Top 21 Best Kr Series

 

JW Winco 16N125T33KR Series GN 440 Carbon Steel Leveling Feet with Plastic Base Cap Zinc Plated and Blue Passivated Finish Metric Size 80mm Base Diameter M16 x 20 Thread Size 125mm Thread Length #ad

J.W. Winco 16N125T33/KR Series GN 440 Carbon Steel Leveling Feet with Plastic Base Cap, Zinc Plated and Blue Passivated Finish, Metric Size, 80mm Base Diameter, M16 x 2.0 Thread Size, 125mm Thread Length

J.W. Winco 16N125T33/KR Series GN 440 Carbon Steel Leveling Feet with Plastic Base Cap, Zinc Plated and Blue Passivated Finish, Metric Size, 80mm Base Diameter, M16 x 2.0 Thread Size, 125mm Thread Length #ad - The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. Gn 440 leveling feet are simple, economically priced components. The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).

 

JW Winco 4406-50-38-16-125-KR Series GN 4406 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap Inch Size 197 Base Diameter 38-16 Thread Size 492 Thread Length #ad

J.W. Winco 440.6-50-3/8-16-125-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Inch Size, 1.97″ Base Diameter, 3/8-16 Thread Size, 4.92″ Thread Length

J.W. Winco 440.6-50-3/8-16-125-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Inch Size, 1.97″ Base Diameter, 3/8-16 Thread Size, 4.92″ Thread Length #ad - The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. This will equal the pounds or load per leveling foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. 6 leveling feet are simple, economically priced components. Gn 440. The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).

 

SMC KR Series PBT Flame Resistant Push-to-Connect Tube Fitting 90 Degree Elbow with Sealant 38 Tube OD x 14 NPT Male Black #ad

SMC KR Series PBT Flame Resistant Push-to-Connect Tube Fitting, 90 Degree Elbow with Sealant, 3/8″ Tube OD x 1/4″ NPT Male, Black

SMC KR Series PBT Flame Resistant Push-to-Connect Tube Fitting, 90 Degree Elbow with Sealant, 3/8″ Tube OD x 1/4″ NPT Male, Black #ad - Operating temperature range of -5 to +60 degrees c. Push-to-connect mechanism provides reliable retaining force on tube. Joins 1/4″ npt male thread to 3/8″ od soft nylon tubing at a 90-degree angle. For use with low vacuum and pressure up to 145 psi. C3604 brass, stainless steel, pbt, and pom for flame-resistance to ul 94 v-0 standard.

 

JW Winco 4406-60-M10-100-KR Series GN 4406 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap Metric Size 60mm Base Diameter M10 x 15 Thread Size 100mm Thread Length #ad

J.W. Winco 440.6-60-M10-100-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Metric Size, 60mm Base Diameter, M10 x 1.5 Thread Size, 100mm Thread Length

J.W. Winco 440.6-60-M10-100-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Metric Size, 60mm Base Diameter, M10 x 1.5 Thread Size, 100mm Thread Length #ad - This will equal the pounds or load per leveling foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. Gn 440. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. 6 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The values given in the table assume a straight compressive load, perpendicular to the foot.

 

JW Winco 3436-60-M20-158-KR Series 3436 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap Metric Size M20 x 25 Thread Size 60mm Base Diameter 158mm Thread Length #ad

J.W. Winco 343.6-60-M20-158-KR Series 343.6 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap, Metric Size, M20 x 2.5 Thread Size, 60mm Base Diameter, 158mm Thread Length

J.W. Winco 343.6-60-M20-158-KR Series 343.6 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap, Metric Size, M20 x 2.5 Thread Size, 60mm Base Diameter, 158mm Thread Length #ad - The static load values in the table below refer to a net vertical load in relation to the ball socket. Under normal operating conditions, side loading or angular loading is not uncommon and the load capacity would be considerably reduced, which must be taken into consideration. The load values in the table apply only to versions without cup and with plastic cup. Mounts are supplied assembled. 6 leveling mounts is limited by the load capacity of the stud. The static load of gn 343.

