Coolest 24 Chisel Handles

 

Kirschen 3147010 Carving chisel with handle Cut 11 straight 10mm

Kirschen 3147010 Carving chisel with handle Cut 11 straight 1,0mm

Kirschen 3147010 Carving chisel with handle Cut 11 straight 1,0mm - O. Cannot be avoided due to hand-forging. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. Small differences in sizes, shapes a. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. Carving chisel, grooving gouge, with octagonal hornbeam handle. S. 60 mm. The widths are from 2 to max. The professional carving tools are used to carve sculptures and also reliefs. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°.

 

Stubai 545414 Violin maker chisel with handle Type 4 14mm

Stubai 545414 Violin maker chisel with handle Type 4 14mm

Stubai 545414 Violin maker chisel with handle Type 4 14mm - Today, stubai as a brand is present in over 60 countries. Mbh is proud to carry the national coat of arms. From the stubai tool industry two subsidiaries emerged stubai kshb gmbh, production, stubai zmv gmbh, agency for marketing and sales. H. The stubai valley has for centuries been a good ground for the metal processing. Responsibly we bear this seal on many export markets and thus do not only represent our company but also our home. Gen. Not without reason, the stubai tool industry reg. Since 1960, the cooperative network guarantees to forging under the name “stubai tool industry” for quality. The cooperative, as a strong roof, maintains the brand name, is responsible for marketing, sales and logistics. B. Mother of companies operating under the brand stubai is the stubai tool industry reg. M. Each of these companies is a specialist in a specific product category. 24 companies belong to this association. Environmental awareness is a major concern of our traditional cooperative. Gen.

 

Kirschen 3177010 Fish Tail Chisel with handle Cut 7 straight 10mm

Kirschen 3177010 Fish Tail Chisel with handle Cut 7 straight 10mm

Kirschen 3177010 Fish Tail Chisel with handle Cut 7 straight 10mm - The widths are from 2 to max. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. O. Cannot be avoided due to hand-forging. Spade gouge with octagonal hornbeam handle. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The professional carving tools are used to carve sculptures and also reliefs. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. Small differences in sizes, shapes a. 60 mm. S.

 

Kirschen 3177004 Fish Tail Chisel with handle Cut 7 straight 4mm

Kirschen 3177004 Fish Tail Chisel with handle Cut 7 straight 4mm

Kirschen 3177004 Fish Tail Chisel with handle Cut 7 straight 4mm - The widths are from 2 to max. Cannot be avoided due to hand-forging. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. O. 60 mm. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. Spade gouge with octagonal hornbeam handle. Small differences in sizes, shapes a. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. S. The professional carving tools are used to carve sculptures and also reliefs.

 

Kirschen 3177002 Fish Tail Chisel with handle Cut 7 straight 2mm

Kirschen 3177002 Fish Tail Chisel with handle Cut 7 straight 2mm

Kirschen 3177002 Fish Tail Chisel with handle Cut 7 straight 2mm - The professional carving tools are used to carve sculptures and also reliefs. Cannot be avoided due to hand-forging. Small differences in sizes, shapes a. S. Spade gouge with octagonal hornbeam handle. The widths are from 2 to max. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. O. 60 mm. This angle may need to be adapted on whether the tools are to be used in hard or soft wood.

 

Kirschen 3171016 Fish Tail Chisel with handle Cut 1 straight 16mm

Kirschen 3171016 Fish Tail Chisel with handle Cut 1 straight 16mm

Kirschen 3171016 Fish Tail Chisel with handle Cut 1 straight 16mm - Small differences in sizes, shapes a. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. O. S. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. Cannot be avoided due to hand-forging. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The professional carving tools are used to carve sculptures and also reliefs. Spade gouge with octagonal hornbeam handle. The widths are from 2 to max. 60 mm.

