Top 25 Best Vacuum Ranges

 

Fluke Calibration CWS3011-INHG Conversion Weight Set for P3011 Vacuum and Dual VacuumPressure Model Pneumatic Deadweight Tester Available Vacuum Range Unit inHg

Fluke Calibration CWS3011-INHG Conversion Weight Set for P3011 Vacuum and Dual Vacuum/Pressure Model Pneumatic Deadweight Tester, Available Vacuum Range Unit inHg

Fluke Calibration CWS3011-INHG Conversion Weight Set for P3011 Vacuum and Dual Vacuum/Pressure Model Pneumatic Deadweight Tester, Available Vacuum Range Unit inHg - Each weight set includes a replacement low-pressure weight carrier table and a replacement high-pressure weight carrier ring. Fluke calibration cws3011-inhg conversion weight set for fluke p3011 vacuum and dual vacuum/pressure model pneumatic deadweight tester, available vacuum range unit inhgfluke calibration conversion weight sets allow a deadweight tester to calibrate in different pressure units without the need to perform conversion calculations. The weight sets are adjusted to the correct mass for use with the existing piston. These items are simply exchanged for the original items when using the conversion weights.

 

Fluke Calibration P5510-2M Pneumatic Comparison Test Pump 0-300 psi Pressure Range 0-24 inHg Vacuum Range

Fluke Calibration P5510-2M Pneumatic Comparison Test Pump, 0-300 psi Pressure Range, 0-24 inHg Vacuum Range

Fluke Calibration P5510-2M Pneumatic Comparison Test Pump, 0-300 psi Pressure Range, 0-24 inHg Vacuum Range - This pneumatic comparison test pump is designed for testing pressure measuring instruments against master test instruments. This cost effective instrument provides precise control for important calibration requirements and include many features found in our popular line of pneumatic deadweight testers.

 

WIKA 9690128 Commercial Pressure Gauge Dry-Filled Copper Alloy Wetted Parts 1-12 Dial 0-30Hg Vacuum Range -323 Accuracy 18 Male NPT Connection Center Back Mount

WIKA 9690128 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 1-1/2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/8″ Male NPT Connection, Center Back Mount

WIKA 9690128 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 1-1/2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/8″ Male NPT Connection, Center Back Mount - Circular dial is enclosed in an abs plastic case for durability in high-impact environments. Male connection with 1/8″ or 1/4″ npt rate. Copper alloy wetted parts for high corrosion resistance against salty liquids. Display accuracy ranges + or, 25 percent of span or + or, 3/2/3 percent of span over the entire range of the gauge over the entire range of the gauge. Pressure ranges up to 5,000 psi.

 

Supco VG640   Vacuum Sentry With Local Alarm LCD Display 0-19000 microns Range 10 Accuracy 14 Male Flare Fitting Connection

Supco VG640 Vacuum Sentry With Local Alarm, LCD Display, 0-19000 microns Range, 10% Accuracy, 1/4″ Male Flare Fitting Connection

Supco VG640 Vacuum Sentry With Local Alarm, LCD Display, 0-19000 microns Range, 10% Accuracy, 1/4″ Male Flare Fitting Connection - Remote alarm (r100) up to 400 feet remote audible, visual and vibrating alarm for high and low vacuum. Auto shutoff 8 hours when alarms are active. Connector type standard 1/4 inch male flare fitting. Weight 6 oz. When alarms are disabled 10 minutes when vacuum reading is above 19000 microns, 1 hour when vacuum reading is below 19000 microns. Combining unmatched performance with ultimate productivity, the vacuum sentry (v640 series) guards system service activity and provides notification when pre-set alarm thresholds are reached. Radio frequency (rf). Units micron, millibar, pascal, torr, millitorr. Accuracy +/-10 percent or +/-10 micron, whichever is larger (50 to 2000 microns) at 75 degree f. Update rate 0. Alarm volume 87 db for both unit and remote. Auto shut off. Overpressure 800 psi max (55 bar). 5 micron, 140-400 1 micron, 400-800 2 micron, 800-2000 5 micron, 2000-6000 20 micron, 6000-9000 100 micron, 6000-16000 200 micron, 16000-19000 1000 micron. Built-in hanger. Power source 3 aa batteries. Resolution 0-140 0. Sensor type thermistor. 5 second. One year warranty. Vacuum range 0, 19000 micron (0, 2600 pascal). Measures 2-3/4″ width 5-1/2″ height by 1-1/2″ depth 1 year warranty. The vg640 with local audible and visual alarms. Battery life 600 hours continuous usage, with battery indicator. Applications vacuum measurements during system evacuation, measurements to confirm system leaks, high precision laboratory tests. Alarm audible and visual alarm for high and low vacuum. Operating temperature range 0 degree f to 150 degree f ( -17 degree c to 65 degree c).