 

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting Connector with Sealant 10mm Tube OD x 18 BSPT Male #ad

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 10mm Tube OD x 1/8″ BSPT Male

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 10mm Tube OD x 1/8″ BSPT Male #ad - Push-to-connect mechanism provides reliable retaining force on tube. Operating temperature range of -5 to +60 degrees c. For use with low vacuum and pressure up to 145 psi. Joins 1/8″ bspt male thread to 10 mm od soft nylon tubing. C3604 brass, stainless steel, pbt, and pom for flame-resistance to ul 94 v-0 standard.

 

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting Connector with Sealant 12 Tube OD x 12 NPT Male #ad

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 1/2″ Tube OD x 1/2″ NPT Male

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 1/2″ Tube OD x 1/2″ NPT Male #ad - Joins 1/2″ npt male thread to 1/2″ od soft nylon tubing. Push-to-connect mechanism provides reliable retaining force on tube. For use with low vacuum and pressure up to 145 psi. C3604 brass, stainless steel, pbt, and pom for flame-resistance to ul 94 v-0 standard. Operating temperature range of -5 to +60 degrees c.

 

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting Connector with Sealant 38 Tube OD x 38 NPT Male #ad

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 3/8″ Tube OD x 3/8″ NPT Male

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 3/8″ Tube OD x 3/8″ NPT Male #ad - C3604 brass, stainless steel, pbt, and pom for flame-resistance to ul 94 v-0 standard. For use with low vacuum and pressure up to 145 psi. Joins 3/8″ npt male thread to 3/8″ od soft nylon tubing. Push-to-connect mechanism provides reliable retaining force on tube. Operating temperature range of -5 to +60 degrees c.

 

JW Winco 16N150T33KR Series GN 440 Carbon Steel Leveling Feet with Plastic Base Cap Zinc Plated and Blue Passivated Finish Metric Size 80mm Base Diameter M16 x 20 Thread Size 150mm Thread Length #ad

J.W. Winco 16N150T33/KR Series GN 440 Carbon Steel Leveling Feet with Plastic Base Cap, Zinc Plated and Blue Passivated Finish, Metric Size, 80mm Base Diameter, M16 x 2.0 Thread Size, 150mm Thread Length

J.W. Winco 16N150T33/KR Series GN 440 Carbon Steel Leveling Feet with Plastic Base Cap, Zinc Plated and Blue Passivated Finish, Metric Size, 80mm Base Diameter, M16 x 2.0 Thread Size, 150mm Thread Length #ad - The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. Gn 440 leveling feet are simple, economically priced components. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

JW Winco 3436-50-M10-63-KR Series 3436 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap Metric Size M10 x 15 Thread Size 50mm Base Diameter 63mm Thread Length #ad

J.W. Winco 343.6-50-M10-63-KR Series 343.6 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap, Metric Size, M10 x 1.5 Thread Size, 50mm Base Diameter, 63mm Thread Length

J.W. Winco 343.6-50-M10-63-KR Series 343.6 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap, Metric Size, M10 x 1.5 Thread Size, 50mm Base Diameter, 63mm Thread Length #ad - The load values in the table apply only to versions without cup and with plastic cup. The static load of gn 343. The static load values in the table below refer to a net vertical load in relation to the ball socket. 6 leveling mounts is limited by the load capacity of the stud. Under normal operating conditions, side loading or angular loading is not uncommon and the load capacity would be considerably reduced, which must be taken into consideration. Mounts are supplied assembled.

 

JW Winco 4406-60-M10-60-KR Series GN 4406 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap Metric Size 60mm Base Diameter M10 x 15 Thread Size 60mm Thread Length #ad

J.W. Winco 440.6-60-M10-60-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Metric Size, 60mm Base Diameter, M10 x 1.5 Thread Size, 60mm Thread Length

J.W. Winco 440.6-60-M10-60-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Metric Size, 60mm Base Diameter, M10 x 1.5 Thread Size, 60mm Thread Length #ad - 6 leveling feet are simple, economically priced components. Gn 440. This will equal the pounds or load per leveling foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2).

