Top 19 Best Mag Drills

 

Metabo MAG 28 LTX 252-Volt Cordless Magnetic Drill Press #ad

Metabo MAG 28 LTX 25.2-Volt Cordless Magnetic Drill Press

Metabo MAG 28 LTX 25.2-Volt Cordless Magnetic Drill Press #ad - A safety cut-out protects the operators in the event a battery is inserted with the machine in the on position. A permanent rare earth magnet, requiring no energy from the battery, allows the use of the mag drill in remote and previously inaccessible environments. An integrated gravity coolant container with through-the-spindle coolant feed is also included. The mag 28 ltx features electronic thermal overload protection and jam protection to help ensure the longevity of the 25. Metabos air-cooled charging technology cools the battery pack during charging to shorten the charging process by up to 30-percent. The tool offers a maximum drilling depth of 2-inch. The drill has a prism-shaped magnetic base that enables users to work on pipe as well, further increasing the flexibility of this drill throughout steel construction applications. 2-volt, 3. The tools magnetic stand has a maximum stroke of 6-5/16-inch. 2-volt, 3. The cordless tools 25. This first-to-market cordless electromagnetic drill press can be used with annular cutters, spiral drills and countersinks, featuring a maximum drilling diameter of 1-1/4-inch with an annular cutter and 1/2-inch with a spiral drill. The 2-speed tool boasts 380 or 680 no load revolutions per minute and is designed with a dual-level, permanently lubricated gearbox for speed and torque optimization. 2-volt motor. A weldon 3/4 ” tool holder, ejector pin, chuck adaptor and geared chuck, chuck key, mt 2 drift key, safety strap, allen key and two 25. The new mag 28 ltx utilizes a 25. 0 ah li-ion battery packs come standard with metabos mag 28 ltx. The unique rare earth magnet offers up to 2,500-pound of holding force, which can be adjusted for precise positioning when drilling on vertical, horizontal and sloped surfaces. 2-volt li-ion battery to power the tool. 0 ah li-ion battery pack charges rapidly in a 15 minute charger. In addition, the mag 28 ltx is warranted for three-years under metabos industry-leading xxl warranty.

 

Hougen HMD927 MAG DRILL - 2 SPDPWR FEEDSWIVELCOOLANT - 115V 0927104 #ad

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/SWIVEL/COOLANT – 115V (0927104)

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/SWIVEL/COOLANT – 115V (0927104) #ad - Pilot light, for low light or no light conditions. Powerful high torque hougen motor and gears. Smart technology optimizes feed rate for increased tool life and excellent hole quality. Two speed gear box, 250 & 450 rpm. Large 1-5/8″ x 2″ capacity.

 

Jancy Magforce Portable Magnetic-Base Drill 120V 102 Amp Motor 1-58 Diameter x 2 Depth Capacity #ad

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8″ Diameter x 2″ Depth Capacity

Jancy Magforce Portable Magnetic-Base Drill, 120V, 10.2 Amp Motor, 1-5/8″ Diameter x 2″ Depth Capacity #ad - 120v, 102 amp magnetic-base drill press with 16 horsepower (hp) 1200 watt single-phase motor weighs 27 lb. Stationary motor ensures the working height remains constant. 1-5/8″ maximum cutting diameter and 2″ maximum cutting depth. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. 1810 lb magnet dead lift and 1096 lb drill point breakaway on 1″ thick steel.

 

Hougen HMD904 MAG DRILL - FABRICATORS KIT FRACTIONAL - 115V 0904105 #ad

Hougen HMD904 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0904105)

Hougen HMD904 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0904105) #ad - • 1-1/2″ dia x 2″ capacity• pilot light• positive slug ejection• many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. 9 lbs (13. 1 kg)• cutter dia max 1-1/2″ (38mm)• depth of cut max 2″ (50mm). • Weight 28.