 

WIKA 8990039 Commercial Pressure Gauge Dry-Filled Copper Alloy Wetted Parts 2 Dial 0-30Hg Vacuum Range -323 Accuracy 18 Male NPT Connection Bottom Mount

WIKA 8990039 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/8″ Male NPT Connection, Bottom Mount

WIKA 8990039 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/8″ Male NPT Connection, Bottom Mount - Male connection with 1/8″ or 1/4″ npt rate. Copper alloy wetted parts for high corrosion resistance against salty liquids. Display accuracy ranges + or, 25 percent of span or + or, 3/2/3 percent of span over the entire range of the gauge over the entire range of the gauge. Pressure ranges up to 5,000 psi. Circular dial is enclosed in an abs plastic case for durability in high-impact environments.

 

Fluke Calibration CWS3011-MMHG Conversion Weight Set for P3011 Vacuum and Dual VacuumPressure Model Pneumatic Deadweight Tester Available Vacuum Range Unit mmHg

Fluke Calibration CWS3011-MMHG Conversion Weight Set for P3011 Vacuum and Dual Vacuum/Pressure Model Pneumatic Deadweight Tester, Available Vacuum Range Unit mmHg

Fluke Calibration CWS3011-MMHG Conversion Weight Set for P3011 Vacuum and Dual Vacuum/Pressure Model Pneumatic Deadweight Tester, Available Vacuum Range Unit mmHg - Fluke calibration cws3011-mmhg conversion weight set for fluke p3011 vacuum and dual vacuum/pressure model pneumatic deadweight tester, available vacuum range unit mmhgfluke calibration conversion weight sets allow a deadweight tester to calibrate in different pressure units without the need to perform conversion calculations. The weight sets are adjusted to the correct mass for use with the existing piston. These items are simply exchanged for the original items when using the conversion weights. Each weight set includes a replacement low-pressure weight carrier table and a replacement high-pressure weight carrier ring.

 

WIKA 9692139 Industrial Pressure Gauge LiquidRefillable Copper Alloy Wetted Parts 2-12 Dial 0-30Hg Vacuum bar Range - 212 Accuracy 14 Male NPT Connection Center Back Mount

WIKA 9692139 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum (bar) Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Center Back Mount

WIKA 9692139 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum (bar) Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Center Back Mount - Pressure ranges from 15 psi to 15,000 psi. Circular dial is enclosed in a stainless steel case that resists corrosion against most samples. Male connection with 1/8″, 1/4″, or 1/2″ npt rate. Display accuracy ranges from + or, 1 percent of span to + or, 2/1/2 percent of span over the entire range of the gauge. Copper alloy wetted parts for high corrosion resistance against salty liquids.

 

WIKA 9833646 Industrial Pressure Gauge Refillable Stainless Steel 316L Wetted Parts 2-12 Dial 0-30Hg Vacuum Range - 212 Accuracy 14 Male NPT Connection Bottom Mount

WIKA 9833646 Industrial Pressure Gauge, Refillable, Stainless Steel 316L Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Bottom Mount

WIKA 9833646 Industrial Pressure Gauge, Refillable, Stainless Steel 316L Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Bottom Mount - Stainless steel 316l wetted parts for chloride corrosion resistance. Pressure ranges from 15 psi to 15,000 psi. Male connection with 1/8″, 1/4″, or 1/2″ npt rate. Circular dial is enclosed in a stainless steel case that resists corrosion. Display accuracy ranges + or, 25 percent of span, + or, 2/1/2 percent of span, or + or, 1 percent of span over the entire range of the gauge.

 

WIKA 9691957 Industrial Pressure Gauge LiquidRefillable Copper Alloy Wetted Parts 2-12 Dial 0-30Hg Vacuum bar Range - 212 Accuracy 14 Male NPT Connection Bottom Mount

WIKA 9691957 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum (bar) Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Bottom Mount

WIKA 9691957 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum (bar) Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Bottom Mount - Male connection with 1/8″, 1/4″, or 1/2″ npt rate. Copper alloy wetted parts for high corrosion resistance against salty liquids. Pressure ranges from 15 psi to 15,000 psi. Display accuracy ranges from + or, 1 percent of span to + or, 2/1/2 percent of span over the entire range of the gauge. Circular dial is enclosed in a stainless steel case that resists corrosion against most samples.

