Top 25 Best Shank 1s

 

IVY Classic 39093 Drill Arbor Adapter Adapts 12-Inch Arbor Hole to 14-Inch Shank 1Card

IVY Classic 39093 Drill Arbor Adapter, Adapts 1/2-Inch Arbor Hole to 1/4-Inch Shank, 1/Card

IVY Classic 39093 Drill Arbor Adapter, Adapts 1/2-Inch Arbor Hole to 1/4-Inch Shank, 1/Card - These arbor adapters are zinc-plated and feature alloy-steel construction. Ivy classic drill arbor adapters adapt 1/2-inch arbor holes to fit a 1/4-inch arbor shank. Ivy classic industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools.

 

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 12 Shank 1 Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 1″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit

EnPoint Woodworking Table Top Surface Planing Bottom Cleaning Router Bit 1/2″ Shank 1″ Cutter Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit - Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges. Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced. This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish.

 

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 14 Shank 1 Cutter Dia 58 inch Cutter Height Round Over Bit HSS High Speed Steel Trimming for Wood Plywood MDF Plastics

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 1″ Cutter Dia 5/8 inch Cutter Height Round Over Bit HSS High Speed Steel Trimming for Wood Plywood MDF Plastics

EnPoint Woodworking Carbide-Tipped Beadboard Router Bit 1/4″ Shank 1″ Cutter Dia 5/8 inch Cutter Height Round Over Bit HSS High Speed Steel Trimming for Wood Plywood MDF Plastics - Rout decorative and precisely grinding grooves will make your jobs smooth and clean with chips removal. Carbide-tipped, teflon coating, high-speed steel shank, more hardened and sharpened, heat resistant, durable service and long lifespan. Shank diameter 1/4 inch, cutter height 5/8 inch (16mm). Mainly used for cutting a variety of materials from wood, plywood, mdf and other wood composites, plastics, and solid surface etc. Cutter diameter 1 inch (254mm), overall length 2-1/4 inches (57mm).

 

Kempston 312011 Classical Roman Ogee Bit 14-Inch Shank 1-Inch Cutting Diameter 12-Inch Cutting Length 18-Inch Radius

Kempston 312011 Classical Roman Ogee Bit, 1/4-Inch Shank, 1-Inch Cutting Diameter, 1/2-Inch Cutting Length, 1/8-Inch Radius

Kempston 312011 Classical Roman Ogee Bit, 1/4-Inch Shank, 1-Inch Cutting Diameter, 1/2-Inch Cutting Length, 1/8-Inch Radius - Non-stick coating. C3 or c4 premium carbide. Cnc precision ground. Anti-kickback design. Prefessional grade.

 

CMT 80609511 Flush Trim bit 14-Inch Shank 1-Inch Cutting Length Carbide-Tipped

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped

CMT 806.095.11 Flush Trim bit, 1/4-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped - Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Super-strength superior steel, non-stick orange shield coating. For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers. 3/8-inch cutting diameter, 2-11/16-inch length, bearing included. 2 sinterhip hi-density industrial chrome carbide cutting edges.

 

RadiantOrchid Practical 14 Inch Keyless Drill Bit Chuck Quick Change Adapter Converter Hex Shank 03-36mm Clamping Range

RadiantOrchid Practical 1/4″ Inch Keyless Drill Bit Chuck Quick Change Adapter Converter Hex Shank 0.3-3.6mm Clamping Range

RadiantOrchid Practical 1/4″ Inch Keyless Drill Bit Chuck Quick Change Adapter Converter Hex Shank 0.3-3.6mm Clamping Range - Material drop forged #45 carbon steel. Unlimited use in automotives, garages, warehouses, offices, homes etc. Instantly convert impact driver to hold non-quick change drill & driver bits. 6mm. Quickly convert your quick change hex shank driver into a drill. Note due to lighting effects, monitor’s brightness , contrast settings etc, there could be some slight differences in the color tone of the pictures and the actual item. 3-3. 3mm) hex shank. Features brand new and high quality. Specification colorsilver(as the picture). Clamping range0. Packed safely in bubble bag. Connecting link 1/4¡±(6. Package included 1 x chuck quick change adapter no retail box. Keyless chuck finger-tightens for easy bit changes.

