Top 24 Fluke Networks

 

Fluke Networks 11230002 Round Cable Stripper

Fluke Networks 11230002 Round Cable Stripper

Fluke Networks 11230002 Round Cable Stripper - Used for utp/stp telephone and data cables, and other round cables. Cable stripper cuts and strips round cables used in telephone and cable installations. Adjustable blade depth to score without damaging the shielding and conductors. Finger loop provides a secure hold.

 

Fluke Networks 10051501 D914 Impact Punch Down Tool with EverSharp 66110 Plus Screwdriver Blade

Fluke Networks 10051501 D914 Impact Punch Down Tool with EverSharp 66/110 Plus Screwdriver Blade

Fluke Networks 10051501 D914 Impact Punch Down Tool with EverSharp 66/110 Plus Screwdriver Blade - Lifetime warranty. Hook & spudger tools and blade storage are built into the handle. For replacement blades search ‘fluke networks 10056000′. Adapter blade allows technician to use a variety of torque tool bits and sockets easy blade insertion, locks in place. Includes screwdriver blade, 110 and 66 eversharp blades for termination into 110 and 66 wiring blocks. Automatic spring handle–choose low impact for 24/26-gauge wire or high impact for 22-gauge wire.

 

Fluke Networks FI-7000 Fiber Inspector Pro FI-7000 120

Fluke Networks FI-7000 Fiber Inspector Pro (FI-7000 120)

Fluke Networks FI-7000 Fiber Inspector Pro (FI-7000 120) - This fiber optic inspection scope provides automated pass/fail certification and takes the guess work out of fiber inspection so anyone can be a fiber expert. Furthermore, mating contaminated fiber optic connectors can cause permanent damage as microscopic debris is crushed between end-faces in physical contact. Dirt and contaminant cause insertion loss and back-reflection that inhibits optical transmission and causes havoc with transceivers. The fi-7000 fiber inspector pro is a fiber optic inspection scope that allows you to inspect and certify fiber optic connector end-faces in 2 seconds so you can get the job done the first time. Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one fiber optic connector end-face to another upon mating, both sides of any connection must always be cleaned and inspected. Avoiding this common cause of failure, starts with inspecting the fiber optic connector end-face and eliminating any contamination before insertion into a bulkhead or piece of equipment. Fiber loss and otdr testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate. Even factory terminated patch cords or pigtails must be inspected as protective caps do not keep fiber optic connector end-faces clean. Fiber optic connector end-face contamination is a leading cause of fiber failures.

 

Fluke Networks Cableiq Advanced It Kit

Fluke Networks Cableiq Advanced It Kit

Fluke Networks Cableiq Advanced It Kit - Telephone test set detects dial tone and polarity, places and receives calls, indicates line voltage and current, verifies call waiting service, and has a speakerphone for hands-free conversation. Fluke networks cableiq advanced it kit. Tdr measures cable length and locates faults on twisted pair and coaxial cable as well as parallel conductors, and analog tone generator has five distinct cadences for isolating individual wire pairs. Available with various line cord connectors to suit specific applications. High-visibility glow-in-the-dark keypad with standard dialing keys and function keys, plus a backlit lcd for tracking functions and test status.

 

Fluke Networks FI-500 Fiber Optic Inspection Camera

Fluke Networks FI-500 Fiber Optic Inspection Camera

Fluke Networks FI-500 Fiber Optic Inspection Camera - Use in dark patch panels with portbright illumination built into the probe. Auto-focus instead of a traditional manual focus ring that is difficult to hold and adjust. Includes 4 upc tips (125, 250, lc and sc) and a case apc, arinc 801, and other tips available. The fi-500 includes handheld color display, auto-focus inspection scope and 4 upc tips (lc, sc, 125mm, 250mm) includes port brighttm to illuminate and easily connect in dark places. Small probe gets into tight patch panels. High resolution end face images on a large screen. Magnetic strap attachment allows technicians to keep their hand’s free and their tester safe from potential drops and accidents with its strong rare earth magnet.

 

Fluke Networks Need L Lock Pliers

Fluke Networks Need L Lock Pliers

Fluke Networks Need L Lock Pliers - Jaws are grooved to provide a better grip on wires. Ur/uy/ug connector crimper. Built-in cutter and wire stripper. Rubber coated handles for a non-slip grip. Needle-nose crimping pliers. Wire stripper hole for 22- to 24-gauge wire. Rubber coated handles for non-slip grip. Combines a ur/uy/ug connector crimper with needle-nose pliers. Aligned crimping jaws come down square to ensure a solid connection. Built-in side cutter.