 

Control Devices VR Series Brass Vacuum Relief Valve 0-30 Hg Vacuum Range 34 Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 3/4″ Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 3/4″ Male NPT - Control devices manufactures valves and other flow control devices. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation. The valve is factory preset to open at 20 pounds per square inch (psi) and has a flow rate of 10 cubic feet per minute (cfm). The valve’s brass body, stainless steel spring, nylon poppet, and nitrile seal resist corrosion and can be used in operating temperatures up to 250 degrees f. This proportional-type relief valve opens at a rate relative to the increase in vacuum pressure, and can be adjusted to open between 0 and 30″ hg (inches of mercury) using the knurled adjustment screw and locking jam nut. This control devices vr75-100 vacuum relief valve has a brass body, an adjustable relief pressure, and a 3/4″ male npt threaded inlet connection. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves remove excess pressure or vacuum from a system. This vacuum relief valve is suitable for use in vacuum applications such as to prevent a tank from collapsing while it is being emptied or after a sterilization-in-place (sip) procedure. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. The company, founded in 1963, is headquartered in fenton, mo.

 

WIKA 4270755 Industrial Pressure Gauge DryLiquid-Fillable Copper Alloy Wetted Parts 2-12 Dial 0-30Hg Vacuum Range - 212 Accuracy 14 Male NPT Connection Center Back Mount

WIKA 4270755 Industrial Pressure Gauge, Dry/Liquid-Fillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Center Back Mount

WIKA 4270755 Industrial Pressure Gauge, Dry/Liquid-Fillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Center Back Mount - Circular dial is enclosed in a stainless steel case that resists corrosion against most samples. Display accuracy ranges from + or, 1 percent of span to + or, 2/1/2 percent of span over the entire range of the gauge. Copper alloy wetted parts for high corrosion resistance against salty liquids. Pressure ranges from 15 psi to 15,000 psi. Male connection with 1/8″, 1/4″, or 1/2″ npt rate.

 

WIKA 9767185 Industrial Pressure Gauge LiquidRefillable Copper Alloy Wetted Parts 2-12 Dial 0-30Hg Vacuum Range - 212 Accuracy 14 Male NPT Connection Center Back Mount

WIKA 9767185 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Center Back Mount

WIKA 9767185 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Center Back Mount - Display accuracy ranges from + or, 1 percent of span to + or, 2/1/2 percent of span over the entire range of the gauge. Pressure ranges from 15 psi to 15,000 psi. Copper alloy wetted parts for high corrosion resistance against salty liquids. Circular dial is enclosed in a stainless steel case that resists corrosion against most samples. Male connection with 1/8″, 1/4″, or 1/2″ npt rate.

 

WIKA 9747214 Commercial Pressure Gauge Dry-Filled Copper Alloy Wetted Parts 1-12 Dial 0-30Hg Vacuum Range -323 Accuracy 18 Male NPT Connection Bottom Mount

WIKA 9747214 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 1-1/2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/8″ Male NPT Connection, Bottom Mount

WIKA 9747214 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 1-1/2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/8″ Male NPT Connection, Bottom Mount - Display accuracy ranges + or, 25 percent of span or + or, 3/2/3 percent of span over the entire range of the gauge over the entire range of the gauge. Circular dial is enclosed in an abs plastic case for durability in high-impact environments. Copper alloy wetted parts for high corrosion resistance against salty liquids. Pressure ranges up to 5,000 psi. Male connection with 1/8″ or 1/4″ npt rate.

 

WIKA 9734826 Industrial Pressure Gauge Dry-Filled Stainless Steel 316L Wetted Parts  4  Dial 0-30Hg Vacuum Range - 1 Accuracy 12 Male NPT Connection Bottom Mount

WIKA 9734826 Industrial Pressure Gauge, Dry-Filled, Stainless Steel 316L Wetted Parts, 4″ Dial, 0-30″Hg Vacuum Range, +/- 1% Accuracy, 1/2″ Male NPT Connection, Bottom Mount

WIKA 9734826 Industrial Pressure Gauge, Dry-Filled, Stainless Steel 316L Wetted Parts, 4″ Dial, 0-30″Hg Vacuum Range, +/- 1% Accuracy, 1/2″ Male NPT Connection, Bottom Mount - Stainless steel 316l wetted parts for chloride corrosion resistance. Pressure ranges from 15 psi to 15,000 psi. Male connection with 1/8″, 1/4″, or 1/2″ npt rate. Circular dial is enclosed in a stainless steel case that resists corrosion. Display accuracy ranges + or, 25 percent of span, + or, 2/1/2 percent of span, or + or, 1 percent of span over the entire range of the gauge.

