Top 23 for Best Step Key Stock

 

Steel Step Key Stock For Gears Zinc Plated 716 Thickness 58 Width 12 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 7/16″ Thickness, 5/8″ Width, 1/2″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 7/16″ Thickness, 5/8″ Width, 1/2″ Base Width, 12″ Length (Pack of 1) #ad - The zinc plating provides corrosion resistance and a smooth, reflective appearance. The carbon steel key stock has a zinc-plated finish and a standard tolerance. It is magnetic. The carbon steel grade provides a good balance of toughness, strength, and machinability. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings.

 

Steel Step Key Stock For Gears Zinc Plated 14 Thickness 38 Width 14 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 1/4″ Thickness, 3/8″ Width, 1/4″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 1/4″ Thickness, 3/8″ Width, 1/4″ Base Width, 12″ Length (Pack of 1) #ad - The zinc plating provides corrosion resistance and a smooth, reflective appearance. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel grade provides a good balance of toughness, strength, and machinability. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The carbon steel key stock has a zinc-plated finish and a standard tolerance. It is magnetic.

 

Steel Step Key Stock For Shafts Zinc Plated 1332 Thickness 12 Width 716 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Shafts, Zinc Plated, 13/32″ Thickness, 1/2″ Width, 7/16″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Shafts, Zinc Plated, 13/32″ Thickness, 1/2″ Width, 7/16″ Base Width, 12″ Length (Pack of 1) #ad - The zinc plating provides corrosion resistance and a smooth, reflective appearance. The carbon steel key stock has a zinc-plated finish and a standard tolerance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. It is magnetic. The carbon steel grade provides a good balance of toughness, strength, and machinability.

 

Steel Step Key Stock For Gears Zinc Plated 316 Thickness 14 Width 316 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 3/16″ Thickness, 1/4″ Width, 3/16″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 3/16″ Thickness, 1/4″ Width, 3/16″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel grade provides a good balance of toughness, strength, and machinability. The zinc plating provides corrosion resistance and a smooth, reflective appearance. It is magnetic. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel key stock has a zinc-plated finish and a standard tolerance.

 

12 Inch Long Zinc Plated Step Key Stock for Gears #ad

12 Inch Long Zinc Plated Step Key Stock for Gears

12 Inch Long Zinc Plated Step Key Stock for Gears #ad - 3/8 inch high base, 3/4 inch wide base, 7/16 inch high extention, 7/8 inch wide extention, tool steel. Extension width (inch) 7/8. Extension height (inch) 7/16. Finish/coating zinc-plated. Length (inch) 12.

 

Steel Step Key Stock For Gears Zinc Plated 1316 Thickness 78 Width 34 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 13/16″ Thickness, 7/8″ Width, 3/4″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 13/16″ Thickness, 7/8″ Width, 3/4″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel key stock has a zinc-plated finish and a standard tolerance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The zinc plating provides corrosion resistance and a smooth, reflective appearance. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. It is magnetic. The carbon steel grade provides a good balance of toughness, strength, and machinability.

 

Steel Step Key Stock For Shafts Zinc Plated 58 Thickness 34 Width 12 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Shafts, Zinc Plated, 5/8″ Thickness, 3/4″ Width, 1/2″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Shafts, Zinc Plated, 5/8″ Thickness, 3/4″ Width, 1/2″ Base Width, 12″ Length (Pack of 1) #ad - Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The zinc plating provides corrosion resistance and a smooth, reflective appearance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The carbon steel grade provides a good balance of toughness, strength, and machinability. The carbon steel key stock has a zinc-plated finish and a standard tolerance. It is magnetic.

 

Steel Step Key Stock For Shafts Zinc Plated 516 Thickness 38 Width 516 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Shafts, Zinc Plated, 5/16″ Thickness, 3/8″ Width, 5/16″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Shafts, Zinc Plated, 5/16″ Thickness, 3/8″ Width, 5/16″ Base Width, 12″ Length (Pack of 1) #ad - Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel grade provides a good balance of toughness, strength, and machinability. It is magnetic. The carbon steel key stock has a zinc-plated finish and a standard tolerance. The zinc plating provides corrosion resistance and a smooth, reflective appearance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings.