 

JW Winco 6T125SA5KR Series GN 4405 Stainless Steel Leveling Feet with Plastic Base Cap Inch Size 38-16 Thread Size 157 Base Diameter 492 Thread Length #ad

J.W. Winco 6T125SA5/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Inch Size, 3/8-16 Thread Size, 1.57″ Base Diameter, 4.92 Thread Length

J.W. Winco 6T125SA5/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Inch Size, 3/8-16 Thread Size, 1.57″ Base Diameter, 4.92 Thread Length #ad - The values given in the table assume a straight compressive load, perpendicular to the foot. Gn 440. This will equal the pounds or load per leveling foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). To insure proper leveling mount size, divide the machine weight by the number of feet required. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. 5 leveling feet are simple, economically priced components.

 

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting Connector with Sealant 6mm Tube OD x 18 BSPT Male #ad

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 6mm Tube OD x 1/8″ BSPT Male

SMC KR Series Brass Flame Resistant Push-to-Connect Tube Fitting, Connector with Sealant, 6mm Tube OD x 1/8″ BSPT Male #ad - Joins 1/8″ bspt male thread to 6 mm od soft nylon tubing. Operating temperature range of -5 to +60 degrees c. C3604 brass, stainless steel, pbt, and pom for flame-resistance to ul 94 v-0 standard. For use with low vacuum and pressure up to 145 psi. Push-to-connect mechanism provides reliable retaining force on tube.

 

SMC KR Series PBT Flame Resistant Push-to-Connect Tube Fitting Plug-in Reducer 6mm x 8mm Tube OD Black #ad

SMC KR Series PBT Flame Resistant Push-to-Connect Tube Fitting, Plug-in Reducer, 6mm x 8mm Tube OD, Black

SMC KR Series PBT Flame Resistant Push-to-Connect Tube Fitting, Plug-in Reducer, 6mm x 8mm Tube OD, Black #ad - Operating temperature range of -5 to +60 degrees c. For use with low vacuum and pressure up to 145 psi. Push-to-connect mechanism provides reliable retaining force on tube. Meets ul 94 v-0 standard for flame resistance. Reducer joins 6 mm od soft nylon tubing to 8 mm smc kr series push-to-connect fitting.

 

JW Winco 8N50SA7KR Series GN 4405 Stainless Steel Leveling Feet with Plastic Base Cap Metric Size M8 x 125 Thread Size 60mm Base Diameter 50mm Thread Length #ad

J.W. Winco 8N50SA7/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Metric Size, M8 x 1.25 Thread Size, 60mm Base Diameter, 50mm Thread Length

J.W. Winco 8N50SA7/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Metric Size, M8 x 1.25 Thread Size, 60mm Base Diameter, 50mm Thread Length #ad - This will equal the pounds or load per leveling foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. Gn 440. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). 5 leveling feet are simple, economically priced components. The values given in the table assume a straight compressive load, perpendicular to the foot.

 

JW Winco 4406-50-12-13-150-KR Series GN 4406 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap Inch Size 197 Base Diameter 12-13 Thread Size 591 Thread Length #ad

J.W. Winco 440.6-50-1/2-13-150-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Inch Size, 1.97″ Base Diameter, 1/2-13 Thread Size, 5.91″ Thread Length

J.W. Winco 440.6-50-1/2-13-150-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Inch Size, 1.97″ Base Diameter, 1/2-13 Thread Size, 5.91″ Thread Length #ad - The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. The values given in the table assume a straight compressive load, perpendicular to the foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). 6 leveling feet are simple, economically priced components. Gn 440.

 

JW Winco 4406-80-M16-125-KR Series GN 4406 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap Metric Size 80mm Base Diameter M16 x 20 Thread Size 125mm Thread Length #ad

J.W. Winco 440.6-80-M16-125-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Metric Size, 80mm Base Diameter, M16 x 2.0 Thread Size, 125mm Thread Length

J.W. Winco 440.6-80-M16-125-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Metric Size, 80mm Base Diameter, M16 x 2.0 Thread Size, 125mm Thread Length #ad - The values given in the table assume a straight compressive load, perpendicular to the foot. This will equal the pounds or load per leveling foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). 6 leveling feet are simple, economically priced components. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. To insure proper leveling mount size, divide the machine weight by the number of feet required. Gn 440.