 

Control Devices VR Series Brass Vacuum Relief Valve 0-30 Hg Vacuum Range 1 Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 1″ Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 1″ Male NPT - This vacuum relief valve is suitable for use in vacuum applications such as to prevent a tank from collapsing while it is being emptied or after a sterilization-in-place (sip) procedure. The company, founded in 1963, is headquartered in fenton, mo. Control devices manufactures valves and other flow control devices. This proportional-type relief valve opens at a rate relative to the increase in vacuum pressure, and can be adjusted to open between 0 and 30″ hg (inches of mercury) using the knurled adjustment screw and locking jam nut. Relief valves remove excess pressure or vacuum from a system. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation. This control devices vr10-013 vacuum relief valve has a brass body, an adjustable relief pressure, and a 1″ male npt threaded inlet connection. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. The valve’s brass body, stainless steel spring, nylon poppet, and nitrile seal resist corrosion and can be used in operating temperatures up to 250 degrees f. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. The valve is preset to open at 20 pounds per square inch (psi) and has a flow rate of 15 cubic feet per minute (cfm). Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates.

 

WIKA 9747473 Capsule Low Pressure Gauge Dry-Filled Copper Alloy Wetted Parts 2-12 Dial 0-100WC Vacuum mmWC Range -15 Accuracy 14 Male NPT Connection Bottom Mount

WIKA 9747473 Capsule Low Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-100″WC Vacuum (mmWC) Range, +/-1.5% Accuracy, 1/4″ Male NPT Connection, Bottom Mount

WIKA 9747473 Capsule Low Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-100″WC Vacuum (mmWC) Range, +/-1.5% Accuracy, 1/4″ Male NPT Connection, Bottom Mount - Copper alloy wetted parts for high corrosion resistance against salty liquids. Display accuracy is + or, 15 percent of span over the entire range of the gauge. Male connection with 1/8″ or 1/4″ npt rate. Circular dial is two and one-half inches in diameter and is enclosed in a steel case for increased durability in high-vibration environments. Low pressure ranges to 10 psi or 60 inches of water.

 

Control Devices VR Series Brass Vacuum Relief Valve 0-30 Hg Vacuum Range 38 Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 3/8″ Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 3/8″ Male NPT - The company, founded in 1963, is headquartered in fenton, mo. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. This vacuum relief valve is suitable for use in vacuum applications such as to prevent a tank from collapsing while it is being emptied or after a sterilization-in-place (sip) procedure. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. The valve’s brass body, stainless steel spring, nylon poppet, and nitrile seal resist corrosion and can be used in operating temperatures up to 250 degrees f. This proportional-type relief valve opens at a rate relative to the increase in vacuum pressure, and can be adjusted to open between 0 and 30″ hg (inches of mercury) using the knurled adjustment screw and locking jam nut. This control devices vr38-100 vacuum relief valve has a brass body, an adjustable relief pressure, and a 3/8″ male npt threaded inlet connection. The valve is factory preset to open at 20 pounds per square inch (psi) and has a flow rate of 5 cubic feet per minute (cfm). Relief valves remove excess pressure or vacuum from a system. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Control devices manufactures valves and other flow control devices. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates.

 

WIKA 4252901 Commercial Pressure Gauge Dry-Filled Copper Alloy Wetted Parts 2 Dial 0-30Hg Vacuum Range -323 Accuracy 14 Male NPT Connection Bottom Mount

WIKA 4252901 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/4″ Male NPT Connection, Bottom Mount

WIKA 4252901 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2″ Dial, 0-30″Hg Vacuum Range, +/-3/2/3% Accuracy, 1/4″ Male NPT Connection, Bottom Mount - Display accuracy ranges + or, 25 percent of span or + or, 3/2/3 percent of span over the entire range of the gauge over the entire range of the gauge. Pressure ranges up to 5,000 psi. Circular dial is enclosed in an abs plastic case for durability in high-impact environments. Male connection with 1/8″ or 1/4″ npt rate. Copper alloy wetted parts for high corrosion resistance against salty liquids.