 

Jancy JHM Series ShortSlugger Magnetic Base Drilling Unit 750W 2 Cutting Depth #ad

Jancy JHM Series ShortSlugger Magnetic Base Drilling Unit, 750W, 2″ Cutting Depth

Jancy JHM Series ShortSlugger Magnetic Base Drilling Unit, 750W, 2″ Cutting Depth #ad - 430 watt power output. Easy guide adjustment. Contact and chip guard. Jancy engineering jhm short slugger. 1-3/16-inches maximum cutter diameter. 430 rpm load speed. 680 rpm no load speed. 13-feet cable with plug. 3/4-inches weldon shank cutter holder. The jhm is a small, but powerfull drill that packs an unexpected punch in a compact 22 pound package. Magnet foot measures 7-inches by 3-3/4-inches. Extremely compact mag base drilling unit for on-site drilling. Concealed motor wiring prevents wires from snagging or getting caught in tight spaces. With all metal construction and “smart magnet” circuitry is a durable and efficient unit. 750 watt power consumption. Right or left hand feed handles. It has through spindle coolant and a multi-position coolant bottle and a patented internal motor cord. Includes (1) case, (1) coolant tank, (1) safety strap, (1) chip hook, (2) centering pins, (1) 5-millimeters hexagon wrench, (1) safety guard. 1800 pounds magnetic holding force. 2-1/2-inches stroke. Handwheel position can be changed in order to work in confined spaces. Measures 9. 02-inches to 14. 68-inches width. 65-inches length by 7. 2-inches maximum cutter drilling depth. Gravity-fed cooling lubrication. 11. 17-inches height. Optimum power/weight ratio for working at height.

 

Hougen HMD905 MAG DRILL - FABRICATORS KIT FRACTIONAL - 115V 0905105 #ad

Hougen HMD905 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0905105)

Hougen HMD905 MAG DRILL – FABRICATOR’S KIT FRACTIONAL – 115V (0905105) #ad - Large 1-5/8″ x 2″ capacity. Powerful high torque hougen motor and gears. Pilot light, for low light or no light conditions. Two speed gear box, 250 & 450 rpm. Many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more.

 

Hougen HMD917 MAG DRILL - 2 SPDCOOLANT - 115V 0917102 #ad

Hougen HMD917 MAG DRILL – 2 SPD/COOLANT – 115V (0917102)

Hougen HMD917 MAG DRILL – 2 SPD/COOLANT – 115V (0917102) #ad - Two speed gear box, 250 & 450 rpm. Our most powerful high torque motor. Two stage magnet, 30% increase in power when motor is turned on. Pilot light, for low light or no light conditions. Large 2-3/8″ x 3″ capacity.

 

Nitto Kohki Wa-3500 Auto Mag Drill #ad

Nitto Kohki Wa-3500 Auto Mag. Drill

Nitto Kohki Wa-3500 Auto Mag. Drill #ad - Standard features 1-3/8″ x 2 ” hole drilling capacity automatic feed with slow start mechanism step feed feature optimizes cutter penetration load detection system monitors and regulates motor speeed and cutting feed powerful 1100 watt double insulated motor overload stop detection system helps prevent motor and cutter damage load detection system monitors and regulates motor speed and cutting feed sealed arbor system with through spindle coolant built-in motion detection system one touch arbor system no tools required for cutter installation and removal accepts carbide tipped and high speed annular cutters precision machined die cast aluminum mainframe, motor slide and arbor support bracket one year limited warranty standard accessories 1-3/8″ & 2″ pilot pin 3 mm allen wrench 8 x 10 mm combination wrench chip guard assembly motor side handle sample cutting fluid safety chain carrying case.