 

Kirschen 3171014 Fish Tail Chisel with handle Cut 1 straight 14mm

Kirschen 3171014 Fish Tail Chisel with handle Cut 1 straight 14mm

Kirschen 3171014 Fish Tail Chisel with handle Cut 1 straight 14mm - The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The widths are from 2 to max. Cannot be avoided due to hand-forging. S. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. Small differences in sizes, shapes a. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. 60 mm. The professional carving tools are used to carve sculptures and also reliefs. O. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. Spade gouge with octagonal hornbeam handle.

 

Kirschen 3101014 Carving Chisel with Handle Cut 1 Straight 14mm

Kirschen 3101014 Carving Chisel with Handle Cut 1 Straight, 14mm

Kirschen 3101014 Carving Chisel with Handle Cut 1 Straight, 14mm - The widths are from 2 to max. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. Cannot be avoided due to hand-forging. 60 mm. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The professional carving tools are used to carve sculptures and also reliefs. O. Small differences in sizes, shapes a. Carving chisel, straight chisel, with octagonal hornbeam handle. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. S.

 

Kirschen 1151000 Firmer Chisel Set with Hornbeam Handle in Leather Roll 4 Piece

Kirschen 1151000 Firmer Chisel Set with Hornbeam Handle in Leather Roll (4 Piece)

Kirschen 1151000 Firmer Chisel Set with Hornbeam Handle in Leather Roll (4 Piece) - The cutting edges are ground with a standard angle of approximately 25°. The angle of the cutting edge can be adapted to the wood you work with (hard or soft). Electronic monitoring during the forging and hardening process ensures that these high standards are consistently maintained. This careful hand crafting is the source of the high quality and long service life of »two cherries (kirschen)« tools. , Short length, light pattern, beveled edges, with flat hornbeam handle in velour’s leather roll. Firmer chisel set, 6pcs. »Two cherries (kirschen)« chisels are exclusively hand-forged. Uniformly hardened over their entire working length. Sizes 10, 16, 20, 26 mm. Before the first use the cutting edge should be honed to a sharp working edge. At 61 hrc their hardness is well above din (german standards institute) giving them outstanding ability to hold an edge.

 

Kirschen 3128018 Carving Chisel with Handle Cut 7 Spoon Bent 18mm

Kirschen 3128018 Carving Chisel with Handle Cut 7 Spoon Bent, 18mm

Kirschen 3128018 Carving Chisel with Handle Cut 7 Spoon Bent, 18mm - S. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The professional carving tools are used to carve sculptures and also reliefs. Small differences in sizes, shapes a. 60 mm. Carving chisel, spoon bent gouge, with octagonal hornbeam handle. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. The widths are from 2 to max. Cannot be avoided due to hand-forging. O.

 

Kirschen 1112000 Firmer Chisel Set with Hornbeam Handle 6 Piece

Kirschen 1112000 Firmer Chisel Set with Hornbeam Handle (6 Piece)

Kirschen 1112000 Firmer Chisel Set with Hornbeam Handle (6 Piece) - The cutting edges are ground with a standard angle of approximately 25°. »Two cherries (kirschen)« chisels are exclusively hand-forged. Before the first use the cutting edge should be honed to a sharp working edge. This careful hand crafting is the source of the high quality and long service life of »two cherries (kirschen)« tools. Electronic monitoring during the forging and hardening process ensures that these high standards are consistently maintained. Uniformly hardened over their entire working length. The angle of the cutting edge can be adapted to the wood you work with (hard or soft). At 61 hrc their hardness is well above din (german standards institute) giving them outstanding ability to hold an edge.

 

Kirschen 3116010 Carving Chisel with Handle Cut 7 Curved 10mm

Kirschen 3116010 Carving Chisel with Handle Cut 7 Curved, 10mm

Kirschen 3116010 Carving Chisel with Handle Cut 7 Curved, 10mm - O. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. The professional carving tools are used to carve sculptures and also reliefs. Carving chisel, flat curved chisel, with octagonal hornbeam handle. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. 60 mm. Small differences in sizes, shapes a. The widths are from 2 to max. S. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. Cannot be avoided due to hand-forging. This angle may need to be adapted on whether the tools are to be used in hard or soft wood.

