Top 21 1212ks

 

Sandvik Coromant SDJCL 1212K 07-S Turning Insert Holder Square Shank Steel External Screw Clamp Left Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width DCMT 2151 Insert Size 93 Degree Entering Angle #ad

Sandvik Coromant SDJCL 1212K 07-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 2(1.5)1 Insert Size, 93 Degree Entering Angle

Sandvik Coromant SDJCL 1212K 07-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 2(1.5)1 Insert Size, 93 Degree Entering Angle #ad - 7 degrees clearance angle. Conventional steel shank design for all insert shapes and in different angles. Insert geometries and grades for all materials. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Wiper geometries available for high feeds and excellent surface finish.

 

1212K SNR New Self Aligning Ball Bearing #ad

1212K SNR New Self Aligning Ball Bearing

1212K SNR New Self Aligning Ball Bearing #ad - Ansi number, smalr 1212k 3. Cutting direction, right hand. Self aligning ball bearing. Self aligning ball bearing. Self aligning ball bearing.

 

Sandvik Coromant General Turning Tool SMALR 1212K 3 - SMALR 1212K 3 #ad

Sandvik Coromant General Turning Tool, SMALR 1212K 3 – SMALR 1212K 3

Sandvik Coromant General Turning Tool, SMALR 1212K 3 – SMALR 1212K 3 #ad - 92″, cutting direction right hand, ansi number smalr 1212k 3, for use with maxr 3. Warning california residents this product can expose you to chemicals including styrene, which is known to the state of california to cause cancer and birth defects or other reproductive harm. General turning tool, overall length 4. California proposition 65 warning.

 

Sandvik Coromant SDACR 1212K 11-S Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width DCMT 3252 Insert Size 90 Degree Entering Angle #ad

Sandvik Coromant SDACR 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 3(2.5)2 Insert Size, 90 Degree Entering Angle

Sandvik Coromant SDACR 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 3(2.5)2 Insert Size, 90 Degree Entering Angle #ad - Conventional steel shank design for all insert shapes and in different angles. Wiper geometries available for high feeds and excellent surface finish. Insert geometries and grades for all materials. 7 degrees clearance angle. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components.

 

1212K NTN New Self Aligning Ball Bearing #ad

1212K NTN New Self Aligning Ball Bearing

1212K NTN New Self Aligning Ball Bearing #ad - This listing is for ( 1 ) 1212k, ntn, self -algning ballbearing, 60 mm id x 110 mm od x 22 mm w, tapered bore, open, extra small ball bearing, self -algning ball bearing, upc 4547359255577.

 

Sandvik Coromant SDNCN 1212K 11-S Turning Insert Holder Square Shank Steel External Screw Clamp Neutral 12mm Width x 12mm Height Shank 125mm Length x 62mm Width DCMT 3252 Insert Size #ad

Sandvik Coromant SDNCN 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 125mm Length x 6.2mm Width, DCMT 3(2.5)2 Insert Size

Sandvik Coromant SDNCN 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 125mm Length x 6.2mm Width, DCMT 3(2.5)2 Insert Size #ad - Insert geometries and grades for all materials. Conventional steel shank design for all insert shapes and in different angles. 7 degrees clearance angle. Wiper geometries available for high feeds and excellent surface finish. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components.

 

Sandvik Coromant SCLCL 1212K 06-S Turning Insert Holder Square Shank Steel External Screw Clamp Left Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width CCMT 2151 Insert Size #ad

Sandvik Coromant SCLCL 1212K 06-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 2(1.5)1 Insert Size

Sandvik Coromant SCLCL 1212K 06-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 2(1.5)1 Insert Size #ad - Insert geometries and grades for all materials. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Wiper geometries available for high feeds and excellent surface finish. 7 degrees clearance angle. Conventional steel shank design for all insert shapes and in different angles.

