Top 16 for Best Hazardous Area

 

HAZARDOUS AREA

HAZARDOUS AREA

HAZARDOUS AREA - Mchl088vs. Safety sign.

 

UGP-20232 HUBBELL KILLARK 20 AMP 250V 2 POLE 3 WIRE ACCEPTOR SERIES • Plug Hazardous Area 20A

UGP-20232 HUBBELL KILLARK 20 AMP, 250V 2 POLE, 3 WIRE ACCEPTOR® SERIES • Plug, Hazardous Area 20A

UGP-20232 HUBBELL KILLARK 20 AMP, 250V 2 POLE, 3 WIRE ACCEPTOR® SERIES • Plug, Hazardous Area 20A - Diameter 223in (565mm) length 70in (1778mm) width 8in (203m) size 55-gallons (208l) voltage 120vac watts 1300. Attached adjustable dual set-point nema 7 temperature controller is connected to a high temperature limit indicator light. Patented grounded heating element is laminated between two layers of 23mm and two layers of 25mm fiberglass reinforced silicone rubber moisture and chemical resistant. Price for each hz 60 material copper-free aluminum number of wires 3 number of poles 2 hp 2 screws stainless steel finish epoxy polyester standards ul (e91049, e53660) / csa (lr14667) item plug voltage 240vac amps 20 nema type 6-20 feed-thru hub (in) 3/4 country of origin (subject to change) china. Dhcx hazardous-area rated drum heater for t4a rated environments is made for metal drums.

 

Brady 124686 Admittance Sign Legend Hazardous Area Authorized Personnel Only 10 Height 14 Width Black on Yellow

Brady 124686 Admittance Sign, Legend “Hazardous Area Authorized Personnel Only”, 10″ Height, 14″ Width, Black on Yellow

Brady 124686 Admittance Sign, Legend “Hazardous Area Authorized Personnel Only”, 10″ Height, 14″ Width, Black on Yellow - Header caution. Legend hazardous area authorized personnel only. Brady offers a variety of facility admittance signs that restrict access or alert both authorized and unauthorized visitors or employees about potential hazards or cautionary notices.

 

Brady 60188  Warning Labels 12 Height x 12 Width Black on Yellow Picto Hazardous Area  10 per Package

Brady 60188, Warning Labels, 1/2″ Height x 1/2″ Width, Black on Yellow, Picto “Hazardous Area” (10 per Package)

Brady 60188, Warning Labels, 1/2″ Height x 1/2″ Width, Black on Yellow, Picto “Hazardous Area” (10 per Package) - 4″ square labels are produced 3 labels per card. Use our warning labels to call attention to hazards on paperwork, equipment and packages in any language without the use of words. Standard package 10 cards. 1/2″, 1″ and 2″ square labels are produced 10 labels per card. 8″ square labels are produced 1 label per card. High quality vinyl labels feature 11 different warning pictograms available in 5 different sizes.

 

HAZARDOUS AREA

HAZARDOUS AREA

HAZARDOUS AREA - Safety sign. Fbr111.

 

HAZARDOUS AREA

HAZARDOUS AREA

HAZARDOUS AREA - Safety sign. Mchl088xl.

 

Brady 41314 14 Width x 10 Height B-555 Aluminum Black and Red on White Chemical and Hazardous Materials Sign Header Danger Legend Hazardous Area

Brady 41314 14″ Width x 10″ Height B-555 Aluminum, Black and Red on White Chemical and Hazardous Materials Sign, Header “Danger”, Legend “Hazardous Area”

Brady 41314 14″ Width x 10″ Height B-555 Aluminum, Black and Red on White Chemical and Hazardous Materials Sign, Header “Danger”, Legend “Hazardous Area” - Average outdoor durability is 5-8 years (average expected outdoor life of product will depend on user definition of failure and climatic conditions. Your employees have the right-to-know. Panels are round-cornered and punched for application to rigid surfaces. Common uses include safety signs, utility signs, information signs and equipment warning signs. ). Brady b-555 aluminum safety sign is an aluminum sign panel with protected graphics. The sign construction is recommended for both indoor and outdoor use. Brady b-555 signs are designed for use in industrial, utility, commercial, and institutional environments. Identify your plant’s chemical storage area with brady’s chemical and hazardous material signs.