 

CMT 84900111 60° Lettering Bit 14-Inch Shank 1-Inch Diameter

CMT 849.001.11 60° Lettering Bit, 1/4-Inch Shank, 1-Inch Diameter

CMT 849.001.11 60° Lettering Bit, 1/4-Inch Shank, 1-Inch Diameter - Non-stick orange shield coating and anti-kickback design. Put bevel edges on the raised characters of relief lettering to reduce the risk of splitting. 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance. Designed specifically for routing signs, this profile allows you to create striking effects for signmaking. 3/4-inch cutting length, 60° cutting angle, 2-inch overall length.

 

Weiler Narrow Face Wire Wheel Conflex Brush Round Shank Stainless Steel 302 Crimped Wire 3 Diameter 0014 Wire Diameter 14 Shank 1 Bristle Length 12 Brush Face Width 20000 rpm

Weiler Narrow Face Wire Wheel Conflex Brush, Round Shank, Stainless Steel 302, Crimped Wire, 3″ Diameter, 0.014″ Wire Diameter, 1/4″ Shank, 1″ Bristle Length, 1/2″ Brush Face Width, 20000 rpm

Weiler Narrow Face Wire Wheel Conflex Brush, Round Shank, Stainless Steel 302, Crimped Wire, 3″ Diameter, 0.014″ Wire Diameter, 1/4″ Shank, 1″ Bristle Length, 1/2″ Brush Face Width, 20000 rpm - Narrow face crimped wire wheels for light-duty brushing action. Applicable for cleaning and finishing recessed areas or id die, mold and tool cleaning and polishing rubber and plastic flash removal rust and paint removal. Also used for deburring, spot facing weld, id pipe and carbon cleaning scale and slag removal.

 

Eazypower 82308 3764 x 6 Silver and Demming 135 Degree Split Point M2 High Speed Steel with 38 Shank 1 Piece

Eazypower 82308 37/64″ x 6″ Silver and Demming 135 Degree Split Point M2 High Speed Steel with 3/8″ Shank (1 Piece)

Eazypower 82308 37/64″ x 6″ Silver and Demming 135 Degree Split Point M2 High Speed Steel with 3/8″ Shank (1 Piece) - Eazypower offers over 17,000 original items including the patented hexbit drills and tub-o-tips rack. Eazypower corporation is a family owned company, started by the kozak family back in 1985. Other patented items include one-way screw removers, spin-it-out (damaged screw removers), 25in1 screwdrivers and more.

 

Kodiak Cutting Tools KCT136475 USA Made  Solid Carbide End Mill Long 4 Flute 14 Shank 1 Length of Cut 4 Overall Length 14 Diameter

Kodiak Cutting Tools KCT136475 USA Made Solid Carbide End Mill, Long, 4 Flute, 1/4″ Shank, 1″ Length of Cut, 4″ Overall Length, 1/4″ Diameter

Kodiak Cutting Tools KCT136475 USA Made Solid Carbide End Mill, Long, 4 Flute, 1/4″ Shank, 1″ Length of Cut, 4″ Overall Length, 1/4″ Diameter - 1/4 inch diameter solid carbide end mill, long 1/4″ shank 1″ length of cut 4″ overall length 4 flute carbide, long.

 

Forney 60001 End Brush Coarse Crimped Wire with 14-Inch Shank 1-Inch

Forney 60001 End Brush, Coarse Crimped Wire with 1/4-Inch Shank, 1-Inch

Forney 60001 End Brush, Coarse Crimped Wire with 1/4-Inch Shank, 1-Inch - Stem mounted wire end brush. Crimped style for light to medium duty applications. Removes rust, scale and paint in hard to reach areas. Designed for easy access into narrow holes and confined areas. Use with any 1/4-inch diameter electric power drill or pneumatic air drill.