 

Fluke Networks TS54-BANA Premium Voice Data and Video Telephone Test Set with TDR Extra-Large Alligator Clips and Test Probe 4mm Banana

Fluke Networks TS54-BANA Premium Voice Data and Video Telephone Test Set with TDR, Extra-Large Alligator Clips and Test Probe, 4mm Banana

Fluke Networks TS54-BANA Premium Voice Data and Video Telephone Test Set with TDR, Extra-Large Alligator Clips and Test Probe, 4mm Banana - High-visibility glow-in-the-dark keypad with standard dialing keys and function keys, plus a backlit lcd for tracking functions and test status. Incorporates a tdr, tone generator, and telephone test set for testing vdv cabling as well as pots quality on live dsl lines without disrupting data services. Available with various line cord connectors to suit specific applications. Telephone test set detects dial tone and polarity, places and receives calls, indicates line voltage and current, verifies call waiting service, and has a speakerphone for hands-free conversation. Tdr measures cable length and locates faults on twisted pair and coaxial cable as well as parallel conductors, and analog tone generator has five distinct cadences for isolating individual wire pairs.

 

Fluke Networks DTX-1800-MSO 120-GLD DTX-1800 Kit with DTX-MFM2 Multimode DTX-SFM2 Single-mode Fiber Modules DTX-OTDR-QMOD Compact OTDR Module and 1 Yr of Gold Support

Fluke Networks DTX-1800-MSO 120-GLD DTX-1800 Kit with DTX-MFM2 Multimode & DTX-SFM2 Single-mode Fiber Modules, & DTX-OTDR-QMOD Compact OTDR Module and 1 Yr. of Gold Support

Fluke Networks DTX-1800-MSO 120-GLD DTX-1800 Kit with DTX-MFM2 Multimode & DTX-SFM2 Single-mode Fiber Modules, & DTX-OTDR-QMOD Compact OTDR Module and 1 Yr. of Gold Support - Performs level iv accuracy tests at bandwidths up to 900mhz that comply with industry standards including tia, iso/iec, en, ansi, and ieee. Performs category 6 autotest in 9 seconds and tests shielded and unshielded twisted pair lan cabling (stp, ftp, sstp, and utp), category 6a/class ea permanent link adapters, and category 6/class e channel adapters. Copper and fiber optic cable certification test set with dtx-1800 cable analyzer, dtx-mfm2 multimode and dtx-sfm2 single-mode fiber modules, and dtx-otdr-qmod compact odtr modules performs extended certification of high-speed networks to iso level iv and tia level iiie accuracy. Stores up to 250 qualification test results and downloads results to a computer for analysis and generation of network certification reports. Includes dtx-1800 cable analyzer, smart remote, one set each of dtx series 2 multimode fiber module (dtx-mfm2), single-mode fiber module (dtx-sfm2), and dtx compact otdr module (dtx-otdr-qmod), and instructions for activating one year of fluke networks’ gold support, which covers repairs, calibration, and technical support.

 

Fluke Networks 4285109 Model DSX-5000 120 Cable Analyzer Module Set of CAT 6AClass EA Permanent Link Adaptors

Fluke Networks 4285109 Model DSX-5000 120 Cable Analyzer Module, Set of CAT 6A/Class EA Permanent Link Adaptors

Fluke Networks 4285109 Model DSX-5000 120 Cable Analyzer Module, Set of CAT 6A/Class EA Permanent Link Adaptors - The dsx reduces the time required to fix cabling faults with dedicated diagnostics, a simple test that locates the problem. Linkware management software provides unmatched analysis of test results and professional test reports. Versiv enables users to accomplish more than ever with a cable tester, by accelerating every step of the testing process. Projx management system eases tasks from initial set-up of a job to system acceptance it eliminates redundant steps, and ensures that all tests are completed correctly the first time, and every time. Taptive user interface puts advanced data analysis and easy set-up and operation at the fingertips of technicians of all skill levels.

 

Fluke Networks DTX-ACNA North American AC Charger for DTX CableAnalyzer Series

Fluke Networks DTX-ACNA North American AC Charger for DTX CableAnalyzer Series

Fluke Networks DTX-ACNA North American AC Charger for DTX CableAnalyzer Series - Fluke networks ac charger, north american, for dtx cableanalyzer series.

 

Fluke Networks CIQ-IDK24 Remote Identifier Kit for CableIQ Network Cable Tester

Fluke Networks CIQ-IDK24 Remote Identifier Kit for CableIQ Network Cable Tester

Fluke Networks CIQ-IDK24 Remote Identifier Kit for CableIQ Network Cable Tester - Provides for full wiremap testing on twisted pair cabling. Compatible with f-connector (coax) and modular jack (rj). Provides easier identification of twisted pair and coaxial connections. For use with the fluke networks cableiq qualification tester.

