Top 22 Zamacs

 

Chrome Plated Zamac Keeper for Restroom Partition Slide Latch 1-12 Between Holes Latch Opening is 1-916 High

Chrome Plated Zamac Keeper for Restroom Partition Slide Latch, 1-1/2″ Between Holes. Latch Opening is 1-9/16″ High

Chrome Plated Zamac Keeper for Restroom Partition Slide Latch, 1-1/2″ Between Holes. Latch Opening is 1-9/16″ High - Keeper for slide latch is 1-9/16″ high. Polished chrome plated zamac keeper for slide latch. Fits any size pilaster thickness. 1-1/2″ spacing between mounting holes, center to center.

 

Powers Fastening Innovations 02804 14-Inch by 3-Inch Mushroom Head Zamac Nailing with Carbon Steel Nail  100 Per Box

Powers Fastening Innovations 02804 1/4-Inch by 3-Inch Mushroom Head Zamac Nailing with Carbon Steel Nail , 100 Per Box

Powers Fastening Innovations 02804 1/4-Inch by 3-Inch Mushroom Head Zamac Nailing with Carbon Steel Nail , 100 Per Box - Powers is an iso-9001 international anchoring products company with extensive expertise in the following groups mechanical anchors, adhesive, light duty, roofing and carbide drill bits. Powers fasteners is the leading supplier of concrete and masonry anchors in north america and has been a leader in the fastening industry since 1921.

 

12 Powers Double Dual Shield Expansion Machine Bolt Anchors Zamac Alloy 25Bx

1/2″, Powers Double Dual Shield Expansion Machine Bolt Anchors, Zamac Alloy, 25/Bx

1/2″, Powers Double Dual Shield Expansion Machine Bolt Anchors, Zamac Alloy, 25/Bx - Mounting plate 3-1/4″ x 1-1/2″. For use on any door thickness. Slide latch measures 13/16″ x 2-3/16″ long.

 

14 x 3 Powers Zamac Hammer-Screw Nail Anchors Mushroom Head with No 2 Phillips Head Carbon Steel Screw 100Bx

1/4″ x 3″, Powers Zamac Hammer-Screw Nail Anchors, Mushroom Head with No. 2 Phillips Head Carbon Steel Screw, 100/Bx

1/4″ x 3″, Powers Zamac Hammer-Screw Nail Anchors, Mushroom Head with No. 2 Phillips Head Carbon Steel Screw, 100/Bx - The anchor is not recommended for overhead, life-safety, or sustained tensile loading applications unless special considerations are given to the allowable loads. With a body formed from corrosion resistant zamac alloy and a zinc plated carbon steel or perma-seal coated drive screw, this anchor has been developed as an improvement over standard nailin anchors. The zamac hammer-screw is a unique, one-step nail drive anchor featuring a phillips type head and screw thread for use in concrete, block, brick, or stone. It is available in 1/4″ diameter and lengths ranging from 3/4″ to 3″. The zamac hammer-screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nailin when installed in concrete.

 

14 x 1-12 Powers Zamac Hammer-Screw Nail Anchors Mushroom Head with No 2 Phillips Head Carbon Steel Screw 100Bx

1/4″ x 1-1/2″, Powers Zamac Hammer-Screw Nail Anchors, Mushroom Head with No. 2 Phillips Head Carbon Steel Screw, 100/Bx

1/4″ x 1-1/2″, Powers Zamac Hammer-Screw Nail Anchors, Mushroom Head with No. 2 Phillips Head Carbon Steel Screw, 100/Bx - The anchor is not recommended for overhead, life-safety, or sustained tensile loading applications unless special considerations are given to the allowable loads. The zamac hammer-screw is a unique, one-step nail drive anchor featuring a phillips type head and screw thread for use in concrete, block, brick, or stone. The zamac hammer-screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nailin when installed in concrete. It is available in 1/4″ diameter and lengths ranging from 3/4″ to 3″. With a body formed from corrosion resistant zamac alloy and a zinc plated carbon steel or perma-seal coated drive screw, this anchor has been developed as an improvement over standard nailin anchors.

 

Wej-It Nail-It DN3678 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 316 Diameter 78 Length Pack Of 100

Wej-It Nail-It DN3678 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 3/16″ Diameter, 7/8″ Length (Pack Of 100)

Wej-It Nail-It DN3678 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 3/16″ Diameter, 7/8″ Length (Pack Of 100) - Drive anchor provides a secure hold in concrete, block, brick, and stone. Ultimate tensile strength for a static load is 400 lb in 3,000-psi unreinforced stone aggregate concrete. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material. Meets fed spec gsa ffs-325 group v, type 2, class 2 specifications. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

 

MasterLock 3112E Lashing Strap with Zamac Plastic Buckle

MasterLock 3112E Lashing Strap with Zamac Plastic Buckle

MasterLock 3112E Lashing Strap with Zamac Plastic Buckle - Lashing straps made from ultra resistant monsterweave webbing and with all metal components featuring master lock’s exclusive silver protectant finish that provides a rich appearance and 3x more corrosion resistance.

