Top 18 3d Printer Hot Ends

 

ReliaBot 5PCS M6 X 30 Nozzle Throat with Teflon Tube for MK8 Makerbot 3D Printer Extruder Hot End

ReliaBot 5PCS M6 X 30 Nozzle Throat with Teflon Tube for MK8 Makerbot 3D Printer Extruder Hot End

ReliaBot 5PCS M6 X 30 Nozzle Throat with Teflon Tube for MK8 Makerbot 3D Printer Extruder Hot End - Comes total 5 pieces in one pack and you may use them for quite a long time. Compatible with mk8 extruder. M6 thread, suitable for 175mm filament, great replacement nozzle for 3d printers. There is a ptfe tube inside which ensures fluent passing through of filament. Great parts to built a 3d printer or used as a replacement for old or broken part.

 

3D Printer Hot End Heater Resistor for Jhead and Other Hot Ends 2pcs

3D Printer Hot End Heater Resistor for Jhead and Other Hot Ends 2pcs

3D Printer Hot End Heater Resistor for Jhead and Other Hot Ends 2pcs - Perfect for your reprap hot end. This is used in all j-head hot-ends from mk i to mk v and can be used in your home made hot end may work in other hot ends check your specs. 56ohm, 5w, 1%. Pack of 2 resistors.

 

TOOGOOR 3PCS Nozzle 04mm for RepRap 3D Printer Hot End compatible with Golden

TOOGOO(R) 3PCS Nozzle 0.4mm for RepRap 3D Printer Hot End compatible with Golden

TOOGOO(R) 3PCS Nozzle 0.4mm for RepRap 3D Printer Hot End compatible with Golden - The measurement allowed error is 1-3cm. Our products will enhance your experience to unparalleled inspiration. 4mm. Toogoo(r) 3pcs nozzle 0. 5mmhex size 8mmpackage contents 3 x brass nozzle 0. 4mm for reprap 3d printer hot end compatible with goldenthread size m6x1length 12. Only authorized seller of toogoo can sell under toogoo listings. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing. Toogoo is a registered trademark.

 

5pcs Stainless Steel Nozzle Throat PTFE Tube For 3D Printer MK8 Extruder 175mm Hot End Accessory M640mm

5pcs Stainless Steel Nozzle Throat PTFE Tube For 3D Printer MK8 Extruder 1.75mm Hot End Accessory (M640mm)

5pcs Stainless Steel Nozzle Throat PTFE Tube For 3D Printer MK8 Extruder 1.75mm Hot End Accessory (M640mm) - M6 thread, suitable for 175mm filament, great replacement nozzle for 3d printers. Comes total 5 pieces in one pack and you may use them for quite a long time. There is a ptfe tube inside which ensures fluent passing through of filament. Compatible with mk8 extruder. Great parts to built a 3d printer or used as a replacement for old or broken part.

 

10PCS Makerbot Replicator 1 2 Replacement MK8 04mm Nozzle 3D Printer Hot End

10PCS Makerbot Replicator 1 & 2 Replacement MK8 0.4mm Nozzle 3D Printer Hot End

10PCS Makerbot Replicator 1 & 2 Replacement MK8 0.4mm Nozzle 3D Printer Hot End - Mk8 has shorter length of extrusion channel than mk7, which helps to extrude plastic with less force. Mk8 nozzle represent improvement over previously used mk7 nozzle. You will receive 10 pcs mk8 replacement nozzle. Makerbot mk8 0. 4mm replacement nozzle for replicator 1 & 2 stepstruder.

 

Walmeck Aluminum Heater Block All-Metal 20 20 10mm for MK7 MK8 Extruder RepRap i3 DIY 3D Printer Hot End

Walmeck Aluminum Heater Block All-Metal 20 20 10mm for MK7 MK8 Extruder RepRap i3 DIY 3D Printer Hot End

Walmeck Aluminum Heater Block All-Metal 20 20 10mm for MK7 MK8 Extruder RepRap i3 DIY 3D Printer Hot End - Reliable accessory for 3d printer diy lovers. Refined aluminum material, durable for use, suits for mk7 / mk8 extruder 3d printer hot end. M6 mounting hole works perfect with nozzle & nozzle throat. M3 inner holes for thermocouple & mounting screw. 6mm diameter hole for mounting heater.