 

HAZARDOUS AREA

HAZARDOUS AREA

HAZARDOUS AREA - Safety sign. Mchl090xf.

 

TAPIX 3 x 1000 Yellow Caution Barricade Tape • Bright Yellow w Bold Black Text • 3 inches wide for Maximum Readability • Tear Resistant Design • Used for DangerHazardous areas

TAPIX 3′ x 1000″ Yellow Caution Barricade Tape • Bright Yellow w/ Bold Black Text • 3 inches wide for Maximum Readability • Tear Resistant Design • Used for Danger/Hazardous areas

TAPIX 3′ x 1000″ Yellow Caution Barricade Tape • Bright Yellow w/ Bold Black Text • 3 inches wide for Maximum Readability • Tear Resistant Design • Used for Danger/Hazardous areas - Tear & weather resistant, tapix yellow caution barricade tape is made of premium polyethylene which is very durable the tape is strong and thick enough to hold it’s place when tacked into dry and clean surfaces such as posts or trees. Construction parties, this tape does not only work for dangerous areas the bright yellow tape works well as a decoration for construction themed parties, it could even be used for haunted houses for halloween parties and etc. Safety first, this caution tape plays a pivotal role in safety measures most commonly used in road works, on-going constructions sites or against handling inoperative machinery or appliances with this large roll of caution tape. Tapix brand is known worldwide with superior product quality and service. High visibility, the striking bright yellow color of the barricade tape makes a great contrast with the bold black text which makes it very noticeable when entering a hazardous area made with premium materials, this tape reads well and is not flimsy.

 

HAZARDOUS AREA

HAZARDOUS AREA

HAZARDOUS AREA - Mchl090xl. Safety sign.

 

Accuform MCHG028XV Adhesive Legend DANGER HAZARDOUS AREA AUTHORIZED PERSONNEL ONLY Sign 10 Height 14 Wide 10 Length 0006 Thickness Dura-Vinyl RedBlack on White

Accuform MCHG028XV Adhesive Legend “DANGER HAZARDOUS AREA AUTHORIZED PERSONNEL ONLY” Sign, 10″ Height, 14″ Wide, 10″ Length, 0.006″ Thickness, Dura-Vinyl, Red/Black on White

Accuform MCHG028XV Adhesive Legend “DANGER HAZARDOUS AREA AUTHORIZED PERSONNEL ONLY” Sign, 10″ Height, 14″ Wide, 10″ Length, 0.006″ Thickness, Dura-Vinyl, Red/Black on White - 6-mil thick poly-composite vinyl with permanent acrylic adhesive backing. Adheres to smooth, curved, and irregular surfaces. Complies with osha 29 cfr 1910145 and ansi z535 requirements. Rounded corners and scored backing for quick peel-off and application. Sub-surface image is protected by a high-gloss uv protective coating and is resistant to abrasions, humidity, chemicals, solvents, and fading from sunlight.

 

NMC FS23 Double Sided Floor Sign Legend PARDON OUR APPEARANCE TEMPORARILY UNDER CONSTRUCTION CAUTION HAZARDOUS AREA with Graphic 12 Length x 20 Height Coroplast Black on Yellow

NMC FS23 Double Sided Floor Sign, Legend “PARDON OUR APPEARANCE TEMPORARILY UNDER CONSTRUCTION CAUTION HAZARDOUS AREA” with Graphic, 12″ Length x 20″ Height, Coroplast, Black on Yellow

NMC FS23 Double Sided Floor Sign, Legend “PARDON OUR APPEARANCE TEMPORARILY UNDER CONSTRUCTION CAUTION HAZARDOUS AREA” with Graphic, 12″ Length x 20″ Height, Coroplast, Black on Yellow - Measures 12-inches length by 20-inches height. Legend “pardon our appearance temporarily under construction” and “caution, hazardous area” with graphic. Reversible floor signs with two messages can be reversed when needed. Waterproof sign folds easily for convenient storage. Corrugated plastic material.