 

Wej-It Nail-It DN1430 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 14 Diameter 3 Length Pack Of 100

Wej-It Nail-It DN1430 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 3″ Length (Pack Of 100)

Wej-It Nail-It DN1430 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 3″ Length (Pack Of 100) - Meets fed spec gsa ffs-325 group v, type 2, class 2 specifications. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material. Drive anchor provides a secure hold in concrete, block, brick, and stone. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Ultimate tensile strength for a static load is 800 lb in 3,000-psi unreinforced stone aggregate concrete.

 

Wej-It Nail-It DN1420 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 14 Diameter 2 Length Pack Of 100

Wej-It Nail-It DN1420 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 2″ Length (Pack Of 100)

Wej-It Nail-It DN1420 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 2″ Length (Pack Of 100) - Ultimate tensile strength for a static load is 800 lb in 3,000-psi unreinforced stone aggregate concrete. Drive anchor provides a secure hold in concrete, block, brick, and stone. Meets fed spec gsa ffs-325 group v, type 2, class 2 specifications. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.

 

Wej-It Nail-It DN1410 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 14 Diameter 1 Length Pack Of 100

Wej-It Nail-It DN1410 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 1″ Length (Pack Of 100)

Wej-It Nail-It DN1410 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 1″ Length (Pack Of 100) - Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material. Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Drive anchor provides a secure hold in concrete, block, brick, and stone. Meets fed spec gsa ffs-325 group v, type 2, class 2 specifications. Ultimate tensile strength for a static load is 800 lb in 3,000-psi unreinforced stone aggregate concrete.

 

Harris Hardware TP1916 Die Case Zamac U Bracket Chrome Plated

Harris Hardware TP1916 Die Case Zamac U Bracket, Chrome Plated

Harris Hardware TP1916 Die Case Zamac U Bracket, Chrome Plated - We have manufactured custom and specialty hardware to the toilet partition market since 1980. U bracket die case zamac chrome plated tp1916 1-inch panel thickness 1-5/16-inch bracket height 1-1/4-inch base length 1-1/4-inch base width. Today harris supplies many of the largest toilet partition manufacturers in the world. Harris hardware was founded in 1909 in brooklyn and has been a leading supplier for hardware to various specialty markets in the decades that followed.

 

Allfasteners 14 x 1 Zamac Mushroom Nail in on Hammer Drive Anchor 1ZHD14100 1000-Pack

Allfasteners 1/4″ x 1″ Zamac Mushroom Nail in on Hammer Drive Anchor 1ZHD14100 1000-Pack

Allfasteners 1/4″ x 1″ Zamac Mushroom Nail in on Hammer Drive Anchor 1ZHD14100 1000-Pack - They are shipped completely assembled and can be quickly hammered into place, allowing for fast on the job installation. If you have any questions or comments, do not hesitate to contact us. Zamac hammer drive anchors hammer drive anchors are medium duty anchors which can be used in concrete, block, brick and stone. The single head nail-like expander pin provides a permanent, tamper proof installation. At allfasteners, we strive to provide you with the best experience possible.

 

Wej-It MS38 Expansion Shield Anchor Zamac Alloy Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1 1-14 Length 38-16 Threads Pack Of 50

Wej-It MS38 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 1-1/4″ Length, 3/8″-16 Threads (Pack Of 50)

Wej-It MS38 Expansion Shield Anchor, Zamac Alloy, Meets A-A 1922A Type 1 and FFS-325C Group 1 Type 1 Class 1, 1-1/4″ Length, 3/8″-16 Threads (Pack Of 50) - Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete. Meets fed spec a-a 1922a type 1 and ffs-325c group 1, type 1, class 1. Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place. Holding power extends to uneven holes and soft material. Rust resistant material enables extended use.

 

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 14 Diameter 1-12 Length Pack Of 100

Wej-It Nail-It DN1412 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 1-1/2″ Length (Pack Of 100)

Wej-It Nail-It DN1412 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4″ Diameter, 1-1/2″ Length (Pack Of 100) - Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). Drive anchor provides a secure hold in concrete, block, brick, and stone. Meets fed spec gsa ffs-325 group v, type 2, class 2 specifications. Ultimate tensile strength for a static load is 800 lb in 3,000-psi unreinforced stone aggregate concrete. Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.

 

Stop And Keeper Zamac 175 In H

Stop And Keeper, Zamac, 1.75 In H

Stop And Keeper, Zamac, 1.75 In H - Minimal taper creates better visual. Can be mounted with s/m/s or through bolts. Durable zamac casting. Excellent for metal or plastic laminate partitions. Price for each item stop and keeper includes 2 each barrel nut #10 x 5/8″, 2 each step bolts 1 1/4″ for use on 1-1/4″ thick powder coated or stainless pilaster only material of construction zamac color/finish zamac/bright fastener type theft resistant used for locking metal doors height 1-3/4″ thickness 1-1/4″ width 2-1/2″ country of origin (subject to change) taiwan.

