills offer plunging, slotting, profiling, and 3d milling for a wide range of materials and applications. Micro square and ball nose tools, designed for the most demanding end users, offer exceptional tool life and precision at high speeds and feeds. They are designed to provide efficient machining in a wide range of steel, cast iron, copper and copper alloys, and aluminum materials.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.