Coolest 13 Carbide Points

 

Royal Products 11525 3 MT Dead Center With Oversized Carbide Point

Royal Products 11525 3 MT Dead Center With Oversized Carbide Point

Royal Products 11525 3 MT Dead Center With Oversized Carbide Point - Ground to an angle of 60 degrees and guaranteed to +/-000005″ tir. The large carbide tip is brazed into a close-tolerance socket for maximum strength and rigidity. Oversized carbide point covers a wider range of center holes and provides great wear resistance. Excellent for grinding and high precision turning applications. 1 year warranty against failure due to manufacturing defects.

 

48- Green Silicon Carbide Point by Foredom

48- Green Silicon Carbide Point by Foredom

48- Green Silicon Carbide Point by Foredom - 150 grit, 1/4″ head dia. Made in usa. Foredom green silicon carbide point-48 is used on low-tensile, brittle or “smeary” type materials such as aluminum or brass, stainless steel, glass, gemstones and other non-metals. X 9/32″ head length, 3/32″ shank. Speed 35,000 rpm. Used for a broad range of work including grinding, deburring, smoothing, cleaning and rough finishing work. Max.

 

Royal Products 11526 4 MT Dead Center With Oversized Carbide Point

Royal Products 11526 4 MT Dead Center With Oversized Carbide Point

Royal Products 11526 4 MT Dead Center With Oversized Carbide Point - The large carbide tip is brazed into a close-tolerance socket for maximum strength and rigidity. Oversized carbide point covers a wider range of center holes and provides great wear resistance. 1 year warranty against failure due to manufacturing defects. Ground to an angle of 60 degrees and guaranteed to +/-000005″ tir. Excellent for grinding and high precision turning applications.

 

Royal Products 11527 2 MT Dead Center With Oversized Carbide Point

Royal Products 11527 2 MT Dead Center With Oversized Carbide Point

Royal Products 11527 2 MT Dead Center With Oversized Carbide Point - 1 year warranty against failure due to manufacturing defects. The large carbide tip is brazed into a close-tolerance socket for maximum strength and rigidity. Oversized carbide point covers a wider range of center holes and provides great wear resistance. Excellent for grinding and high precision turning applications. Ground to an angle of 60 degrees and guaranteed to +/-000005″ tir.

 

INTERAPID Carbide Point for dial test indicator - Model T-481

INTERAPID Carbide Point for dial test indicator – Model: T-481

INTERAPID Carbide Point for dial test indicator – Model: T-481 - One piece, solid case. Jeweled mechanism fitted with ball bearings. Very high sensitivity, very light measuring pressure. Variety of mounting positions.

 

DREMEL 9924 - Carbide Point for 290

DREMEL 9924 – Carbide Point (for 290)

DREMEL 9924 – Carbide Point (for 290) - Scriber. Sold on amazon. Interchangeable handle for quick assembly and disassembly of products. Carbide points.

 

SINGLE END SPIKE WCARBIDE POINT

SINGLE END SPIKE W/CARBIDE POINT

SINGLE END SPIKE W/CARBIDE POINT - Please read full description carefully before ordering. Dial diameter 1-1/2″, jewelled movement, revolution counter, stem mount and dovetail mount. Range 0060″, dial reading 0-15-0, 00005″ graduation. Automatic reversal, 210° swivel arc, includes 3 tungsten carbide points,. Please read descriptions carefully before ordering.

 

CRL Dremel Carbide Point For 2113083 Engraver Tool - 2113084

CRL Dremel® Carbide Point For 2113083 Engraver Tool – 2113084

CRL Dremel® Carbide Point For 2113083 Engraver Tool – 2113084 - Engraving depth from a fine line to deep grooves. The crl dremel® carbide point is a replacement point for the 2113083 tool. It permanently engraves tools, equipment, glass, stone, plastic, ceramic, metal, and leather.

 

Amana Tool 56125 Solid Carbide Point Cutting Roundover 18 R x 14 D x 516 CH x 14 SHK x 2 Inch Long Router Bit for Beadboards

Amana Tool 56125 Solid Carbide Point Cutting Roundover 1/8 R x 1/4 D x 5/16 CH x 1/4 SHK x 2 Inch Long Router Bit for Beadboards

Amana Tool 56125 Solid Carbide Point Cutting Roundover 1/8 R x 1/4 D x 5/16 CH x 1/4 SHK x 2 Inch Long Router Bit for Beadboards - Specifications diameter (d) 1/4 radius (r) 1/8 cutting height (b) 5/16 shank (d) 1/4 overall length (l) 2 b1 1/8 type solid carbide flutes 2. Industrial quality signmaking, lettering, v groove miter fold & mini router bits are made by amana tool, the leading manufacturers of high-quality wood-cutting tools. Use amana tool 56125 solid carbide point cutting roundover 1/8 r x 1/4 d x 5/16 ch x 1/4 shk x 2 inch long router bit for lettering, engraving, signmaking, fluting and decorative trimming such as beadboards.

 

Mitutoyo 985-101 Scriber 675 Length wCarbide Point

Mitutoyo 985-101, Scriber 6.75″ Length, w/Carbide Point

Mitutoyo 985-101, Scriber 6.75″ Length, w/Carbide Point - Point micrometer measures 0 to 10″ (0 to 254mm) with 000005″ (0001mm) resolution and + or, 00001″ accuracy, for measuring web thickness of drills, small grooves, keyways, and other hard-to-reach areas. Points are 15 degrees and carbide-tipped for durability. Replacement point no 050561. Satin chrome finish on sleeve and thimble for corrosion-resistance and visibility, hammertone baked-enamel finish on frame for durability, and ratchet stop for precise, repeatable measurements. Lcd screen displays in inches and metric units.

 

Starrett 70AX Pocket Scriber with 2-38-Inch Tungsten Carbide Point

Starrett 70AX Pocket Scriber with 2-3/8-Inch Tungsten Carbide Point

Starrett 70AX Pocket Scriber with 2-3/8-Inch Tungsten Carbide Point - The hexagon-shaped head prevents rolling. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The handle is of steel, knurled, and nickel plated. The scriber point is steel, properly hardened and finely tapered so that the location of the point is not obscured.

 

DURATOOL SB0805 SCRIBER WITH FIXED CARBIDE POINT

DURATOOL SB0805 SCRIBER WITH FIXED CARBIDE POINT

DURATOOL SB0805 SCRIBER WITH FIXED CARBIDE POINT - Range 0060″, dial reading 0-15-0, 00005″ graduation. Twice the range of most test indicators. Please read full description carefully before ordering. Dial diameter 1-1/2″, jewelled movement, revolution counter, stem mount and dovetail mount. Automatic reversal, 210° swivel arc, includes 3 tungsten carbide points,.

 

FACOM DELA158900 CARBIDE POINT TO DRAW 10 pieces

FACOM DELA.1589.00 CARBIDE POINT TO DRAW (10 pieces)

FACOM DELA.1589.00 CARBIDE POINT TO DRAW (10 pieces) - Good machining quality,high degree of finish,can work out the high accuracy of various shapes mold cavity. Please read the description carefully before ordering. Fowler carbide point for punch 52-515-047-0. Price for pack of 10order unit each 1 overall length 150 svhc no svhc (17-dec-2014) scriber / probe type single ended scriber. For the most work it can be replaced with small grinding wheel,and no dust pollution.