 

Kirschen 3174014 Fish Tail Chisel with handle Cut 4 straight 14mm

Kirschen 3174014 Fish Tail Chisel with handle Cut 4 straight 14mm

Kirschen 3174014 Fish Tail Chisel with handle Cut 4 straight 14mm - The following cuts as well as all other illustrations are as true to nature as possible, but not binding. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. 60 mm. Spade gouge with octagonal hornbeam handle. Cannot be avoided due to hand-forging. O. Small differences in sizes, shapes a. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The widths are from 2 to max. S. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The professional carving tools are used to carve sculptures and also reliefs.

 

Kirschen 3171008 Fish Tail Chisel with handle Cut 1 straight 8mm

Kirschen 3171008 Fish Tail Chisel with handle Cut 1 straight 8mm

Kirschen 3171008 Fish Tail Chisel with handle Cut 1 straight 8mm - Cannot be avoided due to hand-forging. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The widths are from 2 to max. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. 60 mm. The professional carving tools are used to carve sculptures and also reliefs. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. S. O. Spade gouge with octagonal hornbeam handle. Small differences in sizes, shapes a.

 

Kirschen 1351006 Swan Neck Mortise Chisel with Hornbeam Handle 6mm

Kirschen 1351006 Swan Neck Mortise Chisel with Hornbeam Handle 6mm

Kirschen 1351006 Swan Neck Mortise Chisel with Hornbeam Handle 6mm - Since 1858, over 155 years family owned, the company with. Kg in remscheid produces high quality woodworking tools with factory brand ››two cherries (kirschen)‹‹, the symbol for the full maturity of the products. Schmitt & comp. Swan neck mortise chisel heavy, strong pattern, with flat hornbeam handle and leather disc. Gmbh & co.

 

Kirschen 3146002 Carving chisel with handle Cut 45 curved 2mm

Kirschen 3146002 Carving chisel with handle Cut 45 curved 2mm

Kirschen 3146002 Carving chisel with handle Cut 45 curved 2mm - The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The widths are from 2 to max. The professional carving tools are used to carve sculptures and also reliefs. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. 60 mm. S. Cannot be avoided due to hand-forging. Small differences in sizes, shapes a. O. Carving chisel, curved v-chisel, with octagonal hornbeam handle. The following cuts as well as all other illustrations are as true to nature as possible, but not binding.

 

Kirschen 1002040 Firmer Chisel with Octagonal Hornbeam Handle 40mm

Kirschen 1002040 Firmer Chisel with Octagonal Hornbeam Handle, 40mm

Kirschen 1002040 Firmer Chisel with Octagonal Hornbeam Handle, 40mm - The angle of the cutting edge can be adapted to the wood you work with (hard or soft). Electronic monitoring during the forging and hardening process ensures that these high standards are consistently maintained. At 61 hrc their hardness is well above din (german standards institute) giving them outstanding ability to hold an edge. Uniformly hardened over their entire working length. Before the first use the cutting edge should be honed to a sharp working edge. The cutting edges are ground with a standard angle of approximately 25°. This careful hand crafting is the source of the high quality and long service life of »two cherries (kirschen)« tools. »Two cherries (kirschen)« chisels are exclusively hand-forged.

 

OdontoMed2011 CHISEL HANDLE FIBER HANDLE WITH BLADES ORTHOPEDIC INSTRUMENTS

OdontoMed2011 CHISEL HANDLE FIBER HANDLE WITH BLADES ORTHOPEDIC INSTRUMENTS

OdontoMed2011 CHISEL HANDLE FIBER HANDLE WITH BLADES ORTHOPEDIC INSTRUMENTS - Odontomed2011® chisel handle fiber handle with blades. Odontomed2011® instruments. Made by quality stainless steel. Odontomed2011® products offer a handmade touch to each instrument. Gauranteed satisfaction and value for money.