 

Hougen HMD927 MAG DRILL - 2 SPDPWR FEEDCOOLANT - 115V 0927102 #ad

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/COOLANT – 115V (0927102)

Hougen HMD927 MAG DRILL – 2 SPD/PWR FEED/COOLANT – 115V (0927102) #ad - Two stage magnet, 30 percent increase in power when motor is turned on positive slug ejection, integrated coolant bottle, lift detector safety system. Included hougen hmd927, pint of coolant, safety chain, and hex wrenches made in usa. Smart technology optimizes feed rate for increased tool life and excellent hole qualitysingle handle to engage power feed system, selectable manual/power feed mode. A powerful two speed power feed mag drill with great power to weight ratio. Large 1-5/8″ x 2″ capacity, powerful high torque hougen motor and gears, two speed gear box, 250 and 450 rpm, pilot light, for low light or no light conditions.

 

Jancy JMH1200 Portable Magnetic-Base Drill Hydraulic Motor 2 Diameter x 2 Depth Capacity #ad

Jancy JMH1200 Portable Magnetic-Base Drill, Hydraulic Motor, 2″ Diameter x 2″ Depth Capacity

Jancy JMH1200 Portable Magnetic-Base Drill, Hydraulic Motor, 2″ Diameter x 2″ Depth Capacity #ad - Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. Hydraulic motor for use in non-sparking environments or underwater at depths up to 450′. 1/2″ nptf hydraulic port adapter has two ports port a (clockwise) and port b (counter-clockwise). 2″ maximum cutting diameter,2″ maximum cutting depth, and 600 lb drill point breakaway on 1″ thick steel. Operates at speeds up to 1100 rpms.

 

Hougen HMD904 115-Volt Magnetic Drill #ad

Hougen HMD904 115-Volt Magnetic Drill

Hougen HMD904 115-Volt Magnetic Drill #ad - All drills include carrying case, pint of coolant, safety chain, & hex wrenches. Large 1-1/2″ x 2″ capacity. New -two stage magnet, 30% power increase when motor is turned on. New, slot drive arbor for more accuracy and quicker change out of accessories. New, pilot light, for low light or no light conditions.

 

G&J Hall Tools REVO Low Profile 35 Magnetic Drill Press 1-38 Cutting Capacity 110V 4 Width x 8 Height x 11-14 Depth #ad

G&J Hall Tools REVO Low Profile 35 Magnetic Drill Press, 1-3/8″ Cutting Capacity, 110V, 4″ Width x 8″ Height x 11-1/4″ Depth

G&J Hall Tools REVO Low Profile 35 Magnetic Drill Press, 1-3/8″ Cutting Capacity, 110V, 4″ Width x 8″ Height x 11-1/4″ Depth #ad - Quick-release arbor for quick cutter changes. Revo low profile 35 magnetic drill press has the same 1-3/8″ cutting capacity as the r322 model but can fit into tight spaces. Magnetic adhesion is 3365 lb for a secure hold. Motor is 1100 watts for reliable power in various applications. Reversible stroke handle and easy-access control panel for ease of use.

 

Steel Dragon Tools Replacement Motor Brushes for SDT MD13 Mag Drill SDT-MD101 #ad

Steel Dragon Tools Replacement Motor Brushes for SDT MD13 Mag Drill (SDT-MD101)

Steel Dragon Tools Replacement Motor Brushes for SDT MD13 Mag Drill (SDT-MD101) #ad - Replacement brushes for steel dragon tools® md13 magnetic drill press. Steel dragon tools® replacement motor brushes for sdt md13 mag drill (sdt-md101)steel dragon tools® replacement motor brushes for steel dragon tools® md13 magnetic drill press (sdt-md101). Quantity 2 packpart number sdt-md101-brfits model sdt-md101.