 

Weiler Narrow Face Wire Wheel Conflex Brush Round Shank Steel Crimped Wire 3 Diameter 0008 Wire Diameter 14 Shank 1 Bristle Length 12 Brush Face Width 20000 rpm

Weiler Narrow Face Wire Wheel Conflex Brush, Round Shank, Steel, Crimped Wire, 3″ Diameter, 0.008″ Wire Diameter, 1/4″ Shank, 1″ Bristle Length, 1/2″ Brush Face Width, 20000 rpm

Weiler Narrow Face Wire Wheel Conflex Brush, Round Shank, Steel, Crimped Wire, 3″ Diameter, 0.008″ Wire Diameter, 1/4″ Shank, 1″ Bristle Length, 1/2″ Brush Face Width, 20000 rpm - Also used for deburring, spot facing weld, id pipe and carbon cleaning scale and slag removal. Applicable for cleaning and finishing recessed areas or id die, mold and tool cleaning and polishing rubber and plastic flash removal rust and paint removal. Narrow face crimped wire wheels for light-duty brushing action.

 

uxcell 14-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit

uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit

uxcell 1/4-inch Shank 1-inch Cutting Length Ball Bearing 45 Degree Chamfer Router Bit - Standard 1/4″ x 1″ package content 1 x chamfer bit. Cutting diameter 489mm/19″ cutting length 1″ shank diameter 1/4″. Weight 105g material metal. Overall length 65mm/26″ bearing diameter 13mm/05″ cutting angle 45 degree. Product name chamfer bit color silver tone.

 

IVY Classic 10814 34-Inch Straight Carbide Router Bit 14-Inch Shank 1Pouch

IVY Classic 10814 3/4-Inch Straight Carbide Router Bit, 1/4-Inch Shank, 1/Pouch

IVY Classic 10814 3/4-Inch Straight Carbide Router Bit, 1/4-Inch Shank, 1/Pouch - Ideal for cutting plywood, composition board, hard wood and soft wood. Width of cut (w) 3/4-inch, cutting depth (d) 1-inch, overall length (l) 2-3/16-inch, sturdy reusable pouch. Anti-kickback design ensures constant chip removal. Double fluted, c2 modified carbide ensures longest life and highest quality, diamond-honed for true cutting. 1/4-inch alloy-steel shank is tempered for strength.

 

EnPoint™ Carbide Right hand Thread End Mill Set 18 3175mm Shank 06-15mm Cutter Diameter Rough Milling Cutter Set of 10 pcs CNC Corn End Mills for Carbon Fiber Insulation Board Oak

EnPoint™ Carbide Right hand Thread End Mill Set 1/8″ 3.175mm Shank 0.6-1.5mm Cutter Diameter Rough Milling Cutter Set of 10 pcs CNC Corn End Mills for Carbon Fiber Insulation Board Oak

EnPoint™ Carbide Right hand Thread End Mill Set 1/8″ 3.175mm Shank 0.6-1.5mm Cutter Diameter Rough Milling Cutter Set of 10 pcs CNC Corn End Mills for Carbon Fiber Insulation Board Oak - Flute length(fl) 3mm, 4mm, 55mm, 6mm, 7mm, 75mm. Used for the engraving and cutting of pcb, carbon fiber board, insulation board and oak wood etc ideal for cutting, surface finish and burring. Cutter diameter(cd) 06mm, 07mm, 08mm, 09mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm. Shank diameter(sd) 1/8″ (3175mm) overall length(ol) 3/2″ (38mm). Made of ultra nano grade carbide, advanced polished & sharp, max strength tool and durable.