 

12 Inch Long Zinc Plated Step Key Stock for Shafts #ad

12 Inch Long Zinc Plated Step Key Stock for Shafts

12 Inch Long Zinc Plated Step Key Stock for Shafts #ad - Finish/coating zinc-plated. Length (inch) 12. Extension width (inch) 5/16. Extension height (inch) 1/8. 3/16 inch high base, 3/8 inch wide base, 1/8 inch high extention, 5/16 inch wide extention, tool steel.

 

Steel Step Key Stock For Gears Zinc Plated 916 Thickness 58 Width 12 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 9/16″ Thickness, 5/8″ Width, 1/2″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 9/16″ Thickness, 5/8″ Width, 1/2″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel key stock has a zinc-plated finish and a standard tolerance. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The zinc plating provides corrosion resistance and a smooth, reflective appearance. It is magnetic. The carbon steel grade provides a good balance of toughness, strength, and machinability.

 

Steel Step Key Stock For Shafts Zinc Plated 1132 Thickness 38 Width 516 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Shafts, Zinc Plated, 11/32″ Thickness, 3/8″ Width, 5/16″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Shafts, Zinc Plated, 11/32″ Thickness, 3/8″ Width, 5/16″ Base Width, 12″ Length (Pack of 1) #ad - The zinc plating provides corrosion resistance and a smooth, reflective appearance. It is magnetic. The carbon steel grade provides a good balance of toughness, strength, and machinability. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel key stock has a zinc-plated finish and a standard tolerance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings.

 

12 Inch Long Zinc Plated Step Key Stock for Shafts #ad

12 Inch Long Zinc Plated Step Key Stock for Shafts

12 Inch Long Zinc Plated Step Key Stock for Shafts #ad - Finish/coating zinc-plated. Extension width (inch) 7/8. Extension height (inch) 7/16. 1/2 inch high base, 1 inch wide base, 7/16 inch high extention, 7/8 inch wide extention, tool steel. Length (inch) 12.

 

Steel Step Key Stock For Shafts Zinc Plated 1116 Thickness 34 Width 58 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Shafts, Zinc Plated, 11/16″ Thickness, 3/4″ Width, 5/8″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Shafts, Zinc Plated, 11/16″ Thickness, 3/4″ Width, 5/8″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel grade provides a good balance of toughness, strength, and machinability. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The carbon steel key stock has a zinc-plated finish and a standard tolerance. It is magnetic. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The zinc plating provides corrosion resistance and a smooth, reflective appearance.

 

Steel Step Key Stock For Gears Zinc Plated 1116 Thickness 1516 Width 34 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 11/16″ Thickness, 15/16″ Width, 3/4″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 11/16″ Thickness, 15/16″ Width, 3/4″ Base Width, 12″ Length (Pack of 1) #ad - Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The zinc plating provides corrosion resistance and a smooth, reflective appearance. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel key stock has a zinc-plated finish and a standard tolerance. The carbon steel grade provides a good balance of toughness, strength, and machinability. It is magnetic.

 

Steel Step Key Stock For Gears Zinc Plated 2132 Thickness 1316 Width 34 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 21/32″ Thickness, 13/16″ Width, 3/4″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 21/32″ Thickness, 13/16″ Width, 3/4″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel key stock has a zinc-plated finish and a standard tolerance. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel grade provides a good balance of toughness, strength, and machinability. The zinc plating provides corrosion resistance and a smooth, reflective appearance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. It is magnetic.

 

Steel Step Key Stock For Gears Zinc Plated 1132 Thickness 716 Width 38 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 11/32″ Thickness, 7/16″ Width, 3/8″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 11/32″ Thickness, 7/16″ Width, 3/8″ Base Width, 12″ Length (Pack of 1) #ad - Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel grade provides a good balance of toughness, strength, and machinability. It is magnetic. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The carbon steel key stock has a zinc-plated finish and a standard tolerance. The zinc plating provides corrosion resistance and a smooth, reflective appearance.