 

Hougen HMD904 115-Volt Magnetic Drill wcoolant bottle plus 12 drill chuck adapter and 12002 rotabroach cutter kit #ad

Hougen HMD904 115-Volt Magnetic Drill w/coolant bottle plus 1/2″ drill chuck, adapter and 12002 rotabroach cutter kit

Hougen HMD904 115-Volt Magnetic Drill w/coolant bottle plus 1/2″ drill chuck, adapter and 12002 rotabroach cutter kit #ad - New, slot drive arbor for more accuracy and quicker change out of accessories, new, housing, stronger stiffer, more ergonomic, positive slug ejection. Feed handles quickly change from side to side, lift detector safety system, rear mounted controls, gravity feed coolant system (hmd904 w/ coolant bottle) made in us a one year warranty. Fabricators kit includes hmd904 w/coolant bottle plus 1/2″ drill chuck, adapter and 12002 rotabroach cutter kit. Large 7/16″-1-1/2″ dia / 2″ doc capacity and a 450 rpm motor new, pilot light for low light or no light conditions, new, two stage magnet 30% power increase when motor is turned on. The mag drill of choice for fabrication lightweight, compact, powerful, & versatile now better than ever completely redesigned with more features.

 

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904 #ad

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904!

HOUGEN HMD905 MAG DRILL FABRICATORS KIT FRACTIONAL MORE POWERFUL THAN A HMD904! #ad - Pilot light, for low light or no light conditions. Large 1-5/8″ x 2″ capacity. Powerful high torque hougen motor and gears. Many accessories are available for a portable machine shop including drill chucks, tapping, countersink, and more. Two speed gear box, 250 & 450 rpm.

 

Magafor 80007031700  Red-X Cobalt Combi-Mag Drill Bit 18 Diameter #ad

Magafor 80007031700 Red-X Cobalt Combi-Mag Drill Bit, 1/8″ Diameter

Magafor 80007031700 Red-X Cobalt Combi-Mag Drill Bit, 1/8″ Diameter #ad - The product is manufactured in france. Easy installation. 1/8 red-x co combi-mag.

 

BOGDAN 82040 Mag-Drill with Ejector Pin High Speed Steel M2 1-18 Diameter 1 Cut Length #ad

BOGDAN 82040 Mag-Drill with Ejector Pin, High Speed Steel M2, 1-1/8″ Diameter, 1″ Cut Length

BOGDAN 82040 Mag-Drill with Ejector Pin, High Speed Steel M2, 1-1/8″ Diameter, 1″ Cut Length #ad - Because they remove metal only at the periphery of the hole being cut, bogdan mag drills require less power and thrust than conventional twist drills, effectively increasing the capacity of your existing machines. Multiple cutting edges produce higher feed rates, lower cutting resistance and better quality holes for increased productivity and longer tool life.

 

Hougen HMD904 MAG DRILL - SWIVELCOOLANT - 115V 0904104 #ad

Hougen HMD904 MAG DRILL – SWIVEL/COOLANT – 115V (0904104)

Hougen HMD904 MAG DRILL – SWIVEL/COOLANT – 115V (0904104) #ad - Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments. Hydraulic motor for use in non-sparking environments or underwater at depths up to 450′. 1/2″ nptf hydraulic port adapter has two ports port a (clockwise) and port b (counter-clockwise). Operates at speeds up to 1100 rpms. 2″ maximum cutting diameter,2″ maximum cutting depth, and 600 lb drill point breakaway on 1″ thick steel.

 

Jancy Holemaker II Portable Magnet-Base Drill 120V 115 Amp Motor 1-38 Diameter x 2 Depth Capacity #ad

Jancy Holemaker II Portable Magnet-Base Drill, 120V, 11.5 Amp Motor, 1-3/8″ Diameter x 2″ Depth Capacity

Jancy Holemaker II Portable Magnet-Base Drill, 120V, 11.5 Amp Motor, 1-3/8″ Diameter x 2″ Depth Capacity #ad - 2350 lb magnet dead lift and 1095 lb drill point breakaway on 1″ thick steel. 1-3/8″ maximum cutting diameter and 2″ maximum cutting depth. 120v, 115 amp magnetic-base drill press with 175 horsepower (hp) 1380 watt single-phase motor weighs 30 lb. Powerful magnet with compact dimensions, for fabricating in confined spaces. Magnetic field detection, integrated chip guard, and safety strap, to help ensure safe working environments.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.