 

TOOGOOR 3PCS Nozzle 05mm for RepRap 3D Printer Hot End compatible with Golden

TOOGOO(R) 3PCS Nozzle 0.5mm for RepRap 3D Printer Hot End compatible with Golden

TOOGOO(R) 3PCS Nozzle 0.5mm for RepRap 3D Printer Hot End compatible with Golden - Toogoo is a registered trademark. Toogoo(r) 3pcs nozzle 0. 5mmhex size 8mmpackage contents3 x brass nozzle 0. Only authorized seller of toogoo can sell under toogoo listings. Our products will enhance your experience to unparalleled inspiration. The measurement allowed error is 1-3cm. 5mm. 5mm for reprap 3d printer hot end compatible with goldenthread size m6x1length 12. Notelight shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.

 

3D Printer hot end with Fan Style All Metal J Head Hotend Kit for 3mm filament 04mm nozzle

3D Printer hot end with Fan Style All Metal J Head Hotend Kit for 3mm filament 0.4mm nozzle

3D Printer hot end with Fan Style All Metal J Head Hotend Kit for 3mm filament 0.4mm nozzle - If the filament drive mechanism is placed on a non-moving part of the 3d printer, it can be pushed into a tube. Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. Ptfe (teflon) is useful because it is slippery it has little friction with the plastic. This all-metal j-head hot end has faster controlled motion, less shaking of your machine, less energy use and importantly faster printing. This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking.

 

Fenteer M6x30mm Extruder Hotend Nozzle Throat for 175mm 3D Printer Hot End

Fenteer M6x30mm Extruder Hotend Nozzle Throat for 1.75mm 3D Printer Hot End

Fenteer M6x30mm Extruder Hotend Nozzle Throat for 1.75mm 3D Printer Hot End - 75mm diameter filament. Description, durable extruder throat universal for 3d printer replacement. 75mm pla abs 3d printer, high quality materials, fine workmanshipspecification, material stainless steel & teflon, input diameter 1., Made of stainless steel & teflon, outer thread m6, compatibility compatible with all 1., Suits for 1. 75mm, external thread diameter 6mm/m6, total length 30mm, inner diameter 2mm (with teflon ptfe) 4mm (the other side)package includes1piecexnozzle throat.

 

3D Printer hot end with Fan Style All Metal J Head Hotend Kit for 175mm filament 04mm nozzle

3D Printer hot end with Fan Style All Metal J Head Hotend Kit for 1.75mm filament 0.4mm nozzle

3D Printer hot end with Fan Style All Metal J Head Hotend Kit for 1.75mm filament 0.4mm nozzle - This creates problems of balance and oscillations with faster motion which you can see in your printing results and hear and feel when your machine is shaking. Normally the mechanism that drives the filament into the hot end (where it melts) is directly on top of the extruder. If the filament drive mechanism is placed on a non-moving part of the 3d printer, it can be pushed into a tube. Ptfe (teflon) is useful because it is slippery it has little friction with the plastic. This all-metal j-head hot end has faster controlled motion, less shaking of your machine, less energy use and importantly faster printing.

 

Custom Right Side and Single Extruder Hot End for Zim 3d Printers

Custom Right Side and Single Extruder Hot End for Zim 3d Printers

Custom Right Side and Single Extruder Hot End for Zim 3d Printers - 40 watt heat cartridge, printer heats up quickly. Replacement part for right side extruder or single extruder models. Easy replacement allows use of standard 6mm nozzles and throat pieces. Resolves the issue with frozen or seized nozzles. Works as well as or better than original.

 

REPKORD 24v 40W 6mm x 20mm Stainless Steel Cartridge Heater RepRap for 3D Printer Hot-End E3D V6 and Volcano Compatible

REPKORD 24v 40W 6mm x 20mm Stainless Steel Cartridge Heater RepRap for 3D Printer Hot-End E3D V6 and Volcano Compatible

REPKORD 24v 40W 6mm x 20mm Stainless Steel Cartridge Heater RepRap for 3D Printer Hot-End E3D V6 and Volcano Compatible - 1m long cable for use in delta stlye configurations. Compatible with e3d v6 volcano and other hot-ends. 24 volts. 20mm length, 6mm diameter, 40in (1m) wire length. 40 watts.