 

Klein Tools 661 no 1 Square-Recess Tip Screwdriver with 4-Inch Round-Shank1 Tip4-Inch Shank

Klein Tools 661 no. 1 Square-Recess Tip Screwdriver with 4-Inch Round-Shank,#1 Tip/4-Inch Shank

Klein Tools 661 no. 1 Square-Recess Tip Screwdriver with 4-Inch Round-Shank,#1 Tip/4-Inch Shank - Precision-machined tip for exact fit. Patented tip-ident quickly identifies the type of screwdriver and screwdriver tip orientation. Overall length 7-3/4 inches (197 mm). Cushion-grip handle allows for greater torque and comfort. Point size no 1.

 

IVY Classic 46104 14 x 3-18-Inch Forstner Bit High-Speed Steel 38-Inch Shank 1Card

IVY Classic 46104 1/4 x 3-1/8-Inch Forstner Bit, High-Speed Steel, 3/8-Inch Shank, 1/Card

IVY Classic 46104 1/4 x 3-1/8-Inch Forstner Bit, High-Speed Steel, 3/8-Inch Shank, 1/Card - High-speed steel construction with rockwell hardness 52-56. Two-cutter design for maximum cutting and chip removal. Designed to cut clean, smooth pocket holes, angled holes and flat bottom holes in wood and plywood, swift bore (registered trademark). Diameter 1/4-inch, length 3-1/8-inch, shank 3/8-inch. Tapered rim cuts clean, smooth holes while sharp spur centers and guides the bit.

 

Forney 60033 Mounted Grinding Point with 14-Inch Shank 1-Inch-by-1-Inch

Forney 60033 Mounted Grinding Point with 1/4-Inch Shank, 1-Inch-by-1-Inch

Forney 60033 Mounted Grinding Point with 1/4-Inch Shank, 1-Inch-by-1-Inch - Shank mounted points and grinding wheels are made from durable high grade 60 grit aluminum oxide. Perfect for grinding, polishing or deburring ferrous metals. Max rpm is 35,000. Especially useful where larger wheels will not fit or where small abrasive wheels wear out too quickly. Use with 1/4-inch chuck for high speed drills.

 

IVY Classic 10904 34-Inch Pattern Cutting Carbide Router Bit with Upper Ball Bearing 14-Inch Shank 1Pouch

IVY Classic 10904 3/4-Inch Pattern Cutting Carbide Router Bit with Upper Ball Bearing, 1/4-Inch Shank, 1/Pouch

IVY Classic 10904 3/4-Inch Pattern Cutting Carbide Router Bit with Upper Ball Bearing, 1/4-Inch Shank, 1/Pouch - Double fluted, c2 modified carbide ensures longest life and highest quality, diamond-honed for true cutting. Ideal for cutting plywood, composition board, hard wood and soft wood. Width of cut (w) 3/4-inch, cutting depth (d) 1-inch, overall length (l) 2-3/4-inch, sturdy reusable pouch. Anti-kickback design ensures constant chip removal and 1/4-inch alloy-steel shank is tempered for strength. Shielded upper ball bearing guide prevents burning and marring (ball bearing replacement ivy classic 10967).

 

IVY Classic 10822 12-Inch Laminate Trim Carbide Router Bit with Ball Bearing Guide Triple Fluted 14-Inch Shank 1Pouch

IVY Classic 10822 1/2-Inch Laminate Trim Carbide Router Bit with Ball Bearing Guide, Triple Fluted, 1/4-Inch Shank, 1/Pouch

IVY Classic 10822 1/2-Inch Laminate Trim Carbide Router Bit with Ball Bearing Guide, Triple Fluted, 1/4-Inch Shank, 1/Pouch - Shielded ball bearing guide prevents burning and marring (replacement ball bearing ivy classic 10964). Ideal for trimming laminates, veneers, hard wood and soft wood. Width of cut (w) 1/2-inch, cutting depth (d) 1-inch, overall length (l) 2-1/4-inch, sturdy reusable pouch. Anti-kickback design ensures constant chip removal and 1/4-inch alloy-steel shank is tempered for strength. Triple fluted, c2 modified carbide ensures longest life and highest quality, diamond-honed for true cutting.