 

Key Stock Step 12 In L #ad

Key Stock, Step, 12 In L

Key Stock, Step, 12 In L #ad - Lower step height (in) 3/32″ top step height (in) 3/32″ country of origin (subject to change) united states. Price for each length tolerance -0125″ rockwell hardness b85 finish zinc item step key stock length 12″ material medium carbon steel tensile strength (psi) 64, 000 psi dimension b 3/32″ type 2 top width (in) 3/16″ bottom width (in) 1/4″ application for mismarked keyways, gears, shafts dimension d 3/32″ dimension c 1/4″ dimension a 3/16″.

 

12 Inch Long Zinc Plated Step Key Stock for Gears #ad

12 Inch Long Zinc Plated Step Key Stock for Gears

12 Inch Long Zinc Plated Step Key Stock for Gears #ad - Extension height (inch) 1/4. 3/16 inch high base, 3/8 inch wide base, 1/4 inch high extention, 1/2 inch wide extention, tool steel. Finish/coating zinc-plated. Length (inch) 12. Extension width (inch) 1/2.

 

12 Inch Long Zinc Plated Step Key Stock for Shafts #ad

12 Inch Long Zinc Plated Step Key Stock for Shafts

12 Inch Long Zinc Plated Step Key Stock for Shafts #ad - 5/16 inch high base, 5/8 inch wide base, 3/16 inch high extention, 3/8 inch wide extention, tool steel. Extension height (inch) 3/16. Length (inch) 12. Extension width (inch) 3/8. Finish/coating zinc-plated.

 

12 Inch Long Zinc Plated Step Key Stock for Gears #ad

12 Inch Long Zinc Plated Step Key Stock for Gears

12 Inch Long Zinc Plated Step Key Stock for Gears #ad - Extension height (inch) 3/16. Extension width (inch) 5/8. 1/4 inch high base, 1/2 inch wide base, 3/16 inch high extention, 5/8 inch wide extention, tool steel. Finish/coating zinc-plated. Length (inch) 12.

 

Steel Step Key Stock For Gears Zinc Plated 38 Thickness 12 Width 38 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 3/8″ Thickness, 1/2″ Width, 3/8″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 3/8″ Thickness, 1/2″ Width, 3/8″ Base Width, 12″ Length (Pack of 1) #ad - Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The carbon steel grade provides a good balance of toughness, strength, and machinability. The zinc plating provides corrosion resistance and a smooth, reflective appearance. The carbon steel key stock has a zinc-plated finish and a standard tolerance. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. It is magnetic.

 

Steel Step Key Stock For Gears Zinc Plated 78 Thickness 1 Width 34 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 7/8″ Thickness, 1″ Width, 3/4″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 7/8″ Thickness, 1″ Width, 3/4″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel key stock has a zinc-plated finish and a standard tolerance. The carbon steel grade provides a good balance of toughness, strength, and machinability. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. The zinc plating provides corrosion resistance and a smooth, reflective appearance. It is magnetic. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways.

 

Steel Step Key Stock For Gears Zinc Plated 716 Thickness 12 Width 38 Base Width 12 Length Pack of 1 #ad

Steel Step Key Stock For Gears, Zinc Plated, 7/16″ Thickness, 1/2″ Width, 3/8″ Base Width, 12″ Length (Pack of 1)

Steel Step Key Stock For Gears, Zinc Plated, 7/16″ Thickness, 1/2″ Width, 3/8″ Base Width, 12″ Length (Pack of 1) #ad - The carbon steel key stock has a zinc-plated finish and a standard tolerance. It is magnetic. The zinc plating provides corrosion resistance and a smooth, reflective appearance. Key stock is used to make a machinery part known as a machine key, which fits into a mating keyway to transmit torque between shafts and hubs or bushings. Rectangular and square key stock shapes are the most common, while step key stock is used for damaged or inconsistent keyways. The carbon steel grade provides a good balance of toughness, strength, and machinability.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.