 

Sandvik Coromant SVVBN 1212K 11-S-B1 Turning Insert Holder Square Shank Steel External Screw Clamp Neutral 12mm Width x 12mm Height Shank 125mm Length x 63mm Width VBMT 221 Insert Size #ad

Sandvik Coromant SVVBN 1212K 11-S-B1 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 125mm Length x 6.3mm Width, VBMT 221 Insert Size

Sandvik Coromant SVVBN 1212K 11-S-B1 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 125mm Length x 6.3mm Width, VBMT 221 Insert Size #ad - Insert geometries and grades for all materials. Wiper geometries available for high feeds and excellent surface finish. 7 degrees clearance angle. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Conventional steel shank design for all insert shapes and in different angles.

 

1212K FAG New Self Aligning Ball Bearing #ad

1212K FAG New Self Aligning Ball Bearing

1212K FAG New Self Aligning Ball Bearing #ad - Self aligning ball bearing. Ansi number, smalr 1212k 3. Self aligning ball bearing. Self aligning ball bearing. Cutting direction, right hand.

 

Sandvik Coromant SMALL 1212K 3 Turning Insert Holder Square Shank Steel External Screw Clamp Left Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width MAxL 3 Insert Size #ad

Sandvik Coromant SMALL 1212K 3 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, MAxL 3. Insert Size

Sandvik Coromant SMALL 1212K 3 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, MAxL 3. Insert Size #ad - The extremely sharp cutting edges perform best at low feeds. Application geometries and grades for iso p, m, n, and s materials, parting-off in sliding head machines, precision grooving at low speeds and feeds. Corocut xs is a tangentially mounted system for precision machining in sliding head machines, available for external and internal parting, grooving, turning, backturning and threading applications. High precision, close tolerances, easy indexing, good accessibility when changing inserts, wide variety of insert widths, internal grooving at very small diameters. Sandvik coromant indexable insert holder is versatile small part machining system for external applications.

 

Sandvik Coromant SMALR 1212K 3-X Cut Off Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width MAxR 3 Insert Size #ad

Sandvik Coromant SMALR 1212K 3-X Cut Off Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, MAxR 3. Insert Size

Sandvik Coromant SMALR 1212K 3-X Cut Off Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, MAxR 3. Insert Size #ad - The extremely sharp cutting edges perform best at low feeds. Sandvik coromant indexable insert holder is versatile small part machining system for external applications. High precision, close tolerances, easy indexing, good accessibility when changing inserts, wide variety of insert widths, internal grooving at very small diameters. Application geometries and grades for iso p, m, n, and s materials, parting-off in sliding head machines, precision grooving at low speeds and feeds. Corocut xs is a tangentially mounted system for precision machining in sliding head machines, available for external and internal parting, grooving, turning, backturning and threading applications.

 

Sandvik Coromant SVJBR 1212K 11-S-B1 Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width VBMT 221 Insert Size 93 Degree Entering Angle #ad

Sandvik Coromant SVJBR 1212K 11-S-B1 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, VBMT 221 Insert Size, 93 Degree Entering Angle

Sandvik Coromant SVJBR 1212K 11-S-B1 Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, VBMT 221 Insert Size, 93 Degree Entering Angle #ad - Insert geometries and grades for all materials. 7 degrees clearance angle. Wiper geometries available for high feeds and excellent surface finish. Conventional steel shank design for all insert shapes and in different angles. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components.

 

Sandvik Coromant SVJBR 1212K 16-S Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width VBMT 332 Insert Size 93 Degree Entering Angle #ad

Sandvik Coromant SVJBR 1212K 16-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, VBMT 332 Insert Size, 93 Degree Entering Angle

Sandvik Coromant SVJBR 1212K 16-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, VBMT 332 Insert Size, 93 Degree Entering Angle #ad - Insert geometries and grades for all materials. 7 degrees clearance angle. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Conventional steel shank design for all insert shapes and in different angles. Wiper geometries available for high feeds and excellent surface finish.

 

Sandvik Coromant SCLCR 1212K 06-S Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width CCMT 2151 Insert Size 95 Degree Entering Angle #ad

Sandvik Coromant SCLCR 1212K 06-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 2(1.5)1 Insert Size, 95 Degree Entering Angle

Sandvik Coromant SCLCR 1212K 06-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 2(1.5)1 Insert Size, 95 Degree Entering Angle #ad - Insert geometries and grades for all materials. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. 7 degrees clearance angle. Conventional steel shank design for all insert shapes and in different angles. Wiper geometries available for high feeds and excellent surface finish.