 

Kempston 204451 Round Nose Bit 12-Inch Shank 1-Inch Cutting Diameter by 1-14-Inch Cutting Length

Kempston 204451 Round Nose Bit, 1/2-Inch Shank, 1-Inch Cutting Diameter by 1-1/4-Inch Cutting Length

Kempston 204451 Round Nose Bit, 1/2-Inch Shank, 1-Inch Cutting Diameter by 1-1/4-Inch Cutting Length - Non-stick coating. Prefessional grade. C3 or c4 premium carbide. Anti-kickback design. Cnc precision ground.

 

CMT 80669111 Super-Duty Flush Trim Bit 12-Inch Shank 1-Inch Cutting Length Carbide-Tipped

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped

CMT 806.691.11 Super-Duty Flush Trim Bit, 1/2-Inch Shank, 1-Inch Cutting Length, Carbide-Tipped - 3/4-inch cutting diameter, 3-13/32-inch length, bearing included. Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Super-strength superior steel, non-stick orange shield coating. 2 sinterhip hi-density industrial chrome carbide cutting edges. For cutting hardwood/softwood, laminates use on router tables only, not for hand-held routers.

 

Woodwork Table Top Surface Planing Bottom Cleaning Router Bit 14 Shank 1 Cut Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit for Harwood MDF

Woodwork Table Top Surface Planing Bottom Cleaning Router Bit 1/4″ Shank 1″ Cut Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit for Harwood MDF

Woodwork Table Top Surface Planing Bottom Cleaning Router Bit 1/4″ Shank 1″ Cut Dia Industrial Quality Topmount Trim Router Bit Couter-top Plunge Router Bit Edge Sink Router Bit for Harwood MDF - This carbide-tipped bit use a two-flute bit where fine finish is paramount and two flutes coulld balance the bit, eliminating vibration that degrades the cut finish. Two carefully engineered flutes cut aggressively and cleanly, and cut per revolution yield a smooth surface, but feed rate is slightly reduced. Used to flatten large wood slabs and level a workbench or piece of wood runs smooth, no burning, cuts clean and fast. Mainly used for cutting and smoothing a variety of materials from wood, plywood, mdf and other wood composites, plastics, fiberglass, and solid surface etc. Works well for surfacing the spoil board on a cnc machine and homemade sliding frame to smooth the rough face of a wood slab, excellent for cutting the mortise for butt door hinges.

 

CMT 81125411 Straight Bit 14-Inch Shank 1-Inch Diameter

CMT 811.254.11 Straight Bit, 1/4-Inch Shank, 1-Inch Diameter

CMT 811.254.11 Straight Bit, 1/4-Inch Shank, 1-Inch Diameter - Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Smooth and precise cut exceptional chip ejection to allow cleaner and more constant cutting. 3/4-inch cutting length, 2-inch length, 2 cutting edges. Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints. To be used on wood and wood composites.

 

IVY Classic 10900 12-Inch Pattern Cutting Carbide Router Bit with Upper Ball Bearing 14-Inch Shank 1Pouch

IVY Classic 10900 1/2-Inch Pattern Cutting Carbide Router Bit with Upper Ball Bearing, 1/4-Inch Shank, 1/Pouch

IVY Classic 10900 1/2-Inch Pattern Cutting Carbide Router Bit with Upper Ball Bearing, 1/4-Inch Shank, 1/Pouch - Shielded upper ball bearing guide prevents burning and marring (ball bearing replacement ivy classic 10965). Anti-kickback design ensures constant chip removal and 1/4-inch alloy-steel shank is tempered for strength. Width of cut (w) 1/2-inch, cutting depth (d) 1-inch, overall length (l) 2-11/16-inch, sturdy reusable pouch. Ideal for cutting plywood, composition board, hard wood and soft wood. Double fluted, c2 modified carbide ensures longest life and highest quality, diamond-honed for true cutting.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.