 

WIKA 9767002 Industrial Pressure Gauge LiquidRefillable Copper Alloy Wetted Parts 2-12 Dial 0-30Hg Vacuum Range - 212 Accuracy 14 Male NPT Connection Bottom Mount

WIKA 9767002 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Bottom Mount

WIKA 9767002 Industrial Pressure Gauge, Liquid/Refillable, Copper Alloy Wetted Parts, 2-1/2″ Dial, 0-30″Hg Vacuum Range, +/- 2/1/2% Accuracy, 1/4″ Male NPT Connection, Bottom Mount - Pressure ranges from 15 psi to 15,000 psi. Circular dial is enclosed in a stainless steel case that resists corrosion against most samples. Copper alloy wetted parts for high corrosion resistance against salty liquids. Male connection with 1/8″, 1/4″, or 1/2″ npt rate. Display accuracy ranges from + or, 1 percent of span to + or, 2/1/2 percent of span over the entire range of the gauge.

 

WIKA 4231422 Commercial Pressure Gauge Dry-Filled Copper Alloy Wetted Parts 2 Dial 0-30Hg Vacuum kPa Range -323 Accuracy 14 Male NPT Connection Center Back Mount

WIKA 4231422 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2″ Dial, 0-30″Hg Vacuum (kPa) Range, +/-3/2/3% Accuracy, 1/4″ Male NPT Connection, Center Back Mount

WIKA 4231422 Commercial Pressure Gauge, Dry-Filled, Copper Alloy Wetted Parts, 2″ Dial, 0-30″Hg Vacuum (kPa) Range, +/-3/2/3% Accuracy, 1/4″ Male NPT Connection, Center Back Mount - Male connection with 1/8″ or 1/4″ npt rate. Pressure ranges up to 5,000 psi. Copper alloy wetted parts for high corrosion resistance against salty liquids. Circular dial is enclosed in an abs plastic case for durability in high-impact environments. Display accuracy ranges + or, 25 percent of span or + or, 3/2/3 percent of span over the entire range of the gauge over the entire range of the gauge.

 

Supco VG64   Vacuum Gauge Digital Display 0-12000 microns Range 10 Accuracy 14 Male Flare Fitting Connection

Supco VG64 Vacuum Gauge, Digital Display, 0-12000 microns Range, 10% Accuracy, 1/4″ Male Flare Fitting Connection

Supco VG64 Vacuum Gauge, Digital Display, 0-12000 microns Range, 10% Accuracy, 1/4″ Male Flare Fitting Connection - Backlit, lcd digital display of seven international units including microns, pascal, and psi, and a 1/2-second response time. Auto shut-off eight hours after alarm activation, and when alarm is disabled. Programmable, audible and visual alarm for high and low vacuum indicates when threshold is reached. Vacuum gauge with ultra-fine resolution (05 to 1000 micron), and a 0-12,000 micron vacuum range for accurate pressure measurement during system evacuation, and high-precision laboratory tests. Built-in hanging apparatus for maneuverability.

 

Fluke Calibration CWS3011-KPA Conversion Weight Set for P3011 Vacuum and Dual VacuumPressure Model Pneumatic Deadweight Tester Available Vacuum Range Unit kPa

Fluke Calibration CWS3011-KPA Conversion Weight Set for P3011 Vacuum and Dual Vacuum/Pressure Model Pneumatic Deadweight Tester, Available Vacuum Range Unit kPa

Fluke Calibration CWS3011-KPA Conversion Weight Set for P3011 Vacuum and Dual Vacuum/Pressure Model Pneumatic Deadweight Tester, Available Vacuum Range Unit kPa - Each weight set includes a replacement low-pressure weight carrier table and a replacement high-pressure weight carrier ring. Fluke calibration cws3011-kpa conversion weight set for fluke p3011 vacuum and dual vacuum/pressure model pneumatic deadweight tester, available vacuum range unit kpa. These items are simply exchanged for the original items when using the conversion weights. Fluke calibration conversion weight sets allow a deadweight tester to calibrate in different pressure units without the need to perform conversion calculations. The weight sets are adjusted to the correct mass for use with the existing piston.