 

1212K Steyr New Self Aligning Ball Bearing #ad

1212K Steyr New Self Aligning Ball Bearing

1212K Steyr New Self Aligning Ball Bearing #ad - Self aligning ball bearing. Cutting direction, right hand. Self aligning ball bearing. Ansi number, smalr 1212k 3. For use with, maxr 3.

 

Sandvik Coromant SDJCR 1212K 11-S Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width DCMT 3252 Insert Size 93 Degree Entering Angle #ad

Sandvik Coromant SDJCR 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 3(2.5)2 Insert Size, 93 Degree Entering Angle

Sandvik Coromant SDJCR 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 3(2.5)2 Insert Size, 93 Degree Entering Angle #ad - Wiper geometries available for high feeds and excellent surface finish. 7 degrees clearance angle. Conventional steel shank design for all insert shapes and in different angles. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Insert geometries and grades for all materials.

 

Sandvik Coromant SCLCL 1212K 09-S Turning Insert Holder Square Shank Steel External Screw Clamp Left Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width CCMT 3252 Insert Size 95 Degree Entering Angle #ad

Sandvik Coromant SCLCL 1212K 09-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 3(2.5)2 Insert Size, 95 Degree Entering Angle

Sandvik Coromant SCLCL 1212K 09-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 3(2.5)2 Insert Size, 95 Degree Entering Angle #ad - 7 degrees clearance angle. Wiper geometries available for high feeds and excellent surface finish. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Insert geometries and grades for all materials. Conventional steel shank design for all insert shapes and in different angles.

 

Sandvik Coromant SDACL 1212K 11-S Turning Insert Holder Square Shank Steel External Screw Clamp Left Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width DCMT 3252 Insert Size 90 Degree Entering Angle #ad

Sandvik Coromant SDACL 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 3(2.5)2 Insert Size, 90 Degree Entering Angle

Sandvik Coromant SDACL 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, DCMT 3(2.5)2 Insert Size, 90 Degree Entering Angle #ad - Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. 7 degrees clearance angle. Wiper geometries available for high feeds and excellent surface finish. Conventional steel shank design for all insert shapes and in different angles. Insert geometries and grades for all materials.

 

Sandvik Coromant STJCL 1212K 11-S Turning Insert Holder Square Shank Steel External Screw Clamp Left Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width TCMT 2151 Insert Size #ad

Sandvik Coromant STJCL 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, TCMT 2(1.5)1 Insert Size

Sandvik Coromant STJCL 1212K 11-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, TCMT 2(1.5)1 Insert Size #ad - Conventional steel shank design for all insert shapes and in different angles. Wiper geometries available for high feeds and excellent surface finish. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Insert geometries and grades for all materials. 7 degrees clearance angle.

 

Sandvik Coromant SCLCR 1212K 09-S Turning Insert Holder Square Shank Steel External Screw Clamp Right Hand 12mm Width x 12mm Height Shank 125mm Length x 12mm Width CCMT 3252 Insert Size 95 Degree Entering Angle #ad

Sandvik Coromant SCLCR 1212K 09-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 3(2.5)2 Insert Size, 95 Degree Entering Angle

Sandvik Coromant SCLCR 1212K 09-S Turning Insert Holder, Square Shank, Steel, External, Screw Clamp, Right Hand, 12mm Width x 12mm Height Shank, 125mm Length x 12mm Width, CCMT 3(2.5)2 Insert Size, 95 Degree Entering Angle #ad - Conventional steel shank design for all insert shapes and in different angles. 7 degrees clearance angle. Insert geometries and grades for all materials. Screw clamping uses positive single sided inserts and is the first choice for both internal and external longitudinal turning of long slender components. Wiper geometries available for high feeds and excellent surface finish.

 

1212K NonBranded4 New Self Aligning Ball Bearing #ad

1212K NonBranded4 New Self Aligning Ball Bearing

1212K NonBranded4 New Self Aligning Ball Bearing #ad - Drain to source voltage (vdss)-40v. Self aligning ball bearing. Packaging cut tape (ct). Fet type-2 n-channel (dual). Fet feature-standard.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.