Coolest 25 Hougen Annular Cutters

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 1-38

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-3/8″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-3/8″ - M2 high speed steel, 1″ depth of cut. Use with pilot model #17470. For use with model #hmd150 only.

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 58

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 5/8″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 5/8″ - Use with pilot model #17470. For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-34 2 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-3/4″ 2″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-3/4″ 2″ depth of cut [pack of 1] - Hougen annular cutters, tool material hss size 1-3/4″ 2″ depth of cut [pack of 1].

 

HOUGEN Annular Cutters - Tool Material HSS Size  34 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 3/4″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 3/4″ 1″ depth of cut [pack of 1] - Modified end tooth geometry for stacked plate drilling is available. Features a 3/4-inch diameter shank. Accessory for the “12,000 series” cutters. For general purpose hole making. Made of hardened high speed tool steel and precision ground.

 

Hougen 12136 1-18 X 1 Rotabroach 12000-Series M2 High Speed Steel Magnetic Drill Annular Cutter For Use With Pilot 10527

Hougen 12136 1-1/8″ X 1″ Rotabroach “12,000-Series” M2 High Speed Steel Magnetic Drill Annular Cutter (For Use With Pilot 10527)

Hougen 12136 1-1/8″ X 1″ Rotabroach “12,000-Series” M2 High Speed Steel Magnetic Drill Annular Cutter (For Use With Pilot 10527) - Compared to traditional tooling (twist drills, etc) hougen cutters can multiply your cutting speed by up to 3 times and you get longer tool life, a more accurate hole, a better finish, with no burrs. Two flats for cutter mounting, od margins, id margins, fully fluted tools, patented tooth geometries, material types, coatings, and resharpenability. Hougen has been making “12,000-series” annular cutters since we invented them in 1974 at one time, our president was putting the tooth geometry on every hougen cutter in the world. Hougen cutters with the hougen-edge, feature a patented tooth geometry that provides long tool life, less chatter, and extended resharpenability. Hougen cutters maximize feed rates because up to 10 or more cutting edges distribute the cutting load evenly by converting a smaller area to chips, hougen cutters require less horsepower and thrust american made.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-116 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-1/16″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-1/16″ 1″ depth of cut [pack of 1] - M2 high speed steel, 1″ depth of cut. Use with pilot model #17470. For general purpose hole making.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-38 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-3/8″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-3/8″ 1″ depth of cut [pack of 1] - For use with model #hmd150 only. For general purpose hole making. M2 high speed steel, 1″ depth of cut.

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 1-18

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-1/8″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-1/8″ - M2 high speed steel, 1″ depth of cut. For use with model #hmd150 only. Use with pilot model #17470.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1316 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 13/16″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 13/16″ 1″ depth of cut [pack of 1] - Hougen annular cutters, tool material hss size 13/16″ 1″ depth of cut [pack of 1].

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 1-116

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-1/16″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-1/16″ - Use with pilot model #17470. M2 high speed steel, 1″ depth of cut. For use with model #hmd150 only.

 

HOUGEN Annular Cutters - Tool Material HSS Size  34 2 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 3/4″ 2″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 3/4″ 2″ depth of cut [pack of 1] - Accessory for the rotabroach magnetic drill cutter. For general purpose hole making. Used for materials that are 1-inch thick. For general purpose hole making.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-14 2 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-1/4″ 2″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-1/4″ 2″ depth of cut [pack of 1] - Hole produces a slug of material that could be used for another job. For general purpose hole making.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-58 2 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-5/8″ 2″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-5/8″ 2″ depth of cut [pack of 1] - Accessory for the rotabroach magnetic drill cutter. For use with cutter diameters of 3/4-inch to 2-3/8-inch. Used for materials that are 1-inch thick. For general purpose hole making.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1516 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 15/16″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 15/16″ 1″ depth of cut [pack of 1] - For general purpose hole making. Hole produces a slug of material that could be used for another job.

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 1316

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 13/16″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 13/16″ - For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut. Use with pilot model #17470.

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 78

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 7/8″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 7/8″ - Use with pilot model #17470. For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1″ 1″ depth of cut [pack of 1] - Hougen annular cutters, tool material hss size 1″ 1″ depth of cut [pack of 1].

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-18 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-1/8″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-1/8″ 1″ depth of cut [pack of 1] - Hougen annular cutters, tool material hss size 1-1/8″ 1″ depth of cut [pack of 1].

 

HOUGEN Annular Cutters - Tool Material HSS Size  1116 2 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 11/16″ 2″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 11/16″ 2″ depth of cut [pack of 1] - Hougen annular cutters, tool material hss size 11/16″ 2″ depth of cut [pack of 1].

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 1-316

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-3/16″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-3/16″ - For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut. Use with pilot model #17470.

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 1-516

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-5/16″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 1-5/16″ - Use with pilot model #17470. For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1516 2 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 15/16″ 2″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 15/16″ 2″ depth of cut [pack of 1] - Made of hardened high speed tool steel and precision ground. For general purpose hole making. Accessory for the “12,000 series” cutters. Modified end tooth geometry for stacked plate drilling is available. Features a 3/4-inch diameter shank.

 

HOUGEN Annular Cutters - Tool Material M2 High speed steel Size 34

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 3/4″

HOUGEN Annular Cutters – Tool Material: M2 High speed steel Size: 3/4″ - Use with pilot model #17470. For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut.

 

HOUGEN Annular Cutters - Tool Material HSS Size 2-14

HOUGEN Annular Cutters – Tool Material: HSS Size: 2-1/4″

HOUGEN Annular Cutters – Tool Material: HSS Size: 2-1/4″ - Hole produces a slug of material that could be used for another job. Makes large diameter holes efficiently without the mess of chips.

 

HOUGEN Annular Cutters - Tool Material HSS Size  1-34 1 depth of cut pack of 1

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-3/4″ 1″ depth of cut [pack of 1]

HOUGEN Annular Cutters – Tool Material: HSS Size : 1-3/4″ 1″ depth of cut [pack of 1] - For general purpose hole making. For use with model #hmd150 only. M2 high speed steel, 1″ depth of cut.