 

JW Winco 3436-32-M10-50-KR Series 3436 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap Metric Size M10 x 15 Thread Size 32mm Base Diameter 50mm Thread Length #ad

J.W. Winco 343.6-32-M10-50-KR Series 343.6 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap, Metric Size, M10 x 1.5 Thread Size, 32mm Base Diameter, 50mm Thread Length

J.W. Winco 343.6-32-M10-50-KR Series 343.6 303 Stainless Steel Threaded Stud Type Leveling Mount with Rubber Cap, Metric Size, M10 x 1.5 Thread Size, 32mm Base Diameter, 50mm Thread Length #ad - The static load values in the table below refer to a net vertical load in relation to the ball socket. 6 leveling mounts is limited by the load capacity of the stud. Under normal operating conditions, side loading or angular loading is not uncommon and the load capacity would be considerably reduced, which must be taken into consideration. The static load of gn 343. The load values in the table apply only to versions without cup and with plastic cup. Mounts are supplied assembled.

 

JW Winco 8N40SA8KR Series GN 4405 Stainless Steel Leveling Feet with Plastic Base Cap Metric Size M8 x 125 Thread Size 80mm Base Diameter 40mm Thread Length #ad

J.W. Winco 8N40SA8/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Metric Size, M8 x 1.25 Thread Size, 80mm Base Diameter, 40mm Thread Length

J.W. Winco 8N40SA8/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Metric Size, M8 x 1.25 Thread Size, 80mm Base Diameter, 40mm Thread Length #ad - This will equal the pounds or load per leveling foot. The values given in the table assume a straight compressive load, perpendicular to the foot. Gn 440. 5 leveling feet are simple, economically priced components. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). To insure proper leveling mount size, divide the machine weight by the number of feet required. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.

 

JW Winco 16N150SA8KR Series GN 4405 Stainless Steel Leveling Feet with Plastic Base Cap Metric Size M16 x 20 Thread Size 80mm Base Diameter 150mm Thread Length #ad

J.W. Winco 16N150SA8/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Metric Size, M16 x 2.0 Thread Size, 80mm Base Diameter, 150mm Thread Length

J.W. Winco 16N150SA8/KR Series GN 440.5 Stainless Steel Leveling Feet with Plastic Base Cap, Metric Size, M16 x 2.0 Thread Size, 80mm Base Diameter, 150mm Thread Length #ad - The values given in the table assume a straight compressive load, perpendicular to the foot. To insure proper leveling mount size, divide the machine weight by the number of feet required. This will equal the pounds or load per leveling foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly. 5 leveling feet are simple, economically priced components. Gn 440.

 

JW Winco 4406-60-58-11-150-KR Series GN 4406 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap Inch Size 236 Base Diameter 58-11 Thread Size 591 Thread Length #ad

J.W. Winco 440.6-60-5/8-11-150-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Inch Size, 2.36″ Base Diameter, 5/8-11 Thread Size, 5.91″ Thread Length

J.W. Winco 440.6-60-5/8-11-150-KR Series GN 440.6 Stainless Steel Leveling Feet with Fixing Lug and Black Plastic Base Cap, Inch Size, 2.36″ Base Diameter, 5/8-11 Thread Size, 5.91″ Thread Length #ad - To insure proper leveling mount size, divide the machine weight by the number of feet required. The values given in the table assume a straight compressive load, perpendicular to the foot. The static load rating of these feet is limited due to the acceptable load rating of the stud (tensile strength 500/mm2). 6 leveling feet are simple, economically priced components. Gn 440. This will equal the pounds or load per leveling foot. The bending and buckling stress factors often found in the actual application reduce the load rating of the stud, and must be compensated for accordingly.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.