 

14 x 1-14 Powers Zamac Hammer-Screw Nail Anchors Mushroom Head with No 2 Phillips Head Carbon Steel Screw 100Bx

1/4″ x 1-1/4″, Powers Zamac Hammer-Screw Nail Anchors, Mushroom Head with No. 2 Phillips Head Carbon Steel Screw, 100/Bx

1/4″ x 1-1/4″, Powers Zamac Hammer-Screw Nail Anchors, Mushroom Head with No. 2 Phillips Head Carbon Steel Screw, 100/Bx - The zamac hammer-screw is a unique, one-step nail drive anchor featuring a phillips type head and screw thread for use in concrete, block, brick, or stone. With a body formed from corrosion resistant zamac alloy and a zinc plated carbon steel or perma-seal coated drive screw, this anchor has been developed as an improvement over standard nailin anchors. It is available in 1/4″ diameter and lengths ranging from 3/4″ to 3″. The zamac hammer-screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nailin when installed in concrete. The anchor is not recommended for overhead, life-safety, or sustained tensile loading applications unless special considerations are given to the allowable loads.

 

14 x 2 Powers Zamac Nailin Drive Pin Anchors with Stainless Steel Nail Mushroom Head 100Bx

1/4″ x 2″, Powers Zamac Nailin Drive Pin Anchors with Stainless Steel Nail, Mushroom Head, 100/Bx

1/4″ x 2″, Powers Zamac Nailin Drive Pin Anchors with Stainless Steel Nail, Mushroom Head, 100/Bx - The anchor is designed for use in a moist environment. The anchor is made from anchor body antimonial lead alloy/cone zamac alloy this anchor is designed for use in concrete, block, and brick. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. The designated size of the anchor refers to the inside diameter. The anchor requires a 3/8″ hole to be drilled in the base material (concrete, block, and brick) the hole should be drilled with carbide tipped bit that meets ansi standards and used in a hammer drill.

 

Chrome Plated Zamac Slide Latch For Restroom Partitions 2-34 Hole Spacing Surface Mount

Chrome Plated Zamac Slide Latch For Restroom Partitions, 2-3/4″ Hole Spacing, Surface Mount

Chrome Plated Zamac Slide Latch For Restroom Partitions, 2-3/4″ Hole Spacing, Surface Mount - Polished chrome plated zamac. Surface mounted slide latch. For use on any door thickness. 2-3/4″ spacing between holes, center to center. Latch is 3/4″h x 3-3/16″l.

 

Harris Hardware TP516171 Strike Keeper Die Cast Zamac Bracket Chrome Plated

Harris Hardware TP5161/71 Strike & Keeper Die Cast Zamac Bracket, Chrome Plated

Harris Hardware TP5161/71 Strike & Keeper Die Cast Zamac Bracket, Chrome Plated - Strike & keeper die cast zamac chrome plated tp5161/71 square or round edge partition all partition thickness. Today harris supplies many of the largest toilet partition manufacturers in the world. Harris hardware was founded in 1909 in brooklyn and has been a leading supplier for hardware to various specialty markets in the decades that followed. We have manufactured custom and specialty hardware to the toilet partition market since 1980.

 

ADA Chrome Plated Zamac Concealed Latch Set For Restroom Partitions For 1 Thick Door Fits In 1-14 Diameter Hole

ADA Chrome Plated Zamac Concealed Latch Set For Restroom Partitions, For 1″ Thick Door. Fits In 1-1/4″ Diameter Hole

ADA Chrome Plated Zamac Concealed Latch Set For Restroom Partitions, For 1″ Thick Door. Fits In 1-1/4″ Diameter Hole - Latches snap together. Ada concealed latch and knob for 1″ thick door. Fits in 1-1/4″ diameter hole. Polished chrome plated zamac.

 

Harris Hardware 732-PC Die Case Zamac Headrail Bracket Chrome Plated

Harris Hardware 732-PC Die Case Zamac Headrail Bracket, Chrome Plated

Harris Hardware 732-PC Die Case Zamac Headrail Bracket, Chrome Plated - We have manufactured custom and specialty hardware to the toilet partition market since 1980. Harris hardware was founded in 1909 in brooklyn and has been a leading supplier for hardware to various specialty markets in the decades that followed. Today harris supplies many of the largest toilet partition manufacturers in the world. Headrail bracket die case zamac chrome plated 732-pc for 1-inch wide headrails.

 

Chrome Plated Zamac Flat Strike Keeper For Slide Latch for Restroom Partition Door - For Inswing - 1-1932 Between Mounting Hole Centers

Chrome Plated Zamac Flat Strike & Keeper For Slide Latch for Restroom Partition Door – For Inswing – 1-19/32″ Between Mounting Hole Centers

Chrome Plated Zamac Flat Strike & Keeper For Slide Latch for Restroom Partition Door – For Inswing – 1-19/32″ Between Mounting Hole Centers - 1-9/16″ opening for slide latch. For any pilaster thickness.