 

WAHHING PEEK J-Head Hot End Aluminum Integrated Hot End 04mm Nozzle 175mm Filament 12V 40W Heater NTC 3950 Thermistor Hotend for Reprap 3D printer Accessories Hotend

WAHHING PEEK J-Head Hot End, Aluminum Integrated Hot End, 0.4mm Nozzle, 1.75mm Filament, 12V 40W Heater, NTC 3950 Thermistor Hotend for Reprap 3D printer Accessories Hotend

WAHHING PEEK J-Head Hot End, Aluminum Integrated Hot End, 0.4mm Nozzle, 1.75mm Filament, 12V 40W Heater, NTC 3950 Thermistor Hotend for Reprap 3D printer Accessories Hotend - Ntc 3950 100k high accuracy 1% pre-wired thermistor. Aluminum integrated peek j-head hot end. 12v 40w heater(wiring insulation high temperature teflon/ptfe, 2 times more expensive than ordinary lines ). High precision nozzle 04mm,high-quality peek heat-insulated pipe. High precision, not blocking the nozzle, do not plug the pipeline, for low friction, trouble free print can be used directly.

 

ReliaBot 10PCs 04mm Extruder Nozzle Cleaning Drill for 3D Printer Hot End

ReliaBot 10PCs 0.4mm Extruder Nozzle Cleaning Drill for 3D Printer Hot End

ReliaBot 10PCs 0.4mm Extruder Nozzle Cleaning Drill for 3D Printer Hot End - If it is useless after cleaning the nozzle with this drill, please make sure the extruder works fine and the nozzle throat has not been clogged. Please preheat the nozzle over 200°c if it was printing with pla filament before cleaning the nozzle. Be careful when using it, and keep it away from children. Please preheat the nozzle over 230°c if it was printing with abs filament before cleaning the nozzle.

 

HICTOP Assembled Extruder Hot End for RepRap 3D Printer 175mm Filament 04mm Nozzle 24V 40W Heater NTC Thermistor Hotend

HICTOP Assembled Extruder Hot End for RepRap 3D Printer 1.75mm Filament, 0.4mm Nozzle, 24V 40W Heater, NTC Thermistor Hotend

HICTOP Assembled Extruder Hot End for RepRap 3D Printer 1.75mm Filament, 0.4mm Nozzle, 24V 40W Heater, NTC Thermistor Hotend - 4mm material copper (brass) size 13mm6mm warning small parts, keep away from children. 75mm material stainless steel extruder brass nozzle nozzle 0. Specification extruder tube compatibility 3d printer outer thread m6 inner diameter 2mm length 30mm filament diameter 1. 75mm output diameter 0. 4mm input diameter 1.

 

Qipang 5PCS PC4-M6 Male Thread Push to Connect Pneumatic Quick Plug Hot Head Hot End Trachea Connector Brass 175mm Inlet For PTFE Tube 3D Printer Connector

Qipang 5PCS PC4-M6 Male Thread Push to Connect Pneumatic Quick Plug Hot Head Hot End Trachea Connector Brass 1.75mm Inlet For PTFE Tube 3D Printer Connector

Qipang 5PCS PC4-M6 Male Thread Push to Connect Pneumatic Quick Plug Hot Head Hot End Trachea Connector Brass 1.75mm Inlet For PTFE Tube 3D Printer Connector - Model pc4-m6. Pc4-m6 pneumatic connector for bowden extruder ¨c push fit ¨c ptfe easy to connect by inserting the tube it will automatically lock tight easy to disconnect tube by one push on the blue cap. Ptfe tubing od 4 mm. Package contents 5 x pc4-m6 pneumatic connector for bowden extruder. Thread 6 mm.

 

kee pang 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for 3D Printer Heatbed or Hot End-5 pcs

kee pang 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for 3D Printer Heatbed or Hot End-5 pcs

kee pang 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and Female Pin Head for 3D Printer Heatbed or Hot End-5 pcs - Temperature sensor 100kΩ accuracy of ± 1%. Use it with heated bed or extruder. Pack of 5pcs. Conviniently pre-wired with 1 meter long high temperature ptfe insulated wiring. Wiring length 1 meter.

 

Aibecy Aluminum Heater Block All-Metal 20 20 10mm for MK7 MK8 Extruder RepRap i3 DIY 3D Printer Hot End

Aibecy Aluminum Heater Block All-Metal 20 20 10mm for MK7 MK8 Extruder RepRap i3 DIY 3D Printer Hot End

Aibecy Aluminum Heater Block All-Metal 20 20 10mm for MK7 MK8 Extruder RepRap i3 DIY 3D Printer Hot End - 6mm diameter hole for mounting heater. M3 inner holes for thermocouple & mounting screw. M6 mounting hole works perfect with nozzle & nozzle throat. Refined aluminum material, durable for use, suits for mk7 / mk8 extruder 3d printer hot end. Reliable accessory for 3d printer diy lovers.