Top 20 Mechanical Dock Levelers

 

Mechanical Dock Leveler - BM3 Series Capacity 35000 Width 78 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 78″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 78″; Height: 24″; Length: 10′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Levelers

Mechanical Dock Levelers

Mechanical Dock Levelers -     Specifications smooth pull chain operation service range is 12″ above and below dock 16″ lip units include a telescopic steel toe guard on both sides two laminated bumpers come standard     options dual weather stripping (factory installed), model ws-dv emergency stop, model es curb angle set, model cas under deck foam insulation, model fi leg option for in front of dock placement, contact us for info steel shell for pour in place installation, contact us for info      .   Sizing a dockleveler for installation in an existing pit can be difficult. Measure pit height at front and back of pit. A 1/4″ checker plate deck made of (55,000 psi) steel and a 6″ structural steel support understructure provide for a long service life. Vestil rr- series mechanical docklevelers allow the operator to quickly and easily load/unload trucks. Com if you need a custom capacity. These rugged units are designed for minimum maintenance. We recommend that you complete this survey sheet (pdf) and fax it to us so we may recommend a size for a proper fit. Capacities of up to 50,000 lbs available, please contact hofequipment.

 

Mechanical Dock Leveler - BM3 Series Capacity 40000 Width 78 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 78″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 78″; Height: 24″; Length: 10′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 35000 Width 72 Height 19 Length 8

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 72″; Height: 19″; Length: 8′

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 72″; Height: 19″; Length: 8′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 45000 Width 78 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 45,000; Width: 78″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 45,000; Width: 78″; Height: 24″; Length: 10′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Mechanical Dock Leveler - BM3 Series Capacity 40000 Width 83 Height 19 Length 8

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 83″; Height: 19″; Length: 8′

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 83″; Height: 19″; Length: 8′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Mechanical Dock Leveler - BM3 Series Capacity 50000 Width 72 Height 19 Length 8

Mechanical Dock Leveler – BM3 Series; Capacity: 50,000; Width: 72″; Height: 19″; Length: 8′

Mechanical Dock Leveler – BM3 Series; Capacity: 50,000; Width: 72″; Height: 19″; Length: 8′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Mechanical Dock Leveler - BM3 Series Capacity 50000 Width 72 Height 19 Length 8

Mechanical Dock Leveler – BM3 Series; Capacity: 50,000; Width: 72″; Height: 19″; Length: 8′

Mechanical Dock Leveler – BM3 Series; Capacity: 50,000; Width: 72″; Height: 19″; Length: 8′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Mechanical Dock Leveler - BM3 Series Capacity 60000 Width 83 Height 19 Length 8

Mechanical Dock Leveler – BM3 Series; Capacity: 60,000; Width: 83″; Height: 19″; Length: 8′

Mechanical Dock Leveler – BM3 Series; Capacity: 60,000; Width: 83″; Height: 19″; Length: 8′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 35000 Width 83 Height 19 Length 6

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 83″; Height: 19″; Length: 6′

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 83″; Height: 19″; Length: 6′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 35000 Width 72 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 72″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 72″; Height: 24″; Length: 10′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Vestil FM-2072 Mechanical Edge-O-Dock Leveler 20000-lb Capacity 72 Usable Width

Vestil FM-2072 Mechanical Edge-O-Dock Leveler, 20,000-lb. Capacity, 72″ Usable Width

Vestil FM-2072 Mechanical Edge-O-Dock Leveler, 20,000-lb. Capacity, 72″ Usable Width - What’s in the boxfm-2072 dock leveler(2) bumpersactuating handleinstallation instructions. It does not require a concrete recess and has a 5″ service range above and below the dock. The company, founded in 1968, is headquartered in angola, in. The handle is placed into the pocket of the inner lip and pulled down toward the floor, then pushed forward until the lip rests on the truck or trailer bed. When the truck departs, the lip automatically retracts behind the bumper face. Bumpers measuring 18 x 8 x 2 inches (h x w x l) are located on each end for protecting the dock and truck. This mechanical dock leveler measures 18 x 99 x 15 inches (h x w x l) when in stored position and has a 20,000-lb. (H is height, the vertical distance from the lowest to highest point w is width, the horizontal distance from left to right l is length, the horizontal distance from front to back. ) Recommended for docks at least 48″ in height. This vestil fm-2072 edge-o-dock mechanical dock leveler attaches permanently to any loading dock with a steel edge or approach ramp and corrects height differences between a truck and the dock for smooth loading and unloading. Vestil manufactures materials handling equipment, including hoists and trolleys, jib and gantry cranes, loading dock equipment, and storage solutions. The ramping length is 29″ when extended, with a 72″ usable width. Capacity. It has a mechanical spring counterbalance and is operated using an actuation handle. It is made of steel for strength and durability and has a non-skid raised treadplate pattern for safety.

 

Mechanical Dock Leveler - BM3 Series Capacity 30000 Width 83 Height 19 Length 8

Mechanical Dock Leveler – BM3 Series; Capacity: 30,000; Width: 83″; Height: 19″; Length: 8′

Mechanical Dock Leveler – BM3 Series; Capacity: 30,000; Width: 83″; Height: 19″; Length: 8′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 50000 Width 72 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 50,000; Width: 72″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 50,000; Width: 72″; Height: 24″; Length: 10′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 35000 Width 78 Height 19 Length 6

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 78″; Height: 19″; Length: 6′

Mechanical Dock Leveler – BM3 Series; Capacity: 35,000; Width: 78″; Height: 19″; Length: 6′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Mechanical Dock Leveler - BM3 Series Capacity 40000 Width 72 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 72″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 72″; Height: 24″; Length: 10′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Mechanical Dock Leveler - BM3 Series Capacity 45000 Width 83 Height 24 Length 10

Mechanical Dock Leveler – BM3 Series; Capacity: 45,000; Width: 83″; Height: 24″; Length: 10′

Mechanical Dock Leveler – BM3 Series; Capacity: 45,000; Width: 83″; Height: 24″; Length: 10′ - This is useful in loading dock applications where the truck height is higher or lower than the dock height. The building mechanical dock leveler compensates for height disparities between loading docks and truck beds.

 

Vestil FM-3072 Mechanical Edge-O-Dock Levelers 30000 lb Capacity 72 Brown

Vestil FM-3072 Mechanical Edge-O-Dock Levelers, 30000 lb. Capacity, 72″, Brown

Vestil FM-3072 Mechanical Edge-O-Dock Levelers, 30000 lb. Capacity, 72″, Brown - Tread plate design offers a positive non-slip gripping action. Product design conveniently does not require a concrete recess. Easy install allows unit to quickly mount to any loading dock with a steel dock edge. Solid steel construction offers long lasting reliable use.

 

Mechanical Dock Leveler - BM3 Series Capacity 30000 Width 78 Height 19 Length 6

Mechanical Dock Leveler – BM3 Series; Capacity: 30,000; Width: 78″; Height: 19″; Length: 6′

Mechanical Dock Leveler – BM3 Series; Capacity: 30,000; Width: 78″; Height: 19″; Length: 6′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.

 

Mechanical Dock Leveler - BM3 Series Capacity 40000 Width 83 Height 19 Length 6

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 83″; Height: 19″; Length: 6′

Mechanical Dock Leveler – BM3 Series; Capacity: 40,000; Width: 83″; Height: 19″; Length: 6′ - The building mechanical dock leveler compensates for height disparities between loading docks and truck beds. This is useful in loading dock applications where the truck height is higher or lower than the dock height.