 

Supco VG640T   Vacuum Sentry With Local Alarm and Remote Alarm LCD Display 0-19000 microns Range 10 Accuracy 14 Male Flare Fitting Connection

Supco VG640T Vacuum Sentry With Local Alarm and Remote Alarm, LCD Display, 0-19000 microns Range, 10% Accuracy, 1/4″ Male Flare Fitting Connection

Supco VG640T Vacuum Sentry With Local Alarm and Remote Alarm, LCD Display, 0-19000 microns Range, 10% Accuracy, 1/4″ Male Flare Fitting Connection - Power source 3 aa batteries. Measures 2-3/4″ width 5-1/2″ height by 1-1/2″ depth 1 year warranty. Weight 6 oz. Remote alarm (r100) up to 400 feet remote audible, visual and vibrating alarm for high and low vacuum. 5 micron, 140-400 1 micron, 400-800 2 micron, 800-2000 5 micron, 2000-6000 20 micron, 6000-9000 100 micron, 6000-16000 200 micron, 16000-19000 1000 micron. Overpressure 800 psi max (55 bar). Alarm volume 87 db for both unit and remote. Radio frequency (rf) transmission signal (vg640t). Auto shut off. Vacuum range 0, 19000 micron (0 – 2600 pascal). Alarm audible and visual alarm for high and low vacuum. Resolution 0-140 0. Units micron, millibar, pascal, torr, millitorr. Applications vacuum measurements during system evacuation, measurements to confirm system leaks, high precision laboratory tests. User addressable remote alarm(r100) available (operates with vg640t only). Update rate 0. Battery life 600 hours continuous usage, with battery indicator. Combining unmatched performance with ultimate productivity, the vacuum sentry (v640 series) guards system service activity and provides notification when pre-set alarm thresholds are reached. Connector type standard 1/4 inch male flare fitting. Sensor type thermistor. The vg640t which adds the remote alarm receiver (r100) with audible, visual and vibration alarms. Operating temperature range 0 degree f to 150 degree f ( -17 degree c to 65 degree c). Accuracy +/-10 percent or +/-10 micron, whichever is larger (50 to 2000 microns) at 75 degree f. When alarms are disabled 10 minutes when vacuum reading is above 19000 microns, 1 hour when vacuum reading is below 19000 microns. 5 second. Built-in hanger. Auto shutoff 8 hours when alarms are active. One year warranty.

 

Control Devices VR Series Brass Vacuum Relief Valve 0-30 Hg Vacuum Range 14 Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 1/4″ Male NPT

Control Devices VR Series Brass Vacuum Relief Valve, 0-30″ Hg Vacuum Range, 1/4″ Male NPT - Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves remove excess pressure or vacuum from a system. This proportional-type relief valve opens at a rate relative to the increase in vacuum pressure, and can be adjusted to open between 0 and 30″ hg (inches of mercury) using the knurled adjustment screw and locking jam nut. Control devices manufactures valves and other flow control devices. The valve’s brass body, stainless steel spring, nylon poppet, and nitrile seal resist corrosion and can be used in operating temperatures up to 250 degrees f. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation. The valve is factory preset to open at 20 pounds per square inch (psi) and has a flow rate of 2 cubic feet per minute (cfm). The company, founded in 1963, is headquartered in fenton, mo. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. This vacuum relief valve is suitable for use in vacuum applications such as to prevent a tank from collapsing while it is being emptied or after a sterilization-in-place (sip) procedure. This control devices vr25-100 vacuum relief valve has a brass body, an adjustable relief pressure, and a 1/4″ male npt threaded inlet connection.

 

MeterTo Vacuum Aspiration System SAFEVAC Vacuum Aspirator Vacuum Range 0-600mbar Aspirating Speed 1-15mLS

MeterTo Vacuum Aspiration System SAFEVAC Vacuum Aspirator Vacuum Range: 0-600mbar, Aspirating Speed: 1-15mL/S

MeterTo Vacuum Aspiration System SAFEVAC Vacuum Aspirator Vacuum Range: 0-600mbar, Aspirating Speed: 1-15mL/S - Wide range of adapters to fit tube, microplate and disk plate for various tasks. Lid, tubing and handle are easy for disassembling, cleaning and autoclaving. Fully autoclavable waste collection bottle, tubing and handle. Interchangeable hand operator -tip adapters make it suitable for various tasks from single channel to 8-channel based on the applications in tube, micro plate, disk plate etc. Sensitive level sensor to prevent liquid overflow during operation.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.