 

Killark UGP-20231 Plug Hazardous Area Copper-Free Aluminum 125V 20 Amp 2 Pole 3 Wire 60 Hz 34 Hub Gray

Killark UGP-20231 Plug, Hazardous Area, Copper-Free Aluminum, 125V, 20 Amp, 2 Pole, 3 Wire, 60 Hz, 3/4″ Hub, Gray

Killark UGP-20231 Plug, Hazardous Area, Copper-Free Aluminum, 125V, 20 Amp, 2 Pole, 3 Wire, 60 Hz, 3/4″ Hub, Gray - This commitment underpins our proven ability to supply lower cost total system solutions and savings over the entire lifetime of a project. The killark range encompasses industrial and explosion proof fittings engineered to withstand the toughest extremes in climate from the dry and arid middle east, tropical asia to frozen northern canada. Safety and reliability has been the cornerstone of our business for almost a century. Killark is dedicated to meeting customer needs, with engineering solutions, new product development and on-time delivery in every phase of the project. Established in 1913, killark has become a global provider of harsh and hazardous location products.

 

HAZARDOUS AREA

HAZARDOUS AREA

HAZARDOUS AREA - Mchl088xt. Safety sign.

 

BriskHeat SRX12247202PT4A SRX Hazardous-Area Silicone Rubber Heating Blanket With Pressure Sensitive Adhesive Rating T4A W x L 12 x 24-Inch 240VAC

BriskHeat SRX12247202PT4A SRX Hazardous-Area Silicone Rubber Heating Blanket With Pressure Sensitive Adhesive, Rating: T4A, W x L: 12 x 24-Inch, 240VAC

BriskHeat SRX12247202PT4A SRX Hazardous-Area Silicone Rubber Heating Blanket With Pressure Sensitive Adhesive, Rating: T4A, W x L: 12 x 24-Inch, 240VAC - Patented heating element is laminated between two layers of 23mil and two layers of 25mil fiberglass-reinforced silicone rubber, and is grounded to meet nec 42723. Exclusive hazardous-area approval with a t4a rating and an actual high limit thermostat temperature of 158 degrees f (70 degrees c) moisture, chemical, and radiation resistant. Includes easy-to-apply industrial-strength pressure sensitive adhesive backing suitable for use on metal with a large range of surfaces like tanks, hoppers, conveyors, and silos. Dimensions (w x l) 12 x 24in (305 x 610mm) voltage 240vac wattage 720 power density 25watts/sq in (0004watts/sq mm). Heating blanket has 12in (305mm) long silicone rubber power leads with a bare wire connection and a 075in (19mm) conduit fitting requires temperature controller (sold separately).

 

BriskHeat SRX06243601PT4A SRX Hazardous-Area Silicone Rubber Heating Blanket With Pressure Sensitive Adhesive Rating T4A W x L 6 x 24-Inch 120VAC

BriskHeat SRX06243601PT4A SRX Hazardous-Area Silicone Rubber Heating Blanket With Pressure Sensitive Adhesive, Rating: T4A, W x L: 6 x 24-Inch, 120VAC

BriskHeat SRX06243601PT4A SRX Hazardous-Area Silicone Rubber Heating Blanket With Pressure Sensitive Adhesive, Rating: T4A, W x L: 6 x 24-Inch, 120VAC - Dimensions (w x l) 6 x 24in (152 x 610mm) voltage 120vac wattage 360 power density 25watts/sq in (0004watts/sq mm). Includes easy-to-apply industrial-strength pressure sensitive adhesive backing suitable for use on metal with a large range of surfaces like tanks, hoppers, conveyors, and silos. Exclusive hazardous-area approval with a t4a rating and an actual high limit thermostat temperature of 158 degrees f (70 degrees c) moisture, chemical, and radiation resistant. Patented heating element is laminated between two layers of 23mil and two layers of 25mil fiberglass-reinforced silicone rubber, and is grounded to meet nec 42723. Heating blanket has 12in (305mm) long silicone rubber power leads with a bare wire connection and a 075in (19mm) conduit fitting requires temperature controller (sold separately).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.