 

Fluke Networks FOS-100-S Fiber One-Shot Pro Kit Single Mode Fault Finder

Fluke Networks FOS-100-S Fiber One-Shot Pro Kit, Single Mode Fault Finder

Fluke Networks FOS-100-S Fiber One-Shot Pro Kit, Single Mode Fault Finder - Key information visible on a large display power loss in db and distance in meters or feet. Find problems quickly six-second test time-no more blind troubleshooting that can waste hours. Measure 23,000 meters / 15 miles feet of fiber optic cable, 9/125µm at 1550nm output wavelength compatible with standard pon wavelengths 1310, 1490, 1550 and 1625 nm. Quick set-up connect your fiber and press the test button no lengthy set-up necessary. Removable sc adapter is easily cleaned optional lc, st and ft interchangeable adapters are available.

 

Fluke Networks JR-SYS-2-H JackRapid Replacement Blade Head for Systimax MGS400 MGS600 MFP420 MFP520

Fluke Networks JR-SYS-2-H JackRapid Replacement Blade Head for Systimax MGS400, MGS600, MFP420, MFP520

Fluke Networks JR-SYS-2-H JackRapid Replacement Blade Head for Systimax MGS400, MGS600, MFP420, MFP520 - Supports systimax jack models mgs400 cat 6, mgs500 cat 6, mfp420 cat 6, mfp520 cat 6a. Supports systimax jack models mgs400 cat 6, mgs600 cat 6a, mfp420 cat 6, mfp520 cat 6a. Compatible with fluke networks jr-ergohandle jackrapid ergonomic handle (sold separately).

 

Fluke Networks 44600000 Insulated Pocket Probe Pic Tool with Cap 105 Degrees Angle

Fluke Networks 44600000 Insulated Pocket Probe Pic Tool with Cap, 105 Degrees Angle

Fluke Networks 44600000 Insulated Pocket Probe Pic Tool with Cap, 105 Degrees Angle - Its compact size also makes it perfect for using the pic end for tracing or pulling wires from a bunch. Fluke networks’ handy, pocket-sized insulation probe is ideal for checking for loose or damaged connections or to spread apart wires for direct access.

 

Fluke Networks 11292000 Pro-Tool Kit IS50 with Punch Down Tool

Fluke Networks 11292000 Pro-Tool Kit IS50 with Punch Down Tool

Fluke Networks 11292000 Pro-Tool Kit IS50 with Punch Down Tool - Cut and strip wire more cleanly and quickly with the electricians’ d-snipstm. D914s industry standard punchdown tool makes for solid terminations, reduces hand fatigue and includes a built-in hook & spudger. Kit includes ergonomically designed dur-a-grip pouch for convenient tool storage on belt. Easy-to-use cable stripper quickly rings and slits many types of cable.

 

Fluke Networks NFK2-SMPLX-LC Simplex Multimode Test Reference Cords for LC Adapter 50 µm 1 m Cable Length Set of 2 SCLC LCLC

Fluke Networks NFK2-SMPLX-LC Simplex Multimode Test Reference Cords for LC Adapter, 50 µm, 1 m Cable Length (Set of 2), (SC/LC, LC/LC)

Fluke Networks NFK2-SMPLX-LC Simplex Multimode Test Reference Cords for LC Adapter, 50 µm, 1 m Cable Length (Set of 2), (SC/LC, LC/LC) - Made in the usa. Test reference cords designed to exceed the ease of use, durability and optical quality of generic off-the-shelf patch cords. A duplex multimode three-jumper test reference cord for use with fluke networks fiber installation testing devices, such as the dtx cableanalyzer (sold separately). Includes a 50 µm mandrel. 1 x sc/lc , 1 x lc/lc.

 

Fluke Networks Lithium Ion Battery 4DTX Series DTX-LION

Fluke Networks Lithium Ion Battery 4DTX Series (DTX-LION)

Fluke Networks Lithium Ion Battery 4DTX Series (DTX-LION) - Main unit and remote lithium-ion battery pack, 74 v, 4000 mah. Compatible with all dtx cableanalyzer series models.

 

Fluke Networks P3218RJ9 Line Cord with Angled Bed-of-Nails Piercing Pin Clips and RJ-11 plug Compatible with TS22A TS25D Telephone Test Sets

Fluke Networks P3218RJ9 Line Cord with Angled Bed-of-Nails, Piercing Pin Clips and RJ-11 plug, Compatible with TS22(A) & TS25D Telephone Test Sets

Fluke Networks P3218RJ9 Line Cord with Angled Bed-of-Nails, Piercing Pin Clips and RJ-11 plug, Compatible with TS22(A) & TS25D Telephone Test Sets - Rj-11 plug for plugging into an rj jack, where available. Field replaceable line cord with angled bed-of-nails clips, piercing pin and rj-11 plug, for use with lineman’s hand-held test set for testing insulated telephone wires. Compatible with fluke networks ts22, ts22a & ts25d test sets (sold separately). Bed-of-nails clips for piercing wire insulation, where necessary. Braided cables for durability and insulating boots over clips for safety.