 

Kirschen 3116025 Carving Chisel with Handle Cut 7 Curved 25mm

Kirschen 3116025 Carving Chisel with Handle Cut 7 Curved, 25mm

Kirschen 3116025 Carving Chisel with Handle Cut 7 Curved, 25mm - The following cuts as well as all other illustrations are as true to nature as possible, but not binding. 60 mm. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The professional carving tools are used to carve sculptures and also reliefs. Carving chisel, flat curved chisel, with octagonal hornbeam handle. S. Cannot be avoided due to hand-forging. Small differences in sizes, shapes a. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. O. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The widths are from 2 to max.

 

Kirschen 3177006 Fish Tail Chisel with handle Cut 7 straight 6mm

Kirschen 3177006 Fish Tail Chisel with handle Cut 7 straight 6mm

Kirschen 3177006 Fish Tail Chisel with handle Cut 7 straight 6mm - Small differences in sizes, shapes a. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The widths are from 2 to max. S. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The professional carving tools are used to carve sculptures and also reliefs. Spade gouge with octagonal hornbeam handle. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. Cannot be avoided due to hand-forging. O. 60 mm.

 

Stubai 545820 Violin maker chisel with handle Type 8 20mm

Stubai 545820 Violin maker chisel with handle Type 8 20mm

Stubai 545820 Violin maker chisel with handle Type 8 20mm - B. Mbh is proud to carry the national coat of arms. 24 companies belong to this association. Each of these companies is a specialist in a specific product category. H. Since 1960, the cooperative network guarantees to forging under the name “stubai tool industry” for quality. The stubai valley has for centuries been a good ground for the metal processing. Environmental awareness is a major concern of our traditional cooperative. Gen. Responsibly we bear this seal on many export markets and thus do not only represent our company but also our home. Gen. M. The cooperative, as a strong roof, maintains the brand name, is responsible for marketing, sales and logistics. Mother of companies operating under the brand stubai is the stubai tool industry reg. Today, stubai as a brand is present in over 60 countries. From the stubai tool industry two subsidiaries emerged stubai kshb gmbh, production, stubai zmv gmbh, agency for marketing and sales. Not without reason, the stubai tool industry reg.

 

Kirschen 3172002 Fish Tail Chisel with handle Cut 25 straight 2mm

Kirschen 3172002 Fish Tail Chisel with handle Cut 2,5 straight 2mm

Kirschen 3172002 Fish Tail Chisel with handle Cut 2,5 straight 2mm - The widths are from 2 to max. Spade gouge with octagonal hornbeam handle. The professional carving tools are used to carve sculptures and also reliefs. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. Small differences in sizes, shapes a. 60 mm. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. S. O. Cannot be avoided due to hand-forging.

 

Kirschen 3121003 Carving Chisel with Handle Cut 1 Spoon Bent 3mm

Kirschen 3121003 Carving Chisel with Handle Cut 1 Spoon Bent, 3mm

Kirschen 3121003 Carving Chisel with Handle Cut 1 Spoon Bent, 3mm - Carving chisel, spoon bent chisel, straight, with octagonal hornbeam handle. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. The widths are from 2 to max. Small differences in sizes, shapes a. Cannot be avoided due to hand-forging. S. 60 mm. O. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. The professional carving tools are used to carve sculptures and also reliefs. The following cuts as well as all other illustrations are as true to nature as possible, but not binding.

 

Kirschen 3171010 Fish Tail Chisel with handle Cut 1 straight 10mm

Kirschen 3171010 Fish Tail Chisel with handle Cut 1 straight 10mm

Kirschen 3171010 Fish Tail Chisel with handle Cut 1 straight 10mm - O. Small differences in sizes, shapes a. 60 mm. The widths are from 2 to max. The following cuts as well as all other illustrations are as true to nature as possible, but not binding. Spade gouge with octagonal hornbeam handle. The blade length on professional carving tools vary from 4,72 up to 5,52 in depending on the size. This angle may need to be adapted on whether the tools are to be used in hard or soft wood. Cannot be avoided due to hand-forging. The cutting edges of our hand forged carving tools are machine ground to a standard angle of approximately 17°. S. The professional carving tools are used to carve sculptures and also reliefs.