 

Fluke Networks 11293400 Dur-A-Grip Pouch for Pro-Tool Kit IS60

Fluke Networks 11293400 Dur-A-Grip Pouch for Pro-Tool Kit IS60

Fluke Networks 11293400 Dur-A-Grip Pouch for Pro-Tool Kit IS60 - Fluke networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The fluke networks 11293400 dur-a-grip pouch is a sleek, form-fitting tool pouch that securely holds — even upside down — the most essential tools for electrical and telecom technicians. The company, which operates globally, is based in everett, wa.

 

Fluke Networks MT-8200-49A Cable Tester

Fluke Networks MT-8200-49A Cable Tester

Fluke Networks MT-8200-49A Cable Tester - Testing of twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs. Remote identifier enables one-person testing. Cable tester for simple verification of wiremaps and identification of faults with leds. Easy-to-read fault display on cable tester. Tone generator for tracing installed cables hidden in walls, floors and ceilings.

 

Fluke Networks Electrical Contractor Telecom Kit II with Pro3000 Analog Tone and Probe Kit and Case

Fluke Networks Electrical Contractor Telecom Kit II with Pro3000 Analog Tone and Probe Kit and Case

Fluke Networks Electrical Contractor Telecom Kit II with Pro3000 Analog Tone and Probe Kit and Case - Kit includes a punch-down, cut blade, cable stripper, probe pic, and d-snips for separating, cutting, and terminating wiring, and a standard 4-wire modular adapter for connecting to telephone jacks. Abn clips allow access to individual wire pairs and rj11 plug connects to telephone jacks. Pro3000 analog tone generator and probe plus accessories for testing, troubleshooting, and terminating wiring in telephone and data lines. Sends a loud tone up to 16km (10 miles) in most cables and provides five distinct cadences for isolating individual wire pairs. Tone generator and probe locate and trace cables, wires, and wire pairs, and check continuity and polarity on inactive networks.

 

Fluke Networks FTK1475 Single and Multimode Fiber Power Meter Inspect and Cleaning

Fluke Networks FTK1475 Single and Multimode Fiber Power Meter, Inspect and Cleaning

Fluke Networks FTK1475 Single and Multimode Fiber Power Meter, Inspect and Cleaning - Visifault vfl uses a bright red laser to trace fibers, checks continuity and polarity, and help find breaks in multimode and single mode fiber. Fiber optic cable test kit with simplifier pro meter, single and multimode light sources, and other tools for verification and inspection of cabling in multimode and single mode fiber networks. Fiber optic light sources simultaneously transmits 850/1300 nm multimode wavelengths and the single mode source transmits 1310/1550 nm. Simplifies pro optical power meter with single and multimode light sources measures optical power and loss transmits 850/1300 nm multimode wavelengths and 1310/ 1550 single mode wavelengths. The fi-500 includes handheld color display, auto-focus inspection scope and 4 upc tips (lc, sc, 125mm, 250mm) includes port bright to illuminate and easily connect in dark places. Magnetic strap attachment allows technicians to keep their hand’s free and their tester safe from potential drops and accidents with its strong rare earth magnet.

 

Fluke Networks P4480008 TS524442 Replacement Line Cord with Angled Bed-of-Nails Clips Only Compatible with 52 and 40 Series Test Sets

Fluke Networks P4480008 TS52/44/42 Replacement Line Cord with Angled Bed-of-Nails Clips Only, Compatible with 52 and 40 Series Test Sets

Fluke Networks P4480008 TS52/44/42 Replacement Line Cord with Angled Bed-of-Nails Clips Only, Compatible with 52 and 40 Series Test Sets - Replacement line cord with abn clips for the fluke networks ts40 and ts52 series test setsfluke networks manufactures tools for network infrastructure installation, testing, certification, and troubleshooting, in copper, fiber, and wireless networks, with its tools widely used by contractors, enterprises, and communication service providers. The company, which operates globally, is based in everett, wa.

 

Fluke Networks 26500090 TS90 Cable Fault Finder with BNC to Alligator Clips

Fluke Networks 26500090 TS90 Cable Fault Finder with BNC to Alligator Clips

Fluke Networks 26500090 TS90 Cable Fault Finder with BNC to Alligator Clips - Fault finder with tone generator locates open and short circuits, measures cable length, helps isolate individual wire pairs, and detects ac voltage on the line. Works on any two or more conductor cable up to 2,500 feet (762 meters). Patented smarttone analog tone generator with five distinct cadences for isolating individual wire pairs. Four-digit led display for viewing readings. Vop (velocity of propagation) can be set to match a cable’s specifications to optimize the accuracy of fault location and cable length measurement.